Split out a new, low-level intrusive list type with clear semantics.
Unlike iplist (and ilist), all operations on simple_ilist are intrusive,
and simple_ilist never takes ownership of its nodes. This enables an
intuitive API that has the right defaults for intrusive lists.
- insert() takes references (not pointers!) to nodes (in iplist/ilist,
passing a reference will cause the node to be copied).
- erase() takes only iterators (like std::list), and does not destroy
the nodes.
- remove() takes only references and has the same behaviour as erase().
- clear() does not destroy the nodes.
- The destructor does not destroy the nodes.
- New API {erase,remove,clear}AndDispose() take an extra Disposer
functor for callsites that want to call some disposal routine (e.g.,
std::default_delete).
This list is not currently configurable, and has no callbacks.
The initial motivation was to fix iplist<>::sort to work correctly (even
with callbacks in ilist_traits<>). iplist<> uses simple_ilist<>::sort
directly. The new test in unittests/IR/ModuleTest.cpp crashes without
this commit.
Fixing sort() via a low-level layer provided a good opportunity to:
- Unit test the low-level functionality thoroughly.
- Modernize the API, largely inspired by other intrusive list
implementations.
Here's a sketch of a longer-term plan:
- Create BumpPtrList<>, a non-intrusive list implemented using
simple_ilist<>, and use it for the Token list in
lib/Support/YAMLParser.cpp. This will factor out the only real use of
createNode().
- Evolve the iplist<> and ilist<> APIs in the direction of
simple_ilist<>, making allocation/deallocation explicit at call sites
(similar to simple_ilist<>::eraseAndDispose()).
- Factor out remaining calls to createNode() and deleteNode() and remove
the customization from ilist_traits<>.
- Transition uses of iplist<>/ilist<> that don't need callbacks over to
simple_ilist<>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280107 91177308-0d34-0410-b5e6-96231b3b80d8
Or they were not instantiated as expected;
llvm::InnerAnalysisManagerProxy<llvm::AnalysisManager<llvm::Function>, llvm::LazyCallGraph::SCC>::PassID
llvm::InnerAnalysisManagerProxy<llvm::AnalysisManager<llvm::Function>, llvm::LazyCallGraph::SCC>::PassID
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280105 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r280016, and the followups of r280017, r280027,
r280051, r280058, and r280059.
MSVC's implementation of std::promise does not get along with
llvm::Error. It uses its promised value too much like a normal value
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280100 91177308-0d34-0410-b5e6-96231b3b80d8
This was missing, meaning the metadata in sunk instructions was potentially bogus and could cause miscompiles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280072 91177308-0d34-0410-b5e6-96231b3b80d8
I've found this out the hard way; LLVM will not normally catch this
error (unless -verify-machineinstrs is passed), and under certain
very specific circumstances (such as register scavenger running
under pressure) this would result in an opaque crash in codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280071 91177308-0d34-0410-b5e6-96231b3b80d8
The coverage reports contain the source or binary file paths. On Windows,
the file path might contain the seperators of both '/' and '\'. This patch
uses the native path in the coverage reports. For example, on Windows,
all '/' are converted to '\'.
Differential Revision: https://reviews.llvm.org/D23922
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280061 91177308-0d34-0410-b5e6-96231b3b80d8
The former is simply wrong -- the code will either never be used or will
always be used, rather than being dependent upon whether it's built with
debug assertions enabled.
The macro DEBUG isn't ever set by the llvm build system. But, the macro
DEBUG(X) is defined (unconditionally) if you happen to include
llvm/Support/Debug.h.
The code in Value.h which was erroneously protected by the #ifdef DEBUG
didn't even compile -- you can't cast<> from an LLVMOpaqueValue
directly. Fortunately, it was never invoked, as Core.cpp included
Value.h before Debug.h.
