Previosy, if actual instruction have one of optional operands then other optional operands listed before this also should be presented.
For example instruction v_fract_f32 v0, v1, mul:2 have one optional operand - OMod and do not have optional operand clamp. Previously this was not allowed because clamp is listed before omod in AsmString:
string AsmString = "v_fract_f32$vdst, $src0_modifiers$clamp$omod";
Making this work required some hacks (both OMod and Clamp match classes have same PredicateMethod).
Now, if MatchInstructionImpl meets formal optional operand that is not presented in actual instruction it skips this formal operand and tries to match current actual operand with next formal.
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17568
[AMDGPU] Assembler: Check immediate types for several optional operands in predicate methods
With this change you should place optional operands in order specified by asm string:
clamp -> omod
offset -> glc -> slc -> tfe
Fixes for several tests.
Depends on D17568
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17644
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262314 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The bug was that dextu's operand 3 would print 0-31 instead of 32-63 when
printing assembly. This came up when replacing
MipsInstPrinter::printUnsignedImm() with a version that could handle arbitrary
bit widths.
MipsAsmPrinter::printUnsignedImm*() don't seem to be used so they have been
removed.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15521
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262231 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously, it would always select DEXT and substitute any invalid matches
for DEXTU/DEXTM during MipsMCCodeEmitter::encodeInstruction(). This works
but causes problems when adding range checked immediates to IAS.
Now isel selects the correct variant up front.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16810
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262229 91177308-0d34-0410-b5e6-96231b3b80d8
Previous check-in message was:
The patch adds missing registers and instructions to complete all the registers supported by the Sparc v8 manual.
These are all co-processor registers, with the exception of the floating-point deferred-trap queue register.
Although these will not be lowered automatically by any instructions, it allows the use of co-processor
instructions implemented by inline-assembly.
Code Reviewed at http://reviews.llvm.org/D17133, with the exception of a very small change in brace placement in SparcInstrInfo.td,
which was formerly causing a problem in the disassembly of the %fq register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262135 91177308-0d34-0410-b5e6-96231b3b80d8
These are all co-processor registers, with the exception of the floating-point deferred-trap queue register.
Although these will not be lowered automatically by any instructions, it allows the use of co-processor
instructions implemented by inline-assembly.
Code Reviewed at http://reviews.llvm.org/D17133, with the exception of a very small change in brace placement in SparcInstrInfo.td,
which was formerly causing a problem in the disassembly of the %fq register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262133 91177308-0d34-0410-b5e6-96231b3b80d8
This matches the behavior of the HSAIL clock instruction.
s_realmemtime is used if the subtarget supports it, and falls
back to s_memtime if not.
Also introduces new intrinsics for each of s_memtime / s_memrealtime.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262119 91177308-0d34-0410-b5e6-96231b3b80d8
Add parsing and printing of image operands. Matches legacy sp3 assembler.
Change image instruction order to have data/image/sampler operands in the beginning. This is needed because optional operands in MC are always last.
Update SITargetLowering for new order.
Add basic MC test.
Update CodeGen tests.
Review: http://reviews.llvm.org/D17574
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261995 91177308-0d34-0410-b5e6-96231b3b80d8
Support all instructions with VOP1 encoding with 32 or 64-bit operands for VI subtarget:
VGPR_32 and VReg_64 operand register classes
VS_32 and VS_64 operand register classes with inline and literal constants
Tests for VOP1 instructions.
Patch by: skolton
Reviewers: arsenm, tstellarAMD
Review: http://reviews.llvm.org/D17194
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261878 91177308-0d34-0410-b5e6-96231b3b80d8
We were emitting only one half of a the paired relocations needed for these
instructions because we decided that an offset needed a scattered relocation.
In fact, movw/movt relocations can be paired without being scattered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261679 91177308-0d34-0410-b5e6-96231b3b80d8
Changes:
- Added disassembler project
- Fixed all decoding conflicts in .td files
- Added DecoderMethod=“NONE” option to Target.td that allows to
disable decoder generation for an instruction.
- Created decoding functions for VS_32 and VReg_32 register classes.
- Added stubs for decoding all register classes.
- Added several tests for disassembler
Disassembler only supports:
- VI subtarget
- VOP1 instruction encoding
- 32-bit register operands and inline constants
[Valery]
One of the point that requires to pay attention to is how decoder
conflicts were resolved:
- Groups of target instructions were separated by using different
DecoderNamespace (SICI, VI, CI) using similar to AssemblerPredicate
approach.
