llvm/test/CodeGen/Mips
Matheus Almeida c308f165a0 [mips] Add initial support for NaN2008 in the back-end.
This is so that EF_MIPS_NAN2008 is set if we are using IEEE 754-2008
NaN encoding (-mnan=2008). This patch also adds support for parsing
'.nan legacy' and '.nan 2008' assembly directives. The handling of
these directives should match GAS' behaviour i.e., the last directive
in use sets the ELF header bit (EF_MIPS_NAN2008).

Differential Revision: http://reviews.llvm.org/D3346


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206396 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-16 15:48:55 +00:00
..
cconv [mips] Correct r206370 to account for non-Linux targets using the small data section. 2014-04-16 12:29:08 +00:00
msa [mips] Correct lowering of VECTOR_SHUFFLE to VSHF. 2014-03-21 16:56:51 +00:00
2008-06-05-Carry.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-07-03-SRet.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-07-06-fadd64.ll Re-enable some of the disabled tests. Use FileCheck instead of grep to check 2011-09-21 17:36:30 +00:00
2008-07-07-Float2Int.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-07-07-FPExtend.ll Re-enable some of the disabled tests. Use FileCheck instead of grep to check 2011-09-21 17:36:30 +00:00
2008-07-07-IntDoubleConvertions.ll Re-enable some of the disabled tests. Use FileCheck instead of grep to check 2011-09-21 17:36:30 +00:00
2008-07-15-InternalConstant.ll Re-enable some of the disabled tests. Use FileCheck instead of grep to check 2011-09-21 17:36:30 +00:00
2008-07-15-SmallSection.ll Remove +. 2011-09-21 17:43:48 +00:00
2008-07-16-SignExtInReg.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
2008-07-22-Cstpool.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-07-23-fpcmp.ll Fix the remaining TCL-style quotes found in the testsuite. This is 2012-07-02 19:09:46 +00:00
2008-07-29-icmp.ll Fix the remaining TCL-style quotes found in the testsuite. This is 2012-07-02 19:09:46 +00:00
2008-07-31-fcopysign.ll
2008-08-01-AsmInline.ll [mips] Properly parse registers that appear in inline-asm constraints. 2013-08-14 00:21:25 +00:00
2008-08-03-fabs64.ll
2008-08-03-ReturnDouble.ll
2008-08-04-Bitconvert.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-08-06-Alloca.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-08-07-CC.ll
2008-08-07-FPRound.ll Re-enable some of the disabled tests. Use FileCheck instead of grep to check 2011-09-21 17:36:30 +00:00
2008-08-08-bswap.ll
2008-08-08-ctlz.ll Manually upgrade the test suite to specify the flag to cttz and ctlz. 2011-12-12 11:59:10 +00:00
2008-10-13-LegalizerBug.ll
2008-11-10-xint_to_fp.ll Remove the no longer existent psp triple from a test. 2012-03-08 21:22:27 +00:00
2009-11-16-CstPoolLoad.ll [mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler. 2014-02-20 14:58:19 +00:00
2010-07-20-Switch.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
2010-11-09-CountLeading.ll Manually upgrade the test suite to specify the flag to cttz and ctlz. 2011-12-12 11:59:10 +00:00
2010-11-09-Mul.ll
2011-05-26-BranchKillsVreg.ll
2012-12-12-ExpandMemcpy.ll Fix a logic bug in inline expansion of memcpy / memset with an overlapping 2012-12-12 20:43:23 +00:00
2013-11-18-fp64-const0.ll [mips] Fix 'ran out of registers' in MIPS32 with FP64 when generating code for (ConstantFP 0.0) 2013-11-18 13:12:43 +00:00
abicalls.ll [mips] Fix emission of '.option pic0' for MIPS-IV. 2014-04-16 13:58:57 +00:00
addc.ll
addi.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
addressing-mode.ll Initial implementation of MipsTargetLowering::isLegalAddressingMode. 2012-11-17 00:25:41 +00:00
align16.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
alloca16.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
alloca.ll TBAA: remove !tbaa from testing cases if not used. 2013-04-30 17:52:57 +00:00
analyzebranch.ll Fix test cases. 2012-05-12 03:25:16 +00:00
and1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
asm-large-immediate.ll The inline asm operand modifier 'n' is suppose 2012-06-21 21:37:54 +00:00
atomic.ll IR: add a second ordering operand to cmpxhg for failure 2014-03-11 10:48:52 +00:00
atomicops.ll IR: add a second ordering operand to cmpxhg for failure 2014-03-11 10:48:52 +00:00
beqzc1.ll Make all the conditional Mips 16 branches get initially set for the 2013-11-15 02:21:52 +00:00
