Add explicit Comment Token in Assembly Lexing for future support for
outputting explicit comments from inline assembly. As part of this,
CPPHash Directives are now explicitly distinguished from Hash line
comments in Lexer.
Line comments are recorded as EndOfStatement tokens, not Comment tokens
to simplify compatibility with current TargetParsers. This slightly
complicates comment output.
This remove all lexing tasks out of the parser, does minor cleanup
to remove extraneous newlines Asm Output, and some improvements white
space handling.
Reviewers: rtrieu, dwmw2, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20009
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272953 91177308-0d34-0410-b5e6-96231b3b80d8
Again, the Microsoft linker does not like empty substreams.
We still emit an empty string table if CodeView is enabled, but that
doesn't cause problems because it always contains at least one null
byte.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272183 91177308-0d34-0410-b5e6-96231b3b80d8
The truncateToSize function already has assertion to check the
lower boundary for the number bytes, but it does not check the
upper boundary which could still lead to usage errors.
Differential Revision: http://reviews.llvm.org/D20755
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271773 91177308-0d34-0410-b5e6-96231b3b80d8
Do not issue lexing errors found during the parsing of macro body
definitions and parseIdentifier function in AsmParser. This changes the
Parser to not issue a lexing error when we reach an error, but rather
when it is consumed allowing us time to examine and recover from an
error.
As a result, of this, we stop issuing a both lexing error and a parsing
error in floating-literals test. Minor tweak to parseDirectiveRealValue
to favor more meaningful lexing error over less helpful parse error.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20535
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271542 91177308-0d34-0410-b5e6-96231b3b80d8
Adds the method MCStreamer::EmitBinaryData, which is usually an alias
for EmitBytes. In the MCAsmStreamer case, it is overridden to emit hex
dump output like this:
.byte 0x0e, 0x00, 0x08, 0x10
.byte 0x03, 0x00, 0x00, 0x00
.byte 0x00, 0x00, 0x00, 0x00
.byte 0x00, 0x10, 0x00, 0x00
Also, when verbose asm comments are enabled, this patch prints the dump
output for each comment before its record, like this:
# ArgList (0x1000) {
# TypeLeafKind: LF_ARGLIST (0x1201)
# NumArgs: 0
# Arguments [
# ]
# }
.byte 0x06, 0x00, 0x01, 0x12
.byte 0x00, 0x00, 0x00, 0x00
This should make debugging easier and testing more convenient.
Reviewers: aaboud
Subscribers: majnemer, zturner, amccarth, aaboud, llvm-commits
Differential Revision: http://reviews.llvm.org/D20711
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271313 91177308-0d34-0410-b5e6-96231b3b80d8
Fix: updated clang code which was not updated by mistake.
Original commit message:
[llvm-mc] - Teach llvm-mc to generate zlib styled compression sections.
This patch is strongly based on previously reverted D20331.
(because of gnuutils < 2.26 does not support compressed debug sections in non zlib-gnu style)
Difference that this patch supports both zlib and zlib-gnu styles.
-compress-debug-sections option now supports next values:
-compress-debug-sections=zlib-gnu
-compress-debug-sections=zlib
-compress-debug-sections=none
Previously specifying -compress-debug-sections enabled zlib-gnu compression,
so anyone can put "-compress-debug-sections=zlib-gnu" to restore the behavior
that was before this patch for case when compression was enabled.
Differential revision: http://reviews.llvm.org/D20676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270987 91177308-0d34-0410-b5e6-96231b3b80d8
It broke buildbot:
http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/13585/steps/build/logs/stdio
Initial commit message:
[llvm-mc] - Teach llvm-mc to generate zlib styled compression sections.
This patch is strongly based on previously reverted D20331.
(because of gnuutils < 2.26 does not support compressed debug sections in non zlib-gnu style)
Difference that this patch supports both zlib and zlib-gnu styles.
-compress-debug-sections option now supports next values:
-compress-debug-sections=zlib-gnu
-compress-debug-sections=zlib
-compress-debug-sections=none
Previously specifying -compress-debug-sections enabled zlib-gnu compression,
so anyone can put "-compress-debug-sections=zlib-gnu" to restore the behavior
that was before this patch for case when compression was enabled.
