Reappy r284044 after revert in r284051. Krzysztof fixed the error in r284049.
The original summary:
This patch tries to fully unroll loops having break statement like this
for (int i = 0; i < 8; i++) {
if (a[i] == value) {
found = true;
break;
}
}
GCC can fully unroll such loops, but currently LLVM cannot because LLVM only
supports loops having exact constant trip counts.
The upper bound of the trip count can be obtained from calling
ScalarEvolution::getMaxBackedgeTakenCount(). Part of the patch is the
refactoring work in SCEV to prevent duplicating code.
The feature of using the upper bound is enabled under the same circumstance
when runtime unrolling is enabled since both are used to unroll loops without
knowing the exact constant trip count.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284053 91177308-0d34-0410-b5e6-96231b3b80d8
This patch tries to fully unroll loops having break statement like this
for (int i = 0; i < 8; i++) {
if (a[i] == value) {
found = true;
break;
}
}
GCC can fully unroll such loops, but currently LLVM cannot because LLVM only
supports loops having exact constant trip counts.
The upper bound of the trip count can be obtained from calling
ScalarEvolution::getMaxBackedgeTakenCount(). Part of the patch is the
refactoring work in SCEV to prevent duplicating code.
The feature of using the upper bound is enabled under the same circumstance
when runtime unrolling is enabled since both are used to unroll loops without
knowing the exact constant trip count.
Differential Revision: https://reviews.llvm.org/D24790
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284044 91177308-0d34-0410-b5e6-96231b3b80d8
Branch folder removes implicit defs if they are the only non-branching
instructions in a block, and the branches do not use the defined registers.
The problem is that in some cases these implicit defs are required for
the liveness information to be correct.
Differential Revision: https://reviews.llvm.org/D25478
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284036 91177308-0d34-0410-b5e6-96231b3b80d8
This augments the STLExtras toolset with a zip iterator and range
adapter. Zip comes in two varieties: `zip`, which will zip to the
shortest of the input ranges, and `zip_first`, which limits its
`begin() == end()` checks to just the first krange.
Patch by: Bryant Wong <github.com/bryant>
Differential Revision: https://reviews.llvm.org/D23252
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284035 91177308-0d34-0410-b5e6-96231b3b80d8
This is the most basic handling of the indirect access
pseudos using GPR indexing mode. This currently only enables
the mode for a single v_mov_b32 and then disables it.
This is much more complicated to use than the movrel instructions,
so a new optimization pass is probably needed to fold the access
into the uses and keep the mode enabled for them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284031 91177308-0d34-0410-b5e6-96231b3b80d8
Module inline asm was always being linked/concatenated
when running the IRLinker. This is correct for full LTO but not when
we are importing for ThinLTO, as it can result in multiply defined
symbols when the module asm defines a global symbol.
In order to test with llvm-lto2, I had to work around PR30396,
where a symbol that is defined in module assembly but defined in the
LLVM IR appears twice. Added workaround to llvm-lto2 with a FIXME.
Fixes PR30610.
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25359
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284030 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Constant bundle operands may need to retain their constant-ness for
correctness. I'll admit that this is slightly odd, but it looks like
SimplifyCFG already does this for things like @llvm.frameaddress and
@llvm.stackmap, so I suppose adding one more case is not a big deal.
It is possible to add a mechanism to denote bundle operands that need to
remain constants, but that's probably too complicated for the time
being.
Reviewers: jmolloy
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D25502
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284028 91177308-0d34-0410-b5e6-96231b3b80d8
Prevent partial parsing of '$' or '@' of invalid identifiers and fixup
workaround points. NFC Intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284017 91177308-0d34-0410-b5e6-96231b3b80d8
This combiner breaks debug experience and should not be run when optimizations are disabled.
For example:
int main() {
int j = 0;
j += 2;
if (j == 2)
return 0;
return 5;
}
When debugging this code compiled in /O0, it should be valid to break at line "j+=2;" and edit the value of j. It should change the return value of the function.
