Although it seems like clang will never emit scattered relocations in
the debug information (at least I couldn't find a way), we have too
support them for the benefit of other compilers.
As clang doesn't generate them, the included testcase was produced
from hacked up assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259339 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-dsymutil was misinterpreting the value of common symbols as their
address when it actually contains their size. This didn't impact
llvm-dsymutil's ability to link the debug information for common symbols
because these are always found by name and not by address. Things could
however go wrong when the size of a common object matched the object
file address of another symbol. Depending on the link order of the symbols
the common object might incorrectly evict this other object from the
address to symbol mapping, and then link the evicted symbol with a wrong
binary address.
Use the new ability to have symbols without an object file address to fix
this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259318 91177308-0d34-0410-b5e6-96231b3b80d8
This change just changes the data structure that ties symbol names,
object file address and linked binary addresses to accept mappings
with no object file address. Such symbol mappings are not fed into
the debug map yet, so this patch is NFC.
A subsequent patch will make use of this functionality for common
symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259317 91177308-0d34-0410-b5e6-96231b3b80d8
These sets perform linear searching in small mode so it is never a good
idea to use SmallSize/N bigger than 32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259283 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables llvm-bcanalyzer to print the bitcode wrapper header
if the file has one, which is needed to test the changes made in
r258627 (bitcode-wrapper-header-armv7m.ll is the test case for r258627).
Differential Revision: http://reviews.llvm.org/D16642
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259162 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259126 91177308-0d34-0410-b5e6-96231b3b80d8
Prior to r259115 this was coming via LTOModule.h and MCContext.h.
Apparently this target is not built by 'check'. =(
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259124 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259117 91177308-0d34-0410-b5e6-96231b3b80d8
We already perform it at the beginning of the function so we can't
arrive here with an invalid object. Also, add a test so that bugs
won't sneak in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258982 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258861 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-objdump when printing the Mach Header to print the unknown
cputype and cpusubtype fields as decimal instead of not printing
them at all. And change the test to check for that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258826 91177308-0d34-0410-b5e6-96231b3b80d8
Originally this change was causing failures on windows buildbots.
But those problems were fixed in r258806.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258811 91177308-0d34-0410-b5e6-96231b3b80d8
This patch was originally committed as r257885, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258683 91177308-0d34-0410-b5e6-96231b3b80d8
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "bad string index" for bad string indexes. Updated the error message
in the llvm-objdump test, and added tests to show llvm-nm prints
"bad string index" and a test to print the actual bad string index value
which in this case is 0xfe000002 when printing the fields as raw hex.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258520 91177308-0d34-0410-b5e6-96231b3b80d8
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "(?,?)" or just "s" for bad section indexes. Also added a test to show
it prints the bad section index of "42" when printing the fields as raw hex.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258434 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the necessary plumbing to cmake to build the sources related to
GlobalISel.
To build the sources related to GlobalISel, we need to add -DBUILD_GLOBAL_ISEL=ON.
By default, this is OFF, thus GlobalISel sources will not impact people that do
not explicitly opt-in.
Differential Revision: http://reviews.llvm.org/D15983
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258344 91177308-0d34-0410-b5e6-96231b3b80d8
Some architecture specific ELF section flags might have the same value
(for example SHF_X86_64_LARGE and SHF_HEX_GPREL) and we have to check
machine architectures to select an appropriate set of possible flags.
The patch selects architecture specific flags into separate arrays
`ElfxxxSectionFlags` and combines `ElfSectionFlags` and `ElfxxxSectionFlags`
before pass to the `StreamWriter::printFlags()` method.
Differential Revision: http://reviews.llvm.org/D16269
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258334 91177308-0d34-0410-b5e6-96231b3b80d8
This addresses PR26060 where function lto_module_create() could return nullptr
but lto_get_error_message() returned an empty string.
The error() call after LTOModule::createFromFile() in llvm-lto is then removed
because any error from this function should go through the diagnostic handler in
llvm-lto which will exit the program. The error() call was added because this
previously did not happen when the file was non-existent. This is fixed by the
patch. (The situation that llvm-lto reports an error when the input file does
not exist is tested by llvm/tools/llvm-lto/error.ll).
Differential Revision: http://reviews.llvm.org/D16106
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258298 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a re-commit of r257003, which was reverted,
along with the fixes from http://reviews.llvm.org/D15986.
r252532 added support for reporting the monolithic library
when LLVM_BUILD_LLVM_DYLIB is used. This would only be done
if the individual components were not found, and the dynamic
library is found.
