Summary:
Currently the DbgValueHistorymap only keeps track of clobbered registers
for the last debug value that it has encountered. This could lead to
preceding register-described debug values living on longer in the
location lists than they should. See PR40283 for an example. This
patch does not introduce tracking of multiple registers, but changes
the DbgValueHistoryMap structure to allow for that in a follow-up
patch. This patch is not NFC, as it at least fixes two bugs in
DwarfDebug (both are covered in the new clobbered-fragments.mir test):
* If a debug value was clobbered (its End pointer set), the value would
still be added to OpenRanges, meaning that the succeeding location list
entries could potentially contain stale values.
* If a debug value was clobbered, and there were non-overlapping
fragments that were still live after the clobbering, DwarfDebug would
not create a location list entry starting directly after the
clobbering instruction. This meant that the location list could have
a gap until the next debug value for the variable was encountered.
Before this patch, the history map was represented by <Begin, End>
pairs, where a new pair was created for each new debug value. When
dealing with partially overlapping register-described debug values, such
as in the following example:
DBG_VALUE $reg2, $noreg, !1, !DIExpression(DW_OP_LLVM_fragment, 32, 32)
[...]
DBG_VALUE $reg3, $noreg, !1, !DIExpression(DW_OP_LLVM_fragment, 64, 32)
[...]
$reg2 = insn1
[...]
$reg3 = insn2
the history map would then contain the entries `[<DV1, insn1>, [<DV2, insn2>]`.
This would leave it up to the users of the map to be aware of
the relative order of the instructions, which e.g. could make
DwarfDebug::buildLocationList() needlessly complex. Instead, this patch
makes the history map structure monotonically increasing by dropping the
End pointer, and replacing that with explicit clobbering entries in the
vector. Each debug value has an "end index", which if set, points to the
entry in the vector that ends the debug value. The ending entry can
either be an overlapping debug value, or an instruction which clobbers
the register that the debug value is described by. The ending entry's
instruction can thus either be excluded or included in the debug value's
range. If the end index is not set, the debug value that the entry
introduces is valid until the end of the function.
Changes to test cases:
* DebugInfo/X86/pieces-3.ll: The range of the first DBG_VALUE, which
describes that the fragment (0, 64) is located in RDI, was
incorrectly ended by the clobbering of RAX, which the second
(non-overlapping) DBG_VALUE was described by. With this patch we
get a second entry that only describes RDI after that clobbering.
* DebugInfo/ARM/partial-subreg.ll: This test seems to indiciate a bug
in LiveDebugValues that is caused by it not being aware of fragments.
I have added some comments in the test case about that. Also, before
this patch DwarfDebug would incorrectly include a register-described
debug value from a preceding block in a location list entry.
Reviewers: aprantl, probinson, dblaikie, rnk, bjope
Reviewed By: aprantl
Subscribers: javed.absar, kristof.beyls, jdoerfert, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D59941
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358072 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This avoids needing an isel pattern for each condition code. And it removes translation switches for converting between Jcc instructions and condition codes.
Now the printer, encoder and disassembler take care of converting the immediate. We use InstAliases to handle the assembly matching. But we print using the asm string in the instruction definition. The instruction itself is marked IsCodeGenOnly=1 to hide it from the assembly parser.
Reviewers: spatel, lebedev.ri, courbet, gchatelet, RKSimon
Reviewed By: RKSimon
Subscribers: MatzeB, qcolombet, eraman, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60228
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357802 91177308-0d34-0410-b5e6-96231b3b80d8
The 2nd loop calculates spill costs but reports free registers as cost
0 anyway, so there is little benefit from having a separate early
loop.
Surprisingly this is not NFC, as many register are marked regDisabled
so the first loop often picks up later registers unnecessarily instead
of the first one available in the allocation order...
Patch by Matthias Braun
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356499 91177308-0d34-0410-b5e6-96231b3b80d8
Moving subprogram specific flags into DISPFlags makes IR code more readable.
In addition, we provide free space in DIFlags for other
'non-subprogram-specific' debug info flags.
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D59288
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356454 91177308-0d34-0410-b5e6-96231b3b80d8
When using full LTO it is possible that template function definition DIE
is bound to one compilation unit and it's declaration to another. We should
add function declaration attributes on behalf of its owner CU otherwise
we may end up with malformed file identifier in function declaration
DW_AT_decl_file attribute.