The conditionalized code in AArch64CollectLOH.cpp was previously always
used, as it includes Debug.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280056 91177308-0d34-0410-b5e6-96231b3b80d8
behaviors, and add a callB (blacking call) primitive.
callB is a blocking call primitive for threaded code where the RPC responses are
being processed on a separate thread. (For single threaded code callST should
continue to be used instead).
No unit test yet: Last time I commited a threaded unit test it deadlocked on
one of the s390x builders. I'll try to re-enable that test first, and add a new
test if I can sort out the deadlock issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280051 91177308-0d34-0410-b5e6-96231b3b80d8
Implement Bill's suggested fix for 32-bit targets for PR22711 (for the
alignment of each entry). As pointed out in the bug report, we could just force
the section alignment, since we only add pointer-sized things currently, but
this fix is somewhat more future-proof.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280049 91177308-0d34-0410-b5e6-96231b3b80d8
I'm working on a lower-level intrusive list that can be used
stand-alone, and splitting the files up a bit will make the code easier
to organize. Explode the ilist headers in advance to improve blame
lists in the future.
- Move ilist_node_base from ilist_node.h to ilist_node_base.h.
- Move ilist_base from ilist.h to ilist_base.h.
- Move ilist_iterator from ilist.h to ilist_iterator.h.
- Move ilist_node_access from ilist.h to ilist_node.h to support
ilist_iterator.
- Update unit tests to #include smaller headers.
- Clang-format the moved things.
I noticed in transit that there is a simplify_type specialization for
ilist_iterator. Since there is no longer an implicit conversion from
ilist<T>::iterator to T*, this doesn't make sense (effectively it's a
form of implicit conversion). For now I've added a FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280047 91177308-0d34-0410-b5e6-96231b3b80d8
The "long call" option forces the use of the indirect calling sequence for all
calls (even those that don't really need it). GCC provides this option; This is
helpful, under certain circumstances, for building very-large binaries, and
some other specialized use cases.
Fixes PR19098.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280040 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Changed this code because it was not very readable.
The one question that I got after changing it is, should we
count calls to intrinsics? We don't add them to caller summary,
so maybe we shouldn't also count them?
Reviewers: tejohnson, eraman, mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23949
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280036 91177308-0d34-0410-b5e6-96231b3b80d8
And rename the tests inside from ilistTest to IListTest. This makes the
file sort properly in the CMakeLists.txt (previously, sorting would
throw it down to the end of the list) and is consistent with the tests
I've added more recently.
Why use IListNodeBaseTest.cpp (and a test name of IListNodeBaseTest)?
- ilist_node_base_test is the obvious thing, since this is testing
ilist_node_base. However, gtest disallows underscores in test names.
- ilist_node_baseTest fails for the same reason.
- ilistNodeBaseTest is weird, because it isn't in our usual
TitleCaseTest form that we use for tests, and it also doesn't have the
name of the tested class in it.
- IlistNodeBaseTest matches TitleCaseTest, but "Ilist" is hard to read,
and really "ilist" is an abbreviation for "IntrusiveList" so the
lowercase "list" is strange.
- That left IListNodeBaseTest.
Note: I made this move in two stages, with a temporary filename of
ilistTestTemp in between in r279524. This was in the hopes of avoiding
problems on Git and SVN clients on case-insensitive filesystems,
particularly on buildbots with incremental checkouts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280033 91177308-0d34-0410-b5e6-96231b3b80d8
Reverse iterators to doubly-linked lists can be simpler (and cheaper)
than std::reverse_iterator. Make it so.
In particular, change ilist<T>::reverse_iterator so that it is *never*
invalidated unless the node it references is deleted. This matches the
guarantees of ilist<T>::iterator.
(Note: MachineBasicBlock::iterator is *not* an ilist iterator, but a
MachineInstrBundleIterator<MachineInstr>. This commit does not change
MachineBasicBlock::reverse_iterator, but it does update
MachineBasicBlock::reverse_instr_iterator. See note at end of commit
message for details on bundle iterators.)