beqzc.ll Make all the conditional Mips 16 branches get initially set for the 2013-11-15 02:21:52 +00:00
biggot.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
blez_bgez.ll [mips] Make mips64 the default CPU for the mips64 architecture 2014-02-20 13:13:33 +00:00
blockaddr.ll [mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler. 2014-02-20 14:58:19 +00:00
br-jmp.ll Expand pseudos/macros for Selt. This is the last of the complex 2013-02-23 03:09:56 +00:00
brconeq.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconeqk.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconeqz.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconge.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brcongt.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconle.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconlt.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconne.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconnek.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconnez.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brdelayslot.ll [mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out 2013-09-28 00:12:32 +00:00
brind.ll Implement brind operator for mips16. 2012-10-28 23:08:07 +00:00
brsize3.ll Take care of long short branch immediate instructions for mips16 in 2013-11-13 23:52:18 +00:00
brsize3a.ll Take care of long short branch immediate instructions for mips16 in 2013-11-13 23:52:18 +00:00
bswap.ll [mips] Check emitted code for llvm.bswap.i32 on MIPS16/MIPS64 and llvm.bswap.i64 on MIPS16. 2014-03-31 11:00:04 +00:00
buildpairextractelementf64.ll Add extra CHECK prefix to tests with explicit prefix 2014-02-16 13:28:15 +00:00
cache-intrinsic.ll Add @llvm.clear_cache builtin 2014-03-26 12:52:28 +00:00
call-optimization.ll [mips] Fix test case. 2013-12-07 02:48:29 +00:00
check-noat.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
ci2.ll Fix a funny bug I introduced during conversion of ARM constant islands to Mips. 2013-11-24 02:53:09 +00:00
cmov.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
cmplarge.ll TBAA: remove !tbaa from testing cases when they are not needed. 2013-09-30 18:17:35 +00:00
const1.ll Make first substantial checkin of my port of ARM constant islands code to Mips. 2013-10-27 21:57:36 +00:00
const4a.ll Fix broken CHECK lines. 2014-01-11 21:06:00 +00:00
const6.ll Update older test cases for latest patch. 2013-11-24 03:37:56 +00:00
const6a.ll Adjust offsets for max load instruction offsets. This is more pessimistic 2014-01-16 00:47:46 +00:00
const-mult.ll [mips] Make mips64 the default CPU for the mips64 architecture 2014-02-20 13:13:33 +00:00
constantfp0.ll
cprestore.ll Fix test cases. 2012-05-12 03:25:16 +00:00
ctlz.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
DbgValueOtherTargets.test Remove unnecessary leading comment characters in lit-only file 2013-03-18 22:08:16 +00:00
disable-tail-merge.ll [mips] Test case for r192124. 2013-10-07 21:32:57 +00:00
div_rem.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
div.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
divrem.ll [mips] Transfer kill flag to the newly created operand. 2013-10-15 01:06:30 +00:00
divu_remu.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
divu.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
double2int.ll
dsp-patterns-cmp-vselect.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
dsp-patterns.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
dsp-r1.ll [mips] Split the DSP control register and define one register for each field of 2013-05-03 18:37:49 +00:00
dsp-r2.ll MIPS DSP: add operands to make sure instruction strings are being matched. 2012-09-28 21:23:16 +00:00
dsp-vec-load-store.ll [mips] Expand vector truncating stores and extending loads. 2013-08-02 19:23:33 +00:00
eh-dwarf-cfa.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
eh-return32.ll [mips] Small update to the implementation of eh.return for Mips. 2013-04-02 23:02:07 +00:00
eh-return64.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
eh.ll TBAA: remove !tbaa from testing cases if not used. 2013-04-30 17:52:57 +00:00
elf_eflags.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
emit-big-cst.ll Teach AsmPrinter how to print odd constants. 2013-06-07 18:36:03 +00:00
ex2.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
