Summary: There are certain requirements for debug location of debug intrinsics, e.g. the scope of the DILocalVariable should be the same as the scope of its debug location. As a result, we should not add discriminator encoding for debug intrinsics.
Reviewers: dblaikie, aprantl
Reviewed By: aprantl
Subscribers: JDevlieghere, aprantl, bjope, sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D39343
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316703 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of trying to keep LastWidenRecipe updated after creating each recipe,
have tryToWiden() retrieve the last recipe of the current VPBasicBlock and check
if it's a VPWidenRecipe when attempting to extend its range. This ensures that
such extensions, optimized to maintain the original instruction order, do so
only when the instructions are to maintain their relative order. The latter does
not always hold, e.g., when a cast needs to sink to unravel first order
recurrence (r306884).
Testcase derived from reproducer of PR34711.
Differential Revision: https://reviews.llvm.org/D38339
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314981 91177308-0d34-0410-b5e6-96231b3b80d8
When type shrinking reductions, we should insert the truncations and extends at
the end of the loop latch block. Previously, these instructions were inserted
at the end of the loop header block. The difference is only a problem for loops
with predicated instructions (e.g., conditional stores and instructions that
may divide by zero). For these instructions, we create new basic blocks inside
the vectorized loop, which cause the loop header and latch to no longer be the
same block. This should fix PR34687.
Reference: https://bugs.llvm.org/show_bug.cgi?id=34687
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314542 91177308-0d34-0410-b5e6-96231b3b80d8
The 1st attempt at this:
https://reviews.llvm.org/rL314117
was reverted at:
https://reviews.llvm.org/rL314118
because of bot fails for clang tests that were checking optimized IR. That should be fixed with:
https://reviews.llvm.org/rL314144
...so try again.
Original commit message:
The transform to convert an extract-of-a-select-of-vectors was added at:
https://reviews.llvm.org/rL194013
And a question about the validity of this transform was raised in the review:
https://reviews.llvm.org/D1539:
...but not answered AFAICT>
Most of the motivating cases in that patch are now handled by other combines. These are the tests that were added with
the original commit, but they are not regressing even after we remove the transform in this patch.
The diffs we see after removing this transform cause us to avoid increasing the instruction count, so we don't want to do
those transforms as canonicalizations.
The motivation for not turning a vector-select-of-vectors into a scalar operation is shown in PR33301:
https://bugs.llvm.org/show_bug.cgi?id=33301
...in those cases, we'll get vector ops with this patch rather than the vector/scalar mix that we currently see.
Differential Revision: https://reviews.llvm.org/D38006
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314147 91177308-0d34-0410-b5e6-96231b3b80d8
The transform to convert an extract-of-a-select-of-vectors was added at:
rL194013
And a question about the validity of this transform was raised in the review:
https://reviews.llvm.org/D1539:
...but not answered AFAICT>
Most of the motivating cases in that patch are now handled by other combines. These are the tests that were added with
the original commit, but they are not regressing even after we remove the transform in this patch.
The diffs we see after removing this transform cause us to avoid increasing the instruction count, so we don't want to do
those transforms as canonicalizations.
The motivation for not turning a vector-select-of-vectors into a scalar operation is shown in PR33301:
https://bugs.llvm.org/show_bug.cgi?id=33301
...in those cases, we'll get vector ops with this patch rather than the vector/scalar mix that we currently see.
Differential Revision: https://reviews.llvm.org/D38006
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314117 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes pr34283, which exposed that the computation of
maximum legal width for vectorization was wrong, because it relied
on MaxInterleaveFactor to obtain the maximum stride used in the loop,
however not all strided accesses in the loop have an interleave-group
associated with them.
Instead of recording the maximum stride in the loop, which can be over
conservative (e.g. if the access with the maximum stride is not involved
in the dependence limitation), this patch tracks the actual maximum legal
width imposed by accesses that are involved in dependencies.
Differential Revision: https://reviews.llvm.org/D37507
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313237 91177308-0d34-0410-b5e6-96231b3b80d8
These are changes to reduce redundant computations when calculating a
feasible vectorization factor:
1. early return when target has no vector registers
2. don't compute register usage for the default VF.
Suggested during review for D37702.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313176 91177308-0d34-0410-b5e6-96231b3b80d8
When converting a PHI into a series of 'select' instructions to combine the
incoming values together according their edge masks, initialize the first
value to the incoming value In0 of the first predecessor, instead of
generating a redundant assignment 'select(Cond[0], In0, In0)'. The latter
fails when the Cond[0] mask is null, representing a full mask, which can
happen only when there's a single incoming value.