This diff extends this as follows:
- If LLVM_LINK_LLVM_DYLIB is set, then prefer the shared
library, even if all component libraries exist.
- Two flags, --link-shared and --link-static are introduced
to provide explicit guidance. If --link-shared is passed
and the shared library does not exist, an error results.
Additionally, changed the expected shared library names from
(e.g.) LLVM-3.8.0 to LLVM-3.8. The former exists only in an
installation (and then only in CMake builds I think?), and not
in the build tree; this breaks usage of llvm-config during
builds, e.g. by llvm-go.
Reviewers: DiamondLovesYou, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15986
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258283 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently llvm::SplitModule as the first step globalizes all local objects, which might not be desirable in some scenarios.
This change adds a new flag to llvm::SplitModule that uses SCC approach to search for a balanced partition without the need to externalize symbols.
Such partition might not be possible or fully balanced for a given number of partitions, and is a function of the module properties (global/local dependencies within the module).
Joint development Tobias Edler von Koch (tobias@codeaurora.org) and Sergei Larin (slarin@codeaurora.org)
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D16124
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258083 91177308-0d34-0410-b5e6-96231b3b80d8
Follow up to r258001. These template functions might return both REL and RELA
relocations. The 'rel' noun looks less ambiguous.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258060 91177308-0d34-0410-b5e6-96231b3b80d8
Entry block count was not counted and is corrected. Also
introduce a new metric that is MaxInternalBlockCount which
show command shows (as before).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257987 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r257751, bringing back r256105.
The problem the assert found was fixed in r257915.
Original commit message:
Assert that we have all use/users in the getters.
An error that is pretty easy to make is to use the lazy bitcode reader
and then do something like
if (V.use_empty())
The problem is that uses in unmaterialized functions are not accounted
for.
This patch adds asserts that all uses are known.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257920 91177308-0d34-0410-b5e6-96231b3b80d8
# The first commit's message is:
Revert "[ARM] Add DSP build attribute and extension targeting"
This reverts commit b11cc50c0b.
# This is the 2nd commit message:
Revert "[ARM] Add new system registers to ARMv8-M Baseline/Mainline"
This reverts commit 837d08454e.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257916 91177308-0d34-0410-b5e6-96231b3b80d8
Added forgotten ELFDumper.cpp to commit.
Initial commit message:
[llvm-readobj] Add support for TLSDESC_PLT and TLSDESC_GOT dynamic section tags to the llvm-readobj.
If module uses uses lazy TLSDESC relocations it should define DT_TLSDESC_PLT and DT_TLSDESC_GOT entries.
They were unknown for llvm-readobj before this patch.
Differential revision: http://reviews.llvm.org/D16224
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257914 91177308-0d34-0410-b5e6-96231b3b80d8
classes.
OrcRemoteTargetClient::RCMemoryManager will now register EH frames with the
server automatically. This allows remote-execution of code that uses exceptions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257816 91177308-0d34-0410-b5e6-96231b3b80d8
These fields are almost always zero. However, there are relocations
against them, and we should print the relocation symbol with it as
SYM+0xNN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257776 91177308-0d34-0410-b5e6-96231b3b80d8
Binary annotations are encoded along the lines of UTF-8 and ECI but with
a few minor differences.
The algorithm specified in "ECMA-335 CLI Section II.3.2 - Blobs and
Signatures" is used to compress binary annotations. Signed binary
annotations are encoded like unsigned annotations except the sign bit is
rotated left to reduce the number of bits needed to be encoded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257742 91177308-0d34-0410-b5e6-96231b3b80d8
Moves some .def files into include/DebugInfo/CodeView.
Aslo remove a 'using namespace' directive from a header in readobj and
update the uses of the endian helper types to compensate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257712 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a detailed profile summary in llvm-profdata. The summary is in the
form of one or more triples of the form (P, N, M) which is interpreted as if
we look at the Top-N counts in the profile, their sum accounts for P percentage
of the sum of all counts in the program and the minimum count in the Top-N is M.
Differential Revision: http://reviews.llvm.org/D16005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257680 91177308-0d34-0410-b5e6-96231b3b80d8
This rewrites and expands the existing codeview dumping functionality in
llvm-readobj using techniques similar to those in lib/Object. This defines a
number of new records and enums useful for reading memory mapped codeview
sections in COFF objects.
The dumper is intended as a testing tool for LLVM as it grows more codeview
output capabilities.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D16104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257658 91177308-0d34-0410-b5e6-96231b3b80d8
When we arrive at the end of the function, the validation of
the object has been done already. In theory, so, we should never
arrive here with something broken as the object isn't mutated.
