This enables the suggestions of other mnemonics when invalid ones are
specified.
Review: Ulrich Weigand
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308280 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the new 128-bit vector float instructions of z14.
Note that these instructions actually only operate on the f128 type,
since only each 128-bit vector register can hold only one 128-bit
float value. However, this is still preferable to the legacy 128-bit
float instructions, since those operate on pairs of floating-point
registers (so we can hold at most 8 values in registers), while the
new instructions use single vector registers (so we hold up to 32
value in registers).
Adding support includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions. This includes allocating the f128
type now to the VR128BitRegClass instead of FP128BitRegClass.
- Scheduler description support for the instructions.
Note that for a small number of operations, we have no new vector
instructions (like integer <-> 128-bit float conversions), and so
we use the legacy instruction and then reformat the operand
(i.e. copy between a pair of floating-point registers and a
vector register).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308196 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the new 32-bit vector float instructions of z14.
This includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions, including new LLVM intrinsics.
- Scheduler description support for the instructions.
- Update to the vector cost function calculations.
In general, CodeGen support for the new v4f32 instructions closely
matches support for the existing v2f64 instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308195 91177308-0d34-0410-b5e6-96231b3b80d8
This patch series adds support for the IBM z14 processor. This part includes:
- Basic support for the new processor and its features.
- Support for new instructions (except vector 32-bit float and 128-bit float).
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of z14 as host processor.
Support for the new 32-bit vector float and 128-bit vector float
instructions is provided by separate patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308194 91177308-0d34-0410-b5e6-96231b3b80d8
This adds all remaining instructions that were still missing, mostly
privileged and semi-privileged system-level instructions. These are
provided for use with the assembler and disassembler only.
This brings the LLVM assembler / disassembler to parity with the
GNU binutils tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306876 91177308-0d34-0410-b5e6-96231b3b80d8
There are a few instructions provided by the high-word facility (z196)
that we cannot easily exploit for code generation. This patch at least
adds those missing instructions for the assembler and disassembler.
This means that now all nonprivileged instructions up to z13 are
supported by the LLVM assembler / disassembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306821 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembler / disassembler support for the decimal
floating-point instructions. Since LLVM does not yet have
support for decimal float types, these cannot be used for
codegen at this point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304203 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembler / disassembler support for the hexadecimal
floating-point instructions. Since the Linux ABI does not use
any hex float data types, these are not useful for codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304202 91177308-0d34-0410-b5e6-96231b3b80d8
A few instructions that are actually correctly supported in the
assembler and disassembler did not have any tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304200 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a few missing instructions for the assembler and
disassembler. Those should be the last missing general-
purpose (Chapter 7) instructions for the z10 ISA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302667 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the remaining general arithmetic instructions
for assembler / disassembler use. Most of these are not
useful for codegen; a few might be, and those are listed
in the README.txt for future improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302665 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the set of character-set translate and convert instructions
for assembler / disassembler use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302644 91177308-0d34-0410-b5e6-96231b3b80d8
The assembler and disassmebler test cases started out formatted and
sorted in a particular way, but this got lost over time as patches
were added. Reformat them again. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302642 91177308-0d34-0410-b5e6-96231b3b80d8
Add assembler support for all atomic instructions that weren't already
supported. Some of those could be used to implement codegen for 128-bit
atomic operations, but this isn't done here yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288526 91177308-0d34-0410-b5e6-96231b3b80d8
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288525 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembler support for the instructions provided by the
execution-hint facility (NIAI and BP(R)P). This required adding
support for the new relocation types for 12-bit and 24-bit PC-
relative offsets used by the BP(R)P instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288031 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds assembler support for the remaining branch instructions:
the non-relative branch on count variants, and all variants of branch
on index.
The only one of those that can be readily exploited for code generation
is BRCTH (branch on count using a high 32-bit register as count). Do
use it, however, it is necessary to also introduce a hew CHIMux pseudo
to allow comparisons of a 32-bit value agains a short immediate to go
into a high register as well (implemented via CHI/CIH).
This causes a bit of codegen changes overall, but those have proven to
be neutral (or even beneficial) in performance measurements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288029 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288028 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the compare logical and trap (memory)
instructions that were added as part of the miscellaneous
instruction extensions feature with zEC12.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286587 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the LZRF/LZRG/LLZRGF instructions that were
added on z13, and uses them for code generation were appropriate.