No functional changes intended nor expected other than surviving null Cond[0]'s.
This fix follows D35725, which introduced using null to represent full masks.
Differential Revision: https://reviews.llvm.org/D37619
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313119 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When the MaxVectorSize > ConstantTripCount, we should just clamp the
vectorization factor to be the ConstantTripCount.
This vectorizes loops where the TinyTripCountThreshold >= TripCount < MaxVF.
Earlier we were finding the maximum vector width, which could be greater than
the trip count itself. The Loop vectorizer does all the work for generating a
vectorizable loop, but in the end we would always choose the scalar loop (since
the VF > trip count). This allows us to choose the VF keeping in mind the trip
count if available.
This is a fix on top of rL312472.
Reviewers: Ayal, zvi, hfinkel, dneilson
Reviewed by: Ayal
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37702
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313046 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Improve how MaxVF is computed while taking into account that MaxVF should not be larger than the loop's trip count.
Other than saving on compile-time by pruning the possible MaxVF candidates, this patch fixes pr34438 which exposed the following flow:
1. Short trip count identified -> Don't bail out, set OptForSize:=True to avoid tail-loop and runtime checks.
2. Compute MaxVF returned 16 on a target supporting AVX512.
3. OptForSize -> choose VF:=MaxVF.
4. Bail out because TripCount = 8, VF = 16, TripCount % VF !=0 means we need a tail loop.
With this patch step 2. will choose MaxVF=8 based on TripCount.
Reviewers: Ayal, dorit, mkuper, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D37425
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312472 91177308-0d34-0410-b5e6-96231b3b80d8
This change simplifies code that has to deal with
DIGlobalVariableExpression and mirrors how we treat DIExpressions in
debug info intrinsics. Before this change there were two ways of
representing empty expressions on globals, a nullptr and an empty
!DIExpression().
If someone needs to upgrade out-of-tree testcases:
perl -pi -e 's/(!DIGlobalVariableExpression\(var: ![0-9]*)\)/\1, expr: !DIExpression())/g' <MYTEST.ll>
will catch 95%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312144 91177308-0d34-0410-b5e6-96231b3b80d8
We were handling some vectors in foldSelectIntoOp, but not if the operand of the bin op was any kind of vector constant. This patch fixes it to treat vector splats the same as scalars.
Differential Revision: https://reviews.llvm.org/D37232
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311940 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit r311077 of D32871 was reverted in r311304 due to failures
reported in PR34248.
This recommit fixes PR34248 by restricting the packing of predicated scalars
into vectors only when vectorizing, avoiding doing so when unrolling w/o
vectorizing. Added a test derived from the reproducer of PR34248.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311849 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The New Pass Manager infrastructure was forgetting to keep around the optimization remark yaml file that the compiler might have been producing. This meant setting the option to '-' for stdout worked, but setting it to a filename didn't give file output (presumably it was deleted because compilation didn't explicitly keep it). This change just ensures that the file is kept if compilation succeeds.
So far I have updated one of the optimization remark output tests to add a version with the new pass manager. It is my intention for this patch to also include changes to all tests that use `-opt-remark-output=` but I wanted to get the code patch ready for review while I was making all those changes.
Fixes https://bugs.llvm.org/show_bug.cgi?id=33951
Reviewers: anemet, chandlerc
Reviewed By: anemet, chandlerc
Subscribers: javed.absar, chandlerc, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D36906
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311271 91177308-0d34-0410-b5e6-96231b3b80d8
VPlan is an ongoing effort to refactor and extend the Loop Vectorizer. This
patch introduces the VPlan model into LV and uses it to represent the vectorized
code and drive the generation of vectorized IR.
In this patch VPlan models the vectorized loop body: the vectorized control-flow
is represented using VPlan's Hierarchical CFG, with predication refactored from
being a post-vectorization-step into a vectorization planning step modeling
if-then VPRegionBlocks, and generating code inline with non-predicated code. The
vectorized code within each VPBasicBlock is represented as a sequence of
Recipes, each responsible for modelling and generating a sequence of IR
instructions. To keep the size of this commit manageable the Recipes in this
patch are coarse-grained and capture large chunks of LV's code-generation logic.
