Eric Christopher 55a90ab4ef Add the first backend support for on demand subtarget creation ... based on the Function. This is currently used to implement mips16 support in the mips backend via the existing module pass resetting the subtarget. Things to note: a) This involved running resetTargetOptions before creating a new subtarget so that code generation options like soft-float could be recognized when creating the new subtarget. This is to deal with initialization code in isel lowering that only paid attention to the initial value. b) Many of the existing testcases weren't using the soft-float feature correctly. I've corrected these based on the check values assuming that was the desired behavior. c) The mips port now pays attention to the target-cpu and target-features strings when generating code for a particular function. I've removed these from one function where the requested cpu and features didn't match the check lines in the testcase. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218492 91177308-0d34-0410-b5e6-96231b3b80d8		2014-09-26 01:44:08 +00:00
..
cconv	[mips] Add CCValAssign::[ASZ]ExtUpper and CCPromoteToUpperBitsInType and handle struct's correctly on big-endian N32/N64 return values.	2014-09-25 12:15:05 +00:00
Fast-ISel	Add mips32 r1 to the list of supported targets for Mips fast-isel	2014-09-15 20:30:25 +00:00
llvm-ir	[mips][mips64r6] Use JALR for indirect branches instead of JR (which is not available on MIPS32r6/MIPS64r6)	2014-07-09 10:21:59 +00:00
mips32r6	[mips][mips64r6] Add experimental support for MIPS32r6 and MIPS64r6	2014-05-09 09:46:21 +00:00
mips64r6	[mips][mips64r6] Add experimental support for MIPS32r6 and MIPS64r6	2014-05-09 09:46:21 +00:00
msa	Fix fmul combines with constant splat vectors	2014-08-16 10:14:19 +00:00
2008-06-05-Carry.ll
2008-07-03-SRet.ll
2008-07-06-fadd64.ll
2008-07-07-Float2Int.ll
2008-07-07-FPExtend.ll
2008-07-07-IntDoubleConvertions.ll
2008-07-15-InternalConstant.ll
2008-07-15-SmallSection.ll
2008-07-16-SignExtInReg.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
2008-07-22-Cstpool.ll
2008-07-23-fpcmp.ll
2008-07-29-icmp.ll
2008-07-31-fcopysign.ll
2008-08-01-AsmInline.ll	[mips][mips64r6] Improve tests affected by the changes to multiplies and divides	2014-06-11 15:48:00 +00:00
2008-08-03-fabs64.ll
2008-08-03-ReturnDouble.ll
2008-08-04-Bitconvert.ll
2008-08-06-Alloca.ll
2008-08-07-CC.ll
2008-08-07-FPRound.ll
2008-08-08-bswap.ll
2008-08-08-ctlz.ll
2008-10-13-LegalizerBug.ll
2008-11-10-xint_to_fp.ll
2009-11-16-CstPoolLoad.ll	[mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler.	2014-02-20 14:58:19 +00:00
2010-07-20-Switch.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
2010-11-09-CountLeading.ll
2010-11-09-Mul.ll
2011-05-26-BranchKillsVreg.ll
2012-12-12-ExpandMemcpy.ll
2013-11-18-fp64-const0.ll	[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64	2014-06-12 11:55:58 +00:00
abicalls.ll	[mips] Invert the abicalls feature bit to be noabicalls so that it's possible for -mno-abicalls to take effect.	2014-08-08 15:47:17 +00:00
abiflags32.ll	[mips] Do not emit '.module fp=...' unless we really need to.	2014-07-21 15:25:24 +00:00
abiflags-xx.ll	[mips] Expand BuildPairF64 to a spill and reload when the O32 FPXX ABI is	2014-07-14 09:40:29 +00:00
addc.ll
addi.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
addressing-mode.ll
align16.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
alloca16.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
alloca.ll
analyzebranch.ll	[mips][mips64r6] Correct cond names in the cmp.cond.[ds] instructions	2014-07-09 10:40:20 +00:00
and1.ll
asm-large-immediate.ll
atomic.ll	Replace the result usages while legalizing cmpxchg.	2014-07-21 17:33:44 +00:00