SystemZDAGToDAGISel::tryRISBGZero is updated again to prefer LLZRGF
over RISBG where both would be possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286586 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the 31-to-64-bit zero extension instructions
LLGT and LLGTR and uses them for code generation where appropriate.
Since this operation can also be performed via RISBG, we have to
update SystemZDAGToDAGISel::tryRISBGZero so that we prefer LLGT
over RISBG in case both are possible. The patch includes some
simplification to the tryRISBGZero code; this is not intended
to cause any (further) functional change in codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286585 91177308-0d34-0410-b5e6-96231b3b80d8
This completes assembler / disassembler support for all BFP
instructions provided by the floating-point extensions facility.
The instructions added here are not currently used for codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286285 91177308-0d34-0410-b5e6-96231b3b80d8
Add several instructions that operate on the program mask
or the addressing mode. These are not really needed for
code generation under Linux, but are provided for completeness
for the assembler/disassembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286284 91177308-0d34-0410-b5e6-96231b3b80d8
Add the 16 access registers as LLVM registers. This allows removing
a lot of special cases in the assembler and disassembler where we
were handling access registers; this can all just use the generic
register code now.
Also add a bunch of instructions to operate on access registers,
for assembler/disassembler use only. No change in code generation
intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286283 91177308-0d34-0410-b5e6-96231b3b80d8
Rework patterns for branches, call & return instructions,
compare-and-branch, compare-and-trap, and conditional move
instructions.
In particular, simplify creation of patterns for the extended
opcodes of instructions that take a CC mask.
Also, use semantical instruction classes for all the instructions
instead of open-coding them in SystemZInstrInfo.td.
Adds a couple of the basic branch instructions (that are unused
for codegen) for the assembler/disassembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286263 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements two changes:
- Move processor feature definition into a new file SystemZFeatures.td,
and provide explicit lists of supported and unsupported features for
each level of the z/Architecture. This allows specifying unsupported
features in the scheduler definition files for each processor.
- Add optional aliases for the -mcpu processor names according to the
level of the z/Architecture, for compatibility with other compilers
on the platform. The supported aliases are:
-mcpu=arch8 equals -mcpu=z10
-mcpu=arch9 equals -mcpu=z196
-mcpu=arch10 equals -mcpu=zEC12
-mcpu=arch11 equals -mcpu=z13
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285577 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, when using an instruction that is not supported on the
currently selected architecture, the LLVM assembler is likely to
diagnose an "invalid operand" instead of a "missing feature".
This is because many operands require a custom parser in order to
be processed correctly, and if an instruction is not available
according to the current feature set, the generated parser code
will also not detect the associated custom operand parsers.
Fixed by temporarily enabling all features while parsing operands.
The missing features will then be correctly detected when actually
parsing the instruction itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285575 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM currently treats the first operand of MVCK as if it were a
regular base+index+displacement address. However, it is in fact
a base+displacement combined with a length register field.
While the two might look syntactically similar, there are two
semantic differences:
- %r0 is a valid length register, even though it cannot be used
as an index register.
- In an expression with just a single register like 0(%rX), the
register is treated as base with normal addresses, while it is
treated as the length register (with an empty base) for MVCK.
Fixed by adding a new operand parser class BDRAddr and reworking
the assembler parser to distinguish between address + length
register operands and regular addresses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285574 91177308-0d34-0410-b5e6-96231b3b80d8
Most z13 vector instructions have a base form where the data type of
the operation (whether to consider the vector to be 16 bytes, 8
halfwords, 4 words, or 2 doublewords) is encoded into a mask field,
and then a set of extended mnemonics where the mask field is not
present but the data type is encoded into the mnemonic name.
Currently, LLVM only supports the type-specific forms (since those
are really the ones needed for code generation), but not the base
type-generic forms.
To complete the assembler support and make it fully compatible with
the GNU assembler, this commit adds assembler aliases for all the
base forms of the various vector instructions.
It also adds two more alias forms that are documented in the PoP:
VFPSO/VFPSODB/WFPSODB -- generic form of VFLCDB etc.
VNOT -- special variant of VNO
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284586 91177308-0d34-0410-b5e6-96231b3b80d8
The vfee[bhf], vfene[bhf], and vistr[bhf] assembler mnemonics are
documented in the Principles of Operation to have an optional last
operand to encode arbitrary values in a mask field.