extins.ll [mips] Do not generate INS/EXT nodes if target does not have support for 2013-10-09 23:36:17 +00:00
f16abs.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
fabs.ll Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math 2014-04-09 09:56:43 +00:00
fastcc.ll [mips] Forbid the use of registers t6, t7 and t8 if the target is NaCl. 2014-02-07 17:16:40 +00:00
fcopysign-f32-f64.ll [mips] Fix fcopysign for MIPS-IV and add the test. 2014-04-14 16:24:12 +00:00
fcopysign.ll [mips] Fix fcopysign for MIPS-IV and add the test. 2014-04-14 16:24:12 +00:00
fixdfsf.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
fmadd1.ll Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math 2014-04-09 09:56:43 +00:00
fneg.ll Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math 2014-04-09 09:56:43 +00:00
fp16instrinsmc.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
fp16mix.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
fp16static.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
fp-indexed-ls.ll [mips] Add NaCl target and forbid indexed loads and stores for it 2014-02-05 17:19:30 +00:00
fp-spill-reload.ll Make register FP allocatable if the compiled function does not have dynamic 2012-05-09 01:38:13 +00:00
fpbr.ll Flip the new block-placement pass to be on by default. 2012-04-16 13:49:17 +00:00
fpneeded.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
fpnotneeded.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
fptr2.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
frame-address.ll Add more addFrameMove test coverage. 2013-05-16 14:51:26 +00:00
frem.ll Expand FREM. 2012-03-29 18:43:11 +00:00
global-address.ll [mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler. 2014-02-20 14:58:19 +00:00
global-pointer-reg.ll Make the following changes in MipsAsmPrinter.cpp: 2012-05-12 00:48:43 +00:00
gpreg-lazy-binding.ll [mips] Print move instructions. 2013-03-04 22:25:01 +00:00
gprestore.ll Fix test cases. 2012-05-12 03:25:16 +00:00
helloworld.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
hf1_body.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
hf16_1.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
hf16call32_body.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
hf16call32.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
hfptrcall.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
i32k.ll Check in conditional branches for constant islands. Still need to finish 2013-11-28 00:56:37 +00:00
i64arg.ll [mips] Make sure there is a chain edge dependency between loads that read 2013-11-09 02:38:51 +00:00
imm.ll Add a test case for r146900. 2011-12-19 20:24:28 +00:00
indirectcall.ll jalr should use t9 ($25) for indirect calls regardless of the relocation model 2011-12-09 01:45:12 +00:00
init-array.ll Fix UseInitArray option for MIPS target. 2012-09-05 06:17:17 +00:00
inlineasm64.ll Have getRegForInlineAsmConstraint return the correct register class when target 2012-01-04 02:45:01 +00:00
inlineasm_constraint.ll Mips specific inline assembler constraint 'R' 2013-03-04 21:33:15 +00:00
inlineasm-cnstrnt-bad-I-1.ll Add support for the 'I' inline asm constraint. Also add tests 2012-05-07 03:13:32 +00:00
inlineasm-cnstrnt-bad-J.ll Support the 'J' constraint. 2012-05-07 03:13:42 +00:00
inlineasm-cnstrnt-bad-K.ll Add support for the inline asm constraint 'K'. 2012-05-07 05:46:29 +00:00
inlineasm-cnstrnt-bad-L.ll Add support for the 'L' inline asm constraint. 2012-05-07 05:46:37 +00:00
inlineasm-cnstrnt-bad-N.ll Add support for the 'N' inline asm constraint. 2012-05-07 05:46:43 +00:00
inlineasm-cnstrnt-bad-O.ll Add support for the 'O' constraint. 2012-05-07 05:46:48 +00:00
inlineasm-cnstrnt-bad-P.ll Add support for the 'P' constraint. 2012-05-07 06:25:02 +00:00
inlineasm-cnstrnt-reg64.ll Add support for the 'I' inline asm constraint. Also add tests 2012-05-07 03:13:32 +00:00
inlineasm-cnstrnt-reg.ll Add support for the 'l' constraint. 2012-05-07 06:25:15 +00:00
inlineasm-operand-code.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
inlineasmmemop.ll Mips specific inline asm memory operand modifier test case 2013-04-11 19:39:19 +00:00
int-to-float-conversion.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
internalfunc.ll Fix test cases. 2012-05-12 03:25:16 +00:00
jtstat.ll Test case hygiene. 2013-03-09 18:25:40 +00:00