atomicops.ll	IR: add "cmpxchg weak" variant to support permitted failure.	2014-06-13 14:24:07 +00:00
beqzc1.ll	Make all the conditional Mips 16 branches get initially set for the	2013-11-15 02:21:52 +00:00
beqzc.ll	Make all the conditional Mips 16 branches get initially set for the	2013-11-15 02:21:52 +00:00
biggot.ll
blez_bgez.ll	[mips] Make mips64 the default CPU for the mips64 architecture	2014-02-20 13:13:33 +00:00
blockaddr.ll	[mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler.	2014-02-20 14:58:19 +00:00
br-jmp.ll
brconeq.ll
brconeqk.ll
brconeqz.ll
brconge.ll
brcongt.ll
brconle.ll
brconlt.ll
brconne.ll
brconnek.ll
brconnez.ll
brdelayslot.ll
brind.ll
brsize3.ll	Take care of long short branch immediate instructions for mips16 in	2013-11-13 23:52:18 +00:00
brsize3a.ll	Take care of long short branch immediate instructions for mips16 in	2013-11-13 23:52:18 +00:00
bswap.ll	[mips] Check emitted code for llvm.bswap.i32 on MIPS16/MIPS64 and llvm.bswap.i64 on MIPS16.	2014-03-31 11:00:04 +00:00
buildpairextractelementf64.ll	[mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves	2014-07-14 12:41:31 +00:00
cache-intrinsic.ll	Add @llvm.clear_cache builtin	2014-03-26 12:52:28 +00:00
call-optimization.ll	[mips] Fix test case.	2013-12-07 02:48:29 +00:00
cfi_offset.ll	[mips] Emit two CFI offset directives per double precision SDC1/LDC1	2014-07-10 22:23:30 +00:00
check-noat.ll
ci2.ll	Fix a funny bug I introduced during conversion of ARM constant islands to Mips.	2013-11-24 02:53:09 +00:00
cmov.ll	[SDAG] Introduce a combined set to the DAG combiner which tracks nodes	2014-07-24 22:15:28 +00:00
cmplarge.ll
const1.ll
const4a.ll	Fix broken CHECK lines.	2014-01-11 21:06:00 +00:00
const6.ll	Update older test cases for latest patch.	2013-11-24 03:37:56 +00:00
const6a.ll	Adjust offsets for max load instruction offsets. This is more pessimistic	2014-01-16 00:47:46 +00:00
const-mult.ll	[mips] Make mips64 the default CPU for the mips64 architecture	2014-02-20 13:13:33 +00:00
constantfp0.ll
countleading.ll	[mips][mips64r6] Correct select patterns that have the condition or true/false values backwards	2014-07-09 10:47:26 +00:00
cprestore.ll
ctlz-v.ll	Add support for scalarizing ctlz_zero_undef	2014-07-30 00:44:03 +00:00
ctlz.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
cttz-v.ll	Add support for scalarizing cttz_zero_undef	2014-08-10 22:49:54 +00:00
DbgValueOtherTargets.test
disable-tail-merge.ll
div_rem.ll
div.ll
divrem.ll	[mips][mips64r6] Replace m[tf]hi, m[tf]lo, mult, multu, dmult, dmultu, div, ddiv, divu, ddivu for MIPS32r6/MIPS64.	2014-06-12 10:44:10 +00:00
divu_remu.ll
divu.ll
double2int.ll
dsp-patterns-cmp-vselect.ll
dsp-patterns.ll
dsp-r1.ll	[mips][mips64r6] madd/maddu/msub/msubu are not available on MIPS32r6/MIPS64r6	2014-06-12 10:54:16 +00:00
dsp-r2.ll
dsp-vec-load-store.ll
eh-dwarf-cfa.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
eh-return32.ll	[mips][mips64r6] Use JALR for returns instead of JR (which is not available on MIPS32r6/MIPS64r6)	2014-07-09 10:16:07 +00:00
eh-return64.ll	[mips][mips64r6] Use JALR for returns instead of JR (which is not available on MIPS32r6/MIPS64r6)	2014-07-09 10:16:07 +00:00
eh.ll
ehframe-indirect.ll	Fix MIPS exception personality encoding.	2014-05-30 16:48:56 +00:00
elf_eflags.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
emit-big-cst.ll
ex2.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
extins.ll
f16abs.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
fabs.ll	Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math	2014-04-09 09:56:43 +00:00
fastcc.ll	[mips] Don't use odd-numbered float registers for double arguments for fastcc	2014-08-22 09:23:22 +00:00