Differential revision: https://reviews.llvm.org/D58538
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354978 91177308-0d34-0410-b5e6-96231b3b80d8
In this patch SelectionDAG tries to salvage any dbg.values that are going to be
dropped, in case they can be recovered from Values in the current BB. It also
strengthens SelectionDAGs handling of dangling debug data, so that dbg.values
are *always* emitted (as Undef or otherwise) instead of dangling forever.
The motivation behind this patch exists in the new test case: a memory address
(here a bitcast and GEP) exist in one basic block, and a dbg.value referring to
the address is left in the 'next' block. The base pointer is live across all
basic blocks. In current llvm trunk the dbg.value cannot be encoded, and it
isn't even emitted as an Undef DBG_VALUE.
The change is simply: if we're definitely going to drop a dbg.value, repeatedly
apply salvageDebugInfo to its operand until either we find something that can
be encoded, or we can't salvage any further in which case we produce an Undef
DBG_VALUE. To know when we're "definitely going to drop a dbg.value",
SelectionDAG signals SelectionDAGBuilder when all IR instructions have been
encoded to force salvaging. This ensures that any dbg.value that's dangling
after DAG creation will have a corresponding DBG_VALUE encoded.
Differential Revision: https://reviews.llvm.org/D57694
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353954 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAGBuilder has special handling for dbg.value intrinsics that are
understood to define the location of function parameters on entry to the
function. To enable this, we avoid recording a dbg.value as a virtual register
reference if it might be such a parameter, so that it later hits
EmitFuncArgumentDbgValue.
This patch reduces the set of circumstances where we avoid recording a
dbg.value as a virtual register reference, to allow more "normal" variables
to be recorded that way. We now only bypass for potential parameters if:
* The dbg.value operand is an Argument,
* The Variable is a parameter, and
* The Variable is not inlined.
meaning it's very likely that the dbg.value is a function-entry parameter
location.
Differential Revision: https://reviews.llvm.org/D57584
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353948 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a follow-up to D57510. This patch stops DebugHandlerBase from
changing the starting label for the first non-overlapping,
register-described parameter DBG_VALUEs to the beginning of the
function. That code did not consider what defined the registers, which
could result in the ranges for the debug values starting before their
defining instructions. We currently do not emit debug values for
constant values directly at the start of the function, so this code is
still useful for such values, but my intention is to remove the code
from DebugHandlerBase completely when we get there. One reason for
removing it is that the code violates the history map's ranges, which I
think can make it quite confusing when troubleshooting.
In D57510, PrologEpilogInserter was amended so that parameter DBG_VALUEs
now are kept at the start of the entry block, even after emission of
prologue code. That was done to reduce the degradation of debug
completeness from this patch. PR40638 is another example, where the
lexical-scope trimming that LDV does, in combination with scheduling,
results in instructions after the prologue being left without locations.
There might be other cases where the DBG_VALUEs are pushed further down,
for which the DebugHandlerBase code may be helpful, but as it now quite
often result in incorrect locations, even after the prologue, it seems
better to remove that code, and try to work our way up with accurate
locations.
In the long run we should maybe not aim to provide accurate locations
inside the prologue. Some single location descriptions, at least those
referring to stack values, generate inaccurate values inside the
epilogue, so we maybe should not aim to achieve accuracy for location
lists. However, it seems that we now emit line number programs that can
result in GDB and LLDB stopping inside the prologue when doing line
number stepping into functions. See PR40188 for more information.
A summary of some of the changed test cases is available in PR40188#c2.
Reviewers: aprantl, dblaikie, rnk, jmorse
Reviewed By: aprantl
Subscribers: jdoerfert, jholewinski, jvesely, javed.absar, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D57511
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353928 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a preparatory change for removing the code from
DebugHandlerBase::beginFunction() which changes the starting label for
the first non-overlapping DBG_VALUEs of parameters to the beginning of
the function. It does that to be able to show parameters when entering a
function. However, that code does not consider what defines the values,
which can result in the ranges for the debug values starting before
their defining instructions. That code is removed in a follow-up patch.
When prologue code is inserted, it leads to DBG_VALUEs that start
directly in the entry block being moved down after the prologue
instructions. This patch fixes that by stashing away DBG_VALUEs for
parameters before emitting the prologue, and then reinserts them at the
start of the block. This assumes that there is no target that somehow
clobbers parameter registers in the frame setup; there is no such case
in the lit tests at least.
See PR40188 for more information.