Given the list (with the Sentinel showing twice for simplicity):
[Sentinel] <-> A <-> B <-> [Sentinel]
the following is now true:
1. begin() represents A.
2. begin() holds the pointer for A.
3. end() represents [Sentinel].
4. end() holds the poitner for [Sentinel].
5. rbegin() represents B.
6. rbegin() holds the pointer for B.
7. rend() represents [Sentinel].
8. rend() holds the pointer for [Sentinel].
The changes are #6 and #8. Here are some properties from the old
scheme (which used std::reverse_iterator):
- rbegin() held the pointer for [Sentinel] and rend() held the pointer
for A;
- operator*() cost two dereferences instead of one;
- converting from a valid iterator to its valid reverse_iterator
involved a confusing increment; and
- "RI++->erase()" left RI invalid. The unintuitive replacement was
"RI->erase(), RE = end()".
With vector-like data structures these properties are hard to avoid
(since past-the-beginning is not a valid pointer), and don't impose a
real cost (since there's still only one dereference, and all iterators
are invalidated on erase). But with lists, this was a poor design.
Specifically, the following code (which obviously works with normal
iterators) now works with ilist::reverse_iterator as well:
for (auto RI = L.rbegin(), RE = L.rend(); RI != RE;)
fooThatMightRemoveArgFromList(*RI++);
Converting between iterator and reverse_iterator for the same node uses
the getReverse() function.
reverse_iterator iterator::getReverse();
iterator reverse_iterator::getReverse();
Why doesn't iterator <=> reverse_iterator conversion use constructors?
In order to catch and update old code, reverse_iterator does not even
have an explicit conversion from iterator. It wouldn't be safe because
there would be no reasonable way to catch all the bugs from the changed
semantic (see the changes at call sites that are part of this patch).
Old code used this API:
std::reverse_iterator::reverse_iterator(iterator);
iterator std::reverse_iterator::base();
Here's how to update from old code to new (that incorporates the
semantic change), assuming I is an ilist<>::iterator and RI is an
ilist<>::reverse_iterator:
[Old] ==> [New]
reverse_iterator(I) (--I).getReverse()
reverse_iterator(I) ++I.getReverse()
--reverse_iterator(I) I.getReverse()
reverse_iterator(++I) I.getReverse()
RI.base() (--RI).getReverse()
RI.base() ++RI.getReverse()
--RI.base() RI.getReverse()
(++RI).base() RI.getReverse()
delete &*RI, RE = end() delete &*RI++
RI->erase(), RE = end() RI++->erase()
=======================================
Note: bundle iterators are out of scope
=======================================
MachineBasicBlock::iterator, also known as
MachineInstrBundleIterator<MachineInstr>, is a wrapper to represent
MachineInstr bundles. The idea is that each operator++ takes you to the
beginning of the next bundle. Implementing a sane reverse iterator for
this is harder than ilist. Here are the options:
- Use std::reverse_iterator<MBB::i>. Store a handle to the beginning of
the next bundle. A call to operator*() runs a loop (usually
operator--() will be called 1 time, for unbundled instructions).
Increment/decrement just works. This is the status quo.
- Store a handle to the final node in the bundle. A call to operator*()
still runs a loop, but it iterates one time fewer (usually
operator--() will be called 0 times, for unbundled instructions).
Increment/decrement just works.
- Make the ilist_sentinel<MachineInstr> *always* store that it's the
sentinel (instead of just in asserts mode). Then the bundle iterator
can sniff the sentinel bit in operator++().
I initially tried implementing the end() option as part of this commit,
but updating iterator/reverse_iterator conversion call sites was
error-prone. I have a WIP series of patches that implements the final
option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280032 91177308-0d34-0410-b5e6-96231b3b80d8
Void functions returning error now boolean convert to 'false' if they succeed.