fcmp.ll	Make it possible for ints/floats to return different values from getBooleanContents()	2014-07-10 10:18:12 +00:00
fcopysign-f32-f64.ll	[mips] Fix fcopysign for MIPS-IV and add the test.	2014-04-14 16:24:12 +00:00
fcopysign.ll	[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64	2014-06-12 11:55:58 +00:00
fixdfsf.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
fmadd1.ll	[mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64	2014-06-12 11:55:58 +00:00
fneg.ll	Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math	2014-04-09 09:56:43 +00:00
fp16instrinsmc.ll	Add the first backend support for on demand subtarget creation	2014-09-26 01:44:08 +00:00
fp16mix.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
fp16static.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
fp64a.ll	[mips] For the FP64A ABI, odd-numbered double-precision moves must not use mtc1/mfc1.	2014-07-14 13:08:14 +00:00
fp-indexed-ls.ll	[mips][mips64r6] [sl][duw]xc1 are not available on MIPS32r6/MIPS64r6	2014-06-12 14:19:28 +00:00
fp-spill-reload.ll
fpbr.ll	[mips][mips64r6] bc1[tf] are not available on MIPS32r6/MIPS64r6	2014-06-12 15:00:17 +00:00
fpneeded.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
fpnotneeded.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
fptr2.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
fpxx.ll	[mips] For the FP64A ABI, odd-numbered double-precision moves must not use mtc1/mfc1.	2014-07-14 13:08:14 +00:00
frame-address.ll
frem.ll
global-address.ll	[mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler.	2014-02-20 14:58:19 +00:00
global-pointer-reg.ll
gpreg-lazy-binding.ll
gprestore.ll
helloworld.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
hf1_body.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
hf16_1.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
hf16call32_body.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
hf16call32.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
hfptrcall.ll	Add the first backend support for on demand subtarget creation	2014-09-26 01:44:08 +00:00
i32k.ll	Check in conditional branches for constant islands. Still need to finish	2013-11-28 00:56:37 +00:00
i64arg.ll	[mips] Make sure there is a chain edge dependency between loads that read	2013-11-09 02:38:51 +00:00
imm.ll
indirectcall.ll
init-array.ll	Replace -use-init-array with -use-ctors.	2014-09-02 13:54:53 +00:00
inlineasm64.ll
inlineasm_constraint.ll	[mips] Change lwl and lwr in inlineasm_constraint.ll to lw	2014-05-22 11:51:06 +00:00
inlineasm-cnstrnt-bad-I-1.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-J.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-K.ll
inlineasm-cnstrnt-bad-L.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-N.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-O.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-P.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-reg64.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-reg.ll	[mips][mips64r6] Improve tests affected by the changes to multiplies and divides	2014-06-11 15:48:00 +00:00
inlineasm-operand-code.ll	[mips] Use addiu in inline assembly tests since addi is not available in all ISA's	2014-05-22 11:46:58 +00:00
inlineasmmemop.ll
int-to-float-conversion.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
internalfunc.ll
jtstat.ll
l3mc.ll	This patch has two main functions:	2014-02-14 19:16:39 +00:00
largeimm1.ll
largeimmprinting.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
lazy-binding.ll
lb1.ll
lbu1.ll
lcb2.ll	Check in conditional branches for constant islands. Still need to finish	2013-11-28 00:56:37 +00:00
lcb3c.ll	Part 1 of 3 patches that completes very long conditional branches	2013-11-29 22:32:56 +00:00