Practice sometimes proves theory to be wrong, so leave an assertion
instead, as suggested by David Blaikie, to catch bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257570 91177308-0d34-0410-b5e6-96231b3b80d8
This change has us print out fields we didn't previously understand. To
improve readability, we now group column information with it's
respective line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257552 91177308-0d34-0410-b5e6-96231b3b80d8
to only print the first private header.
Which for Mach-O files only prints the Mach header and not the subsequent load
commands. Which is used by scripts to match what the darwin otool(1) with the
-h flag does without the -l flag.
For non-Mach-O files it has the same functionality as -private-headers (with
the trailing ’s’).
rdar://24158331
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257548 91177308-0d34-0410-b5e6-96231b3b80d8
A request has been made to the official registry, but an official value is
not yet available. This patch uses a temporary value in order to support
development. When an official value is recieved, the value of EM_WEBASSEMBLY
will be updated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257517 91177308-0d34-0410-b5e6-96231b3b80d8
This revision breaks llvm-config if you set
BUILD_SHARED_LIBS=on in a CMake build. Backing
out until the fix is ready to land.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257457 91177308-0d34-0410-b5e6-96231b3b80d8
The new ORC remote-JITing support provides a superset of the old code's
functionality, so we can replace the old stuff. As a bonus, a couple of
previously XFAILed tests have started passing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257343 91177308-0d34-0410-b5e6-96231b3b80d8
Previously the CompileOnDemand layer was hard-coded to use a new
SectionMemoryManager for each function when it was called.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257265 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
r252532 added support for reporting the monolithic library
when LLVM_BUILD_LLVM_DYLIB is used. This would only be done
if the individual components were not found, and the dynamic
library is found.
This diff extends this as follows:
- If LLVM_LINK_LLVM_DYLIB is set, then prefer the shared
library, even if all component libraries exist.
- Two flags, --link-shared and --link-static are introduced
to provide explicit guidance. If --link-shared is passed
and the shared library does not exist, an error results.
Additionally, changed the expected shared library names from
(e.g.) LLVM-3.8.0 to LLVM-3.8. The former exists only in an
installation (and then only in CMake builds I think?), and not
in the build tree; this breaks usage of llvm-config during
builds, e.g. by llvm-go.
Reviewers: DiamondLovesYou, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15033
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257003 91177308-0d34-0410-b5e6-96231b3b80d8
This replicates the logic of Darwin dwarfdump for manually opening up
.dSYM bundles without introducing any new dependencies.
<rdar://problem/20491670>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256350 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that his is *really* slow. With this change the link of
clang with plugin-opt=emit-llvm goes from 41 to 26 seconds.
We can add an option to enable it again if needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256302 91177308-0d34-0410-b5e6-96231b3b80d8
Today, we always take into account the possibility that object files
produced by MC may be consumed by an incremental linker. This results
in us initialing fields which vary with time (TimeDateStamp) which harms
hermetic builds (e.g. verifying a self-host went well) and produces
sub-optimal code because we cannot assume anything about the relative
position of functions within a section (call sites can get redirected
through incremental linker thunks).
Let's provide an MCTargetOption which controls this behavior so that we
can disable this functionality if we know a-priori that the build will
not rely on /incremental.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256203 91177308-0d34-0410-b5e6-96231b3b80d8
With the support of value profiling added, the Indexed prof
reader gets less efficient. The prof reader initialization
used to be just reading the file header, but with VP support
added, initialization needs to walk through all profile keys
of ondisk hash table resulting in very poor locality and large
memory increase (keys are stored together with the profile data
in the mapped profile buffer). Even worse, when the reader is
used by the compiler (not llvm-profdata too), the penalty becomes
very high as compilation of each single module requires touching
profile data buffer for the whole program.
In this patch, the icall target values (MD5hash) are no longer eargerly
converted back to name strings when the data is read into memory. New
interface is added to to profile reader so that InstrProfSymtab can be
lazily created for Indexed profile reader on-demand. Creating of the
symtab is intended to be used by llvm-profdata tool for symbolic dumping
of VP data. It can be used with compiler (for legacy out of tree uses)
too but not recommended due to compile time and memory reasons
mentioned above.
Some other cleanups are also included: Function Addr to md5 map is now
consolated into InstrProfSymtab. InstrProfStringtab is no longer used and
eliminated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256114 91177308-0d34-0410-b5e6-96231b3b80d8
An error that is pretty easy to make is to use the lazy bitcode reader
and then do something like
if (V.use_empty())
The problem is that uses in unmaterialized functions are not accounted
for.