Differential revision: http://reviews.llvm.org/D20676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270978 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is strongly based on previously reverted D20331.
(because of gnuutils < 2.26 does not support compressed debug sections in non zlib-gnu style)
Difference that this patch supports both zlib and zlib-gnu styles.
-compress-debug-sections option now supports next values:
-compress-debug-sections=zlib-gnu
-compress-debug-sections=zlib
-compress-debug-sections=none
Previously specifying -compress-debug-sections enabled zlib-gnu compression,
so anyone can put "-compress-debug-sections=zlib-gnu" to restore the behavior
that was before this patch for case when compression was enabled.
Differential revision: http://reviews.llvm.org/D20676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270977 91177308-0d34-0410-b5e6-96231b3b80d8
We were creating a weak external that tried to reference a static symbol. That
would always fail to link with link.exe.
We now create an external symbol in the same position as the local and refer
to that. This works with link.exe and matches what gas does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270906 91177308-0d34-0410-b5e6-96231b3b80d8
If there is already debug info in the assembly file, and user hope to
use -g option for compiling, we think we should not directly report an
error.
According to what GNU assembler did, it just reused the debug info in
the assembly file, and turned off the DEBUG_TYPE option so that there
will be no new debug info emitted by assembler. This fix is just as what
GNU assembler did.
The concern is the situation that there are two .text sections in the
assembly file, one with debug info and the other one without. Currently
with this fix, the assembler will no longer generate any debug info for
the second .text section. And this is what GNU assembler exactly did for
this situation. So I think this still make some sense.
Patch by Zhizhou Yang!
Differential Revision: http://reviews.llvm.org/D20002
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270806 91177308-0d34-0410-b5e6-96231b3b80d8
Now, after landing r270560, r270557, r270320 it is a proper time.
Original commit message:
[llvm-mc] - Teach llvm-mc to generate compressed debug sections in zlib style.
Before this patch llvm-mc generated zlib-gnu styled sections.
That means no SHF_COMPRESSED flag was set, magic 'zlib' signature
was used in combination with full size field. Sections were renamed to "*.z*".
This patch reimplements the compression style to zlib one as zlib-gnu looks
to be depricated everywhere.
Differential revision: http://reviews.llvm.org/D20331
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270569 91177308-0d34-0410-b5e6-96231b3b80d8
It broke buildbot:
http://lab.llvm.org:8011/builders/clang-s390x-linux/builds/4817/steps/ninja%20check%201/logs/stdio
Actually it is just because D20273 not yet commited, but these 2 were crossing with each other,
and I`ll better find the way to land them separatelly soon.
Initial commit message:
[llvm-mc] - Teach llvm-mc to generate compressed debug sections in zlib style.
Before this patch llvm-mc generated zlib-gnu styled sections.
That means no SHF_COMPRESSED flag was set, magic 'zlib' signature
was used in combination with full size field. Sections were renamed to "*.z*".
This patch reimplements the compression style to zlib one as zlib-gnu looks
to be depricated everywhere.
Differential revision: http://reviews.llvm.org/D20331
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270075 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch llvm-mc generated zlib-gnu styled sections.
That means no SHF_COMPRESSED flag was set, magic 'zlib' signature
was used in combination with full size field. Sections were renamed to "*.z*".
This patch reimplements the compression style to zlib one as zlib-gnu looks
to be depricated everywhere.
Differential revision: http://reviews.llvm.org/D20331
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270070 91177308-0d34-0410-b5e6-96231b3b80d8
MC only needs to know if the output is PIC or not. It never has to
decide about creating GOTs and PLTs for example. The only thing that
MC itself uses this information for is expanding "macros" in sparc and
mips. The rest I am pretty sure could be moved to CodeGen.
This is a cleanup and isolates the code from future changes to
Reloc::Model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269909 91177308-0d34-0410-b5e6-96231b3b80d8
* Reworks the CVSymbolTypes.def to work similarly to TypeRecords.def.