lcb4a.ll	final patch for very long conditional branches for mips16 constant islands.	2013-12-03 23:42:51 +00:00
lcb5.ll	final patch for very long conditional branches for mips16 constant islands.	2013-12-03 23:42:51 +00:00
lh1.ll
lhu1.ll
lit.local.cfg	Reduce verbiage of lit.local.cfg files	2014-06-09 22:42:55 +00:00
llcarry.ll
load-store-left-right.ll	[mips][mips64r6] [ls][dw][lr] are not available in MIPS32r6/MIPS64r6	2014-05-23 13:18:02 +00:00
longbranch.ll	[mips] Modify long branch for NaCl:	2014-06-05 13:52:08 +00:00
machineverifier.ll
madd-msub.ll	[mips][mips64r6] madd/maddu/msub/msubu are not available on MIPS32r6/MIPS64r6	2014-06-12 10:54:16 +00:00
mature-mc-support.ll	Re-commit: Demote EmitRawText call in AsmPrinter::EmitInlineAsm() and remove hasRawTextSupport() call	2014-02-13 14:44:26 +00:00
mbrsize4a.ll	Add, to constant islands, long jumps similar to ARM far branch.	2013-11-21 05:13:23 +00:00
memcpy.ll
micromips-atomic.ll	Fixed operand of SC microMIPS instruction.	2014-02-28 18:22:56 +00:00
micromips-directives.ll	[mips] Emit '.set nomicromips' before a function's entry label	2014-04-16 11:46:59 +00:00
micromips-jal.ll	Fixed issue with microMIPS JAL instruction.	2014-03-31 14:00:10 +00:00
micromips-load-effective-address.ll	Test case micromips-load-effective-address.s renamed to micromips-load-effective-address.ll and moved to test/CodeGen/Mips.	2014-01-14 16:26:47 +00:00
mips16_32_1.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_3.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_4.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_5.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_6.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_7.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_8.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_9.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_32_10.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
mips16_fpret.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
mips16-hf-attr.ll	[Mips] Does not take in account 'use-soft-float' attribute's value when	2013-12-25 17:00:27 +00:00
mips16ex.ll	Print a=b as an assignment.	2014-06-24 22:45:16 +00:00
mips16fpe.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
mips64-f128-call.ll
mips64-f128.ll	[mips][mips64r6] Correct select patterns that have the condition or true/false values backwards	2014-07-09 10:47:26 +00:00
mips64-libcall.ll
mips64-sret.ll	Allow sret on the second parameter as well as the first	2014-05-09 22:32:13 +00:00
mips64directive.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64ext.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64extins.ll
mips64fpimm0.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64fpldst.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64imm.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64instrs.ll	[mips][mips64r6] cl[oz], and dcl[oz] are re-encoded in MIPS32r6/MIPS64r6	2014-06-16 13:18:59 +00:00
mips64intldst.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64lea.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
mips64muldiv.ll	[mips][mips64r6] Replace m[tf]hi, m[tf]lo, mult, multu, dmult, dmultu, div, ddiv, divu, ddivu for MIPS32r6/MIPS64.	2014-06-12 10:44:10 +00:00
mips64shift.ll
mipslopat.ll
misha.ll
mno-ldc1-sdc1.ll	[mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves	2014-07-14 12:41:31 +00:00
mul.ll
mulll.ll
mulull.ll
nacl-align.ll	Moved test file from test/MC/Mips to test/CodeGen/Mips.	2014-03-07 22:08:46 +00:00
nacl-branch-delay.ll	[mips] Implement NaCl sandboxing of loads, stores and SP changes:	2014-03-10 20:34:23 +00:00
nacl-reserved-regs.ll	[mips] Forbid the use of registers t6, t7 and t8 if the target is NaCl.	2014-02-07 17:16:40 +00:00
neg1.ll
