architecture
It broke MultiSource/Applications/JM/ldecod/ldecod on armv7 thumb O0 g and armv7
thumb O3.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161736 91177308-0d34-0410-b5e6-96231b3b80d8
- FCMOV only supports a subset of X86 conditions. Skip boolean
simplification if X86 condition is not valid for FCMOV.
- add a minimal test case for PR13577.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161732 91177308-0d34-0410-b5e6-96231b3b80d8
FeatureFastUAMem for Nehalem, Westmere and Sandy Bridge.
FeatureFastUAMem is already on if we pass in nehalem or westmere as a command
argument.
rdar: 7252306
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161717 91177308-0d34-0410-b5e6-96231b3b80d8
- if a boolean test (X86ISD::CMP or X86ISD:SUB) checks a boolean value
generated from X86ISD::SETCC, try to simplify the boolean value
generation and checking by reusing the original EFLAGS with proper
condition code
- add hooks to X86 specific SETCC/BRCOND/CMOV, the major 3 places
consuming EFLAGS
part of patches fixing PR12312
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161687 91177308-0d34-0410-b5e6-96231b3b80d8
When replacing Old with New, it can happen that New is already a
successor. Add the old and new edge weights instead of creating a
duplicate edge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161653 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it possible to speed up def_iterator by stopping at the first
use. This makes def_empty() and getUniqueVRegDef() much faster when
there are many uses.
In a +Asserts build, LiveVariables is 100x faster in one case because
getVRegDef() has an assertion that would scan to the end of a
def_iterator chain.
Spill weight calculation is significantly faster (300x in one case)
because isTriviallyReMaterializable() calls MRI->isConstantPhysReg(%RIP)
which calls def_empty(%RIP).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161634 91177308-0d34-0410-b5e6-96231b3b80d8
Use a more conventional doubly linked list where the Prev pointers form
a cycle. This means it is no longer necessary to adjust the Prev
pointers when reallocating the VRegInfo array.
The test changes are required because the register allocation hint is
using the use-list order to break ties.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161633 91177308-0d34-0410-b5e6-96231b3b80d8
This patch corrects the definition of umlal/smlal instructions and adds support
for matching them to the ARM dag combiner.
Bug 12213
Patch by Yin Ma!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161581 91177308-0d34-0410-b5e6-96231b3b80d8
There are situations where inline ASM may want to change the section -- for
instance, to create a variable in the .data section. However, it cannot do this
without (potentially) restoring to the wrong section. E.g.:
asm volatile (".section __DATA, __data\n\t"
".globl _fnord\n\t"
"_fnord: .quad 1f\n\t"
".text\n\t"
"1:" :::);
This may be wrong if this is inlined into a function that has a "section"
attribute. The user should use `.pushsection' and `.popsection' here instead.
The addition of `.previous' is added for completeness.
<rdar://problem/12048387>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161477 91177308-0d34-0410-b5e6-96231b3b80d8
We perform the following:
1> Use SUB instead of CMP for i8,i16,i32 and i64 in ISel lowering.
2> Modify MachineCSE to correctly handle implicit defs.
3> Convert SUB back to CMP if possible at peephole.
Removed pattern matching of (a>b) ? (a-b):0 and like, since they are handled
by peephole now.
rdar://11873276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161462 91177308-0d34-0410-b5e6-96231b3b80d8
multiple scalar promotions on a single loop. This also has the effect of
preserving the order of stores sunk out of loops, which is aesthetically
pleasing, and it happens to fix the testcase in PR13542, though it doesn't
fix the underlying problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161459 91177308-0d34-0410-b5e6-96231b3b80d8
An unsigned value converted to floating-point will always be greater than
a negative constant. Unfortunately InstCombine reversed the check so that
unsigned values were being optimized to always be greater than all positive
floating-point constants. <rdar://problem/12029145>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161452 91177308-0d34-0410-b5e6-96231b3b80d8
and "instruction address -> file/line" lookup.
Instead of plain collection of rows, debug line table for compilation unit is now
treated as the number of row ranges, describing sequences (series of contiguous machine
instructions). The sequences are not always listed in the order of increasing
address, so previously used std::lower_bound() sometimes produced wrong results.
Now the instruction address lookup consists of two stages: finding the correct
sequence, and searching for address in range of rows for this sequence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161414 91177308-0d34-0410-b5e6-96231b3b80d8
We give a bonus for every argument because the argument setup is not needed
anymore when the function is inlined. With this patch we interpret byval
arguments as a compact representation of many arguments. The byval argument
setup is implemented in the backend as an inline memcpy, so to model the
cost as accurately as possible we take the number of pointer-sized elements
in the byval argument and give a bonus of 2 instructions for every one of
those. The bonus is capped at 8 elements, which is the number of stores
at which the x86 backend switches from an expanded inline memcpy to a real
memcpy. It would be better to use the real memcpy threshold from the backend,
but it's not available via TargetData.
