There may be many invokes that share one landing pad, and the previous code
would record the landing pad once for each invoke. Besides the wasted
effort, a pair of volatile loads gets inserted every time the landing pad is
processed. The rest of the code can get optimized away when a landing pad
is processed repeatedly, but the volatile loads remain, resulting in code like:
LBB35_18:
Ltmp483:
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r2, [r7, #-72]
ldr r2, [r7, #-68]
ldr r4, [r7, #-72]
ldr r2, [r7, #-68]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144787 91177308-0d34-0410-b5e6-96231b3b80d8
This same basic code was in the older version of the SjLj exception handling,
but it was removed in the recent revisions to that code. It needs to be there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144782 91177308-0d34-0410-b5e6-96231b3b80d8
%arrayidx135 = getelementptr inbounds [4 x [4 x [4 x [4 x i32]]]]* %M0, i32 0, i64 0
%arrayidx136 = getelementptr inbounds [4 x [4 x [4 x i32]]]* %arrayidx135, i32 0, i64 %idxprom134
Prior to this commit, the GEP instruction that defines %arrayidx136 thought that
%arrayidx135 was a trivial kill. The GEP that defines %arrayidx135 doesn't
generate any code and thus %M0 gets folded into the second GEP. Thus, we need
to look through GEPs with all zero indices.
rdar://10443319
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144730 91177308-0d34-0410-b5e6-96231b3b80d8
has a reference to it. Unfortunately, that doesn't work for codegen passes
since we don't get notified of MBB's being deleted (the original BB stays).
Use that fact to our advantage and after printing a function, check if
any of the IL BBs corresponds to a symbol that was not printed. This fixes
pr11202.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144674 91177308-0d34-0410-b5e6-96231b3b80d8
block sequence when recovering from unanalyzable control flow
constructs, *always* use the function sequence. I'm not sure why I ever
went down the path of trying to use the loop sequence, it is
fundamentally not the correct sequence to use. We're trying to preserve
the incoming layout in the cases of unreasonable control flow, and that
is only encoded at the function level. We already have a filter to
select *exactly* the sub-set of blocks within the function that we're
trying to form into a chain.
The resulting code layout is also significantly better because of this.
In several places we were ending up with completely unreasonable control
flow constructs due to the ordering chosen by the loop structure for its
internal storage. This change removes a completely wasteful vector of
basic blocks, saving memory allocation in the common case even though it
costs us CPU in the fairly rare case of unnatural loops. Finally, it
fixes the latest crasher reduced out of GCC's single source. Thanks
again to Benjamin Kramer for the reduction, my bugpoint skills failed at
it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144627 91177308-0d34-0410-b5e6-96231b3b80d8
Two new TargetInstrInfo hooks lets the target tell ExecutionDepsFix
about instructions with partial register updates causing false unwanted
dependencies.
The ExecutionDepsFix pass will break the false dependencies if the
updated register was written in the previoius N instructions.
The small loop added to sse-domains.ll runs twice as fast with
dependency-breaking instructions inserted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144602 91177308-0d34-0410-b5e6-96231b3b80d8
Keep track of the last instruction to define each register individually
instead of per DomainValue. This lets us track more accurately when a
register was last written.
Also track register ages across basic blocks. When entering a new
basic block, use the least stale predecessor def as a worst case
estimate for register age.
The register age is used to arbitrate between conflicting domains. The
most recently defined register wins.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144601 91177308-0d34-0410-b5e6-96231b3b80d8
"kill". This looks like a bug upstream. Since that's going to take some time
to understand, loosen the assertion and disable the optimization when
multiple kills are seen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144568 91177308-0d34-0410-b5e6-96231b3b80d8
instructions of the two-address operands) in order to avoid inserting copies.
This fixes the few regressions introduced when the two-address hack was
disabled (without regressing the improvements).
rdar://10422688
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144559 91177308-0d34-0410-b5e6-96231b3b80d8
cleans up all the chains allocated during the processing of each
function so that for very large inputs we don't just grow memory usage
without bound.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144533 91177308-0d34-0410-b5e6-96231b3b80d8
tests when I forcibly enabled block placement.
It is apparantly possible for an unanalyzable block to fallthrough to
a non-loop block. I don't actually beleive this is correct, I believe
that 'canFallThrough' is returning true needlessly for the code
construct, and I've left a bit of a FIXME on the verification code to
try to track down why this is coming up.
Anyways, removing the assert doesn't degrade the correctness of the algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144532 91177308-0d34-0410-b5e6-96231b3b80d8
this pass. We're leaving already merged blocks on the worklist, and
scanning them again and again only to determine each time through that
indeed they aren't viable. We can instead remove them once we're going
to have to scan the worklist. This is the easy way to implement removing
them. If this remains on the profile (as I somewhat suspect it will), we
can get a lot more clever here, as the worklist's order is essentially
irrelevant. We can use swapping and fold the two loops to reduce
overhead even when there are many blocks on the worklist but only a few
of them are removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144531 91177308-0d34-0410-b5e6-96231b3b80d8
time it is queried to compute the probability of a single successor.
This makes computing the probability of every successor of a block in
sequence... really really slow. ;] This switches to a linear walk of the
successors rather than a quadratic one. One of several quadratic
behaviors slowing this pass down.