Unit tests updated to reflect this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280027 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fix a couple issues limiting the application of indirect call promotion
in ThinLTO mode:
- Invoke indirect call promotion before globalopt, since it may
eliminate imported functions which appear unreferenced.
- Invoke indirect call promotion with InLTO=true so that the PGOFuncName
metadata is used to get the name for locals which would have been
renamed during promotion.
Reviewers: davidxl, mehdi_amini
Subscribers: Prazek, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24004
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280024 91177308-0d34-0410-b5e6-96231b3b80d8
For little-Endian PowerPC, we generally target only P8 and later by default.
However, generic (older) 64-bit configurations are still an option, and in that
case, partword atomics are not available (e.g. stbcx.). To lower i8/i16 atomics
without true i8/i16 atomic operations, we emulate using i32 atomics in
combination with a bunch of shifting and masking, etc. The amount by which to
shift in little-Endian mode is different from the amount in big-Endian mode (it
is inverted -- meaning we can leave off the xor when computing the amount).
Fixes PR22923.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280022 91177308-0d34-0410-b5e6-96231b3b80d8
Optional.
For void functions the return type of a nonblocking call changes from
Expected<future<Optional<bool>>> to Expected<future<Error>>, and for functions
returning T the return type changes from Expected<future<Optional<T>>> to
Expected<future<Expected<T>>>.
Inner results need to be checked (since the RPC connection may have dropped
out before a result came back) and Error/Expected provide stronger checking
requirements. It also allows us drop the crufty 'optionalToError' function and
just collapse Errors in the single-threaded call primitives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280016 91177308-0d34-0410-b5e6-96231b3b80d8
With the runtimes build we're trying to use LLVMConfig.cmake as a way of providing LLVM_* variables that are needed to behave as if the project is building in tree. To make this work we need to rename two variables by dropping the "S" from the end. This makes the variables match the in-tree names.
This renames:
LLVM_INCLUDE_DIRS -> LLVM_INCLUDE_DIR
LLVM_LIBRARY_DIRS -> LLVM_LIBRARY_DIR
The versions ending in S are not used in-tree anywhere. This also cleans up LLVM_LIBRARY_DIR being set to the same value with and without the "S".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280013 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of putting all possible requests into a single table, we can perform
the extremely dense lookup based on opcode and type-index in constant time
using multi-dimensional array-like things.
This roughly halves the time spent doing legalization, which was dominated by
queries against the Actions table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280011 91177308-0d34-0410-b5e6-96231b3b80d8
According to the arm arm specifications, 4 bytes are needed for a shift instead
of 8, this was causing the movt instruction to write to a different register
sometimes.
Patch by Walter Erquinigo!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280005 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the builtins archives to build into the correct subdirectory under the binary dir. Addresses the issue discussed in D24001.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280002 91177308-0d34-0410-b5e6-96231b3b80d8
After r279649 when getting a vector value from VectorLoopValueMap, we create an
insertelement sequence on-demand if the value has been scalarized instead of
vectorized. We previously inserted this insertelement sequence before the
value's first vector user. However, this insert location is problematic if that
user is the phi node of a first-order recurrence. With this patch, we move the
insertelement sequence after the last scalar instruction we created when
scalarizing the value. Thus, the value's vector definition in the new loop will
immediately follow its scalar definitions. This should fix PR30183.
Reference: https://llvm.org/bugs/show_bug.cgi?id=30183
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280001 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The SILoadStoreOptimizer can now look ahead more then one instruction when
looking for instructions to merge, which greatly improves the number of
loads/stores that we are able to merge.
Moving the pass before scheduling avoids increasing register pressure after
the scheduler, so that the scheduler's register pressure estimates will be
more accurate. It also gives more consistent results, since it is no longer
affected by minor scheduling changes.
Reviewers: arsenm
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: https://reviews.llvm.org/D23814
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279991 91177308-0d34-0410-b5e6-96231b3b80d8