This change brings the performance of c-ray in line with gcc 4.7. The included
test case tries to reproduce the c-ray problem to catch regressions for this
benchmark early, its performance is dominated by the inline decision of a
specific call.
This only has a small impact on most code, more on x86 and arm than on x86_64
due to the way the ABI works. When building LLVM for x86 it gives a small
inline cost boost to virtually any function using StringRef or STL allocators,
but only a 0.01% increase in overall binary size. The size of gcc compiled by
clang actually shrunk by a couple bytes with this patch applied, but not
significantly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161413 91177308-0d34-0410-b5e6-96231b3b80d8
instsimplify+inline strategy.
The crux of the problem is that instsimplify was reasonably relying on
an invariant that is true within any single function, but is no longer
true mid-inline the way we use it. This invariant is that an argument
pointer != a local (alloca) pointer.
The fix is really light weight though, and allows instsimplify to be
resiliant to these situations: when checking the relation ships to
function arguments, ensure that the argumets come from the same
function. If they come from different functions, then none of these
assumptions hold. All credit to Benjamin Kramer for coming up with this
clever solution to the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161410 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, MBP essentially aligned every branch target it could. This
bloats code quite a bit, especially non-looping code which has no real
reason to prefer aligned branch targets so heavily.
As Andy said in review, it's still a bit odd to do this without a real
cost model, but this at least has much more plausible heuristics.
Fixes PR13265.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161409 91177308-0d34-0410-b5e6-96231b3b80d8
If the result of a common subexpression is used at all uses of the candidate
expression, CSE should not increase the live range of the common subexpression.
rdar://11393714 and rdar://11819721
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161396 91177308-0d34-0410-b5e6-96231b3b80d8
initialize fields of the class that it used.
The result was nonsense code.
Before:
0000000000000000 <foo>:
0: 00441100 0x441100
4: 03e00008 jr ra
8: 00000000 nop
After:
0000000000000000 <foo>:
0: 00041000 sll v0,a0,0x0
4: 03e00008 jr ra
8: 00000000 nop
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161377 91177308-0d34-0410-b5e6-96231b3b80d8
were using a class defined for 32 bit instructions and
thus the instruction was for addiu instead of daddiu.
This was corrected by adding the instruction opcode as a
field in the base class to be filled in by the defs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161359 91177308-0d34-0410-b5e6-96231b3b80d8
These 2 relocations gain access to the
highest and the second highest 16 bits
of a 64 bit object.
R_MIPS_HIGHER %higher(A+S)
The %higher(x) function is [ (((long long) x + 0x80008000LL) >> 32) & 0xffff ].
R_MIPS_HIGHEST %highest(A+S)
The %highest(x) function is [ (((long long) x + 0x800080008000LL) >> 48) & 0xffff ].
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161348 91177308-0d34-0410-b5e6-96231b3b80d8
The MFTB instruction itself is being phased out, and its functionality
is provided by MFSPR. According to the ISA docs, using MFSPR works on all known
chips except for the 601 (which did not have a timebase register anyway)
and the POWER3.
Thanks to Adhemerval Zanella for pointing this out!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161346 91177308-0d34-0410-b5e6-96231b3b80d8
On PPC64, this can be done with a simple TableGen pattern.
To enable this, I've added the (otherwise missing) readcyclecounter
SDNode definition to TargetSelectionDAG.td.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161302 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is mostly just refactoring a bunch of copy-and-pasted code, but
it also adds a check that the call instructions are readnone or readonly.
That check was already present for sin, cos, sqrt, log2, and exp2 calls, but
it was missing for the rest of the builtins being handled in this code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161282 91177308-0d34-0410-b5e6-96231b3b80d8
I noticed that SelectionDAGBuilder::visitCall was missing a check for memcmp
in TargetLibraryInfo, so that it would use custom code for memcmp calls even
with -fno-builtin. I also had to add a new -disable-simplify-libcalls option
to llc so that I could write a test for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161262 91177308-0d34-0410-b5e6-96231b3b80d8
Fast isel doesn't currently have support for translating builtin function
calls to target instructions. For embedded environments where the library
functions are not available, this is a matter of correctness and not
just optimization. Most of this patch is just arranging to make the
TargetLibraryInfo available in fast isel. <rdar://problem/12008746>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161232 91177308-0d34-0410-b5e6-96231b3b80d8
Add more comments and use early returns to reduce nesting in isLoadFoldable.
Also disable folding for V_SET0 to avoid introducing a const pool entry and
a const pool load.
rdar://10554090 and rdar://11873276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161207 91177308-0d34-0410-b5e6-96231b3b80d8
yaml2obj takes a textual description of an object file in YAML format
and outputs the binary equivalent. This greatly simplifies writing
tests that take binary object files as input.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161205 91177308-0d34-0410-b5e6-96231b3b80d8
