Summary:
In fuctions that contained debug info but were empty otherwise,
the ARM load/store optimizer could abort. This was because
function MergeReturnIntoLDM handled the special case where a
Machine Basic BLock is empty by calling MBB.empty(). However, this
returns false in presence of debug info, although the function
should be considered empty in the eyes of the load/store optimizer.
This has been fixed by handling the case where searching through the
block finds only debug instructions.
Reviewers: rengolin, dexonsmith, llvm-commits, jmolloy
Subscribers: t.p.northover, aemerson, rengolin, samparker
Differential Revision: https://reviews.llvm.org/D23847
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279820 91177308-0d34-0410-b5e6-96231b3b80d8
Rename AllVRegsAllocated to NoVRegs. This avoids the connotation of
running after register and simply describes that no vregs are used in
a machine function. With that we can simply compute the property and do
not need to dump/parse it in .mir files.
Differential Revision: http://reviews.llvm.org/D23850
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279698 91177308-0d34-0410-b5e6-96231b3b80d8
If the result of the find is only used to compare against end(), just
use is_contained instead.
No functionality change is intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278433 91177308-0d34-0410-b5e6-96231b3b80d8
Initializing them in LLVMInitializeARMTarget() makes them visible early
enough for "llc -run-pass usage".
This required the pass to be renamed from "arm-load-store-opt" to
"arm-ldst-opt", because there already exists an arm-load-store-opt
cl::opt switch which would now clash with the passname getting added as
a switch in opt. On the bright side the pass name now matches the
DEBUG_TYPE name. Renamed "arm-prera-load-store-opt" to
"arm-repra-ldst-opt" as well for consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275661 91177308-0d34-0410-b5e6-96231b3b80d8
Remove remaining implicit conversions from MachineInstrBundleIterator to
MachineInstr* from the ARM backend. In most cases, I made them less attractive
by preferring MachineInstr& or using a ranged-based for loop.
Once all the backends are fixed I'll make the operator explicit so that this
doesn't bitrot back.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274920 91177308-0d34-0410-b5e6-96231b3b80d8
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272512 91177308-0d34-0410-b5e6-96231b3b80d8
If we have an LDM that uses only low registers and doesn't write to its base register:
ldm.w r0, {r1, r2, r3}
And that base register is dead after the LDM, then we can convert it to writeback form and use a narrow encoding:
ldm.n r0!, {r1, r2, r3}
Obviously, this introduces a new register write and so can cause WAW hazards, so I've enabled it only in minsize mode. This is a code size trick that ARM Compiler 5 ("armcc") does that we don't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272000 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the AddPristinesAndCSRs parameters from
addLiveIns()/addLiveOuts().
We need to respect pristine registers after prologue epilogue insertion,
Seeing that we got this wrong in at least two commits already, we should
rather pay the small price to query MachineFrameInfo for it.
There are three cases that did not set AddPristineAndCSRs to true even
after register allocation:
- ExecutionDepsFix: live-out registers are used as a hint that the
register is used soon. This is not true for pristine registers so
use the new addLiveOutsNoPristines() to maintain this behaviour.
- SystemZShortenInst: Not setting AddPristineAndCSRs to true looks like
a bug, should do the right thing automatically now.
- StackMapLivenessAnalysis: Not adding pristine registers looks like a
bug to me. Added a FIXME comment but maintain the current behaviour
as a change may need to get coordinated with GC runtimes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268336 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds the same checks that were added in r264593 to all
target-specific passes that run after register allocation.
Reviewers: qcolombet
Subscribers: jyknight, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18525
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265313 91177308-0d34-0410-b5e6-96231b3b80d8
Most of the time ARM has the CCR.UNALIGN_TRP bit set to false which
means that unaligned loads/stores do not trap and even extensive testing
will not catch these bugs. However the multi/double variants are not
affected by this bit and will still trap. In effect a more aggressive
load/store optimization will break existing (bad) code.
These bugs do not necessarily manifest in the broken code where the
misaligned pointer is formed but often later in perfectly legal code
where it is accessed. This means recompiling system libraries (which
have no alignment bugs) with a newer compiler will break existing
applications (with alignment bugs) that worked before.
So (under protest) I implemented this safe mode which limits the
formation of multi/double operations to cases that are not affected by
user code (stack operations like spills/reloads) or cases where the
normal operations trap anyway (floating point load/stores). It is
disabled by default.
Differential Revision: http://reviews.llvm.org/D17015
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262504 91177308-0d34-0410-b5e6-96231b3b80d8
Change MachineInstr API to prefer MachineInstr& over MachineInstr*
whenever the parameter is expected to be non-null. Slowly inching
toward being able to fix PR26753.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262149 91177308-0d34-0410-b5e6-96231b3b80d8
Change TargetInstrInfo API to take `MachineInstr&` instead of
`MachineInstr*` in the functions related to predicated instructions
(I'll try to come back later and get some of the rest). All of these
functions require non-null parameters already, so references are more
clear. As a bonus, this happens to factor away a host of implicit
iterator => pointer conversions.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261605 91177308-0d34-0410-b5e6-96231b3b80d8
In the discussion on http://reviews.llvm.org/D15730, Andy pointed out we had a utility function for merging MMO lists. Since it turned we actually had two copies and there's another review in progress (http://reviews.llvm.org/D15230) which needs the same, extract it into a utility function and clean up the interfaces to make it easier to use with a MachineInstBuilder.
I introduced a pair here to track size and allocation together. I think we should probably move in the direction of the MachineOperandsRef helper class, but I'm leaving that for further work. I want to get the poison state introduced before I make major changes to the interface.
