Adding another CU-wide list, in this case of imported_modules (since they
should be relatively rare, it seemed better to add a list where each element
had a "context" value, rather than add a (usually empty) list to every scope).
This takes care of DW_TAG_imported_module, but to fully address PR14606 we'll
need to expand this to cover DW_TAG_imported_declaration too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179836 91177308-0d34-0410-b5e6-96231b3b80d8
A min/max operation is represented by a select(cmp(lt/le/gt/ge, X, Y), X, Y)
sequence in LLVM. If we see such a sequence we can treat it just as any other
commutative binary instruction and reduce it.
This appears to help bzip2 by about 1.5% on an imac12,2.
radar://12960601
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179773 91177308-0d34-0410-b5e6-96231b3b80d8
This occurs due to an alloca representing a separate ownership from the
original pointer. Thus consider the following pseudo-IR:
objc_retain(%a)
for (...) {
objc_retain(%a)
%block <- %a
F(%block)
objc_release(%block)
}
objc_release(%a)
From the perspective of the optimizer, the %block is a separate
provenance from the original %a. Thus the optimizer pairs up the inner
retain for %a and the outer release from %a, resulting in segfaults.
This is fixed by noting that the signature of a mismatch of
retain/releases inside the for loop is a Use/CanRelease top down with an
None bottom up (since bottom up the Retain-CanRelease-Use-Release
sequence is completed by the inner objc_retain, but top down due to the
differing provenance from the objc_release said sequence is not
completed). In said case in CheckForCFGHazards, we now clear the state
of %a implying that no pairing will occur.
Additionally a test case is included.
rdar://12969722
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179747 91177308-0d34-0410-b5e6-96231b3b80d8
If a switch instruction has a case for every possible value of its type,
with the same successor, SimplifyCFG would replace it with an icmp ult,
but the computation of the bound overflows in that case, which inverts
the test.
Patch by Jed Davis!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179587 91177308-0d34-0410-b5e6-96231b3b80d8
Two return types are not equivalent if one is a pointer and the other is an
integral. This is because we cannot bitcast a pointer to an integral value.
PR15185
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179569 91177308-0d34-0410-b5e6-96231b3b80d8
One performs: (X == 13 | X == 14) -> X-13 <u 2
The other: (A == C1 || A == C2) -> (A & ~(C1 ^ C2)) == C1
The problem is that there are certain values of C1 and C2 that
trigger both transforms but the first one blocks out the second,
this generates suboptimal code.
Reordering the transforms should be better in every case and
allows us to do interesting stuff like turn:
%shr = lshr i32 %X, 4
%and = and i32 %shr, 15
%add = add i32 %and, -14
%tobool = icmp ne i32 %add, 0
into:
%and = and i32 %X, 240
%tobool = icmp ne i32 %and, 224
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179493 91177308-0d34-0410-b5e6-96231b3b80d8
This is basically the same fix in three different places. We use a set to avoid
walking the whole tree of a big ConstantExprs multiple times.
For example: (select cmp, (add big_expr 1), (add big_expr 2))
We don't want to visit big_expr twice here, it may consist of thousands of
nodes.
The testcase exercises this by creating an insanely large ConstantExprs out of
a loop. It's questionable if the optimizer should ever create those, but this
can be triggered with real C code. Fixes PR15714.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179458 91177308-0d34-0410-b5e6-96231b3b80d8
When trying to collapse sequences of insertelement/extractelement
instructions into single shuffle instructions, there is one specific
case where the Instruction Combiner wrongly updates the resulting
Mask of shuffle indexes.
The problem is in function CollectShuffleElments.
If we have a sequence of insert/extract element instructions
like the one below:
%tmp1 = extractelement <4 x float> %LHS, i32 0
%tmp2 = insertelement <4 x float> %RHS, float %tmp1, i32 1
%tmp3 = extractelement <4 x float> %RHS, i32 2
%tmp4 = insertelement <4 x float> %tmp2, float %tmp3, i32 3
Where:
. %RHS will have a mask of [4,5,6,7]
. %LHS will have a mask of [0,1,2,3]
The Mask of shuffle indexes is wrongly computed to [4,1,6,7]
instead of [4,0,6,7].
When analyzing %tmp2 in order to compute the Mask for the
resulting shuffle instruction, the algorithm forgets to update
the mask index at position 1 with the index associated to the
element extracted from %LHS by instruction %tmp1.
Patch by Andrea DiBiagio!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179291 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds the infrastructure for performing bottom-up SLP vectorization (and other optimizations) on parallel computations.