Differential Revision: https://reviews.llvm.org/D19268
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284014 91177308-0d34-0410-b5e6-96231b3b80d8
An arithmetic shift can be safely changed to a logical shift if the first
operand is known positive. This allows ComputeKnownBits (and similar analysis)
to determine the sign bit of the shifted value in some cases. In turn, this
allows InstCombine to canonicalize a signed comparison (a > 0) into an equality
check (a != 0).
PR30577
Differential Revision: https://reviews.llvm.org/D25119
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284013 91177308-0d34-0410-b5e6-96231b3b80d8
The current Cost Model implementation is very inaccurate and has to be
updated, improved, re-implemented to be able to take into account the
concrete CPU models and the concrete targets where this Cost Model is
being used. For example, the Latency Cost Model should be differ from
Code Size Cost Model, etc.
This patch is the first step to launch the developing and implementation
of a new Cost Model generation.
Differential Revision: https://reviews.llvm.org/D25186
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284012 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed by Andrea on PR30486, we have an unsafe cast to an Instruction type in the select combine which doesn't take into account that it could be a ConstantExpr instead.
Differential Revision: https://reviews.llvm.org/D25466
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284000 91177308-0d34-0410-b5e6-96231b3b80d8
subcommands
This commit fixes a bug where the help output doesn't display subcommands when
a tool has less than 3 subcommands.
This change doesn't include a corresponding unittest as there is no viable way
to provide a unittest for it.
Differential Revision: https://reviews.llvm.org/D25463
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283998 91177308-0d34-0410-b5e6-96231b3b80d8
Add unit tests for checking a few tricky instruction sizes. Also remove the old
tests for the instruction sizes, which were clunky and brittle.
Since this is the first set of target-specific unit tests, we need to add some
CMake plumbing. In the future, adding unit tests for a given target will be as
simple as creating a directory with the same name as the target under
unittests/Target. The tests are only run if the target is enabled in
LLVM_TARGETS_TO_BUILD.
Differential Revision: https://reviews.llvm.org/D24548
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283990 91177308-0d34-0410-b5e6-96231b3b80d8
`RefSCC`.
Also improve the comments surrounding the lazy post-order iterator as
they had grown stale since the RefSCC/SCC split.
I'm sure there are more comments that need updating here, but I saw and
fixed these and didn't want to lose them. I've not gotten to doing
a really complete audit of every comment yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283987 91177308-0d34-0410-b5e6-96231b3b80d8
The basic inlining operation makes the following changes to the call graph:
1) Add edges that were previously transitive edges. This is always trivial and
this patch gives the LCG helper methods to make this more convenient.
2) Remove the inlined edge. We had existing support for this, but it contained
bugs that needed to be fixed. Testing in the same pattern as the inliner
exposes these bugs very nicely.
3) Delete a function when it becomes dead because it is internal and all calls
have been inlined. The LCG had no support at all for this operation, so this
adds that support.
Two unittests have been added that exercise this specific mutation pattern to
the call graph. They were extremely effective in uncovering bugs. Sadly,
a large fraction of the code here is just to implement those unit tests, but
I think they're paying for themselves. =]
This was split out of a patch that actually uses the routines to
implement inlining in the new pass manager in order to isolate (with
unit tests) the logic that was entirely within the LCG.
Many thanks for the careful review from folks! There will be a few minor
follow-up patches based on the comments in the review as well.
Differential Revision: https://reviews.llvm.org/D24225
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283982 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r283946.
This breaks when build with GCC:
lib/Fuzzer/FuzzerTracePC.cpp:169:6: error: always_inline function might not be inlinable [-Werror=attributes]
lib/Fuzzer/FuzzerTracePC.cpp:169:6: error: inlining failed in call to always_inline 'void fuzzer::TracePC::HandleCmp(void*, T, T) [with T = long unsigned int]': target specific option mismatch
lib/Fuzzer/FuzzerTracePC.cpp:198:65: error: called from here
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283979 91177308-0d34-0410-b5e6-96231b3b80d8
Although Copies are not specific to preISel, we still have to assign them
a proper register class. However, given they are not constrained to
anything we do not have to handle the source register at the copy. It
will be properly mapped when reaching the related definition.
