For 8-bit divrems where the remainder is used, we used to generate:
divb %sil
shrw $8, %ax
movzbl %al, %eax
That was to avoid an H-reg access, which is problematic mainly because
it isn't possible in REX-prefixed instructions.
This patch optimizes that to:
divb %sil
movzbl %ah, %eax
To do that, we explicitly extend AH, and extract the L-subreg in the
resulting register. The extension is done using the NOREX variants of
MOVZX. To support signed operations, MOVSX_NOREX is also added.
Further, this introduces a new SDNode type, [us]divrem_ext_hreg, which is
then lowered to a sequence containing a single zext (rather than 2).
Differential Revision: http://reviews.llvm.org/D6064
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221176 91177308-0d34-0410-b5e6-96231b3b80d8
EarlyCSE uses a simple generation scheme for handling memory-based
dependencies, and calls to @llvm.assume (which are marked as writing to memory
to ensure the preservation of control dependencies) disturb that scheme
unnecessarily. Skipping calls to @llvm.assume is legal, and the alternative
(adding AA calls in EarlyCSE) is likely undesirable (we have GVN for that).
Fixes PR21448.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221175 91177308-0d34-0410-b5e6-96231b3b80d8
Function calls aren't supported yet.
This was reverted due to build breakages, which should be fixed now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221173 91177308-0d34-0410-b5e6-96231b3b80d8
call DAGCombiner. But we ran into a case (on Windows) where the
calling convention causes argument lowering to bail out of fast-isel,
and we end up in CodeGenAndEmitDAG() which does run DAGCombiner.
So, we need to make DAGCombiner check for 'optnone' after all.
Commit includes the test that found this, plus another one that got
missed in the original optnone work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221168 91177308-0d34-0410-b5e6-96231b3b80d8
This CPU definition is redundant. The Cortex-A9 is defined as
supporting multiprocessing extensions. Remove its definition and
update appropriate tests.
LLVM defines both a cortex-a9 CPU and a cortex-a9-mp CPU. The only
difference between the two CPU definitions in ARM.td is that
cortex-a9-mp contains the feature FeatureMP for multiprocessing
extensions.
This is redundant since the Cortex-A9 is defined as having
multiprocessing extensions in the TRMs. armcc also defines the
Cortex-A9 as having multiprocessing extensions by default.
Change-Id: Ifcadaa6c322be0a33d9d2a39cfdd7da1d75981a7
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221166 91177308-0d34-0410-b5e6-96231b3b80d8
Some literals in the AArch64 backend had 15 'f's rather than 16, causing
comparisons with a constant 0xffffffffffffffff to be miscompiled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221157 91177308-0d34-0410-b5e6-96231b3b80d8
test/MC/ARM/directive-eabi_attribute.s had gotten out-of-sync with
test/MC/ARM/directive-eabi_attribute-2.s. The former tests the encoding of
build attributes in object files, and the latter the encoding in assembly
files. Since both these tests need to be updated at the same time, it makes
sense to combine them into a single test. The object file encodings are being
checked against the ouput of -arm-attributes rather than by direct byte
comparisons which makes for easier reading.
Change-Id: I0075de506ae5626fb2fa235383fe5ce6a65a15a9
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221155 91177308-0d34-0410-b5e6-96231b3b80d8
The MRI scripts have to work with CRLF, and in general it is probably
a good idea to support this in a core utility like LineIterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221153 91177308-0d34-0410-b5e6-96231b3b80d8
When LLVM emits DWARF call frame information, it currently creates a local,
section-relative symbol in the code section, which is pointed to by a
relocation on the .eh_frame section. However, for C++ we emit some functions in
section groups, and the SysV ABI has some rules to make it easier to remove
these sections
(http://www.sco.com/developers/gabi/latest/ch4.sheader.html#section_group_rules):
A symbol table entry with STB_LOCAL binding that is defined relative to one
of a group's sections, and that is contained in a symbol table section that is
not part of the group, must be discarded if the group members are discarded.
References to this symbol table entry from outside the group are not allowed.
This means that we need to use the function symbol for the relocation, not a
temporary symbol.
There was a comment in the code claiming that the local symbol was used to
avoid creating a relocation, but a relocation must be created anyway as the
code and CFI are in different sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221150 91177308-0d34-0410-b5e6-96231b3b80d8
Bindings built out-of-tree, e.g. via OPAM, should append
a line to META.llvm like the following:
linkopts = "-cclib -L$libdir -cclib -Wl,-rpath,$libdir"
where $libdir is the lib/ directory where LLVM libraries are
installed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221139 91177308-0d34-0410-b5e6-96231b3b80d8
ocamlc and ocamlopt expose a distinct set of buildsystem bugs, e.g.
only ocamlc would detect -custom or -dllib-related bugs, and as all
buildbots will have ocamlopt, these bugs will stay hidden.