This patch adds asserts that all uses are known.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256105 91177308-0d34-0410-b5e6-96231b3b80d8
This deprecates:
* LLVMParseBitcode
* LLVMParseBitcodeInContext
* LLVMGetBitcodeModuleInContext
* LLVMGetBitcodeModule
They are replaced with the functions with a 2 suffix which do not record
a diagnostic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256065 91177308-0d34-0410-b5e6-96231b3b80d8
This inlines materializeAll into the only caller
(materializeAllPermanently) and renames materializeAllPermanently to
just materializeAll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256024 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM MC has single methods which can handle the output of EH frame and DWARF CIE's and FDE's.
This code improves DWARFDebugFrame::parse to do the same for parsing.
This also allows llvm-objdump to support the --dwarf=frames option which objdump supports. This
option dumps the .eh_frame section using the new code in DWARFDebugFrame::parse.
http://reviews.llvm.org/D15535
Reviewed by Rafael Espindola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256008 91177308-0d34-0410-b5e6-96231b3b80d8
Type specific declarations have been moved to Type.h and error handling
routines have been moved to ErrorHandling.h. Both are included in Core.h
so nothing should change for projects directly including the headers,
but transitive dependencies may be affected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255965 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Second patch split out from http://reviews.llvm.org/D14752.
Maps metadata as a post-pass from each module when importing complete,
suturing up final metadata to the temporary metadata left on the
imported instructions.
This entails saving the mapping from bitcode value id to temporary
metadata in the importing pass, and from bitcode value id to final
metadata during the metadata linking postpass.
Depends on D14825.
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14838
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255909 91177308-0d34-0410-b5e6-96231b3b80d8
Passing in a std::unique_ptr should help find errors when the module
is used after being linked into another module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255842 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Surface counter overflow when merging profile data. Merging still occurs on overflow but counts saturate to the maximum representable value. Overflow is reported to the user.
Reviewers: davidxl, dnovillo, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255825 91177308-0d34-0410-b5e6-96231b3b80d8
Bootstrapping clang to generate PGO data (patches coming soon), requires llvm-profdata targets to be generated before clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255794 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change adds support for specifying a weight when merging profile data with the llvm-profdata tool.
Weights are specified by using the --weighted-input=<weight>,<filename> option. Input files not specified
with this option (normal positional list after options) are given a default weight of 1.
Adding support for arbitrary weighting of input profile data allows for relative importance to be placed on the
input data from multiple training runs.
Both sampled and instrumented profiles are supported.
Reviewers: davidxl, dnovillo, bogner, silvas
Subscribers: silvas, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D15306
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255659 91177308-0d34-0410-b5e6-96231b3b80d8
The symbol being printed in this field comes from the main symbol table,
not 0xF1 subsection. Use LinkageName to make that a lot clearer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255596 91177308-0d34-0410-b5e6-96231b3b80d8
This patch converts code that has access to a LLVMContext to not take a
diagnostic handler.
This has a few advantages
* It is easier to use a consistent diagnostic handler in a single program.
* Less clutter since we are not passing a handler around.
It does make it a bit awkward to implement some C APIs that return a
diagnostic string. I will propose new versions of these APIs and
deprecate the current ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255571 91177308-0d34-0410-b5e6-96231b3b80d8
This code adds some simple decoding of the FDE's in an eh_frame.
There's still more to be done in terms of error handling and verification.
Also, we need to be able to decode the CFI's.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255550 91177308-0d34-0410-b5e6-96231b3b80d8
This is the start of work to dump the contents of the eh_frame section.
It currently emits CIE entries. FDE entries will come later.
It also needs improved error checking which will follow soon.
http://reviews.llvm.org/D15502
Reviewed by Kevin Enderby and Lang Hames.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255546 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that terminatepad gives little benefit over a cleanuppad
which calls the termination function. This is not sufficient to
implement fully generic filters but MSVC doesn't support them which
makes terminatepad a little over-designed.
Depends on D15478.
Differential Revision: http://reviews.llvm.org/D15479
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255522 91177308-0d34-0410-b5e6-96231b3b80d8
It's O(N^2) because it does a simple walk through the existing types to
find duplicates, but that will be fixed in a follow-up commit to use a
mapping data structure of some kind.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255482 91177308-0d34-0410-b5e6-96231b3b80d8
While we have successfully implemented a funclet-oriented EH scheme on
top of LLVM IR, our scheme has some notable deficiencies:
- catchendpad and cleanupendpad are necessary in the current design
but they are difficult to explain to others, even to seasoned LLVM
experts.