no-odd-spreg.ll	[mips] Do not emit '.module [no]oddspreg' unless we really need to.	2014-07-21 10:45:47 +00:00
nomips16.ll	Add the first backend support for on demand subtarget creation	2014-09-26 01:44:08 +00:00
not1.ll
null-streamer.ll	[Mips] Add a target streamer when creating a null streamer.	2014-06-23 19:43:40 +00:00
null.ll	Fix a low hanging use of hasRawTextSupport.	2014-01-14 18:57:12 +00:00
o32_cc_byval.ll
o32_cc_vararg.ll
o32_cc.ll	[mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves	2014-07-14 12:41:31 +00:00
octeon_popcnt.ll	[mips] Improve robustness of some tests.	2014-08-14 13:10:48 +00:00
octeon.ll	[mips] Add more Octeon cnMips instructions	2014-04-02 18:40:43 +00:00
optimize-fp-math.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
optimize-pic-o0.ll	Fix regression with -O0 for mips .	2014-03-10 16:31:25 +00:00
or1.ll
powif64_16.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
prevent-hoisting.ll	Prevent hoisting the instruction whose def might be clobbered by the terminator.	2014-06-05 13:42:48 +00:00
private.ll
ra-allocatable.ll
rdhwr-directives.ll
rem.ll
remat-immed-load.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
remu.ll
return_address.ll
return-vector.ll
rotate.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
s2rem.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
sb1.ll
sel1c.ll	[mips] Small code generation improvement for conditional operator (select)	2013-12-05 12:07:05 +00:00
sel2c.ll	[mips] Small code generation improvement for conditional operator (select)	2013-12-05 12:07:05 +00:00
select.ll	Make it possible for ints/floats to return different values from getBooleanContents()	2014-07-10 10:18:12 +00:00
selectcc.ll	[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6	2014-06-12 13:39:06 +00:00
seleq.ll	Add the first backend support for on demand subtarget creation	2014-09-26 01:44:08 +00:00
seleqk.ll
selgek.ll
selgt.ll
selle.ll
selltk.ll
selne.ll
selnek.ll
selpat.ll
selTBteqzCmpi.ll
selTBtnezCmpi.ll
selTBtnezSlti.ll
setcc-se.ll
seteq.ll
seteqz.ll
setge.ll
setgek.ll
setle.ll
setlt.ll
setltk.ll
setne.ll
setuge.ll
setugt.ll
setule.ll
setult.ll
setultk.ll
sh1.ll
shift-parts.ll
simplebr.ll	Change the default branch instruction to be the 16 bit variety for mips16.	2013-11-12 02:27:12 +00:00
sint-fp-store_pattern.ll	[mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point	2014-04-14 16:00:28 +00:00
sitofp-selectcc-opt.ll
sll1.ll
sll2.ll
small-section-reserve-gp.ll
spill-copy-acreg.ll
sr1.ll	Last change for mips16 prolog/epilog cleanup and optimization.	2013-12-15 20:49:30 +00:00
sra1.ll
sra2.ll
srl1.ll
srl2.ll
stack-alignment.ll	[mips] Partially revert r193641. Stack alignment should not be determined by	2013-11-11 21:49:03 +00:00
stackcoloring.ll
stacksize.ll
start-asm-file.ll	[mips] Remove reason for XFAIL from a test that isn't actually XFAILed.	2014-08-08 12:58:17 +00:00
stchar.ll
stldst.ll
sub1.ll
sub2.ll
swzero.ll
tail16.ll	Fix a problem with mips16 stubs when calls are transformed during	2013-12-18 23:57:48 +00:00
tailcall.ll	[mips] Make sure there is a chain edge dependency between loads that read	2013-11-09 02:38:51 +00:00
tls16_2.ll
tls16.ll
tls-alias.ll	[pr19844] Add thread local mode to aliases.	2014-05-28 18:15:43 +00:00
tls-models.ll
tls.ll	Add extra CHECK prefix to tests with explicit prefix	2014-02-16 13:28:15 +00:00
tnaked.ll
trap1.ll	[Mips] Adjust float ABI settings in case of MIPS16 mode.	2013-11-19 12:20:17 +00:00
trap.ll
uitofp.ll
ul1.ll
unalignedload.ll	[mips][mips64r6] [ls][dw][lr] are not available in MIPS32r6/MIPS64r6	2014-05-23 13:18:02 +00:00
vector-load-store.ll
vector-setcc.ll
weak.ll
xor1.ll
zeroreg.ll	[mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6	2014-06-12 13:39:06 +00:00