I'm not really thrilled with moving the sum code into the public
interface of MBPI, but I don't (at the moment) have ideas for a better
interface. My direction I'm thinking in for a better interface is to
have MBPI actually retain much more state and make *all* of these
queries cheap. That's a lot of work, and would require invasive changes.
Until then, this seems like the least bad (ie, least quadratic)
solution. Suggestions welcome.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144530 91177308-0d34-0410-b5e6-96231b3b80d8
correctly handle blocks whose successor weights sum to more than
UINT32_MAX. This is slightly less efficient, but the entire thing is
already linear on the number of successors. Calling it within any hot
routine is a mistake, and indeed no one is calling it. It also
simplifies the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144527 91177308-0d34-0410-b5e6-96231b3b80d8
the sum of the edge weights not overflowing uint32, and crashed when
they did. This is generally safe as BranchProbabilityInfo tries to
provide this guarantee. However, the CFG can get modified during codegen
in a way that grows the *sum* of the edge weights. This doesn't seem
unreasonable (imagine just adding more blocks all with the default
weight of 16), but it is hard to come up with a case that actually
triggers 32-bit overflow. Fortuately, the single-source GCC build is
good at this. The solution isn't very pretty, but its no worse than the
previous code. We're already summing all of the edge weights on each
query, we can sum them, check for an overflow, compute a scale, and sum
them again.
I've included a *greatly* reduced test case out of the GCC source that
triggers it. It's a pretty lame test, as it clearly is just barely
triggering the overflow. I'd like to have something that is much more
definitive, but I don't understand the fundamental pattern that triggers
an explosion in the edge weight sums.
The buggy code is duplicated within this file. I'll colapse them into
a single implementation in a subsequent commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144526 91177308-0d34-0410-b5e6-96231b3b80d8
get loop info structures associated with them, and so we need some way
to make forward progress selecting and placing basic blocks. The
technique used here is pretty brutal -- it just scans the list of blocks
looking for the first unplaced candidate. It keeps placing blocks like
this until the CFG becomes tractable.
The cost is somewhat unfortunate, it requires allocating a vector of all
basic block pointers eagerly. I have some ideas about how to simplify
and optimize this, but I'm trying to get the logic correct first.
Thanks to Benjamin Kramer for the reduced test case out of GCC. Sadly
there are other bugs that GCC is tickling that I'm reducing and working
on now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144516 91177308-0d34-0410-b5e6-96231b3b80d8
This makes no difference for normal defs, but early clobber dead defs
now look like:
[Slot_EarlyClobber; Slot_Dead)
instead of:
[Slot_EarlyClobber; Slot_Register).
Live ranges for normal dead defs look like:
[Slot_Register; Slot_Dead)
as before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144512 91177308-0d34-0410-b5e6-96231b3b80d8
when we fail to place all the blocks of a loop. Currently this is
happening for unnatural loops, and this logic helps more immediately
point to the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144504 91177308-0d34-0410-b5e6-96231b3b80d8
The old naming scheme (load/use/def/store) can be traced back to an old
linear scan article, but the names don't match how slots are actually
used.
The load and store slots are not needed after the deferred spill code
insertion framework was deleted.
The use and def slots don't make any sense because we are using
half-open intervals as is customary in C code, but the names suggest
closed intervals. In reality, these slots were used to distinguish
early-clobber defs from normal defs.
The new naming scheme also has 4 slots, but the names match how the
slots are really used. This is a purely mechanical renaming, but some
of the code makes a lot more sense now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144503 91177308-0d34-0410-b5e6-96231b3b80d8
branches that also may involve fallthrough. In the case of blocks with
no fallthrough, we can still re-order the blocks profitably. For example
instruction decoding will in some cases continue past an indirect jump,
making laying out its most likely successor there profitable.
Note, no test case. I don't know how to write a test case that exercises
this logic, but it matches the described desired semantics in
discussions with Jakob and others. If anyone has a nice example of IR
that will trigger this, that would be lovely.
Also note, there are still assertion failures in real world code with
this. I'm digging into those next, now that I know this isn't the cause.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144499 91177308-0d34-0410-b5e6-96231b3b80d8
second algorithm, but only loosely. It is more heavily based on the last
discussion I had with Andy. It continues to walk from the inner-most
loop outward, but there is a key difference. With this algorithm we
ensure that as we visit each loop, the entire loop is merged into
a single chain. At the end, the entire function is treated as a "loop",
and merged into a single chain. This chain forms the desired sequence of
blocks within the function. Switching to a single algorithm removes my
biggest problem with the previous approaches -- they had different
behavior depending on which system triggered the layout. Now there is
exactly one algorithm and one basis for the decision making.
The other key difference is how the chain is formed. This is based
heavily on the idea Andy mentioned of keeping a worklist of blocks that
are viable layout successors based on the CFG. Having this set allows us
to consistently select the best layout successor for each block. It is
expensive though.
The code here remains very rough. There is a lot that needs to be done
to clean up the code, and to make the runtime cost of this pass much
lower. Very much WIP, but this was a giant chunk of code and I'd rather
folks see it sooner than later. Everything remains behind a flag of
course.
I've added a couple of tests to exercise the issues that this iteration
was motivated by: loop structure preservation. I've also fixed one test
that was exhibiting the broken behavior of the previous version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144495 91177308-0d34-0410-b5e6-96231b3b80d8
Most of this stuff was supporting the old deferred spill code insertion
mechanism. Modern spillers just edit machine code in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144484 91177308-0d34-0410-b5e6-96231b3b80d8