The infrastructure has three potential users:
1. The loop vectorizer needs to be able to vectorize AOS data structures such as (sum += A[i] + A[i+1]).
2. The BB-vectorizer needs this infrastructure for bottom-up SLP vectorization, because bottom-up vectorization is faster to compute.
3. A loop-roller needs to be able to analyze consecutive chains and roll them into a loop, in order to reduce code size. A loop roller does not need to create vector instructions, and this infrastructure separates the chain analysis from the vectorization.
This patch also includes a simple (100 LOC) bottom up SLP vectorizer that uses the infrastructure, and can vectorize this code:
void SAXPY(int *x, int *y, int a, int i) {
x[i] = a * x[i] + y[i];
x[i+1] = a * x[i+1] + y[i+1];
x[i+2] = a * x[i+2] + y[i+2];
x[i+3] = a * x[i+3] + y[i+3];
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179117 91177308-0d34-0410-b5e6-96231b3b80d8
The fix for PR14972 in r177055 introduced a real think-o in the *store*
side, likely because I was much more focused on the load side. While we
can arbitrarily widen (or narrow) a loaded value, we can't arbitrarily
widen a value to be stored, as that changes the width of memory access!
Lock down the code path in the store rewriting which would do this to
only handle the intended circumstance.
All of the existing tests continue to pass, and I've added a test from
the PR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178974 91177308-0d34-0410-b5e6-96231b3b80d8
This is the counterpart to commit r160637, except it performs the action
in the bottomup portion of the data flow analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178922 91177308-0d34-0410-b5e6-96231b3b80d8
The normal dataflow sequence in the ARC optimizer consists of the following
states:
Retain -> CanRelease -> Use -> Release
The optimizer before this patch stored the uses that determine the lifetime of
the retainable object pointer when it bottom up hits a retain or when top down
it hits a release. This is correct for an imprecise lifetime scenario since what
we are trying to do is remove retains/releases while making sure that no
``CanRelease'' (which is usually a call) deallocates the given pointer before we
get to the ``Use'' (since that would cause a segfault).
If we are considering the precise lifetime scenario though, this is not
correct. In such a situation, we *DO* care about the previous sequence, but
additionally, we wish to track the uses resulting from the following incomplete
sequences:
Retain -> CanRelease -> Release (TopDown)
Retain <- Use <- Release (BottomUp)
*NOTE* This patch looks large but the most of it consists of updating
test cases. Additionally this fix exposed an additional bug. I removed
the test case that expressed said bug and will recommit it with the fix
in a little bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178921 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization is unstable at this moment; it
1) block us on a very important application
2) PR15200
3) test6 and test7 in test/Transforms/ScalarRepl/dynamic-vector-gep.ll
(the CHECK command compare the output against wrong result)
I personally believe this optimization should not have any impact on the
autovectorized code, as auto-vectorizer is supposed to put gather/scatter
in a "right" way. Although in theory downstream optimizaters might reveal
some gather/scatter optimization opportunities, the chance is quite slim.
For the hand-crafted vectorizing code, in term of redundancy elimination,
load-CSE, copy-propagation and DSE can collectively achieve the same result,
but in much simpler way. On the other hand, these optimizers are able to
improve the code in a incremental way; in contrast, SROA is sort of all-or-none
approach. However, SROA might slighly win in stack size, as it tries to figure
out a stretch of memory tightenly cover the area accessed by the dynamic index.
rdar://13174884
PR15200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178912 91177308-0d34-0410-b5e6-96231b3b80d8
Pass down the fact that an operand is going to be a vector of constants.
This should bring the performance of MultiSource/Benchmarks/PAQ8p/paq8p on x86
back. It had degraded to scalar performance due to my pervious shift cost change
that made all shifts expensive on x86.
radar://13576547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178809 91177308-0d34-0410-b5e6-96231b3b80d8
The semantics of ARC implies that a pointer passed into an objc_autorelease
must live until some point (potentially down the stack) where an
autorelease pool is popped. On the other hand, an
objc_autoreleaseReturnValue just signifies that the object must live
until the end of the given function at least.
Thus objc_autorelease is stronger than objc_autoreleaseReturnValue in
terms of the semantics of ARC* implying that performing the given
strength reduction without any knowledge of how this relates to
the autorelease pool pop that is further up the stack violates the
semantics of ARC.
*Even though objc_autoreleaseReturnValue if you know that no RV
optimization will occur is more computationally expensive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178612 91177308-0d34-0410-b5e6-96231b3b80d8
The iterator could be invalidated when it's recursively deleting a whole bunch
of constant expressions in a constant initializer.
Note: This was only reproducible if `opt' was run on a `.bc' file. If `opt' was
run on a `.ll' file, it wouldn't crash. This is why the test first pushes the
`.ll' file through `llvm-as' before feeding it to `opt'.