l3mc.ll This patch has two main functions: 2014-02-14 19:16:39 +00:00
largeimm1.ll [mips] Use register number instead of name to print register $AT. 2012-11-02 21:26:03 +00:00
largeimmprinting.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
lazy-binding.ll [mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out 2013-09-28 00:12:32 +00:00
lb1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
lbu1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
lcb2.ll Check in conditional branches for constant islands. Still need to finish 2013-11-28 00:56:37 +00:00
lcb3c.ll Part 1 of 3 patches that completes very long conditional branches 2013-11-29 22:32:56 +00:00
lcb4a.ll final patch for very long conditional branches for mips16 constant islands. 2013-12-03 23:42:51 +00:00
lcb5.ll final patch for very long conditional branches for mips16 constant islands. 2013-12-03 23:42:51 +00:00
lh1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
lhu1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
lit.local.cfg [tests] Cleanup initialization of test suffixes. 2013-08-16 00:37:11 +00:00
llcarry.ll Implement carry for subtract/add for mips16 2012-10-26 04:46:26 +00:00
load-store-left-right.ll Rename test/CodeGen/Mips/load-shift-left-right.ll. 2012-06-04 17:50:36 +00:00
longbranch.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
machineverifier.ll Make machine verifier check the first instruction of the last bundle instead of 2012-06-14 20:51:13 +00:00
madd-msub.ll [mips] Fix DSP instructions to have explicit accumulator register operands. 2013-03-30 01:58:00 +00:00
mature-mc-support.ll Re-commit: Demote EmitRawText call in AsmPrinter::EmitInlineAsm() and remove hasRawTextSupport() call 2014-02-13 14:44:26 +00:00
mbrsize4a.ll Add, to constant islands, long jumps similar to ARM far branch. 2013-11-21 05:13:23 +00:00
memcpy.ll Set a higher value for maxStoresPerMemcpy in MipsISelLowering.cpp. 2012-06-13 19:33:32 +00:00
micromips-atomic.ll Fixed operand of SC microMIPS instruction. 2014-02-28 18:22:56 +00:00
micromips-directives.ll [mips] Emit '.set nomicromips' before a function's entry label 2014-04-16 11:46:59 +00:00
micromips-jal.ll Fixed issue with microMIPS JAL instruction. 2014-03-31 14:00:10 +00:00
micromips-load-effective-address.ll Test case micromips-load-effective-address.s renamed to micromips-load-effective-address.ll and moved to test/CodeGen/Mips. 2014-01-14 16:26:47 +00:00
micromips-long-branch.ll Move tests that just use llc from test/MC/Mips to test/MC/Codegen. 2014-01-26 04:08:47 +00:00
mips16_32_1.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_3.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_4.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_5.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_6.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_7.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_8.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_9.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_10.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_fpret.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
mips16-hf-attr.ll [Mips] Does not take in account 'use-soft-float' attribute's value when 2013-12-25 17:00:27 +00:00
mips16ex.ll This patch is needed to make c++ exceptions work for mips16. 2012-12-16 04:00:45 +00:00
mips16fpe.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
mips64-f128-call.ll [mips] Add a line which checks function name. Rename file. 2013-03-06 01:58:03 +00:00
mips64-f128.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64-fp-indexed-ls.ll Fix type of LUXC1 and SUXC1. These instructions were incorrectly defined as 2012-07-31 18:16:49 +00:00
mips64-libcall.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
mips64-sret.ll [mips] Print move instructions. 2013-03-04 22:25:01 +00:00
mips64countleading.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64directive.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64ext.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64extins.ll Add definitions of 64-bit extract and insert instrucions and make 2011-12-05 21:26:34 +00:00
mips64fpimm0.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64fpldst.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64imm.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64instrs.ll [mips] Fix more incorrect uses of HasMips64 and isMips64() 2014-04-14 15:44:42 +00:00