Reviewers: aprantl, dblaikie, rnk, jmorse
Reviewed By: aprantl
Subscribers: bjope, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D57510
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353823 91177308-0d34-0410-b5e6-96231b3b80d8
This configuration (due to r349207) was intended not to emit any DWO CU,
but a degenerate CU was still being emitted - containing a header and a
DW_TAG_compile_unit with no attributes.
Under that situation, emit nothing to the .dwo file. (since this is a
dynamic property of the input the .dwo file is still emitted, just with
nothing in it (so a valid, but empty, ELF file) - if some other CU
didn't satisfy this criteria, its DWO CU would still go there, etc)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353771 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch fixes PR40587.
When a dbg.value instrinsic is emitted to the DAG
by using EmitFuncArgumentDbgValue the resulting
DBG_VALUE is hoisted to the beginning of the entry
block. I think the idea is to be able to locate
a formal argument already from the start of the
function.
However, EmitFuncArgumentDbgValue only checked that
the value that was used to describe a variable was
originating from a function parameter, not that the
variable itself actually was an argument to the
function. So when for example assigning a local
variable "local" the value from an argument "a",
the assocated DBG_VALUE instruction would be hoisted
to the beginning of the function, even if the scope
for "local" started somewhere else (or if "local"
was mapped to other values earlier in the function).
This patch adds some logic to EmitFuncArgumentDbgValue
to check that the variable being described actually
is an argument to the function. And that the dbg.value
being lowered already is in the entry block. Otherwise
we bail out, and the dbg.value will be handled as an
ordinary dbg.value (not as a "FuncArgumentDbgValue").
A tricky situation is when both the variable and
the value is related to function arguments, but not
neccessarily the same argument. We make sure that we
do not describe the same argument more than once as
a "FuncArgumentDbgValue". This solution works as long
as opt has injected a "first" dbg.value that corresponds
to the formal argument at the function entry.
Reviewers: jmorse, aprantl
Subscribers: jyknight, hiraditya, fedor.sergeev, dstenb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57702
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353735 91177308-0d34-0410-b5e6-96231b3b80d8
A FrameIndex should be valid throughout a block regardless of what instructions
get selected in that block -- therefore we shouldn't harness dbg.values that
refer to FrameIndexes to an SDNode. There are numerous codegen reasons why
an SDNode never appears or doesn't become a location that a DBG_VALUE can
refer to. None of them actually affect the variable location.
Therefore, before any other tests to encode dbg_values in a SelectionDAG,
identify FrameIndex operands and encode them unattached to any SDNode.
Differential Revision: https://reviews.llvm.org/D57328
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352467 91177308-0d34-0410-b5e6-96231b3b80d8
This patch improves the placement of DBG_VALUEs when by SelectionDAG, which
as documented in PR40427 can go very wrong. At the core of this is
ProcessSourceNode, which assumes the last instruction in a BB is the start
of the last processed IR instruction, which isn't always true.
Instead, use a helper function to call InstrEmitter::EmitNode, that records
before-and-after iterators and determines the first of any new instruction
created during emission. This is passed to ProcessSourceNode, which can
then make more elightened decisions about ordering for DBG_VALUE placement.
Differential revision: https://reviews.llvm.org/D57163
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352350 91177308-0d34-0410-b5e6-96231b3b80d8
If bottom of block BB has only one successor OldTop, in most cases it is profitable to move it before OldTop, except the following case:
-->OldTop<-
| . |
| . |
| . |
---Pred |
| |
BB-----
Move BB before OldTop can't reduce the number of taken branches, this patch detects this case and prevent the moving.
Differential Revision: https://reviews.llvm.org/D57067
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@352236 91177308-0d34-0410-b5e6-96231b3b80d8
dbg.value intrinsics can appear in blocks where their operand is not used,
meaning the operand never receives an SDNode, and thus no DBG_VALUE will
be created. Get around this by looking to see whether the operand has already
been allocated a virtual register. This allows dbg.values of Phi node and
Values that are used across basic blocks to successfully be translated into
DBG_VALUEs.
Differential Revision: https://reviews.llvm.org/D56678
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351358 91177308-0d34-0410-b5e6-96231b3b80d8
compiler identification lines in test-cases.
(Doing so only because it's then easier to search for references which
are actually important and need fixing.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351200 91177308-0d34-0410-b5e6-96231b3b80d8
Part of the effort to refactoring frame pointer code generation. We used
to use two function attributes "no-frame-pointer-elim" and
"no-frame-pointer-elim-non-leaf" to represent three kinds of frame
pointer usage: (all) frames use frame pointer, (non-leaf) frames use
frame pointer, (none) frame use frame pointer. This CL makes the idea
explicit by using only one enum function attribute "frame-pointer"
Option "-frame-pointer=" replaces "-disable-fp-elim" for tools such as
llc.