PR15440
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178531 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, objc-arc-expand will make sure that the
objc_retainAutoreleasedReturnValue, objc_autoreleaseReturnValue, and ret
will all have %call as an argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178382 91177308-0d34-0410-b5e6-96231b3b80d8
clang.arc.used is an interesting call for ARC since ObjCARCContract
needs to run to remove said intrinsic to avoid a linker error (since the
call does not exist).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178369 91177308-0d34-0410-b5e6-96231b3b80d8
Since we handle optimizable objc_retainBlocks through strength reduction
in OptimizableIndividualCalls, we know that all code after that point
will only see non-optimizable objc_retainBlock calls. IsForwarding is
only called by functions after that point, so it is ok to just classify
objc_retainBlock as non-forwarding.
<rdar://problem/13249661>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178285 91177308-0d34-0410-b5e6-96231b3b80d8
If an objc_retainBlock has the copy_on_escape metadata attached to it
AND if the block pointer argument only escapes down the stack, we are
allowed to strength reduce the objc_retainBlock to to an objc_retain and
thus optimize it.
Current there is logic in the ARC data flow analysis to handle
this case which is complicated and involved making distinctions in
between objc_retainBlock and objc_retain in certain places and
considering them the same in others.
This patch simplifies said code by:
1. Performing the strength reduction in the initial ARC peephole
analysis (ObjCARCOpts::OptimizeIndividualCalls).
2. Changes the ARC dataflow analysis (which runs after the peephole
analysis) to consider all objc_retainBlock calls to not be optimizable
(since if the call was optimizable, we would have strength reduced it
already).
This patch leaves in the infrastructure in the ARC dataflow analysis to
handle this case, which due to 2 will just be dead code. I am doing this
on purpose to separate the removal of the old code from the testing of
the new code.
<rdar://problem/13249661>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178284 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 342d92c7a0.
Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178215 91177308-0d34-0410-b5e6-96231b3b80d8
The test was removed since I had not turned off the test during release
builds. This fails since ARC annotations support is conditionally
compiled out during release builds. I added the proper requires header
to assuage this issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178101 91177308-0d34-0410-b5e6-96231b3b80d8
This is just the basic groundwork for supporting DW_TAG_imported_module but I
wanted to commit this before pushing support further into Clang or LLVM so that
this rather churny change is isolated from the rest of the work. The major
churn here is obviously adding another field (within the common DIScope prefix)
to all DIScopes (files, classes, namespaces, lexical scopes, etc). This should
be the last big churny change needed for DW_TAG_imported_module/using directive
support/PR14606.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178099 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow for verification and analysis of the merge function of
the data flow analyses in the ARC optimizer.
The actual implementation of this feature is by introducing calls to
the functions llvm.arc.annotation.{bottomup,topdown}.{bbstart,bbend}
which are only declared. Each such call takes in a pointer to a global
with the same name as the pointer whose provenance is being tracked and
a pointer whose name is one of our Sequence states and points to a
string that contains the same name.
To ensure that the optimizer does not consider these annotations in any
way, I made it so that the annotations are considered to be of IC_None
type.
A test case is included for this commit and the previous
ObjCARCAnnotation commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177952 91177308-0d34-0410-b5e6-96231b3b80d8
The problem is that the code mistakenly took for granted that following constructor
is able to create an APFloat from a *SIGNED* integer:
APFloat::APFloat(const fltSemantics &ourSemantics, integerPart value)
rdar://13486998
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177906 91177308-0d34-0410-b5e6-96231b3b80d8
This simplification happens at 2 places :
- using the nsw attribute when the shl / mul is used by a sign test
- when the shl / mul is compared for (in)equality to zero
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177856 91177308-0d34-0410-b5e6-96231b3b80d8
The original code used i32, and i64 if legal. This introduced unneeded
casts when they aren't legal, or when the index variable i has another
type. In order of preference: try to use i's type; use the smallest
fitting legal type (using an added DataLayout method); default to i32.
A testcase checks that this works when the index gep operand is i16.
Patch by : Ahmed Bougacha <ahmed.bougacha@gmail.com>
Reviewed by : Duncan
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177712 91177308-0d34-0410-b5e6-96231b3b80d8
The simplify-libcalls pass implemented a doInitialization hook to infer
function prototype attributes for well-known functions. Given that the
simplify-libcalls pass is going away *and* that the functionattrs pass
is already in place to deduce function attributes, I am moving this logic
to the functionattrs pass. This approach was discussed during patch
review:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20121126/157465.html.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177619 91177308-0d34-0410-b5e6-96231b3b80d8
- it is trivially known to be used inside the loop in a way that can not be optimized away
- there is no use outside of the loop which can take advantage of the computation hoisting
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177432 91177308-0d34-0410-b5e6-96231b3b80d8
This handles the case where we have an inbounds GEP with alloca as the pointer.
