When using the MCU psABI, compiler-generated library calls should pass
some parameters in-register. However, since inreg marking for x86 is currently
done by the front end, it will not be applied to backend-generated calls.
This is a workaround for PR3997, which describes a similar issue for -mregparm.
Differential Revision: http://reviews.llvm.org/D13977
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251223 91177308-0d34-0410-b5e6-96231b3b80d8
We don't need a mask of a rotation result to be a constant splat - any constant scalar/vector can be usefully folded.
Followup to D13851.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251197 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for lowering to the XOP VPROT / VPROTI vector bit rotation instructions.
This has required changes to the DAGCombiner rotation pattern matching to support vector types - so far I've only changed it to support splat vectors, but generalising this further is feasible in the future.
Differential Revision: http://reviews.llvm.org/D13851
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251188 91177308-0d34-0410-b5e6-96231b3b80d8
When we fold "mul ((add x, c1), c1)" -> "add ((mul x, c2), c1*c2)", we bail if (add x, c1) has multiple
users which would result in an extra add instruction.
In such cases, this patch adds a check to see if we can eliminate a multiply instruction in exchange for the extra add.
I also added the capability of doing the existing optimization with non-splatted vectors (splatted also works).
Differential Revision: http://reviews.llvm.org/D13740
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251028 91177308-0d34-0410-b5e6-96231b3b80d8
This will be used in future commits for AMDGPU to promote
operations on i64 vectors into operations on 32-bit vector
components.
This will be used / tested in future AMDGPU commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250945 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
TargetLoweringBase::Expand is defined as "Try to expand this to other ops,
otherwise use a libcall." For ISD::UDIV and ISD::SDIV, the choice between
the two possibilities was defined in a rather convoluted way:
- if DIVREM is legal, expand to DIVREM
- if DIVREM has a custom lowering, expand to DIVREM
- if DIVREM libcall is defined and a remainder from the same division is
computed elsewhere, expand to a DIVREM libcall
- else, expand to a DIV libcall
This had the undesirable effect that if both DIV and DIVREM are implemented
as libcalls, then ISD::UDIV and ISD::SDIV are expanded to the heavier DIVREM
libcall, even when the remainder isn't used.
The new code adds a new LegalizeAction, TargetLoweringBase::LibCall, so that
backends can directly control whether they prefer an expansion or a conversion
to a libcall. This makes the generic lowering code even more generic,
allowing its reuse in a wider range of target-specific configurations.
The useful effect is that ARM backend will now generate a call
to __aeabi_{i,u}div rather than __aeabi_{i,u}divmod in cases where
it doesn't need the remainder. There's no functional change outside
the ARM backend.
Reviewers: t.p.northover, rengolin
Subscribers: t.p.northover, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D13862
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250826 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In addition to moving the code over, this patch amends the DIV,REM -> DIVREM
combining to run on all affected nodes at once: if the nodes are converted
to DIVREM one at a time, then the resulting DIVREM may get legalized by the
backend into something target-specific that we won't be able to recognize
and correlate with the remaining nodes.
The motivation is to "prepare terrain" for D13862: when we set DIV and REM
to be legalized to libcalls, instead of the DIVREM, we otherwise lose the
ability to combine them together. To prevent this, we need to take the
DIV,REM -> DIVREM combining out of the lowering stage.
Reviewers: RKSimon, eli.friedman, rengolin
Subscribers: john.brawn, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13733
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250825 91177308-0d34-0410-b5e6-96231b3b80d8
While technically this is untested dead code, it has out-of-tree users.
This reverts a part of r250434.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250717 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Some shared code for handling eh.exceptionpointer and eh.exceptioncode
needs to not share the part that truncates to 32 bits, which is intended
just for exception codes.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13747
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250588 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Caching SDLoc(N), instead of recreating it in every single
function call, keeps the code denser, and allows to unwrap long lines.
Reviewers: sunfish, atrick, sdmitrouk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13726
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250305 91177308-0d34-0410-b5e6-96231b3b80d8
The comment says this was stopped because it was unlikely to be
profitable. This is not true if you want to combine vector loads
with multiple components.
For a simple case that looks like
t0 = load t0 ...
t1 = load t0 ...
t2 = load t0 ...
t3 = load t0 ...
t4 = store t0:1, t0:1
t5 = store t4, t1:0
t6 = store t5, t2:0
t7 = store t6, t3:0
We want to get all of these stores onto a chain
that is a TokenFactor of these N loads. This mostly
solves the AMDGPU merge-stores.ll regressions
with -combiner-alias-analysis for merging vector
stores of vector loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250138 91177308-0d34-0410-b5e6-96231b3b80d8
This basic combine was surprisingly missing.
AMDGPU legalizes many operations in terms of 32-bit vector components,
so not doing this results in many extra copies and subregister extracts
that need to be cleaned up later.
