binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
This patch annotates the following SPARC instructions as VIS3B
instructions: ldx *, %efsr, fpadd64, fpsub64, fpcmpule8, fpcmpune8,
fpcmpugt8, fpcmpueq8. It also improves the documentation of the VIS3B
capability in several headers.
Tested in sparc64-unknown-linux-gnu and sparc-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Annotate several instructions with
the HWCAP2_VIS3B hwcap.
include/opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (HWCAP2_VIS3B): Documentation improved.
include/elf/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (ELF_SPARC_HWCAP2_VIS3B): Documentation improved.
This patch fixes the hwcap entries in `sparc-opcodes' (which were
incorrectly located in the flags field) for the following
instructions:
wr r,r,%sys_tick
wr r,i,%sys_tick
wr r,r,%sys_tick_cmpr
wr r,i,%sys_tick_cmpr
edge8n edge8ln edge16n edge16ln edge32n edge32ln
bmask bshuffle siam
Tested in sparc-unknown-linux-gnu and sparc64-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Fix several misplaced hwcap
entries.
First, add nds32 audio ISA extension including opcodes and registers.
Second, redesign the disassemble implement.
The original disassemble decode instruction opcode using switch-case.
It is hard to synchronize when adding new instructions.
Therefore, the new implement reuses nds32_opcodes to dump the instructions.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
This change moves the microMIPS 10-bit uninterpreted immediate code
embedded at bits 25..16 in the SYSCALL, WAIT, SDBBP and HYPCALL
instructions from `B' over to `+J' which is the operand code used in
the standard MIPS instruction set for a similar code embedded at bits
20..11, currently used by HYPCALL only in that set.
opcodes/
* micromips-opc.c (decode_micromips_operand): Rename `B' to `+J'.
(micromips_opcodes): Use "+J" in place of "B" for "hypcall",
"sdbbp", "syscall" and "wait".
include/opcode/
* mips.h: Document the move of `MICROMIPSOP_*_CODE10' from `B'
over to `+J'.
2014-08-21 Nathan Sidwell <nathan@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
opcodes/
* arm-dis.c (print_arm_address): Negate the GPR-relative offset
returned if the U bit is set.
2014-08-21 Paul Brook <paul@codesourcery.com>
gas/testsuite/
* gas/arm/arch7a-mp.d: Adjust according to `print_arm_address'
offset fix.
* gas/arm/arch7r-mp.d: Likewise.
The 48-bit LI instruction encoding has been removed from the microMIPS
ISA and no implementation ever made that included it.
* micromips-opc.c (micromips_opcodes): Remove #ifdef-ed out
48-bit "li" encoding.
readability and also fixes some minor issues.
S/390: Split disassembler routine into smaller functions
S/390: Fix disassembler's treatment of signed/unsigned operands
S/390: Fix off-by-one error in disassembler initialization
S/390: Simplify opcode search loop in disassembler
S/390: Drop function pointer dereferences in disassembler
S/390: Various minor simplifications in disassembler
These multiple if statements can be condensed down into a single if
statement and an array of strings.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The variables used to track insn state should be pushed down into the
private_data structure to avoid pollution across calls.
This also happens to fix the output when hitting comments/invalid insns
which needs to tweak a gas test.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
If the user gives us an unaligned PC, then dump an error as such.
Otherwise if you try to disassemble at an odd address, the output
will look weird (it'll read one byte earlier).
This can be seen in one of the gas tests where data is in the middle
of .text, so move the data to .data like it should be in the first place.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current code ignores memory read errors which isn't a great idea.
So add a helper function which takes care of error checking and update
the code to use that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gas/
* config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
include/opcode/
* mips.h (INSN_LOAD_COPROC_DELAY): Rename to...
(INSN_LOAD_COPROC): New define.
(INSN_COPROC_MOVE_DELAY): Rename to...
(INSN_COPROC_MOVE): New define.
opcodes/
* micromips-opc.c (COD): Rename throughout to...
(CM): New define, update to use INSN_COPROC_MOVE.
(LCD): Rename throughout to...
(LC): New define, update to use INSN_LOAD_COPROC.
* mips-opc.c: Likewise.
Even though the opcodes were defined for these instructions,
the actual instruction definitions were lacking.
cpu/
* or1korbis.cpu (l-msync, l-psync, l-csync): New instructions.
opcodes/
* or1k-desc.c, * or1k-desc.h, * or1k-opc.c, * or1k-opc.h,
* or1k-opinst.c: Regenerate.
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
There are legitimate reasons to allow a signed value in a cmpli insn
field, for example to test for a "stw r1,lock@sdarel(r13)" instruction
in user code, a kernel might use
subis r3,r3,STW_R1_0R13@ha # subtract off high part
cmplwi r3,lock@sdarel # is low part accessing lock?
Since the lock@sdarel may take a range of -32768 to 32767,
the allowed range of cmpli immediate must be at least [-32768,65535].
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Treat field of cmpli
insn as a bitfield; Use complain_overflow_bitfield.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
opcodes/
* ppc-opc.c (UISIGNOPT): Define and use with cmpli.
gas/
* config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
in 64-bit mode.
gold/
* powerpc.cc (relocate): Treat field of cmpli insn as a bitfield.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