The constructed VPlans are dumped in dot format under -debug.
This commit retains current vectorizer output, except for minor instruction
reorderings; see associated modifications to lit tests.
For further details on the VPlan model see docs/Proposals/VectorizationPlan.rst
and its references.
Authors: Gil Rapaport and Ayal Zaks
Differential Revision: https://reviews.llvm.org/D32871
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311077 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When vectorizing fcmps we can trip on incorrect cast assertion when setting the
FastMathFlags after generating the vectorized FCmp.
This can happen if the FCmp can be folded to true or false directly. The fix
here is to set the FastMathFlag using the FastMathFlagBuilder *before* creating
the FCmp Instruction. This is what's done by other optimizations such as
InstCombine.
Added a test case which trips on cast assertion without this patch.
Reviewers: Ayal, mssimpso, mkuper, gilr
Reviewed by: Ayal, mssimpso
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D36244
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310389 91177308-0d34-0410-b5e6-96231b3b80d8
The Loop Vectorizer generates redundant operations when manipulating masks:
AND with true, OR with false, compare equal to true. Instead of relying on
a subsequent pass to clean them up, this patch avoids generating them.
Use null (no-mask) to represent all-one full masks, instead of a constant
all-one vector, following the convention of masked gathers and scatters.
Preparing for a follow-up VPlan patch in which these mask manipulating
operations are modeled using recipes.
Differential Revision: https://reviews.llvm.org/D35725
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309558 91177308-0d34-0410-b5e6-96231b3b80d8
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309426 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When simplifying unconditional branches from empty blocks, we pre-test if the
BB belongs to a set of loop headers and keep the block to prevent passes from
destroying canonical loop structure. However, the current algorithm fails if
the destination of the branch is a loop header. Especially when such a loop's
latch block is folded into loop header it results in additional backedges and
LoopSimplify turns it into a nested loop which prevent later optimizations
from being applied (e.g., loop unrolling and loop interleaving).
This patch augments the existing algorithm by further checking if the
destination of the branch belongs to a set of loop headers and defer
eliminating it if yes to LateSimplifyCFG.
Fixes PR33605: https://bugs.llvm.org/show_bug.cgi?id=33605
Reviewers: efriedma, mcrosier, pacxx, hsung, davidxl
Reviewed By: efriedma
Subscribers: ashutosh.nema, gberry, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D35411
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308422 91177308-0d34-0410-b5e6-96231b3b80d8
Generate a single test to decide if there are enough iterations to jump to the
vectorized loop, or else go to the scalar remainder loop. This test compares the
Scalar Trip Count: if STC < VF * UF go to the scalar loop. If
requiresScalarEpilogue() holds, at-least one iteration must remain scalar; the
rest can be used to form vector iterations. So in this case the test checks
instead if (STC - 1) < VF * UF by comparing STC <= VF * UF, and going to the
scalar loop if so. Otherwise the vector loop is entered for at-least one vector
iteration.
This test covers the case where incrementing the backedge-taken count will
overflow leading to an incorrect trip count of zero. In this (rare) case we will
also avoid the vector loop and jump to the scalar loop.
This patch simplifies the existing tests and effectively removes the basic-block
originally named "min.iters.checked", leaving the single test in block
"vector.ph".
Original observation and initial patch by Evgeny Stupachenko.
Differential Revision: https://reviews.llvm.org/D34150
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308421 91177308-0d34-0410-b5e6-96231b3b80d8
using runtime checks
Extend the SCEVPredicateRewriter to work a bit harder when it encounters an
UnknownSCEV for a Phi node; Try to build an AddRecurrence also for Phi nodes
whose update chain involves casts that can be ignored under the proper runtime
overflow test. This is one step towards addressing PR30654.