- There were conflicts in IMAGE_<> instructions caused by two
different reasons:
1. dmask wasn’t specified for the output (fixed)
2. There are image instructions that differ only by the number of
the address components but have the same encoding by the HW spec. The
actual number of address components is determined by the HW at runtime
using image resource descriptor starting from the VGPR encoded in an
IMAGE instruction. This means that we should choose only one instruction
from conflicting group to be the rule for decoder. I didn’t find the way
to disable decoder generation for an arbitrary instruction and therefore
made a onelinear fix to tablegen generator that would suppress decoder
generation when DecoderMethod is set to “NONE”. This is a change that
should be reviewed and submitted first. Otherwise I would need to
specify different DecoderNamespace for every instruction in the
conflicting group. I haven’t checked yet if DecoderMethod=“NONE” is not
used in other targets.
3. IMAGE_GATHER decoder generation is for now disabled and to be
done later.
[/Valery]
Patch By: Sam Kolton
Differential Revision: http://reviews.llvm.org/D16723
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261185 91177308-0d34-0410-b5e6-96231b3b80d8
This section is used for debug information and has no need to be
in memory at runtime. This patch also fixes an error when compiling
the Linux kernel. The error is that there are relocations within the
.pdr section in a VDSO. SHT_REL was removed as it is a section type
and not a section flag, therefore it does not make sense for it to
be there. With this patch, LLVM now emits the same flags as
the GNU assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261083 91177308-0d34-0410-b5e6-96231b3b80d8
The usual way to get a 32-bit relocation is to use a constant extender which doubles the size of the instruction, 4 bytes to 8 bytes.
Another way is to put a .word32 and mix code and data within a function. The disadvantage is it's not a valid instruction encoding and jumping over it causes prefetch stalls inside the hardware.
This relocation packs a 23-bit value in to an "r0 = add(rX, #a)" instruction by overwriting the source register bits. Since r0 is the return value register, if this instruction is placed after a function call which return void, r0 will be filled with an undefined value, the prefetch won't be confused, and the callee can access the constant value by way of the link register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261006 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In order to pass the tests, this required marking R_MIPS_16 relocations
as needing to point to the symbol and not the section.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260896 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This section is used for debug information and has no need to be
in memory at runtime. With this patch, LLVM now emits the same flags as
the GNU assembler. This patch also fixes an error when compiling
the Linux kernel, The error is that there are relocations within the
.pdr section in a VDSO.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D17199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260879 91177308-0d34-0410-b5e6-96231b3b80d8
Historically, AMD internal sp3 assembler has flat_store* addr, data
format. To match existing code and to enable reuse, change LLVM
definitions to match. Also update MC and CodeGen tests.
Differential Revision: http://reviews.llvm.org/D16927
Patch by: Nikolay Haustov
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260694 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Added support for "VOP3Only" attribute in VOP3bInst encoding.
Set VOP3Only=1 for V_DIV_SCALE_F64/32 insns.
Added support for multi-dest instructions in AMDGPUAs::cvt*().
Added lit test for "V_DIV_SCALE_F64|F32 vreg,vcc|sreg,vreg,vreg,vreg".
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, SamWot, nhaustov, vpykhtin
Differential Revision: http://reviews.llvm.org/D16995
Patch By: Artem Tamazov
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260560 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixed an issue for mips with an instruction such as 'sdc1 $f1, 272 +8(a0)' which has a space between '272' and '+'. The parser would then parse '272' and '+8' as two arguments instead of a single expression resulting in one too many arguments in the pseudo instruction.
The reason that the test case has been changed is so that the expected
output matches the output of the GNU assembler.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13592
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260521 91177308-0d34-0410-b5e6-96231b3b80d8
Separate methods to convert parsed instructions to MCInst:
- VOP3 only instructions (always create modifiers as operands in MCInst)
- VOP2 instrunctions with modifiers (create modifiers as operands
in MCInst when e64 encoding is forced or modifiers are parsed)
- VOP2 instructions without modifiers (do not create modifiers
as operands in MCInst)
- Add VOP3Only flag. Pass HasMods flag to VOP3Common.
- Simplify code that deals with modifiers (-1 is now same as
0). This is no longer needed.
- Add few tests (more will be added separately).
Update error message now correct.
Patch By: Nikolay Haustov
Differential Revision: http://reviews.llvm.org/D16778
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260483 91177308-0d34-0410-b5e6-96231b3b80d8
The encodings for floating point conditions A(lways) and N(ever) were
incorrectly specified for the assembly parser, per Sparc manual v8 page
121. This change corrects that mistake.
Also, strangely, all of the branch instructions already had MC test
cases, except for the broken ones. Added the tests.
Patch by Chris Dewhurst
Differential Revision: http://reviews.llvm.org/D17074
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260390 91177308-0d34-0410-b5e6-96231b3b80d8