Differential Revision: http://reviews.llvm.org/D15757
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256909 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
* avoid generating POP {LR} in Thumb1 epilogues
* combine MOV LR, Rx + BX LR -> BX Rx in a peephole optimization pass
* combine POP {LR} + B + BX LR -> POP {PC} on v5T+
Test cases by Ana Pazos
Differential Revision: http://reviews.llvm.org/D15707
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256523 91177308-0d34-0410-b5e6-96231b3b80d8
Re-apply of r241928 which had to be reverted because of the r241926
revert.
This commit factors out common code from MergeBaseUpdateLoadStore() and
MergeBaseUpdateLSMultiple() and introduces a new function
MergeBaseUpdateLSDouble() which merges adds/subs preceding/following a
strd/ldrd instruction into an strd/ldrd instruction with writeback where
possible.
Differential Revision: http://reviews.llvm.org/D10676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242743 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
This patch is quite boring overall, except for some uglyness in
ASMPrinter which has a getDataLayout function but has some clients
that use it without a Module (llmv-dsymutil, llvm-dwarfdump), so
some methods are taking a DataLayout as parameter.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11090
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242386 91177308-0d34-0410-b5e6-96231b3b80d8
The pass here was clearing kill flags on instructions which had
their sources killed in the instruction being combined. But
given that the new instruction is inserted after the existing ones,
any existing instructions with kill flags will lead to the verifier
complaining that we are reading an undefined physreg.
For example, what we had prior to this optimization is
t2STRi12 %R1, %SP, 12
t2STRi12 %R1<kill>, %SP, 16
t2STRi12 %R0<kill>, %SP, 8
and prior to this fix that would generate
t2STRi12 %R1<kill>, %SP, 16
t2STRDi8 %R0<kill>, %R1, %SP, 8
This is clearly incorrect as it didn't clear the kill flag on R1
used with offset 16 because there was no kill flag on the instruction
with offset 12.
After this change we clear the kill flag on the offset 16 instruction
because we know it will be used afterwards in the new instruction.
I haven't provided a test case. I have a small test, but even it is
very sensitive to register allocation order which isn't ideal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242359 91177308-0d34-0410-b5e6-96231b3b80d8
This commit factors out common code from MergeBaseUpdateLoadStore() and
MergeBaseUpdateLSMultiple() and introduces a new function
MergeBaseUpdateLSDouble() which merges adds/subs preceding/following a
strd/ldrd instruction into an strd/ldrd instruction with writeback where
possible.
Differential Revision: http://reviews.llvm.org/D10676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241928 91177308-0d34-0410-b5e6-96231b3b80d8
This improves the logic in several ways and is a preparation for
followup patches:
- First perform an analysis and create a list of merge candidates, then
transform. This simplifies the code in that you have don't have to
care to much anymore that you may be holding iterators to
MachineInstrs that get removed.
- Analyze/Transform basic blocks in reverse order. This allows to use
LivePhysRegs to find free registers instead of the RegisterScavenger.
The RegisterScavenger will become less precise in the future as it
relies on the deprecated kill-flags.
- Return the newly created node in MergeOps so there's no need to look
around in the schedule to find it.
- Rename some MBBI iterators to InsertBefore to make their role clear.
- General code cleanup.
Differential Revision: http://reviews.llvm.org/D10140
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241920 91177308-0d34-0410-b5e6-96231b3b80d8
When the store sequence being combined actually stores the base register, we
should not mark it as killed until the end.
rdar://21504262
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241003 91177308-0d34-0410-b5e6-96231b3b80d8
When UpdateBaseRegUses sees an instruction that defines the base
register it must stop, as the base register value it is updating is no
longer live. Ideally we would already have seen the register be killed
(which is already checked for), but the kill flags may be inaccurate
and we have to account for this.
Differential Revision: http://reviews.llvm.org/D10566
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240424 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240137 91177308-0d34-0410-b5e6-96231b3b80d8
The existing code would unnecessarily break LDRD/STRD apart with
non-adjacent registers, on thumb2 this is not necessary.
Ideally on thumb2 we shouldn't match for ldrd/strd pre-regalloc anymore
as there is not reason to set register hints anymore, changing that is
something for a future patch however.
Differential Revision: http://reviews.llvm.org/D9694
Recommiting after the revert in r238821, the buildbot still failed with
the patch removed so there seems to be another reason for the breakage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238935 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r238795, as it broke the Thumb2 self-hosting buildbot.
Since self-hosting issues with Clang are hard to investigate, I'm taking the
liberty to revert now, so we can investigate it offline.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238821 91177308-0d34-0410-b5e6-96231b3b80d8
The existing code would unnecessarily break LDRD/STRD apart with
non-adjacent registers, on thumb2 this is not necessary.
Ideally on thumb2 we shouldn't match for ldrd/strd pre-regalloc anymore
as there is not reason to set register hints anymore, changing that is
something for a future patch however.
Differential Revision: http://reviews.llvm.org/D9694
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238795 91177308-0d34-0410-b5e6-96231b3b80d8
MIOperands/ConstMIOperands are classes iterating over the MachineOperand
of a MachineInstr, however MachineInstr::mop_iterator does the same
thing.
I assume these two iterators exist to have a uniform interface to
iterate over the operands of a machine instruction bundle and a single
machine instruction. However in practice I find it more confusing to have 2
different iterator classes, so this patch transforms (nearly all) the
code to use mop_iterators.
The only exception being MIOperands::anlayzePhysReg() and
MIOperands::analyzeVirtReg() still needing an equivalent, I leave that
as an exercise for the next patch.
Differential Revision: http://reviews.llvm.org/D9932
This version is slightly modified from the proposed revision in that it
introduces MachineInstr::getOperandNo to avoid the extra counting
variable in the few loops that previously used MIOperands::getOperandNo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238539 91177308-0d34-0410-b5e6-96231b3b80d8