This change should add no more than 30 seconds of testing time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221137 91177308-0d34-0410-b5e6-96231b3b80d8
The issue was that linkAppendingVarProto does the full linking job, including
deleting the old dst variable. The fix is just to call it and return early
if we have a GV with appending linkage.
original message:
Refactor duplicated code in liking GlobalValues.
There is quiet a bit of logic that is common to any GlobalValue but was
duplicated for Functions, GlobalVariables and GlobalAliases.
While at it, merge visibility even when comdats are used, fixing pr21415.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221098 91177308-0d34-0410-b5e6-96231b3b80d8
This commit introduces heap-use-after-free detected by ASan. Here is the output
for one of several tests that detect it:
******************** TEST 'LLVM :: Linker/AppendingLinkage.ll' FAILED ********************
Command Output (stderr):
--
=================================================================
==2122==ERROR: AddressSanitizer: heap-use-after-free on address 0x60c00000b9c8 at pc 0x0000005d05d1 bp 0x7fff64ed27c0 sp 0x7fff64ed27b8
READ of size 4 at 0x60c00000b9c8 thread T0
#0 0x5d05d0 in llvm::GlobalValue::setUnnamedAddr(bool) /usr/local/google/home/chandlerc/src/llvm/build/../include/llvm/IR/GlobalValue.h:115:35
#1 0x69fff1 in (anonymous namespace)::ModuleLinker::linkGlobalValueProto(llvm::GlobalValue*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1041:5
#2 0x697229 in (anonymous namespace)::ModuleLinker::run() /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1485:9
#3 0x696542 in llvm::Linker::linkInModule(llvm::Module*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1621:10
#4 0x4a2db7 in main /usr/local/google/home/chandlerc/src/llvm/build/../tools/llvm-link/llvm-link.cpp:116:9
#5 0x7f4ae61e5ec4 in __libc_start_main /build/buildd/eglibc-2.19/csu/libc-start.c:287
#6 0x41eb71 in _start (/usr/local/google/home/chandlerc/src/llvm/build/bin/llvm-link+0x41eb71)
0x60c00000b9c8 is located 72 bytes inside of 128-byte region [0x60c00000b980,0x60c00000ba00)
freed by thread T0 here:
#0 0x4a1e6b in operator delete(void*) /usr/local/google/home/chandlerc/src/llvm/opt-build/../projects/compiler-rt/lib/asan/asan_new_delete.cc:94:3
#1 0x5d1a7a in llvm::iplist<llvm::GlobalVariable, llvm::ilist_traits<llvm::GlobalVariable> >::erase(llvm::ilist_iterator<llvm::GlobalVariable>) /usr/local/google/home/chandlerc/src/llvm/build/../inclu
de/llvm/ADT/ilist.h:466:5
#2 0x5d1980 in llvm::GlobalVariable::eraseFromParent() /usr/local/google/home/chandlerc/src/llvm/build/../lib/IR/Globals.cpp:204:3
#3 0x6a8a4d in (anonymous namespace)::ModuleLinker::linkAppendingVarProto(llvm::GlobalVariable*, llvm::GlobalVariable const*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.
cpp:980:3
#4 0x6a7403 in (anonymous namespace)::ModuleLinker::linkGlobalVariableProto(llvm::GlobalVariable const*, llvm::GlobalValue*, bool) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkMod
ules.cpp:1074:11
#5 0x69ff4e in (anonymous namespace)::ModuleLinker::linkGlobalValueProto(llvm::GlobalValue*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1028:13
#6 0x697229 in (anonymous namespace)::ModuleLinker::run() /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1485:9
#7 0x696542 in llvm::Linker::linkInModule(llvm::Module*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1621:10
#8 0x4a2db7 in main /usr/local/google/home/chandlerc/src/llvm/build/../tools/llvm-link/llvm-link.cpp:116:9
#9 0x7f4ae61e5ec4 in __libc_start_main /build/buildd/eglibc-2.19/csu/libc-start.c:287
previously allocated by thread T0 here:
#0 0x4a192b in operator new(unsigned long) /usr/local/google/home/chandlerc/src/llvm/opt-build/../projects/compiler-rt/lib/asan/asan_new_delete.cc:62:35
#1 0x61d85c in llvm::User::operator new(unsigned long, unsigned int) /usr/local/google/home/chandlerc/src/llvm/build/../lib/IR/User.cpp:57:19
#2 0x6a7525 in (anonymous namespace)::ModuleLinker::linkGlobalVariableProto(llvm::GlobalVariable const*, llvm::GlobalValue*, bool) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkMod
ules.cpp:1100:3
#3 0x69ff4e in (anonymous namespace)::ModuleLinker::linkGlobalValueProto(llvm::GlobalValue*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1028:13
#4 0x697229 in (anonymous namespace)::ModuleLinker::run() /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1485:9
#5 0x696542 in llvm::Linker::linkInModule(llvm::Module*) /usr/local/google/home/chandlerc/src/llvm/build/../lib/Linker/LinkModules.cpp:1621:10
#6 0x4a2db7 in main /usr/local/google/home/chandlerc/src/llvm/build/../tools/llvm-link/llvm-link.cpp:116:9
#7 0x7f4ae61e5ec4 in __libc_start_main /build/buildd/eglibc-2.19/csu/libc-start.c:287
SUMMARY: AddressSanitizer: heap-use-after-free /usr/local/google/home/chandlerc/src/llvm/build/../include/llvm/IR/GlobalValue.h:115 llvm::GlobalValue::setUnnamedAddr(bool)
Shadow bytes around the buggy address:
0x0c187fff96e0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
0x0c187fff96f0: 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa fa
0x0c187fff9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fa
0x0c187fff9710: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
0x0c187fff9720: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa
=>0x0c187fff9730: fd fd fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd
0x0c187fff9740: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
0x0c187fff9750: fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa fa
0x0c187fff9760: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c187fff9770: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
0x0c187fff9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Heap right redzone: fb
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack partial redzone: f4
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
ASan internal: fe
==2122==ABORTING
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221096 91177308-0d34-0410-b5e6-96231b3b80d8
m_ZExt might bind against a ConstantExpr instead of an Instruction.
Assuming this, using cast<Instruction>, results in InstCombine crashing.
Instead, introduce ZExtOperator to bridge both Instruction and
ConstantExpr ZExts.
This fixes PR21445.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221069 91177308-0d34-0410-b5e6-96231b3b80d8
Will try to find a portable way to test this (or a fixed-target test I
can add such coverage to) shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221068 91177308-0d34-0410-b5e6-96231b3b80d8
This was a compile-unit specific label (unused in type units) and seems
unnecessary anyway when we can more easily directly compute the size of
the compile unit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221067 91177308-0d34-0410-b5e6-96231b3b80d8
This can happen pretty often in code that looks like:
int foo = bar - 1;
if (foo < 0)
do stuff
In this case, bar < 1 is an equivalent condition.
This transform requires that the add instruction be annotated with nsw.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221045 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r221028. Later commits depend on this and
reverting just this one causes even more bots to fail.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221041 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch extends the 'show' and 'merge' commands in llvm-profdata to handle
sample PGO formats. Using the 'merge' command it is now possible to convert
one sample PGO format to another.
The only format that is currently not working is 'gcc'. I still need to
implement support for it in lib/ProfileData.
The changes in the sample profile support classes are needed for the
merge operation.
Reviewers: bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6065
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221032 91177308-0d34-0410-b5e6-96231b3b80d8
"[x86] Simplify vector selection if condition value type matches vselect value type and true value is all ones or false value is all zeros."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221028 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r220996.
It introduced layering violations causing link errors in many
configurations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221020 91177308-0d34-0410-b5e6-96231b3b80d8
There is quiet a bit of logic that is common to any GlobalValue but was
duplicated for Functions, GlobalVariables and GlobalAliases.
While at it, merge visibility even when comdats are used, fixing pr21415.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221014 91177308-0d34-0410-b5e6-96231b3b80d8
We need to figure out how to track ptrtoint values all the
way until result is converted back to a pointer in order
to correctly rewrite the pointer type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220997 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have initial support for VSX, we can begin adding
intrinsics for programmer access to VSX instructions. This patch adds
basic support for VSX intrinsics in general, and tests it by
implementing intrinsics for minimum and maximum for the vector double
data type.
The LLVM portion of this is quite straightforward. There is a
companion patch for Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220988 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds an optimization in CodeGenPrepare to move an extractelement
right before a store when the target can combine them.
The optimization may promote any scalar operations to vector operations in the
way to make that possible.
** Context **
Some targets use different register files for both vector and scalar operations.
This means that transitioning from one domain to another may incur copy from one
register file to another. These copies are not coalescable and may be expensive.
For example, according to the scheduling model, on cortex-A8 a vector to GPR
move is 20 cycles.
** Motivating Example **
Let us consider an example:
define void @foo(<2 x i32>* %addr1, i32* %dest) {
%in1 = load <2 x i32>* %addr1, align 8
%extract = extractelement <2 x i32> %in1, i32 1
%out = or i32 %extract, 1
store i32 %out, i32* %dest, align 4
ret void
}
As it is, this IR generates the following assembly on armv7:
vldr d16, [r0] @vector load
vmov.32 r0, d16[1] @ cross-register-file copy: 20 cycles
orr r0, r0, #1 @ scalar bitwise or
str r0, [r1] @ scalar store
bx lr
Whereas we could generate much faster code:
vldr d16, [r0] @ vector load
vorr.i32 d16, #0x1 @ vector bitwise or
vst1.32 {d16[1]}, [r1:32] @ vector extract + store
bx lr
Half of the computation made in the vector is useless, but this allows to get
rid of the expensive cross-register-file copy.