Differential revision: http://reviews.llvm.org/D30041
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308299 91177308-0d34-0410-b5e6-96231b3b80d8
I'm looking at a cmp transform in InstCombine that would affect these tests,
but it's hard to know if it makes things better or worse without seeing the
full IR. OTOH, maybe these tests shouldn't be running a bunch of transform
passes in the first place?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307475 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
vectorizer-maximize-bandwidth is generally useful in terms of performance. I've tested the impact of changing this to default on speccpu benchmarks on sandybridge machines. The result shows non-negative impact:
spec/2006/fp/C++/444.namd 26.84 -0.31%
spec/2006/fp/C++/447.dealII 46.19 +0.89%
spec/2006/fp/C++/450.soplex 42.92 -0.44%
spec/2006/fp/C++/453.povray 38.57 -2.25%
spec/2006/fp/C/433.milc 24.54 -0.76%
spec/2006/fp/C/470.lbm 41.08 +0.26%
spec/2006/fp/C/482.sphinx3 47.58 -0.99%
spec/2006/int/C++/471.omnetpp 22.06 +1.87%
spec/2006/int/C++/473.astar 22.65 -0.12%
spec/2006/int/C++/483.xalancbmk 33.69 +4.97%
spec/2006/int/C/400.perlbench 33.43 +1.70%
spec/2006/int/C/401.bzip2 23.02 -0.19%
spec/2006/int/C/403.gcc 32.57 -0.43%
spec/2006/int/C/429.mcf 40.35 +0.27%
spec/2006/int/C/445.gobmk 26.96 +0.06%
spec/2006/int/C/456.hmmer 24.4 +0.19%
spec/2006/int/C/458.sjeng 27.91 -0.08%
spec/2006/int/C/462.libquantum 57.47 -0.20%
spec/2006/int/C/464.h264ref 46.52 +1.35%
geometric mean +0.29%
The regression on 453.povray seems real, but is due to secondary effects as all hot functions are bit-identical with and without the flag.
I started this patch to consult upstream opinions on this. It will be greatly appreciated if the community can help test the performance impact of this change on other architectures so that we can decided if this should be target-dependent.
Reviewers: hfinkel, mkuper, davidxl, chandlerc
Reviewed By: chandlerc
Subscribers: rengolin, sanjoy, javed.absar, bjope, dorit, magabari, RKSimon, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306933 91177308-0d34-0410-b5e6-96231b3b80d8
Check if a single cast is preventing handling a first-order-recurrence Phi,
because the scheduling constraints it imposes on the first-order-recurrence
shuffle are infeasible; but they can be made feasible by moving the cast
downwards. Record such casts and move them when vectorizing the loop.
Differential Revision: https://reviews.llvm.org/D33058
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306884 91177308-0d34-0410-b5e6-96231b3b80d8
It may be detrimental to vectorize loops with very small trip count, as various
costs of the vectorized loop body as well as enclosing overheads including
runtime tests and scalar iterations may outweigh the gains of vectorizing. The
current cost model measures the cost of the vectorized loop body only, expecting
it will amortize other costs, and loops with known or expected very small trip
counts are not vectorized at all. This patch allows loops with very small trip
counts to be vectorized, but under OptForSize constraints, which ensure the cost
of the loop body is dominant, having no runtime guards nor scalar iterations.
Patch inspired by D32451.
Differential Revision: https://reviews.llvm.org/D34373
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306803 91177308-0d34-0410-b5e6-96231b3b80d8
r306381 caused PR33613, by reversing the order in which insertelements were
generated per unroll part. This patch fixes PR33613 by retraining this order,
placing each set of insertelements per part immediately after the last scalar
being packed for this part. Includes a test case derived from PR33613.
Reference: https://bugs.llvm.org/show_bug.cgi?id=33613
Differential Revision: https://reviews.llvm.org/D34760
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306575 91177308-0d34-0410-b5e6-96231b3b80d8
This canonicalization was suggested in D33172 as a way to make InstCombine behavior more uniform.
We have this transform for icmp+br, so unless there's some reason that icmp+select should be
treated differently, we should do the same thing here.
The benefit comes from increasing the chances of creating identical instructions. This is shown in
the tests in logical-select.ll (PR32791). InstCombine doesn't fold those directly, but EarlyCSE
can simplify the identical cmps, and then InstCombine can fold the selects together.