- catchendpad and cleanupendpad are optimization barriers. They cannot
be split and force all potentially throwing call-sites to be invokes.
This has a noticable effect on the quality of our code generation.
- catchpad, while similar in some aspects to invoke, is fairly awkward.
It is unsplittable, starts a funclet, and has control flow to other
funclets.
- The nesting relationship between funclets is currently a property of
control flow edges. Because of this, we are forced to carefully
analyze the flow graph to see if there might potentially exist illegal
nesting among funclets. While we have logic to clone funclets when
they are illegally nested, it would be nicer if we had a
representation which forbade them upfront.
Let's clean this up a bit by doing the following:
- Instead, make catchpad more like cleanuppad and landingpad: no control
flow, just a bunch of simple operands; catchpad would be splittable.
- Introduce catchswitch, a control flow instruction designed to model
the constraints of funclet oriented EH.
- Make funclet scoping explicit by having funclet instructions consume
the token produced by the funclet which contains them.
- Remove catchendpad and cleanupendpad. Their presence can be inferred
implicitly using coloring information.
N.B. The state numbering code for the CLR has been updated but the
veracity of it's output cannot be spoken for. An expert should take a
look to make sure the results are reasonable.
Reviewers: rnk, JosephTremoulet, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D15139
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255422 91177308-0d34-0410-b5e6-96231b3b80d8
Quoting from the comment added to the code:
// Objective-C on i386 uses artificial absolute symbols to
// perform some link time checks. Those symbols have a fixed 0
// address that might conflict with real symbols in the object
// file. As I cannot see a way for absolute symbols to find
// their way into the debug information, let's just ignore those.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255350 91177308-0d34-0410-b5e6-96231b3b80d8
Ensure we release the files even when they don't hold a function index
summary section, by restructuring the control flow a little bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255256 91177308-0d34-0410-b5e6-96231b3b80d8
A linker normally has two stages: symbol resolution and "moving stuff".
In lib/Linker there is the complication of lazy linking some globals,
but it was still far more mixed than it needed to.
This splits the linker into a lower level IRMover and the linker proper.
The IRMover just takes a list of globals to move and a callback that
lets the user control what is lazy linked.
The main motivation is that now tools/gold (and soon lld) can use their
own symbol resolution to instruct IRMover what to do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255254 91177308-0d34-0410-b5e6-96231b3b80d8
This wasn't causing an issue since at HEAD we exit the linker completely
after creating the combined index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255156 91177308-0d34-0410-b5e6-96231b3b80d8
This is a preliminary change towards deduplicating type units based on
their signatures. Next change will skip emission of types when their
signature has already been seen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255154 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The order of destructors in LTOCodeGenerator gets changed in r254696.
It is possible for LTOCodeGenerator to have a MergedModule created in
the OwnedContext, in which case the module must be destructed before
the context.
Reviewers: rafael, dexonsmith
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D15346
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255092 91177308-0d34-0410-b5e6-96231b3b80d8
Cloning the module was supposed to guard against the possibility
that the passes may be non-idempotent. However, for some reason
I decided to put that AFTER the passes had already run on the
module, defeating the point entirely. Fix that by moving up the
CloneModule as is done in llc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254819 91177308-0d34-0410-b5e6-96231b3b80d8
`Out` can be null if no output is requested, so move any access
to it inside the conditional. Thanks to Justin Bogner for finding
this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254804 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch the diagnostic handler was optional. If it was not
passed, the one in the LLVMContext was used.
That is probably not a pattern we want to follow. If each area has an
optional callback, there is a sea of callbacks and it is hard to follow
which one is called.
Doing this also found cases where the callback is a nice addition, like
testing that no errors or warnings are reported.
The other option is to always use the diagnostic handler in the
LLVMContext. That has a few problems
* To implement the C API we would have to set the diag handler and then
set it back to the original value.
* Code that creates the context might be far away from code that wants
the diagnostics.
I do have a patch that implements the second option and will send that as
an RFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254777 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Lately, I have submitted a number of patches to fix bugs that
only occurred when using the same pass manager to compile multiple
modules (generally these bugs are failure to reset some persistent
state). Unfortunately I don't think there is currently a way to test
that from the command line. This adds a very simple flag to both llc
and opt, under which the tools will simply re-run their respective
pass pipelines using the same pass manager on (a clone of the same
module). Additionally, we verify that both outputs are bitwise the
same.