"no-frame-pointer-elim" and "no-frame-pointer-elim-non-leaf" are still
supported for easy migration to "frame-pointer".
tests are mostly updated with
// replace command line args ‘-disable-fp-elim=false’ with ‘-frame-pointer=none’
grep -iIrnl '\-disable-fp-elim=false' * | xargs sed -i '' -e "s/-disable-fp-elim=false/-frame-pointer=none/g"
// replace command line args ‘-disable-fp-elim’ with ‘-frame-pointer=all’
grep -iIrnl '\-disable-fp-elim' * | xargs sed -i '' -e "s/-disable-fp-elim/-frame-pointer=all/g"
Patch by Yuanfang Chen (tabloid.adroit)!
Differential Revision: https://reviews.llvm.org/D56351
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351049 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fixes PR39710. In that case we emitted a location list looking like
this:
.Ldebug_loc0:
.quad .Lfunc_begin0-.Lfunc_begin0
.quad .Lfunc_begin0-.Lfunc_begin0
.short 1 # Loc expr size
.byte 85 # DW_OP_reg5
.quad .Lfunc_begin0-.Lfunc_begin0
.quad .Lfunc_end0-.Lfunc_begin0
.short 1 # Loc expr size
.byte 85 # super-register DW_OP_reg5
.quad 0
.quad 0
As seen, the first entry's beginning and ending addresses evalute to 0,
which meant that the entry inadvertently became an "end of list" entry,
resulting in the location list ending sooner than expected.
To fix this, omit all entries with empty ranges. Location list entries
with empty ranges do not have any effect, as specified by DWARF, so we
might as well drop them:
"A location list entry (but not a base address selection or end of list
entry) whose beginning and ending addresses are equal has no effect
because the size of the range covered by such an entry is zero."
Reviewers: davide, aprantl, dblaikie
Reviewed By: aprantl
Subscribers: javed.absar, JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D55919
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@350698 91177308-0d34-0410-b5e6-96231b3b80d8
These patches have broken almost all buildbots on test
DebugInfo/X86/addr_comments.ll. Reverting to green.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@350052 91177308-0d34-0410-b5e6-96231b3b80d8
When deciding lazily whether a CU would be split or non-split I
accidentally dropped some handling for the line tables comp_dir (by
doing it lazily it was too late to be handled properly by the MC line
table code).
Move that bit of the code back to the non-lazy place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@349819 91177308-0d34-0410-b5e6-96231b3b80d8
Mucking about simplifying a test case ( https://reviews.llvm.org/D55261 ) I stumbled across something I've hit before - that LLVM's (GCC's does too, FWIW) assembly output includes a hardcode length for a DWARF unit in its header. Instead we could emit a label difference - making the assembly easier to read/edit (though potentially at a slight (I haven't tried to observe it) performance cost of delaying/sinking the length computation into the MC layer).
Fix: Predicated all the changes (including creating the labels, even if they aren't used/needed) behind the NVPTX useSectionsAsReferences, avoiding emitting labels in NVPTX where ptxas can't parse them.
Reviewers: JDevlieghere, probinson, ABataev
Differential Revision: https://reviews.llvm.org/D55281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@349430 91177308-0d34-0410-b5e6-96231b3b80d8
In ThinLTO many split CUs may be effectively empty because of the lack
of support for cross-unit references in split DWARF.
Using a split unit in those cases is just a waste/overhead - and turned
out to be one contributor to a significant symbolizer performance issue
when global variable debug info was being imported (see r348416 for the
primary fix) due to symbolizers seeing CUs with no ranges, assuming
there might still be addresses covered and walking into the split CU to
see if there are any ranges (when that split CU was in a DWP file, that
meant loading the DWP and its index, the index was extra large because
of all these fractured/empty CUs... and so was very expensive to load).
(the 3rd fix which will follow, is to assume that a CU with no ranges is
empty rather than merely missing its CU level range data - and to not
walk into its DIEs (split or otherwise) in search of address information
that is generally not present)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@349207 91177308-0d34-0410-b5e6-96231b3b80d8
Temporarily reverts commit r348806 due to strange asm compilation issues in certain modes (combination of asan+cuda+other things). Will provide repro soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348898 91177308-0d34-0410-b5e6-96231b3b80d8
Mucking about simplifying a test case ( https://reviews.llvm.org/D55261 ) I stumbled across something I've hit before - that LLVM's (GCC's does too, FWIW) assembly output includes a hardcode length for a DWARF unit in its header. Instead we could emit a label difference - making the assembly easier to read/edit (though potentially at a slight (I haven't tried to observe it) performance cost of delaying/sinking the length computation into the MC layer).