** Proposed Solution **
To avoid this cross-register-copy penalty, we promote the scalar operations to
vector operations. The penalty will be removed if we manage to promote the whole
chain of computation in the vector domain.
Currently, we do that only when the chain of computation ends by a store and the
target is able to combine an extract with a store.
Stores are the most likely candidates, because other instructions produce values
that would need to be promoted and so, extracted as some point[1]. Moreover,
this is customary that targets feature stores that perform a vector extract (see
AArch64 and X86 for instance).
The proposed implementation relies on the TargetTransformInfo to decide whether
or not it is beneficial to promote a chain of computation in the vector domain.
Unfortunately, this interface is rather inaccurate for this level of details and
although this optimization may be beneficial for X86 and AArch64, the inaccuracy
will lead to the optimization being too aggressive.
Basically in TargetTransformInfo, everything that is legal has a cost of 1,
whereas, even if a vector type is legal, usually a vector operation is slightly
more expensive than its scalar counterpart. That will lead to too many
promotions that may not be counter balanced by the saving of the
cross-register-file copy. For instance, on AArch64 this penalty is just 4
cycles.
For now, the optimization is just enabled for ARM prior than v8, since those
processors have a larger penalty on cross-register-file copies, and the scope is
limited to basic blocks. Because of these two factors, we limit the effects of
the inaccuracy. Indeed, I did not want to build up a fancy cost model with block
frequency and everything on top of that.
[1] We can imagine targets that can combine an extractelement with other
instructions than just stores. If we want to go into that direction, the current
interfaces must be augmented and, moreover, I think this becomes a global isel
problem.
Differential Revision: http://reviews.llvm.org/D5921
<rdar://problem/14170854>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220978 91177308-0d34-0410-b5e6-96231b3b80d8
In a case where we have a no {un,}signed wrap flag on the increment, if
RHS - Start is constant then we can avoid inserting a max operation bewteen
the two, since we can statically determine which is greater.
This allows us to unroll loops such as:
void testcase3(int v) {
for (int i=v; i<=v+1; ++i)
f(i);
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220960 91177308-0d34-0410-b5e6-96231b3b80d8
Since block address values can be larger than 2GB in 64-bit code, they
cannot be loaded simply using an @l / @ha pair, but instead must be
loaded from the TOC, just like GlobalAddress, ConstantPool, and
JumpTable values are.
The commit also fixes a bug in PPCLinuxAsmPrinter::doFinalization where
temporary labels could not be used as TOC values, since code would
attempt (and fail) to use GetOrCreateSymbol to create a symbol of the
same name as the temporary label.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220959 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically:
* Directories match module names.
* Test names match module names.
* The language is called "OCaml", not "Ocaml".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220958 91177308-0d34-0410-b5e6-96231b3b80d8
Since JIT->MCJIT migration, most of the ExecutionEngine interface
became deprecated and/or broken. This especially affected the OCaml
bindings, as runFunction is no longer available, and unlike in C,
it is not possible to coerce a pointer to a function and call it
in OCaml.
In practice, LLVM 3.5 shipped completely unusable
Llvm_executionengine.
The GenericValue interface and runFunction were essentially
a poor man's FFI. As such, this interface was removed and instead
a dependency on ctypes >=0.3 added, which handled platform-specific
aspects of accessing data and calling functions.
The new interface does not expose JIT (which is a shim around MCJIT),
as well as the interpreter (which can't handle a lot of valid IR).
Llvm_executionengine.add_global_mapping is currently unusable
due to PR20656.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220957 91177308-0d34-0410-b5e6-96231b3b80d8
Do a better job classifying symbols. This increases the consistency
between the COFF handling code and the ELF side of things.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220952 91177308-0d34-0410-b5e6-96231b3b80d8
r212242 introduced a legalizer hook, originally to let AArch64 widen
v1i{32,16,8} rather than scalarize, because the legalizer expected, when
scalarizing the result of a conversion operation, to already have
scalarized the operands. On AArch64, v1i64 is legal, so that commit
ensured operations such as v1i32 = trunc v1i64 wouldn't assert.
It did that by choosing to widen v1 types whenever possible. However,
v1i1 types, for which there's no legal widened type, would still trigger
the assert.
This commit fixes that, by only scalarizing a trunc's result when the
operand has already been scalarized, and introducing an extract_elt
otherwise.
This is similar to r205625.
Fixes PR20777.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220937 91177308-0d34-0410-b5e6-96231b3b80d8
