The FPM is split at regular intervals across the MSF file, as the MS code
suggests. It turns out that the value of the interval is precisely the
block size. If the block size is 4096, then there are two Fpm pages every
4096 blocks.
So here we teach the PDBFile class to parse a split FPM, and also add more
options when dumping the FPM to display some additional information such
as orphaned pages (pages which the FPM says are allocated, but which
nothing appears to use), use after free pages (pages which the FPM says
are not allocated, but which are referenced by a stream), and multiple use
pages (pages which the FPM says are allocated but are used more than
once).
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D23022
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277388 91177308-0d34-0410-b5e6-96231b3b80d8
Block 1 and 2 of an MSF file are bit vectors that represent the
list of blocks allocated and free in the file. We had been using
these blocks to write stream data and other data, so we mark them
as the free page map now. We don't yet serialize these pages to
the disk, but at least we make a note of what it is, and avoid
writing random data to them.
Doing this also necessitated cleaning up some of the tests to be
more general and hardcode fewer values, which is nice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275629 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would read a PDB, then write some of it back out,
but write the directory, super block, and other pertinent metadata
back out unchanged. This generates incorrect PDBs since the amount
of data written was not always the same as the amount of data read.
This patch changes things to use the newly introduced `MsfBuilder`
class to write out a correct and accurate set of Msf metadata for
the data *actually* written, which opens up the door for adding and
removing type records, symbol records, and other types of data to
an existing PDB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275627 91177308-0d34-0410-b5e6-96231b3b80d8
This will be useful once we start adding the ability to dump type
records and symbol records, since it will allow us to generate
mergeable information instead of information that specifies an
entire file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275109 91177308-0d34-0410-b5e6-96231b3b80d8
We emitted debug info for globals/functions as if they all had external
linkage. Instead, emit local symbol records when appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274676 91177308-0d34-0410-b5e6-96231b3b80d8
Somehow all the functionality to write PDB files got removed,
probably accidentally when uploading the patch perhaps the wrong
one got uploaded. This re-adds all the code, as well as the
corresponding test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274248 91177308-0d34-0410-b5e6-96231b3b80d8
The basic structure is that once a list record goes over 64K, the last
subrecord of the list is an LF_INDEX record that refers to the next
record. Because the type record graph must be toplogically sorted, this
means we have to emit them in reverse order. We build the type record in
order of declaration, so this means that if we don't want extra copies,
we need to detect when we were about to split a record, and leave space
for a continuation subrecord that will point to the eventual split
top-level record.
Also adds dumping support for these records.
Next we should make sure that large method overload lists work properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273294 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 879139e1c6577b09df52de56a6bab856a19ed185.
This was committed accidentally when I blindly typed git svn
dcommit instead of the command to generate a patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272693 91177308-0d34-0410-b5e6-96231b3b80d8
This is the simplest possible patch to get some kind of YAML
output. All it dumps is the MSF header fields so that in
theory an empty MSF file could be reconstructed.
Reviewed By: ruiu, majnemer
Differential Revision: http://reviews.llvm.org/D20971
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271939 91177308-0d34-0410-b5e6-96231b3b80d8
When printing line information and file checksums, we were printing
the file offset field from the struct header. This teaches
llvm-pdbdump how to turn those numbers into the filename. In the
case of file checksums, this is done by looking in the global
string table. In the case of line contributions, this is done
by indexing into the file names buffer of the DBI stream. Why
they use a different technique I don't know.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271630 91177308-0d34-0410-b5e6-96231b3b80d8
To facilitate this, a couple of changes had to be made:
1. `ModuleSubstream` got moved from `DebugInfo/PDB` to
`DebugInfo/CodeView`, and various codeview related types are defined
there. It turns out `DebugInfo/CodeView/Line.h` already defines many of
these structures, but this is really old code that is not endian aware,
doesn't interact well with `StreamInterface` and not very helpful for
getting stuff out of a PDB. Eventually we should migrate the old readobj
`COFFDumper` code to these new structures, or at least merge their
functionality somehow.
2. A `ModuleSubstream` visitor is introduced. Depending on where your
module substream array comes from, different subsets of record types can
be expected. We are already hand parsing these substream arrays in many
places especially in `COFFDumper.cpp`. In the future we can migrate these
paths to the visitor as well, which should reduce a lot of code in
`COFFDumper.cpp`.
Differential Revision: http://reviews.llvm.org/D20936
Reviewed By: ruiu, majnemer
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271621 91177308-0d34-0410-b5e6-96231b3b80d8
This first pass only splits apart the records and dumps the line
info kinds and binary data. Subsequent patches will parse out
the binary data into more useful information and dump it in
detail.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271576 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike other sections that can grow to any size, the COFF section header
stream has maximum length because each record is fixed size and the COFF
file format limits the maximum number of sections. So I decided to not
create a specific stream class for it. Instead, I added a member function
to DbiStream class which returns a vector of COFF headers.
Differential Revision: http://reviews.llvm.org/D20717
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271557 91177308-0d34-0410-b5e6-96231b3b80d8
name_ids() did not return all IDs but only the first NameCount items.
The number of non-zero entries in IDs vector is NameCount, but it
does not mean that all non-zero entries are at the beginning of IDs
vector.
Differential Revision: http://reviews.llvm.org/D20611
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270656 91177308-0d34-0410-b5e6-96231b3b80d8
Try to figure out what each stream is, and dump its name.
This gives us a better picture of what streams we still don't
understand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270653 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for parsing and dumping the following
symbol types:
S_LPROCREF
S_ENVBLOCK
S_COMPILE2
S_REGISTER
S_COFFGROUP
S_SECTION
S_THUNK32
S_TRAMPOLINE
As of this patch, the test PDB files no longer have any unknown
symbol types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270628 91177308-0d34-0410-b5e6-96231b3b80d8
When dumping huge PDB files, too many of the options were grouped
together so you would get neverending spew of output. This patch
introduces more granular display options so you can only dump the
fields you actually care about.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270607 91177308-0d34-0410-b5e6-96231b3b80d8
This makes use of the newly introduced `CVSymbolVisitor` to dump details
of each type of symbol record in the symbol streams. Future patches will
bring this visitor based dumping to the publics stream, as well as
creating a `SymbolDumpDelegate` to print more information about
relocations etc.
Differential Revision: http://reviews.llvm.org/D20545
Reviewed By: ruiu
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270585 91177308-0d34-0410-b5e6-96231b3b80d8
DBI stream contains a stream number of the symbol record stream.
Symbol record streams is an array of length-type-value members.
Each member represents one symbol.
Publics stream contains offsets to the symbol record stream.
This patch is to print out all symbols that are referenced by
the publics stream.
Note that even with this patch, llvm-pdbdump cannot dump all the
information in a publics stream since it contains more information
than symbol names. I'll improve it in followup patches.
Differential Revision: http://reviews.llvm.org/D20480
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270262 91177308-0d34-0410-b5e6-96231b3b80d8
I don't yet fully understand the meaning of these data strcutures,
but at least it seems that their sizes and types are correct.
With this change, we can read publics streams till end.
Differential Revision: http://reviews.llvm.org/D20343
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269861 91177308-0d34-0410-b5e6-96231b3b80d8
Publics stream seems to contain information as to public symbols.
It actually contains a serialized hash table along with fixed-sized
headers. This patch is not complete. It scans only till the end of
the stream and dump the header information. I'll write code to
de-serialize the hash table later.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269484 91177308-0d34-0410-b5e6-96231b3b80d8