This fixes the regression in PR12750 and rdar://13286434.
Note that we can also fix this by handling some GEP cases in isKnownNonNull.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177321 91177308-0d34-0410-b5e6-96231b3b80d8
*NOTE* I verified that the original bug behind
dont-infinite-loop-during-block-escape-analysis.ll occurs when using opt on
retain-block-escape-analysis.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177240 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first step to making all DIScopes have a common metadata prefix (so
that things (using directives, for example) that can appear in any scope can be
added to that common prefix). DIFile is itself a DIScope so the common prefix
of all DIScopes cannot be a DIFile - instead it's the raw filename/directory
name pair.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177239 91177308-0d34-0410-b5e6-96231b3b80d8
This test makes sure that the ObjCARC escape analysis looks at the uses of
instructions which copy the block pointer value by checking all four cases where
that can occur.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177232 91177308-0d34-0410-b5e6-96231b3b80d8
We generate a select with a vectorized condition argument when the condition is
NOT loop invariant. Not the other way around.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177098 91177308-0d34-0410-b5e6-96231b3b80d8
Rules include:
1)1 x*y +/- x*z => x*(y +/- z)
(the order of operands dosen't matter)
2) y/x +/- z/x => (y +/- z)/x
The transformation is disabled if the new add/sub expr "y +/- z" is a
denormal/naz/inifinity.
rdar://12911472
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177088 91177308-0d34-0410-b5e6-96231b3b80d8
The fundamental problem is that SROA didn't allow for overly wide loads
where the bits past the end of the alloca were masked away and the load
was sufficiently aligned to ensure there is no risk of page fault, or
other trapping behavior. With such widened loads, SROA would delete the
load entirely rather than clamping it to the size of the alloca in order
to allow mem2reg to fire. This was exposed by a test case that neatly
arranged for GVN to run first, widening certain loads, followed by an
inline step, and then SROA which miscompiles the code. However, I see no
reason why this hasn't been plaguing us in other contexts. It seems
deeply broken.
Diagnosing all of the above took all of 10 minutes of debugging. The
really annoying aspect is that fixing this completely breaks the pass.
;] There was an implicit reliance on the fact that no loads or stores
extended past the alloca once we decided to rewrite them in the final
stage of SROA. This was used to encode information about whether the
loads and stores had been split across multiple partitions of the
original alloca. That required threading explicit tracking of whether
a *use* of a partition is split across multiple partitions.
Once that was done, another problem arose: we allowed splitting of
integer loads and stores iff they were loads and stores to the entire
alloca. This is a really arbitrary limitation, and splitting at least
some integer loads and stores is crucial to maximize promotion
opportunities. My first attempt was to start removing the restriction
entirely, but currently that does Very Bad Things by causing *many*
common alloca patterns to be fully decomposed into i8 operations and
lots of or-ing together to produce larger integers on demand. The code
bloat is terrifying. That is still the right end-goal, but substantial
work must be done to either merge partitions or ensure that small i8
values are eagerly merged in some other pass. Sadly, figuring all this
out took essentially all the time and effort here.
So the end result is that we allow splitting only when the load or store
at least covers the alloca. That ensures widened loads and stores don't
hurt SROA, and that we don't rampantly decompose operations more than we
have previously.
All of this was already fairly well tested, and so I've just updated the
tests to cover the wide load behavior. I can add a test that crafts the
pass ordering magic which caused the original PR, but that seems really
brittle and to provide little benefit. The fundamental problem is that
widened loads should Just Work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177055 91177308-0d34-0410-b5e6-96231b3b80d8
constructs default arguments. It can now take default arguments from
cl::opt'ions. Add a new -default-gcov-version=... option, and actually test it!
Sink the reverse-order of the version into GCOVProfiling, hiding it from our
users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177002 91177308-0d34-0410-b5e6-96231b3b80d8
This is the next step towards making the metadata for DIScopes have a common
prefix rather than having to delegate based on their tag type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176913 91177308-0d34-0410-b5e6-96231b3b80d8
This could be 'null' or the empty string, DIDescriptor::getStringField
coalesces the two cases anyway so it's just a matter of legible/efficient
representation.
The change in behavior of the DICompileUnit::get* functions could be
subsumed by the full verification check - but ideally that should just be an
assertion if we could front-load the actual debug info metadata failure paths.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176907 91177308-0d34-0410-b5e6-96231b3b80d8