* Moves some enums from SymbolRecords.h to CodeView.h to maintain
consistency with how we do type records.
* Generalize a few simple things like the record prefix
* Define the leaf enum and the kind enum similar to how we do with tyep
records.
Differential Revision: http://reviews.llvm.org/D20342
Reviewed By: amccarth, rnk
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269867 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There seems to have been a misunderstanding as to the meaning of 'offset' in
the rules laid down by our ABI. The previous code believed that 'offset' meant
the offset within the section that the relocation is applied to. However, it
should have meant the offset from the symbol used in the relocation expression.
This patch adds two fields to ELFRelocationEntry and uses them to correct the
order of relocations for MIPS. These fields contain:
* The original symbol before shouldRelocateWithSymbol() is considered. This
ensures that R_MIPS_GOT16 is able to correctly distinguish between local and
external symbols, allowing us to tell whether %got() requires a matching
%lo() or not (local symbols require one, external symbols don't). It also
prevents confusing cases where the fuzzy matching rules cause things like
%hi(foo)/%lo(foo+3) and %hi(bar)/%lo(bar+1) to swap their %lo()'s.
* The original offset before shouldRelocateWithSymbol() is considered. The
existing Addend field is always zero when the object uses in place addends
(because it's already moved it to the encoding) but MIPS needs to use the
original offset to ensure that the linker correctly calculates the carry-in
bit for %hi() and %got().
IAS ensures that unmatchable %hi()/%got() relocations are placed at the end of
the table to ensure that the linker rejects the table (we're unable to report
such errors directly). The alternatives to this risk accidental matching
against inappropriate relocations which may silently compute incorrect values
due to an incorrect carry bit between the %lo() and %hi()/%got().
Reviewers: sdardis
Subscribers: dsanders, sdardis, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D19718
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268733 91177308-0d34-0410-b5e6-96231b3b80d8
This change seems to speed up LLD a bit if it has a lot of mergeable
sections. The number is below. It's not too bad for a small patch.
Time to link Clang (debug build):
w/o patch 6.3696 seconds
w/patch 6.2746 seconds (-1.5%)
Differential Revision: http://reviews.llvm.org/D19933
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268698 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is much closer to the way MIPS relocation expressions work
(%hi(foo + 2) rather than %hi(foo) + 2) and removes the need for the
various bodges in MipsAsmParser::evaluateRelocExpr().
Removing those bodges ensures that the constant stored in MCValue is the
full 32 or 64-bit (depending on ABI) offset from the symbol. This will be used
to correct the %hi/%lo matching needed to sort the relocation table correctly.
As part of this:
* Gave MCExpr::print() the ability to omit parenthesis when emitting a
symbol reference inside a MipsMCExpr operator like %hi(X). Without this
we print things like %lo(($L1)).
* %hi(%neg(%gprel(X))) is now three MipsMCExpr's instead of one. Most of
the related special cases have been removed or moved to MipsMCExpr. We
can remove the rest as we gain support for the less common relocations
when they are not part of this specific combination.
* Renamed MipsMCExpr::VariantKind and the enum prefix ('VK_') to avoid confusion
with MCSymbolRefExpr::VariantKind and its prefix (also 'VK_').
* fixup_Mips_GOT_Local and fixup_Mips_GOT_Global were found to be identical
and merged into fixup_Mips_GOT.
* MO_GOT16 and MO_GOT turned out to be identical and have been merged into
MO_GOT.
* VK_Mips_GOT and VK_Mips_GOT16 turned out to be the same thing so they
have been merged into MEK_GOT
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D19716
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268379 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds a unique ID to the COFF section uniquing map, similar to the
one we have for ELF. The unique id is not currently exposed via the
assembler because we don't have a use case for it yet. Users generally
create .pdata with the .seh_* family of directives, and the assembler
internally needs to produce .pdata and .xdata sections corresponding to
the code section.
The association between .text sections and the assembler-created .xdata
and .pdata sections is maintained as an ID field of MCSectionCOFF. The
CFI-related sections are created with the given unique ID, so if more
code is added to the same text section, we can find and reuse the CFI
sections that were already created.