Reviewers: yaron.keren
Subscribers: loladiro, yaron.keren, kcc, llvm-commits
Differential Revision: http://reviews.llvm.org/D14965
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254774 91177308-0d34-0410-b5e6-96231b3b80d8
This probably shouldn't be generated in the .dwo file for CUs, only for
TUs, but it's in the sample .dwos (generated by clang) so dwp should
reflect that.
Arguably the DWP tool could be smart enough to know that the CUs
shouldn't need a debug_line.dwo section and skip that even when it's
legitimately generated for TUs, but that's a bit more off-book.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254767 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: The command prints out list of functions that were not entered.
To do this, addresses are first converted to function locations. Set
operations are used for function locations.
Differential Revision: http://reviews.llvm.org/D14889
review
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254742 91177308-0d34-0410-b5e6-96231b3b80d8
This is a continuation of r253367.
These functions return is owned by the caller, so they return
std::unique_ptr now.
The call can fail, so the return is wrapped in ErrorOr.
They have a context where to report diagnostics, so they don't need to
take a string out parameter.
With this there are no call to getGlobalContext in lib/LTO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254721 91177308-0d34-0410-b5e6-96231b3b80d8
This class is turning into a useful interface, rather than an implementation
detail, so I'm dropping the 'Base' suffix.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254693 91177308-0d34-0410-b5e6-96231b3b80d8
This change adds support for an optional weight when merging profile data with the llvm-profdata tool.
Weights are specified by adding an option ':<weight>' suffix to the input file names.
Adding support for arbitrary weighting of input profile data allows for relative importance to be placed on the
input data from multiple training runs.
Both sampled and instrumented profiles are supported.
Reviewers: dnovillo, bogner, davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254669 91177308-0d34-0410-b5e6-96231b3b80d8
There is no real reason the index has to have the concept of an
exporting Module. We should be able to have one single unique
instance of the Index, and it should be read-only after creation
for the whole ThinLTO processing.
The linker plugin should be able to process multiple modules (in
parallel or in sequence) with the same index.
The only reason the ExportingModule was present seems to be to
implement hasExportedFunctions() that is used by the Module linker
to decide what to do with the current Module.
For now I replaced it with a query to the map of Modules path to
see if this module was declared in the Index and consider that if
it is the case then it is probably exporting function.
On the long term the Linker interface needs to evolve and this
call should not be needed anymore.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254581 91177308-0d34-0410-b5e6-96231b3b80d8
This is very rudimentary support for debug_cu_index, but it is enough to
allow llvm-dwarfdump to find the offsets for contributions and
correctly dump debug_info.
It will need to actually find the real signature of the unit and build
the real hash table with the right number of buckets, as per the DWP
specification.
It will also need to be expanded to cover the tu_index as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254489 91177308-0d34-0410-b5e6-96231b3b80d8
The linker never takes ownership of a module or changes which module it
is refering to, making it natural to use references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254449 91177308-0d34-0410-b5e6-96231b3b80d8
Also, ensure that references to those strings in debug_str_offsets.dwo
correctly refer to the deduplicated strings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254441 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't deduplicate strings in the debug_str section, nor does it
properly wire up the index so that debug_info can /find/ these strings,
but it does correct the str_offsets specifically.
Follow up patches to address those related/next issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254431 91177308-0d34-0410-b5e6-96231b3b80d8
This just concatenates the common DWP sections without doing any of the
fancy DWP things like:
1) update str_offsets
2) deduplicating strings
3) merging/creating cu/tu_index
Patches for these will follow shortly.
(also not sure about target triple/object file type for this tool - do I
really need a whole triple just to write an object file that contains
purely static/hardcoded bytes in each section? & I guess I should just
pick it based on the first input, maybe, rather than hardcoding for now
- but we only produce .dwo on ELF platforms with objcopy for now anyway)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254355 91177308-0d34-0410-b5e6-96231b3b80d8
Now the ValueMapper has two callbacks. The first one maps the
declaration. The ValueMapper records the mapping and then materializes
the body/initializer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254209 91177308-0d34-0410-b5e6-96231b3b80d8
GlobalAliases may reference function definitions, but not function declarations.
bugpoint would sometimes create invalid IR by deleting a function's body (thus
mutating a function definition into a declaration) without first 'fixing' any
GlobalAliases that reference that function definition.