In the process, the handlong of G_ANYEXT is slightly modified as those
end up being selected as copy. The difference is that when register size
do not match on both sides, we need to insert SUBREG_TO_REG operation,
otherwise the post RA copy expansion will not be happy!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283972 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The Python file `utils/lit/lit/ShUtil.py` contains:
1. Logic used by lit itself
2. A set of unit tests for that logic, which can be run by invoking
`python utils/lit/lit/ShUtil.py`
Move these unit tests to a `tests/unit` subdirectory of lit, and run
the tests as part of lit's test suite. This ensures that, should the
lit test suite be included in LLVM's own regression test suite, these
unit tests will also be run.
(Instructions on how to run lit's test suite can be found in
`utils/lit/README.txt`.)
Reviewers: ddunbar, echristo, delcypher, beanz
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25411
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283968 91177308-0d34-0410-b5e6-96231b3b80d8
This is a refreshed version of a patch that was reverted: it fixes
the problems reported in both PR30216 and PR30499, and
contains all the test-cases from both bugs.
To hoist stores past loads, we used to search for potential
conflicting loads on the hoisting path by following a MemorySSA
def-def link from the store to be hoisted to the previous
defining memory access, and from there we followed the def-use
chains to all the uses that occur on the hoisting path. The
problem is that the def-def link may point to a store that does
not alias with the store to be hoisted, and so the loads that are
walked may not alias with the store to be hoisted, and even as in
the testcase of PR30216, the loads that may alias with the store
to be hoisted are not visited.
The current patch visits all loads on the path from the store to
be hoisted to the hoisting position and uses the alias analysis
to ask whether the store may alias the load. I was not able to
use the MemorySSA functionality to ask for whether load and
store are clobbered: I'm not sure which function to call, so I
used a call to AA->isNoAlias().
Store past store is still working as before using a MemorySSA
query: I added an extra test to pr30216.ll to make sure store
past store does not regress.
Tested on x86_64-linux with check and a test-suite run.
Differential Revision: https://reviews.llvm.org/D25476
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283965 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In PPCMIPeephole, when we see two splat instructions, we can't simply do the following transformation:
B = Splat A
C = Splat B
=>
C = Splat A
because B may still be used between these two instructions. Instead, we should make the second Splat a PPC::COPY and let later passes decide whether to remove it or not:
B = Splat A
C = Splat B
=>
B = Splat A
C = COPY B
Fixes PR30663.
Reviewers: echristo, iteratee, kbarton, nemanjai
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25493
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283961 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes a crash in the build_vector -> vector_shuffle combine
when the first vector input is twice as wide as the output,
and the second input vector is even wider.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283953 91177308-0d34-0410-b5e6-96231b3b80d8
On Darwin, marking a section as "regular,live_support" means that a
symbol in the section should only be kept live if it has a reference to
something that is live. Otherwise, the linker is free to dead-strip it.
Turn this functionality on for the __llvm_prf_data section.
This means that counters and data associated with dead functions will be
removed from dead-stripped binaries. This will result in smaller
profiles and binaries, and should speed up profile collection.
Tested with check-profile, llvm-lit test/tools/llvm-{cov,profdata}, and
check-llvm.
Differential Revision: https://reviews.llvm.org/D25456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283947 91177308-0d34-0410-b5e6-96231b3b80d8
Reverts r283938 to reinstate r283867 with a fix.
The original change had an ArrayRef referring to a destroyed temporary
initializer list. Use plain C arrays instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283942 91177308-0d34-0410-b5e6-96231b3b80d8
load commands that uses the MachO::linker_option_command
type but not used in llvm libObject code but used in llvm tool code.
This includes just LC_LINKER_OPTION load command.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283939 91177308-0d34-0410-b5e6-96231b3b80d8
This re-applies r283798, disabled in r283803, with the static_assert
tests disabled under MSVC. The deleted functions still seem to catch
mistakes in MSVC, so it's not a significant loss.
Part of rdar://problem/16375365
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283935 91177308-0d34-0410-b5e6-96231b3b80d8