mips64intldst.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64lea.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64load-store-left-right.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64muldiv.ll [mips] Fix more incorrect uses of HasMips64 and isMips64() 2014-04-14 15:44:42 +00:00
mips64shift.ll Remove definitions of double word shift plus 32 instructions. Assembler or 2011-12-19 19:44:09 +00:00
mipslopat.ll Upgrade syntax of tests using volatile instructions to use 'load volatile' instead of 'volatile load', which is archaic. 2011-11-27 06:54:59 +00:00
misha.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
mno-ldc1-sdc1.ll [mips] Fix typos. 2013-09-07 01:14:42 +00:00
mul.ll Patch for integer multiply, signed/unsigned, long/long long. 2012-10-05 18:27:54 +00:00
mulll.ll Patch for integer multiply, signed/unsigned, long/long long. 2012-10-05 18:27:54 +00:00
mulull.ll Patch for integer multiply, signed/unsigned, long/long long. 2012-10-05 18:27:54 +00:00
nacl-align.ll Moved test file from test/MC/Mips to test/CodeGen/Mips. 2014-03-07 22:08:46 +00:00
nacl-branch-delay.ll [mips] Implement NaCl sandboxing of loads, stores and SP changes: 2014-03-10 20:34:23 +00:00
nacl-reserved-regs.ll [mips] Forbid the use of registers t6, t7 and t8 if the target is NaCl. 2014-02-07 17:16:40 +00:00
neg1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
nomips16.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
not1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
null.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
o32_cc_byval.ll [mips] Set instruction itineraries of loads, stores and conditional moves. 2013-09-06 23:28:24 +00:00
o32_cc_vararg.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
o32_cc.ll [mips] Fix a bug in function CC_MipsO32_FP64. The second double precision 2013-11-12 22:16:18 +00:00
octeon_popcnt.ll [MIPS] Add cpu octeon and some instructions 2014-03-20 11:51:58 +00:00
octeon.ll [mips] Add more Octeon cnMips instructions 2014-04-02 18:40:43 +00:00
optimize-fp-math.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
optimize-pic-o0.ll Fix regression with -O0 for mips . 2014-03-10 16:31:25 +00:00
or1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
powif64_16.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
private.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
ra-allocatable.ll TBAA: remove !tbaa from testing cases when they are not needed. 2013-08-21 22:20:53 +00:00
rdhwr-directives.ll test case for r159770. 2012-07-05 19:29:31 +00:00
rem.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
remat-immed-load.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
remu.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
return_address.ll [mips] Print move instructions. 2013-03-04 22:25:01 +00:00
return-vector.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
rotate.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
s2rem.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
sb1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
sel1c.ll [mips] Small code generation improvement for conditional operator (select) 2013-12-05 12:07:05 +00:00
sel2c.ll [mips] Small code generation improvement for conditional operator (select) 2013-12-05 12:07:05 +00:00
select.ll TBAA: remove !tbaa from testing cases if not used. 2013-04-30 17:52:57 +00:00
selectcc.ll Track IR ordering of SelectionDAG nodes 4/4. 2013-05-25 03:26:51 +00:00
seleq.ll Beginning of expanding all current mips16 macro/pseudo instruction sequences. 2013-02-18 00:59:04 +00:00
seleqk.ll Expand pseudos BteqzT8CmpiX16 and BtnezT8CmpiX16. 2013-02-19 00:20:58 +00:00
selgek.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
selgt.ll Expand pseudo/macro BteqzT8SltX16. 2013-02-18 04:04:26 +00:00
selle.ll Expand macro/pseudo instructions BtnezT8SltX16 and BtnezT8SltuX16. 2013-02-18 05:43:03 +00:00
selltk.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
selne.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
selnek.ll Convert CodeGen/*/*.ll tests to use the new CHECK-LABEL for easier debugging. No functionality change and all tests pass after conversion. 2013-07-13 20:38:47 +00:00
selpat.ll Expand pseudos/macros for Selt. This is the last of the complex 2013-02-23 03:09:56 +00:00