This commit adds support for those optional operands, and cleans up
the patterns to generate vector string instruction as bit. No change
to code generation intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284585 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add support for the .insn directive.
.insn is an s390 specific directive that allows encoding of an instruction
instead of using a mnemonic. The motivating case is some code in node.js that
requires support for the .insn directive.
Reviewers: koriakin, uweigand
Subscribers: koriakin, llvm-commits
Differential Revision: https://reviews.llvm.org/D21809
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278012 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add instruction formats E, RSI, SSd, SSE, and SSF.
Added BRXH, BRXLE, PR, MVCK, STRAG, and ECTG instructions to test out
those formats.
Reviewers: uweigand
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23179
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277822 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Add support for the z13 instructions LOCHI and LOCGHI which
conditionally load immediate values. Add target instruction info hooks so
that if conversion will allow predication of LHI/LGHI.
Author: RolandF
Reviewers: uweigand
Subscribers: zhanjunl
Commiting on behalf of Roland.
Differential Revision: http://reviews.llvm.org/D22117
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275086 91177308-0d34-0410-b5e6-96231b3b80d8
These are not used by CodeGen yet - ISD combiners creating the new node
will come in subsequent patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274108 91177308-0d34-0410-b5e6-96231b3b80d8
Support and generate Compare and Traps like CRT, CIT, etc.
Support Trap as legal DAG opcodes and generate "j .+2" for them by default.
Add support for Conditional Traps and use the If Converter to convert them into
the corresponding compare and trap opcodes.
Differential Revision: http://reviews.llvm.org/D21155
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272419 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: On Linux, /usr/include/bits/byteswap-16.h defines __byteswap_16(x) as an inlined LRVH (Load Reversed Half-word) instruction. The SystemZ back-end did not support this opcode and the inlined assembly would cause a fatal error.
Reviewers: bryanpkc, uweigand
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18732
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269688 91177308-0d34-0410-b5e6-96231b3b80d8
Added support for extended mnemonics for the following branch instructions and
load/store-on-condition opcodes:
BR, LOCR, LOCGR, LOC, LOCG, STOC, STOCG
Phabricator: http://reviews.llvm.org/D19729
Committing on behalf of Zhan Liau
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269106 91177308-0d34-0410-b5e6-96231b3b80d8
This adds MC support for fused compare + indirect branch instructions,
ie. CRB, CGRB, CLRB, CLGRB, CIB, CGIB, CLIB, CLGIB. They aren't actually
generated yet -- this is preparation for their use for conditional
returns in the next iteration of D17339.
Author: koriakin
Differential Revision: http://reviews.llvm.org/D18742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265296 91177308-0d34-0410-b5e6-96231b3b80d8
For compatability with GAS, nop and nopr are recognized as alises for
bc and bcr, respectively. A mask of 0 turns these instructions
effectively into no-operations.
Reviewed by Ulrich Weigand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264875 91177308-0d34-0410-b5e6-96231b3b80d8
The SystemZ linkers provide an optimization to transform a general-
or local-dynamic TLS sequence into an initial-exec sequence if possible.
Do do that, the compiler generates a function call to __tls_get_offset,
which is a brasl instruction annotated with *two* relocations:
- a R_390_PLT32DBL to install __tls_get_offset as branch target
- a R_390_TLS_GDCALL / R_390_TLS_LDCALL to inform the linker that
the TLS optimization should be performed if possible
If the optimization is performed, the brasl is replaced by an ld load
instruction.
However, *both* relocs are processed independently by the linker.
Therefore it is crucial that the R_390_PLT32DBL is processed *first*
(installing the branch target for the brasl) and the R_390_TLS_GDCALL
is processed *second* (replacing the whole brasl with an ld).
If the relocs are swapped, the linker will first replace the brasl
with an ld, and *then* install the __tls_get_offset branch target
offset. Since ld has a different layout than brasl, this may even
result in a completely different (or invalid) instruction; in any
case, the resulting code is corrupted.
Unfortunately, the way the MC common code sorts relocations causes
these two to *always* end up the wrong way around, resulting in
wrong code generation by the linker and crashes.
This patch overrides the sortRelocs routine to detect this particular
pair of relocs and enforce the required order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255787 91177308-0d34-0410-b5e6-96231b3b80d8
New instructions using floating point registers have been added, to check
that AsmParser can deal with fp regs in vector instructions.
This tests r249810.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@250023 91177308-0d34-0410-b5e6-96231b3b80d8
Jonas Paulsson