This change iteratively prevents that issue. Before deleting a function's body,
it scans the module for GlobalAliases which reference that function. When
found, it eliminates them using replaceAllUsesWith.
Fixes PR20788.
Patch by Nick Johnson!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254171 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This could happen if `GetComponentNames` is true, because `Name` from
`VisitComponent` would reference a stack instance of `std::string` in
`ComputeLibsForComponents`.
Reviewers: beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14913
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254108 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
For relocation types that are known to not require stub functions, there
is no need to allocate extra space for the stub functions.
Reviewers: lhames, reames, maksfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253920 91177308-0d34-0410-b5e6-96231b3b80d8
The new option is similar to the SampleProfile dump option.
- dump raw/indexed format into text profile format
- merge the profile and output into text profile format.
Note that Value Profiling data text format is not yet designed.
That functionality will be added later.
Differential Revision: http://reviews.llvm.org/D14894
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253913 91177308-0d34-0410-b5e6-96231b3b80d8
Add a shared helper routine to read the function index from a file
and create/return the function index object. Use it in llvm-link and
llvm-lto.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253903 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Several fixes to the handling of bitcode files without function summary
sections so that they are skipped during ThinLTO processing in llvm-lto
and the gold plugin when appropriate instead of aborting.
1 Don't assert when trying to add a FunctionInfo that doesn't have
a summary attached.
2 Skip FunctionInfo structures that don't have attached function summary
sections when trying to create the combined function summary.
3 In both llvm-lto and gold-plugin, check whether a bitcode file has
a function summary section before trying to parse the index, and skip
the bitcode file if it does not.
4 Fix hasFunctionSummaryInMemBuffer in BitcodeReader, which had a bug
where we returned to early while looking for the summary section.
Also added llvm-lto and gold-plugin based tests for cases where we
don't have function summaries in the bitcode file. I verified that
either the first couple fixes described above are enough to avoid the
crashes, or fixes 1,3,4. But have combined them all here for added
robustness.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14903
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253796 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add a -preserve-modules option to llvm-link that simulates LTO
clients that don't destroy modules as they are linked. This enables
reproduction of a recent bug introduced by a metadata linking change
that was only caught when the modules weren't destroyed before
writing bitcode (LTO on Windows).
See http://llvm.org/viewvc/llvm-project?view=revision&revision=253170
for more details on the original bug and the fix.
Confirmed the new test added here reproduces the failure using the new
option when I suppress the fix.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14818
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253740 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is split out from the ThinLTO metadata mapping patch
http://reviews.llvm.org/D14752.
To avoid needing to parse the module level metadata during function
importing, a new module-level record is added which holds the
number of module-level metadata values. This is required because
metadata value ids are assigned implicitly during parsing, and the
function-level metadata ids start after the module-level metadata ids.
I made a change to this version of the code compared to D14752
in order to add more consistent and thorough assertion checking of the
new record value. We now unconditionally use the record value to
initialize the MDValueList size, and handle it the same in parseMetadata
for all module level metadata cases (lazy loading or not).
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D14825
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253668 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces two new options:
- "llvm-lto -save-merged-module -o outfile" dumps the LTO Module to
outfile.merged.bc prior to CodeGen and after LTO optimizations have been run.
- "llvm-lto -filetype=asm -o outfile" makes llvm-lto emit assembly instead of
object code in outfile.
Both are intended for use in lit tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253624 91177308-0d34-0410-b5e6-96231b3b80d8
Missed bit of feedback from D14720.
Use SmallSet<std::error_code> rather than std::set<...> in order to be more efficient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253474 91177308-0d34-0410-b5e6-96231b3b80d8
Most linked executables do not have a symbol table in COFF.
However, it is pretty typical to have some export entries. Use those
entries to inform the disassembler about potential function definitions
and call targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253429 91177308-0d34-0410-b5e6-96231b3b80d8
While still allowing CodeGen/AsmPrinter in llvm to own them using a bump
ptr allocator. (might be nice to replace the pointers there with
something that at least automatically calls their dtors, if that's
necessary/useful, rather than having it done explicitly (I think a typed
BumpPtrAllocator already does this, or maybe a unique_ptr with a custom
deleter, etc))
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253409 91177308-0d34-0410-b5e6-96231b3b80d8
Missed bit of feedback from D14720.
Show the same "Make sure that all profile
data to be merged is generated from the same binary." hint for hash mismatch
and value site count mismatch as we now do for counter mismatch when merging
incompatible instrumentation profile data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253400 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change tries to make the root cause of instrumented profile data merge failures clearer.