selTBteqzCmpi.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
selTBtnezCmpi.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
selTBtnezSlti.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
setcc-se.ll [mips] Print instructions "beq", "bne" and "or" using assembler pseudo 2013-07-26 18:34:25 +00:00
seteq.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
seteqz.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setge.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setgek.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setle.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setlt.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setltk.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setne.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setuge.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setugt.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setule.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setult.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setultk.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
sh1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
shift-parts.ll Expand 64-bit shifts if target ABI is O32. 2012-05-09 00:55:21 +00:00
simplebr.ll Change the default branch instruction to be the 16 bit variety for mips16. 2013-11-12 02:27:12 +00:00
sint-fp-store_pattern.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
sitofp-selectcc-opt.ll Test case for r160036. 2012-07-11 19:50:46 +00:00
sll1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
sll2.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
small-section-reserve-gp.ll In MipsDAGToDAGISel::SelectAddr, fold add node into address operand, if its 2012-08-24 20:21:49 +00:00
spill-copy-acreg.ll [mips] Handle reading, writing or copying of ccond field of DSP control 2013-05-02 23:07:05 +00:00
sr1.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
sra1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
sra2.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
srl1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
srl2.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
stack-alignment.ll [mips] Partially revert r193641. Stack alignment should not be determined by 2013-11-11 21:49:03 +00:00
stackcoloring.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
stacksize.ll Test case for r159240. 2012-06-27 00:40:34 +00:00
start-asm-file.ll [mips] Add initial support for NaN2008 in the back-end. 2014-04-16 15:48:55 +00:00
stchar.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
stldst.ll checking test case for r164811. was an omission to not check this in. this was already approved 2012-10-01 21:35:06 +00:00
sub1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
sub2.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
swzero.ll Don't modify MO while use_iterator is still pointing to it. 2012-08-09 22:08:24 +00:00
tail16.ll Fix a problem with mips16 stubs when calls are transformed during 2013-12-18 23:57:48 +00:00
tailcall.ll [mips] Make sure there is a chain edge dependency between loads that read 2013-11-09 02:38:51 +00:00
tls16_2.ll Implement MipsHi for mips16 2012-10-27 00:57:14 +00:00
tls16.ll implement mips16 tls global addr 2012-10-26 22:57:32 +00:00
tls-alias.ll [mips] Implement MipsTargetMachine::getInstrItineraryData(). 2013-07-12 23:33:22 +00:00
tls-models.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
tls.ll Add extra CHECK prefix to tests with explicit prefix 2014-02-16 13:28:15 +00:00
tnaked.ll Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'. 2013-08-22 21:28:54 +00:00
trap1.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
trap.ll [mips] Implement llvm.trap intrinsic. 2013-07-26 20:58:55 +00:00
uitofp.ll Fix bug 13532. 2012-08-28 02:12:42 +00:00
ul1.ll Handled unaligned load/stores properly in Mips16 2012-09-15 01:02:03 +00:00
unalignedload.ll [mips] Implement MipsTargetMachine::getInstrItineraryData(). 2013-07-12 23:33:22 +00:00
vector-load-store.ll MIPS DSP: add vector load/store patterns. 2012-09-27 01:50:59 +00:00
vector-setcc.ll [mips] MipsTargetLowering::getSetCCResultType should return a vector type if 2013-01-04 20:06:01 +00:00
weak.ll
xor1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
zeroreg.ll TBAA: remove !tbaa from testing cases if not used. 2013-04-30 17:52:57 +00:00