Reviewers: majnemer, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19376
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268331 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the follow-up patch for http://reviews.llvm.org/D19436
* Update the discriminator reading algorithm to match the assignment algorithm.
* Add test to cover the new algorithm.
Reviewers: dnovillo, echristo, dblaikie
Subscribers: danielcdh, dblaikie, echristo, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19522
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267945 91177308-0d34-0410-b5e6-96231b3b80d8
A latent bug in llvm-objdump used the wrong format specifier on 32-bit
targets, causing the test to fail. This fixes the issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267582 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: The clang assembler assumes that the discriminator remains the same when there is source line change. The correct behavior is that when there is line change, discriminator will automatically reset to 0.
Reviewers: dnovillo, davidxl, echristo
Subscribers: echristo, llvm-commits
Differential Revision: http://reviews.llvm.org/D19436
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267226 91177308-0d34-0410-b5e6-96231b3b80d8
We'd disabled them on x86 because back in the early days some host tools
couldn't handle the new load commands. This no longer holds: anyone capable of
deploying Clang should be able to deploy its copies of ar/ranlib/etc.
rdar://25254790
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267075 91177308-0d34-0410-b5e6-96231b3b80d8
Since we can't emit diagnostics for missing "jmp 1f" labels until the end of
the file, we need to be able to restore the context used to calculate
file/line. This is basically the "# line file" directive that's being used at
the time the expression is seen.
rdar://25706972
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266238 91177308-0d34-0410-b5e6-96231b3b80d8
Before, ELF at least managed a diagnostic but it was a completely untraceable
"undefined symbol" error. MachO had a variety of even worse behaviours: crash,
emit corrupt file, or an equally bad message.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@265984 91177308-0d34-0410-b5e6-96231b3b80d8
This is a fix for PR26941.
When there is both a section and a global definition with the same
name, the global wins.
Section symbols are not added to the symbol table; section references
are left undefined and fixed up in the object writer unless they've
been satisfied by some other definition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264649 91177308-0d34-0410-b5e6-96231b3b80d8
MCContext shouldn't be accessing the filesystem - that's a gross
layering violation and makes it awkward to use as a library or in a
daemon where it may not even be allowed filesystem access.
The CWD lookup here is normally redundant anyway, since the calling
context either also looks up the CWD or sets this to something more
specific. Here, we fix up the one caller that doesn't already set up a
debug compilation dir and make it clear that the responsibility for
such set up is in the users of MCContext.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264109 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263521 91177308-0d34-0410-b5e6-96231b3b80d8
`MCSymbolRefExpr` variant kind for TLSCALL is prefixed with
_ARM_ since this is how it was originally implemented.
The X86_64 version is exactly the same so there's no reason
to create a new variant, we can just rename the existing
one to be machine-independent.
This generalization is the first step to implement support
for GNU2 TLS dialect in MC.
Differential Revision: http://reviews.llvm.org/D18160
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263515 91177308-0d34-0410-b5e6-96231b3b80d8
Until now curly braces could only be used in MS inline assembly to mark block start/end.
All curly braces were removed completely at a very early stage.
This approach caused bugs like:
"m{o}v eax, ebx" turned into "mov eax, ebx" without any error.
In addition, AVX-512 added special operands (e.g., k registers), which are also surrounded by curly braces that mark them as such.
Now, we need to keep the curly braces and identify at a later stage if they are marking block start/end (if so, ignore them), or surrounding special AVX-512 operands (if so, parse them as such).
This patch fixes the bug described above and enables the use of AVX-512 special operands.
This commit is the the llvm part of the patch.
The clang part of the review is: http://reviews.llvm.org/D17766
The llvm part of the review is: http://reviews.llvm.org/D17767
Differential Revision: http://reviews.llvm.org/D17767
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262843 91177308-0d34-0410-b5e6-96231b3b80d8
We supported creating mergeable constant pool entries for smaller
constants but not for 32-byte AVX constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261584 91177308-0d34-0410-b5e6-96231b3b80d8
This apparently comes up when the register allocator decides that a
variable will become undef along a certain path.