Reviewers: JDevlieghere, probinson, ABataev
Differential Revision: https://reviews.llvm.org/D55281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348806 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, dbg.value's of "nullptr" are dropped when entering a SelectionDAG --
apparently just because of an oversight when recognising Values that are
constant (see PR39787). This patch adds ConstantPointerNull to the list of
constants that can be turned into DBG_VALUEs.
The matter of what bit-value a null pointer constant in LLVM has was raised
in this mailing list thread:
http://lists.llvm.org/pipermail/llvm-dev/2018-December/128234.html
Where it transpires LLVM relies on (IR) null pointers being zero valued,
thus I've baked this assumption into the patch.
Differential Revision: https://reviews.llvm.org/D55227
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348753 91177308-0d34-0410-b5e6-96231b3b80d8
This is a fix for PR39896, where dbg.value's of SDNodes that have been
optimised out do not lead to "DBG_VALUE undef" instructions being created.
Such undef instructions are necessary to terminate earlier variable
ranges, otherwise variable values leak past the point where they're valid.
The "invalidated" flag of SDDbgValue is currently being abused to mean two
things:
* The corresponding SDNode is now invalid
* This SDDbgValue should not be emitted
Of which there are several legitimate combinations of meaning:
* The SDNode has been invalidated and we should emit "DBG_VALUE undef"
* The SDNode has been invalidated but the debug data was salvaged, don't
emit anything for this SDDbgValue
* This SDDbgValue has been emitted
This patch introduces distinct "Emitted" and "Invalidated" fields to the
SDDbgValue class, updates users accordingly, and generates "undef"
DBG_VALUEs for invalidated records. Awkwardly, there are circumstances
where we emit SDDbgValue's twice, specifically DebugInfo/X86/dbg-addr-dse.ll
which I've preserved.
Differential Revision: https://reviews.llvm.org/D55372
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348751 91177308-0d34-0410-b5e6-96231b3b80d8
The machine scheduler currently biases register copies to/from
physical registers to be closer to their point of use / def to
minimize their live ranges. This change extends this to also physical
register assignments from immediate values.
This causes a reduction in reduction in overall register pressure and
minor reduction in spills and indirectly fixes an out-of-registers
assertion (PR39391).
Most test changes are from minor instruction reorderings and register
name selection changes and direct consequences of that.
Reviewers: MatzeB, qcolombet, myatsina, pcc
Subscribers: nemanjai, jvesely, nhaehnle, eraman, hiraditya,
javed.absar, arphaman, jfb, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54218
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346894 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Ranges base address specifiers can save a lot of object size in
relocation records especially in optimized builds.
For an optimized self-host build of Clang with split DWARF and debug
info compression in object files, but uncompressed debug info in the
executable, this change produces about 18% smaller object files and 6%
larger executable.
While it would've been nice to turn this on by default, gold's 32 bit
gdb-index support crashes on this input & I don't think there's any
perfect heuristic to implement solely in LLVM that would suffice - so
we'll need a flag one way or another (also possible people might want to
aggressively optimized for executable size that contains debug info
(even with compression this would still come at some cost to executable
size)) - so let's plumb it through.
Differential Revision: https://reviews.llvm.org/D54242
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346788 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: The debug_info_offset values in .debug_{,gnu_}pub{name,types} may be relocated. Change it to DWARFSection so that we can get relocated values.
Reviewers: ruiu, dblaikie, grimar, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D54375
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346615 91177308-0d34-0410-b5e6-96231b3b80d8
These tests are meant to test dwarf emission (or prolog/epilogue
generation) so we can convert them to .mir and only run the relevant
part of the pipeline.
This way they become independent of changes in earlier passes such as my
planned changes to RegAllocFast.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345919 91177308-0d34-0410-b5e6-96231b3b80d8
The debug-use flag must be set exactly for uses on DBG_VALUEs. This is
so obvious that it can be trivially inferred while parsing. This will
reduce noise when printing while omitting an information that has little
value to the user.
The parser will keep recognizing the flag for compatibility with old
`.mir` files.
Differential Revision: https://reviews.llvm.org/D53903
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345671 91177308-0d34-0410-b5e6-96231b3b80d8
Aaron Smith