InstCombine already does this for the hasOneUse case. The target hook
is to fix a handful of tests which break (e.g. ARM/vmov.ll) which turn
from a vector materialize repeated immediate instruction to a constant
vector load with more scalar copies from it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250129 91177308-0d34-0410-b5e6-96231b3b80d8
When lowering invoke statement, all unwind destinations are directly added as successors of call site block, and the weight of those new edges are not assigned properly. Actually, default weight 16 are used for those edges. This patch calculates the proper edge weights for those edges when collecting all unwind destinations.
Differential revision: http://reviews.llvm.org/D13354
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250119 91177308-0d34-0410-b5e6-96231b3b80d8
We have a number of functions that implement constant folding of vectors (unary and binary ops) in near identical manners (and the differences don't appear to be critical).
This patch introduces a common implementation (SelectionDAG::FoldConstantVectorArithmetic) and calls this in both the unary and binary op cases.
After this initial patch I intend to begin enabling vector constant folding for a wider number of opcodes in SelectionDAG::getNode().
Differential Revision: http://reviews.llvm.org/D13665
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250118 91177308-0d34-0410-b5e6-96231b3b80d8
This was a minor bug in r249492. Calling PrepareEHLandingPad on a
non-landingpad was a no-op, but it attempted to get the generic pointer
register class, which apparently doesn't exist for some targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250068 91177308-0d34-0410-b5e6-96231b3b80d8
On targets where f32 is not legal, we have to look through a BITCAST SDNode to
find the register that an argument is stored in when emitting debug info, or we
will not be able to emit a DW_AT_location for it.
Differential Revision: http://reviews.llvm.org/D13005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250056 91177308-0d34-0410-b5e6-96231b3b80d8
Enable constant folding for vector splats as well as scalars.
Enable constant canonicalization for all scalar and vector constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249978 91177308-0d34-0410-b5e6-96231b3b80d8
The new implementation works at least as well as the old implementation
did.
Also delete the associated preparation tests. They don't exercise
interesting corner cases of the new implementation. All the codegen
tests of the EH tables have already been ported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249918 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Set the pad MBB as a funclet entry for CoreCLR as well as MSVCCXX, and
update state numbering to put the catchpad block rather than its normal
successor into the unwind map.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13492
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249569 91177308-0d34-0410-b5e6-96231b3b80d8
Our current emission strategy is to emit the funclet prologue in the
CatchPad's normal destination. This is problematic because
intra-funclet control flow to the normal destination is not erroneous
and results in us reevaluating the prologue if said control flow is
taken.
Instead, use the CatchPad's location for the funclet prologue. This
correctly models our desire to have unwind edges evaluate the prologue
but edges to the normal destination result in typical control flow.
Differential Revision: http://reviews.llvm.org/D13424
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249483 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Assign one state number per handler/funclet, tracking parent state,
handler type, and catch type token.
State numbers are arranged such that ancestors have lower state numbers
than their descendants.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, AndyAyers, llvm-commits
Differential Revision: http://reviews.llvm.org/D13450
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249457 91177308-0d34-0410-b5e6-96231b3b80d8
visitSIGN_EXTEND_INREG calls SelectionDAG::getNode to constant fold scalar constants but handles vector constants itself, despite getNode being capable of dealing with them.
This required a minor change to the getNode implementation to actually deal with cases where the scalars of a BUILD_VECTOR were wider integers than the vector type - which was the only extra ability of the visitSIGN_EXTEND_INREG implementation.
No codegen intended and all existing tests remain the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249236 91177308-0d34-0410-b5e6-96231b3b80d8
Catchret transfers control from a catch funclet to an earlier funclet.
However, it is not completely clear which funclet the catchret target is
part of. Make this clear by stapling the catchret target's funclet
membership onto the CATCHRET SDAG node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249052 91177308-0d34-0410-b5e6-96231b3b80d8
The Win64 unwinder disassembles forwards from each PC to try to
determine if this PC is in an epilogue. If so, it skips calling the EH
personality function for that frame. Typically, this means you cannot
catch an exception in the same frame that you threw it, because 'throw'
calls a noreturn runtime function.
Previously we avoided this problem with the TrapUnreachable
TargetOption, but that's a much bigger hammer than we need. All we need
is a 1 byte non-epilogue instruction right after the call. Instead,
what we got was an unconditional branch to a shared block containing the
ud2, potentially 7 bytes instead of 1. So, this reverts r206684, which
added TrapUnreachable, and replaces it with something better.
The new code pattern matches for invoke/call followed by unreachable and
inserts an int3 into the DAG. To be 100% watertight, we would need to
insert SEH_Epilogue instructions into all basic blocks ending in a call
with no terminators or successors, but in practice this is unlikely to
come up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248959 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Funclets have been turned into functions by the time they hit the object
file. Make sure that they have decent names for the symbol table and
CFI directives explaining how to reason about their prologues.
Differential Revision: http://reviews.llvm.org/D13261
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248824 91177308-0d34-0410-b5e6-96231b3b80d8