Also improve the error message we emit when we can't map from LLVM
register number to CV register number.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261016 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixed an issue for mips with an instruction such as 'sdc1 $f1, 272 +8(a0)' which has a space between '272' and '+'. The parser would then parse '272' and '+8' as two arguments instead of a single expression resulting in one too many arguments in the pseudo instruction.
The reason that the test case has been changed is so that the expected
output matches the output of the GNU assembler.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13592
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260521 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Refactor common value, scope, and label tracking logic out of DwarfDebug
into a common base class called DebugHandlerBase.
Update an old LLVM IR test case to avoid an assertion in LexicalScopes.
Reviewers: dblaikie, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16931
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260432 91177308-0d34-0410-b5e6-96231b3b80d8
CodeView, like most other debug formats, represents the live range of a
variable so that debuggers might print them out.
They use a variety of records to represent how a particular variable
might be available (in a register, in a frame pointer, etc.) along with
a set of ranges where this debug information is relevant.
However, the format only allows us to use ranges which are limited to a
maximum of 0xF000 in size. This means that we need to split our debug
information into chunks of 0xF000.
Because the layout of code is not known until *very* late, we must use a
new fragment to record the information we need until we can know
*exactly* what the range is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259868 91177308-0d34-0410-b5e6-96231b3b80d8
CodeView requires us to accurately describe the extent of the inlined
code. We did this by grabbing the next debug location in source order
and using *that* to denote where we stopped inlining. However, this is
not sufficient or correct in instances where there is no next debug
location or the next debug location belongs to the start of another
function.
To get this correct, use the end symbol of the function to denote the
last possible place the inlining could have stopped at.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259548 91177308-0d34-0410-b5e6-96231b3b80d8
This directive emits the binary annotations that describe line and code
deltas in inlined call sites. Single-stepping through inlined frames in
windbg now works.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259535 91177308-0d34-0410-b5e6-96231b3b80d8
If a target can only emit 8-bits data, we would loop in EmitValueImpl
since it will try to split a 32-bits data in 1 chunk of 32-bits.
No test since all current targets can emit 32bits at a time.
Patch by Alexandru Guduleasa!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259399 91177308-0d34-0410-b5e6-96231b3b80d8
With poorly chosen custom parameters, the line table encoding logic would
sometimes end up generating a special opcode bigger than 255, which is wrong.
The set of default parameters that LLVM uses isn't subject to this bug.
When carefully chosing the line table parameters, it's impossible to fall into the
corner case that this patch fixes. The standard however doesn't require that these
parameters be carefully chosen. And even if it did, we shouldn't generate broken
encoding.
Add a unittest for this specific encoding bug, and while at it, create some unit
tests for the encoding logic using different sets of parameters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259334 91177308-0d34-0410-b5e6-96231b3b80d8
This support is _very_ rudimentary, just enough to get some basic data
into the CodeView debug section.
Left to do is:
- Use the combined opcodes to save space.
- Do something about code offsets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259230 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There are three parts to inlined call frames:
1. The inlinee line subsection
2. The inline site symbol record
3. The function ids referenced by both
This change starts by emitting function ids (3) for all subprograms and
emitting the base inline site symbol record (2). The actual line numbers
in (2) use an encoded format that will come next, along with the inlinee
line subsection.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16333
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259217 91177308-0d34-0410-b5e6-96231b3b80d8
I don't seem to see these locally, maybe just need to update my
compiler, or we haven't turned them on for LLVM's build and we should...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259146 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259126 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259117 91177308-0d34-0410-b5e6-96231b3b80d8
Various bits we want to use the new ABI actually compile with "-arch armv7k
-miphoneos-version-min=9.0". Not ideal, but also not ridiculous given how
slices work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258975 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258861 91177308-0d34-0410-b5e6-96231b3b80d8
For historic reasons, the behavior of .align differs between targets.
Fortunately, there are alternatives, .p2align and .balign, which make the
interpretation of the parameter explicit, and which behave consistently across
targets.
This patch teaches MC to use .p2align instead of .align, so that people reading
code for multiple architectures don't have to remember which way each platform
does its .align directive.