The possible regression for the tests in select.ll raises questions about poison/undef:
http://lists.llvm.org/pipermail/llvm-dev/2017-May/113261.html
...but that transform is just as likely to be triggered by this canonicalization as it is to be
missed, so we're just pointing out a commutation deficiency in the pattern matching:
https://reviews.llvm.org/rL228409
Differential Revision: https://reviews.llvm.org/D34242
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306435 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
vectorizer-maximize-bandwidth is generally useful in terms of performance. I've tested the impact of changing this to default on speccpu benchmarks on sandybridge machines. The result shows non-negative impact:
spec/2006/fp/C++/444.namd 26.84 -0.31%
spec/2006/fp/C++/447.dealII 46.19 +0.89%
spec/2006/fp/C++/450.soplex 42.92 -0.44%
spec/2006/fp/C++/453.povray 38.57 -2.25%
spec/2006/fp/C/433.milc 24.54 -0.76%
spec/2006/fp/C/470.lbm 41.08 +0.26%
spec/2006/fp/C/482.sphinx3 47.58 -0.99%
spec/2006/int/C++/471.omnetpp 22.06 +1.87%
spec/2006/int/C++/473.astar 22.65 -0.12%
spec/2006/int/C++/483.xalancbmk 33.69 +4.97%
spec/2006/int/C/400.perlbench 33.43 +1.70%
spec/2006/int/C/401.bzip2 23.02 -0.19%
spec/2006/int/C/403.gcc 32.57 -0.43%
spec/2006/int/C/429.mcf 40.35 +0.27%
spec/2006/int/C/445.gobmk 26.96 +0.06%
spec/2006/int/C/456.hmmer 24.4 +0.19%
spec/2006/int/C/458.sjeng 27.91 -0.08%
spec/2006/int/C/462.libquantum 57.47 -0.20%
spec/2006/int/C/464.h264ref 46.52 +1.35%
geometric mean +0.29%
The regression on 453.povray seems real, but is due to secondary effects as all hot functions are bit-identical with and without the flag.
I started this patch to consult upstream opinions on this. It will be greatly appreciated if the community can help test the performance impact of this change on other architectures so that we can decided if this should be target-dependent.
Reviewers: hfinkel, mkuper, davidxl, chandlerc
Reviewed By: chandlerc
Subscribers: rengolin, sanjoy, javed.absar, bjope, dorit, magabari, RKSimon, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306336 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
vectorizer-maximize-bandwidth is generally useful in terms of performance. I've tested the impact of changing this to default on speccpu benchmarks on sandybridge machines. The result shows non-negative impact:
spec/2006/fp/C++/444.namd 26.84 -0.31%
spec/2006/fp/C++/447.dealII 46.19 +0.89%
spec/2006/fp/C++/450.soplex 42.92 -0.44%
spec/2006/fp/C++/453.povray 38.57 -2.25%
spec/2006/fp/C/433.milc 24.54 -0.76%
spec/2006/fp/C/470.lbm 41.08 +0.26%
spec/2006/fp/C/482.sphinx3 47.58 -0.99%
spec/2006/int/C++/471.omnetpp 22.06 +1.87%
spec/2006/int/C++/473.astar 22.65 -0.12%
spec/2006/int/C++/483.xalancbmk 33.69 +4.97%
spec/2006/int/C/400.perlbench 33.43 +1.70%
spec/2006/int/C/401.bzip2 23.02 -0.19%
spec/2006/int/C/403.gcc 32.57 -0.43%
spec/2006/int/C/429.mcf 40.35 +0.27%
spec/2006/int/C/445.gobmk 26.96 +0.06%
spec/2006/int/C/456.hmmer 24.4 +0.19%
spec/2006/int/C/458.sjeng 27.91 -0.08%
spec/2006/int/C/462.libquantum 57.47 -0.20%
spec/2006/int/C/464.h264ref 46.52 +1.35%
geometric mean +0.29%
The regression on 453.povray seems real, but is due to secondary effects as all hot functions are bit-identical with and without the flag.
I started this patch to consult upstream opinions on this. It will be greatly appreciated if the community can help test the performance impact of this change on other architectures so that we can decided if this should be target-dependent.
Reviewers: hfinkel, mkuper, davidxl, chandlerc
Reviewed By: chandlerc
Subscribers: rengolin, sanjoy, javed.absar, bjope, dorit, magabari, RKSimon, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305960 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Existing heuristic uses the ratio between the function entry
frequency and the loop invocation frequency to find cold loops. However,
even if the loop executes frequently, if it has a small trip count per
each invocation, vectorization is not beneficial. On the other hand,
even if the loop invocation frequency is much smaller than the function
invocation frequency, if the trip count is high it is still beneficial
to vectorize the loop.
This patch uses estimated trip count computed from the profile metadata
as a primary metric to determine coldness of the loop. If the estimated
trip count cannot be computed, it falls back to the original heuristics.
Reviewers: Ayal, mssimpso, mkuper, danielcdh, wmi, tejohnson
Reviewed By: tejohnson
Subscribers: tejohnson, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32451
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305729 91177308-0d34-0410-b5e6-96231b3b80d8
