LoopUnroll is a loop pass, so the analysis of OptimizationRemarkEmitter
is added to the common function analysis passes that loop passes
depend on.
The BFI and indirectly BPI used in this pass is computed lazily so no
overhead should be observed unless -pass-remarks-with-hotness is used.
This is how the patch affects the O3 pipeline:
Dominator Tree Construction
Natural Loop Information
Canonicalize natural loops
Loop-Closed SSA Form Pass
Basic Alias Analysis (stateless AA impl)
Function Alias Analysis Results
Scalar Evolution Analysis
+ Lazy Branch Probability Analysis
+ Lazy Block Frequency Analysis
+ Optimization Remark Emitter
Loop Pass Manager
Rotate Loops
Loop Invariant Code Motion
Unswitch loops
Simplify the CFG
Dominator Tree Construction
Basic Alias Analysis (stateless AA impl)
Function Alias Analysis Results
Combine redundant instructions
Natural Loop Information
Canonicalize natural loops
Loop-Closed SSA Form Pass
Scalar Evolution Analysis
+ Lazy Branch Probability Analysis
+ Lazy Block Frequency Analysis
+ Optimization Remark Emitter
Loop Pass Manager
Induction Variable Simplification
Recognize loop idioms
Delete dead loops
Unroll loops
...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277203 91177308-0d34-0410-b5e6-96231b3b80d8
Allowed loop vectorization with secondary FP IVs. Like this:
float *A;
float x = init;
for (int i=0; i < N; ++i) {
A[i] = x;
x -= fp_inc;
}
The auto-vectorization is possible when the induction binary operator is "fast" or the function has "unsafe" attribute.
Differential Revision: https://reviews.llvm.org/D21330
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276554 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Make isGuaranteedToExecute use the
isGuaranteedToTransferExecutionToSuccessor helper, and make that helper
a bit more accurate.
There's a potential performance impact here from assuming that arbitrary
calls might not return. This probably has little impact on loads and
stores to a pointer because most things alias analysis can reason about
are dereferenceable anyway. The other impacts, like less aggressive
hoisting of sdiv by a variable and less aggressive hoisting around
volatile memory operations, are unlikely to matter for real code.
This also impacts SCEV, which uses the same helper. It's a minor
improvement there because we can tell that, for example, memcpy always
returns normally. Strictly speaking, it's also introducing
a bug, but it's not any worse than everywhere else we assume readonly
functions terminate.
Fixes http://llvm.org/PR27857.
Reviewers: hfinkel, reames, chandlerc, sanjoy
Subscribers: broune, llvm-commits
Differential Revision: http://reviews.llvm.org/D21167
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272489 91177308-0d34-0410-b5e6-96231b3b80d8
When we traced through a phi node looking for floating-point reductions, we
forgot whether we'd ever seen an instruction without fast-math flags (that
would block vectorization). This propagates it through to the end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271015 91177308-0d34-0410-b5e6-96231b3b80d8
Allow vectorization when the step is a loop-invariant variable.
This is the loop example that is getting vectorized after the patch:
int int_inc;
int bar(int init, int *restrict A, int N) {
int x = init;
for (int i=0;i<N;i++){
A[i] = x;
x += int_inc;
}
return x;
}
"x" is an induction variable with *loop-invariant* step.
But it is not a primary induction. Primary induction variable with non-constant step is not handled yet.
Differential Revision: http://reviews.llvm.org/D19258
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269023 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Some PHIs can have expressions that are not AddRecExprs due to the presence
of sext/zext instructions. In order to prevent the Loop Vectorizer from
bailing out when encountering these PHIs, we now coerce the SCEV
expressions to AddRecExprs using SCEV predicates (when possible).
We only do this when the alternative would be to not vectorize.
Reviewers: mzolotukhin, anemet
Subscribers: mssimpso, sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17153
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268633 91177308-0d34-0410-b5e6-96231b3b80d8
E.g. for:
!1 = {"llvm.distribute", i32 1}
it now returns the MDOperand for 1.
I will use this in LoopDistribution to check the value of the metadata.
Note that the change is backward-compatible with its current use in
LoopVersioningLICM. An Optional implicitly converts to a bool depending
whether it contains a value or not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267190 91177308-0d34-0410-b5e6-96231b3b80d8
This patch ensures that when we detect first-order recurrences, we reject a phi
node if its previous value is also a phi node. During vectorization the initial
and previous values of the recurrence are shuffled together to create the value
for the current iteration. However, phi nodes are not widened like other
instructions. This fixes PR27246.
Differential Revision: http://reviews.llvm.org/D18971
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265983 91177308-0d34-0410-b5e6-96231b3b80d8
The vectorization of first-order recurrences (r261346) caused PR26734. When
detecting these recurrences, we need to ensure that the previous value is
actually defined inside the loop. This patch includes the fix and test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262624 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables the vectorization of first-order recurrences. A first-order
recurrence is a non-reduction recurrence relation in which the value of the
recurrence in the current loop iteration equals a value defined in the previous
iteration. The load PRE of the GVN pass often creates these recurrences by
hoisting loads from within loops.
In this patch, we add a new recurrence kind for first-order phi nodes and
attempt to vectorize them if possible. Vectorization is performed by shuffling
the values for the current and previous iterations. The vectorization cost
estimate is updated to account for the added shuffle instruction.
Contributed-by: Matthew Simpson and Chad Rosier <mcrosier@codeaurora.org>
Differential Revision: http://reviews.llvm.org/D16197
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261346 91177308-0d34-0410-b5e6-96231b3b80d8
routine.