Differential Revision: http://reviews.llvm.org/D16549
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258750 91177308-0d34-0410-b5e6-96231b3b80d8
Consolidate the code which handles string table offsets less than 999999
with the code for offsets less than 9999999. While we are here,
simplify the code by not using sprintf to generate the string.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258664 91177308-0d34-0410-b5e6-96231b3b80d8
When a symbol S shows up in an expression in assembly there are two
possible interpretations
* The expression is referring to the value of S in this file.
* The expression is referring to the value after symbol resolution.
In the first case the assembler can reason about the value and try to
produce a relocation.
In the second case, that is only possible if the symbol cannot be
preempted.
Assemblers are not very consistent about which interpretation gets used.
This changes MC to agree with GAS in the case of an expression of the
form "Sym - WeakSym".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258329 91177308-0d34-0410-b5e6-96231b3b80d8
This brings the pr26208 testcase down to 3.2 seconds. Not checking it in
since it does create a 4GB .o file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258149 91177308-0d34-0410-b5e6-96231b3b80d8
The value size was always 1 or 0, so we don't need to store it.
In a no asserts build this takes the testcase of pr26208 from 11 to 10
seconds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258141 91177308-0d34-0410-b5e6-96231b3b80d8
No tests since llvm-mc takes 14 seconds on it. I will try to improve it
and then test.
Part of pr26208.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258129 91177308-0d34-0410-b5e6-96231b3b80d8
This method has no callers.
Also remove X86ELFRelocationInfo.cpp and X86MachORelocationInfo.cpp
which only existed to provide an implementation of that method.
Ok'd by Rafael and Jim.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257859 91177308-0d34-0410-b5e6-96231b3b80d8
Currently WebAssembly has two kinds of relocations; data addresses and
function addresses. This adds ELF relocations for them, as well as an
MC symbol kind to indicate which type of relocation is needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257416 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM_ENABLE_TIMESTAMPS controls if timestamps are embedded into llvm's
binaries. Turning it off is useful for deterministic builds.
r246905 made it so that the define suddenly also controls if the binaries that
the llvm binaries _create_ embed timestamps or not – but this shouldn't be a
configure-time option. r256203/r256204 added a driver option to toggle this on
and off, so this patch now passes this driver option in LLVM_ENABLE_TIMESTAMPS
builds so that if LLVM_ENABLE_TIMESTAMPS is set, the build of LLVM is
deterministic – but the built clang can still write timestamps into other
executables when requested.
This also allows removing some of the test machinery added in r292012 to work
around this problem.
See PR24740 for background.
http://reviews.llvm.org/D15783
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256958 91177308-0d34-0410-b5e6-96231b3b80d8
SubtargetFeatures::ApplyFeatureFlag to be static, so that
MCSubtargetInfo doesn't need to instantiate SubtargetFeatures
for nothing. Also change the return type to void, as it
wasn't ever used.
This is a partial commit of http://reviews.llvm.org/D15746
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256823 91177308-0d34-0410-b5e6-96231b3b80d8
of casting the integer '4' to such a pointer. There is no reason to
expect '4' to be a portable or reliable pointer of this form. The only
reason this ever worked is because the PointerIntPair that this actually
gets used with has an artificially *low* presumed alignment that allowed
it to work. When the alignment of PointerIntPair is derived from the
actual type's alignment, the asserts start firing on this pointer. I'm
amazed we never managed to do anything that triggered the alignment
sanitizer with it, as this is just flat out UB.
If folks dislike this approach to providing a sentinel fragment address,
there are a myriad of other alternatives, suggestions welcome. But this
one has the distinct advantage of not requiring the friend dance of
ilist's sentinel (which I'll point out is *also* in play for
MCFragment!) and seems to be using a nicely provided facility in
MCFragment to establish just such dummy nodes.
This is part of a series of patches to allow LLVM to check for complete
pointee types when computing its pointer traits. This is absolutely
necessary to get correct (or reproducible) results for things like how
many low bits are guaranteed to be zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256552 91177308-0d34-0410-b5e6-96231b3b80d8
header to its own header, allowing users of fragments to have a narrower
header file, and avoid circular header dependencies when getting the
definition of MCSection prior to inspecting traits on MCSection
pointers.