Previous:
$ llvm-profdata merge test_0.profraw test_1.profraw -o test_merged.profdata
test_1.profraw: foo: Function count mismatch
test_1.profraw: bar: Function count mismatch
test_1.profraw: baz: Function count mismatch
...
Changed:
$ llvm-profdata merge test_0.profraw test_1.profraw -o test_merged.profdata
test_1.profraw: foo: Function basic block count change detected (counter mismatch)
Make sure that all profile data to be merged is generated from the same binary.
test_1.profraw: bar: Function basic block count change detected (counter mismatch)
test_1.profraw: baz: Function basic block count change detected (counter mismatch)
...
Reviewers: dnovillo, davidxl, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14739
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253384 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes the std::string& argument from a number of C++ LTO API calls
and instead makes them use the installed diagnostic handler. This would also
improve consistency of diagnostic handling infrastructure: if an LTO client used
lto_codegen_set_diagnostic_handler() to install a custom error handler, we do
not want some error messages to go through the custom error handler, and some
other error messages to go into sLastErrorString.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253367 91177308-0d34-0410-b5e6-96231b3b80d8
Now that setExecutable() changed to do all the ground work to make
memory executable on the host, we can remove all (redundant) calls
to invalidate instruction cache here.
As an added bonus, this makes invalidateInstructionCache() dead
code, so it can be removed.
Differential Revision: http://reviews.llvm.org/D13631
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253343 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There are currently two blocks with the METADATA_BLOCK id at module
scope. The first has the module-level metadata values (consisting of
some combination of METADATA_* record codes except for METADATA_KIND).
The second consists only of METADATA_KIND records. The latter is used
only in the METADATA_ATTACHMENT block within function blocks (for
metadata attached to instructions).
For ThinLTO we want to delay the parsing of module level metadata
until all functions have been imported from that module (there is some
bookkeeping used to suture it up when we read it during a post-pass).
However, we do need the METADATA_KIND records when parsing the function
body during importing, since those kinds are used as described above.
To simplify identification and parsing of just the block containing
the metadata kinds, use a different block id (METADATA_KIND_BLOCK_ID).
Support older bitcode without the new block id as well.
Reviewers: dexonsmith, joker.eph
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14654
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253154 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change addresses two possible instances of user error / confusion when
merging sampled profile data.
Previously any input that didn't match the raw or processed instrumented format
would automatically be interpreted as instrumented profile text format data.
No error would be reported during the merge.
Example:
If foo-sampled.profdata and bar-sampled.profdata are binary sampled profiles:
Old behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -output foobar-sampled.profdata
$ llvm-profdata show -sample foobar-sampled.profdata
error: foobar-sampled.profdata:1: Expected 'mangled_name:NUM:NUM', found lprofi
This change adds basic checks for valid input data when assuming text input.
It also makes error messages related to file format validity more specific about
the assumbed profile data type.
New behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -o foobar-sampled.profdata
error: foo.profdata: Unrecognized instrumentation profile encoding format
Perhaps you forgot to use the -sample option?
Reviewers: bogner, davidxl, dnovillo
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14558
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253009 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change addresses two possible instances of user error / confusion when
merging sampled profile data.
Previously any input that didn't match the raw or processed instrumented format
would automatically be interpreted as instrumented profile text format data.
No error would be reported during the merge.
Example:
If foo-sampled.profdata and bar-sampled.profdata are binary sampled profiles:
Old behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -output foobar-sampled.profdata
$ llvm-profdata show -sample foobar-sampled.profdata
error: foobar-sampled.profdata:1: Expected 'mangled_name:NUM:NUM', found lprofi
This change adds basic checks for valid input data when assuming text input.
It also makes error messages related to file format validity more specific about
the assumbed profile data type.
New behavior:
$ llvm-profdata merge foo-sampled.profdata bar-sampled.profdata -o foobar-sampled.profdata
error: foo.profdata: Unrecognized instrumentation profile encoding format
Perhaps you forgot to use the -sample option?
Reviewers: bogner, davidxl, dnovillo
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14558
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252916 91177308-0d34-0410-b5e6-96231b3b80d8
In `MachOObjectFile::getSymbolType` we currently always return `SymbolRef::ST_Function` for symbols from any section. In order for llvm-symbolizer to correctly symbolize Mach-O globals, symbols from data and BSS sections should return `SymbolRef::ST_Data`.
Differential Revision: http://reviews.llvm.org/D14576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252867 91177308-0d34-0410-b5e6-96231b3b80d8