We were getting this wrong in small ways and generally being very
inconsistent about it across loop passes. Instead, let's have a common
place where we do this. One minor downside is that this will require
some analyses like SCEV in more places than they are strictly needed.
However, this seems benign as these analyses are complete no-ops, and
without this consistency we can in many cases end up with the legacy
pass manager scheduling deciding to split up a loop pass pipeline in
order to run the function analysis half-way through. It is very, very
annoying to fix these without just being very pedantic across the board.
The only loop passes I've not updated here are ones that use
AU.setPreservesAll() such as IVUsers (an analysis) and the pass printer.
They seemed less relevant.
With this patch, almost all of the problems in PR24804 around loop pass
pipelines are fixed. The one remaining issue is that we run simplify-cfg
and instcombine in the middle of the loop pass pipeline. We've recently
added some loop variants of these passes that would seem substantially
cleaner to use, but this at least gets us much closer to the previous
state. Notably, the seven loop pass managers is down to three.
I've not updated the loop passes using LoopAccessAnalysis because that
analysis hasn't been fully wired into LoopSimplify/LCSSA, and it isn't
clear that those transforms want to support those forms anyways. They
all run late anyways, so this is harmless. Similarly, LSR is left alone
because it already carefully manages its forms and doesn't need to get
fused into a single loop pass manager with a bunch of other loop passes.
LoopReroll didn't use loop simplified form previously, and I've updated
the test case to match the trivially different output.
Finally, I've also factored all the pass initialization for the passes
that use this technique as well, so that should be done regularly and
reliably.
Thanks to James for the help reviewing and thinking about this stuff,
and Ben for help thinking about it as well!
Differential Revision: http://reviews.llvm.org/D17435
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261316 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change creates a layer over ScalarEvolution for LAA and LV, and centralizes the
usage of SCEV predicates. The SCEVPredicatedLayer takes the statically deduced knowledge
by ScalarEvolution and applies the knowledge from the SCEV predicates. The end goal is
that both LAA and LV should use this interface everywhere.
This also solves a problem involving the result of SCEV expression rewritting when
the predicate changes. Suppose we have the expression (sext {a,+,b}) and two predicates
P1: {a,+,b} has nsw
P2: b = 1.
Applying P1 and then P2 gives us {a,+,1}, while applying P2 and the P1 gives us
sext({a,+,1}) (the AddRec expression was changed by P2 so P1 no longer applies).
The SCEVPredicatedLayer maintains the order of transformations by feeding back
the results of previous transformations into new transformations, and therefore
avoiding this issue.
The SCEVPredicatedLayer maintains a cache to remember the results of previous
SCEV rewritting results. This also has the benefit of reducing the overall number
of expression rewrites.
Reviewers: mzolotukhin, anemet
Subscribers: jmolloy, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D14296
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255115 91177308-0d34-0410-b5e6-96231b3b80d8
We're currently losing any fast-math flags when synthesizing fcmps for
min/max reductions. In LV, make sure we copy over the scalar inst's
flags. In LoopUtils, we know we only ever match patterns with
hasUnsafeAlgebra, so apply that to any synthesized ops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248201 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables small size reductions in which the source types are smaller
than the reduction type (e.g., computing an i16 sum from the values in an i8
array). The previous behavior was to only allow small size reductions if the
source types and reduction type were the same. The change accounts for the fact
that the existing sign- and zero-extend instructions in these cases should
still be included in the cost model.
Differential Revision: http://reviews.llvm.org/D12770
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247337 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike scalar operations, we can perform vector operations on element types that
are smaller than the native integer types. We type-promote scalar operations if
they are smaller than a native type (e.g., i8 arithmetic is promoted to i32
arithmetic on Arm targets). This patch detects and removes type-promotions
within the reduction detection framework, enabling the vectorization of small
size reductions.
In the legality phase, we look through the ANDs and extensions that InstCombine
creates during promotion, keeping track of the smaller type. In the
profitability phase, we use the smaller type and ignore the ANDs and extensions
in the cost model. Finally, in the code generation phase, we truncate the result
of the reduction to allow InstCombine to rewrite the entire expression in the
smaller type.
This fixes PR21369.
http://reviews.llvm.org/D12202
Patch by Matt Simpson <mssimpso@codeaurora.org>!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246149 91177308-0d34-0410-b5e6-96231b3b80d8
... and move it into LoopUtils where it can be used by other passes, just like ReductionDescriptor. The API is very similar to ReductionDescriptor - that is, not very nice at all. Sorting these both out will come in a followup.
NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246145 91177308-0d34-0410-b5e6-96231b3b80d8
Exposed findDefsUsedOutsideOfLoop as a loop utility function by moving
it from LoopDistribute to LoopUtils.
Reviewed By: anemet
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245416 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves the verification of fast-math to just before vectorization is done. This way we can tell clang to append the command line options would that allow floating-point commutativity. Specifically those are enableing fast-math or specifying a loop hint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244489 91177308-0d34-0410-b5e6-96231b3b80d8
A reduction is a special kind of recurrence. In the loop vectorizer we currently
identify basic reductions. Future patches will extend this to identifying basic
recurrences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239835 91177308-0d34-0410-b5e6-96231b3b80d8
isInductionPHI wants to calculate the stride based on the pointee size.
However, this is not possible when the pointee is zero sized.
This fixes PR23763.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239143 91177308-0d34-0410-b5e6-96231b3b80d8
This patch refactors the definition of common utility function "isInductionPHI" to LoopUtils.cpp.
This fixes compilation error when configured with -DBUILD_SHARED_LIBS=ON
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235577 91177308-0d34-0410-b5e6-96231b3b80d8