This is part of a series of patches to allow LLVM to check for complete
pointee types when computing its pointer traits. This is absolutely
necessary to get correct (or reproducible) results for things like how
many low bits are guaranteed to be zero.
Note that this doesn't in any way change the design of MC, it is just
moving code around to allow the *header files* to be more fine grained.
Without this, it is impossible to get a complete type for MCSection
where it is needed.
If anyone would prefer a different slicing of the header files, I'm
happy to oblige of course. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256548 91177308-0d34-0410-b5e6-96231b3b80d8
InitMCObjectFileInfo was trying to override the triple in awkward ways.
For example, a triple specifying COFF but not Windows was forced as ELF.
This makes it easy for internal invariants to get violated, such as
those which triggered PR25912.
This fixes PR25912.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256226 91177308-0d34-0410-b5e6-96231b3b80d8
Today, we always take into account the possibility that object files
produced by MC may be consumed by an incremental linker. This results
in us initialing fields which vary with time (TimeDateStamp) which harms
hermetic builds (e.g. verifying a self-host went well) and produces
sub-optimal code because we cannot assume anything about the relative
position of functions within a section (call sites can get redirected
through incremental linker thunks).
Let's provide an MCTargetOption which controls this behavior so that we
can disable this functionality if we know a-priori that the build will
not rely on /incremental.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256203 91177308-0d34-0410-b5e6-96231b3b80d8
Support for COFF timestamps was unintentionally broken in r246905 when
it was conditionally available depending on whether or not LLVM was
configured with LLVM_ENABLE_TIMESTAMPS. However, Config/config.h was
never included which essentially broke the feature. Due to lax testing,
the breakage was never identified until we observed strange failures
during incremental links of Chromium.
This issue is resolved by simply including Config/config.h in
WinCOFFObjectWriter and teaching lit that the MC/COFF/timestamp.s test
is conditionally supported depending on LLVM_ENABLE_TIMESTAMPS. With
this in place, we can strengthen the test to ensure that it will not
accidentally get broken in the future.
This fixes PR25891.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256137 91177308-0d34-0410-b5e6-96231b3b80d8
These days relocations are created and stored in a deterministic way.
The order they are created is also suitable for the .o file, so we don't
need an explicit sort.
The last remaining exception is MIPS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255902 91177308-0d34-0410-b5e6-96231b3b80d8
The CreatedADWARFSection flag was added in r232842, but isn't cleared
properly when resetting the streamer's state. Fix that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254571 91177308-0d34-0410-b5e6-96231b3b80d8
This is very rudimentary support for debug_cu_index, but it is enough to
allow llvm-dwarfdump to find the offsets for contributions and
correctly dump debug_info.
It will need to actually find the real signature of the unit and build
the real hash table with the right number of buckets, as per the DWP
specification.
It will also need to be expanded to cover the tu_index as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254489 91177308-0d34-0410-b5e6-96231b3b80d8
The COFF object writer was previously adding unnecessary symbols to its
temporary data structures and cleaning them up later. This made the code
harder to understand and caused a bug (aliases classed as temporary symbols
would cause an assertion failure). A much simpler way of handling such
symbols is to ask the layout for their section-relative position when needed.
Tested with a bootstrap on Windows and by building Chrome.
Differential Revision: http://reviews.llvm.org/D14975
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254183 91177308-0d34-0410-b5e6-96231b3b80d8
Starting on an input stream that is not at offset 0 would trigger the
assert in WinCOFFObjectWriter.cpp:1065:
assert(getStream().tell() <= (*i)->Header.PointerToRawData &&
"Section::PointerToRawData is insane!");
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253464 91177308-0d34-0410-b5e6-96231b3b80d8
If a section is rw, it is irrelevant if the dynamic linker will write to
it or not.
It looks like llvm implemented this because gcc was doing it. It looks
like gcc implemented this in the hope that it would put all the
relocated items close together and speed up the dynamic linker.
There are two problem with this:
* It doesn't work. Both bfd and gold will map .data.rel to .data and
concatenate the input sections in the order they are seen.
* If we want a feature like that, it can be implemented directly in the
linker since it knowns where the dynamic relocations are.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253436 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, if the assembler encounters an error after parsing (such as an
out-of-range fixup), it reports this as a fatal error, and so stops after the
first error. However, for most of these there is an obvious way to recover
after emitting the error, such as emitting the fixup with a value of zero. This
means that we can report on all of the errors in a file, not just the first
one. MCContext::reportError records the fact that an error was encountered, so
we won't actually emit an object file with the incorrect contents.
Differential Revision: http://reviews.llvm.org/D14717
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253328 91177308-0d34-0410-b5e6-96231b3b80d8
This adds reportError to MCContext, which can be used as an alternative to
reportFatalError when the assembler wants to try to continue processing the
rest of the file after the error is reported, so that all of the errors ina
file can be reported. It records the fact that an error was encountered, so we
can avoid emitting an object file if any errors occurred.
This patch doesn't add any uses of this function (a later patch will convert
most uses of reportFatalError to use it), but there is a small functional
change: we use the SourceManager to print the error message, even if we have a
null SMLoc. This means that we get a SourceManager-style message, with the file
and line information shown as <unknown>, rather than the "LLVM ERROR" style
used by report_fatal_error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253327 91177308-0d34-0410-b5e6-96231b3b80d8
The way prelink used to work was
* The compiler decides if a given section only has relocations that
are know to point to the same DSO. If so, it names it
.data.rel.ro.local<something>.
* The static linker puts all of these together.
* The prelinker program assigns addresses to each library and resolves
the local relocations.
There are many problems with this:
* It is incompatible with address space randomization.
* The information passed by the compiler is redundant. The linker
knows if a given relocation is in the same DSO or not. If could sort
by that if so desired.
* There are newer ways of speeding up DSO (gnu hash for example).
* Even if we want to implement this again in the compiler, the previous
implementation is pretty broken. It talks about relocations that are
"resolved by the static linker". If they are resolved, there are none
left for the prelinker. What one needs to track is if an expression
will require only dynamic relocations that point to the same DSO.
At this point it looks like the prelinker is an historical curiosity.
For example, fedora has retired it because it failed to build for two
releases
(http://pkgs.fedoraproject.org/cgit/prelink.git/commit/?id=eb43100a8331d91c801ee3dcdb0a0bb9babfdc1f)
This patch removes support for it. That is, it stops printing the
".local" sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253280 91177308-0d34-0410-b5e6-96231b3b80d8
Storing the source location of the expression that created a constant pool
entry allows us to emit better error messages if we later discover that the
expression cannot be represented by a relocation.
Differential Revision: http://reviews.llvm.org/D14646
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253220 91177308-0d34-0410-b5e6-96231b3b80d8
This allows for accurate architecture targeting as well as removing
duplicate information (hardcoded feature strings) from MCTargetDesc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253196 91177308-0d34-0410-b5e6-96231b3b80d8
MCRelaxableFragment previously kept a copy of MCSubtargetInfo and
MCInst to enable re-encoding the MCInst later during relaxation. A copy
of MCSubtargetInfo (instead of a reference or pointer) was needed
because the feature bits could be modified by the parser.
This commit replaces the MCSubtargetInfo copy in MCRelaxableFragment
with a constant reference to MCSubtargetInfo. The copies of
MCSubtargetInfo are kept in MCContext, and the target parsers are now
responsible for asking MCContext to provide a copy whenever the feature
bits of MCSubtargetInfo have to be toggled.
With this patch, I saw a 4% reduction in peak memory usage when I
compiled verify-uselistorder.lto.bc using llc.
rdar://problem/21736951
Differential Revision: http://reviews.llvm.org/D14346
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253127 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Support for R_MIPS_NONE allows us to parse MIPS16's usage of .reloc.
R_MIPS_32 was included to be able to better test the directive.
Targets can add their relocations by overriding MCAsmBackend::getFixupKind().
Subscribers: grosbach, rafael, majnemer, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13659
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252888 91177308-0d34-0410-b5e6-96231b3b80d8
