This reference was left over when the envvar was removed.
Fixes: 231ccb6100 ("docs: Remove no-longer-accurate text about the xlib driver")
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19593>
(cherry picked from commit 9bfa939a5e6377efe7b610dd9b6846edeb0fdafc)
This extension was removed back in 2016, but it seems we left a mention
of it in the docs.
The entire section with this extension seems kinda pointless now, so
let's drop it entirely.
Fixes: f3e23ead53 ("egl: remove remnants of MESA_drm_display")
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19719>
(cherry picked from commit 9f2c9e4c3fa57deba3da30dfa8e022c0a49c80f0)
In linear PE mode the early and late depth stage do not only disagree
about the cache layout, but they seem to fundamentally disagree about
the buffer layout. When Z was written via the late stage, early tests
always show spurious zfails, even if they are not in the same draw
call. Cache flushing and pipe stalls don't help in that case.
The only option to get reliable Z tests with linear render targets is
to move all Z handling into the PE stage. Even when early Z writes
are possible, we don't know if any other draw to the same surface
needs late Z handling, so we must never use the early stage.
Fixes: 53445284a4 ("etnaviv: add linear PE support")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19686>
(cherry picked from commit 7fe91c9f660f3b76e2c08c0824d226417231c822)
Add negative value is possible to wrap around. I haven't seen this
"nuw" causes any problem yet, but let's remove it for safe.
Fixes: 60ac5dda82 ("ac: Add NIR lowering for NGG GS.")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19718>
(cherry picked from commit c21e184cc5cc818285c5590f36b170362defaf27)
We should not use "nuw" here as negative add positive may wrap
around (negative is 0xffffff??).
This problem can be observed with LLVM15 (I can't see when LLVM14):
%.neg = mul nsw i32 %31, -4
%163 = add nuw nsw i32 %.neg, 16
%164 = lshr i32 257, %.neg
%165 = lshr i32 %164, %163
LLVM just assume %.neg is possitive, so pre-shift 0x01010101 by 16.
This get wrong value because we can't get back the shifted bits with
a negative shift right.
Fixes: 75dbb40439 ("ac/nir: Remove byte permute from prefix sum of the repack sequence.")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19718>
(cherry picked from commit 982b523769a75c99039deac7f832a1e10260e916)
This fixes GALLIVM_DEBUG=asm for compute shaders, changing
the hooks after dumping causes a segfault because the
memory has already been finalised. Just add the hooks always,
and before dumping anything.
Fixes: f511d2a553 ("gallivm: rework coroutine malloc/free callouts.")
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19714>
(cherry picked from commit fb7de303ba7cbdb4237d2ae93011bc2845114d35)
Per Ken suggestion, use ascending order for the start offset.
Fixes: 6d28c6e52c ("i965: Select ranges of UBO data to be uploaded as push constants.")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19731>
(cherry picked from commit 494e2edb90d06f645e09b10d2c3f6b8d274d4dba)
The code builds up the dynamic array of objects (spirv_objs) and
collect pointers to each of them into another dynamic
array (spirv_ptr_objs).
If the growth of the first array cause a reallocation, it is
possible that the previous pointers end up invalid.
Fixes: 77e929a527 ("intel/clc: allow multiple CL files to be compiled together")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19730>
(cherry picked from commit 9fd1d47aa0f19fac30d29e6ae40ed0383c1930ee)
Age of Empire IV generates a shader of ~2.3Mb on DG2 which is above
the limit we currently have.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Acked-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19669>
(cherry picked from commit ae76bba34a878dbd299f911bceaa9acdf01eb38a)
Seems the intention was to check that both flags were not enabled
instead we were checking that the floor flag was both set and not
set so the result would always be false.
Fixes: 3749a6ecd2 ("nir: honor lower_double options for ffloor and ffract")
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19642>
(cherry picked from commit 34c52d8cb98e74a9debcd2605b377170c025582a)
We were resetting the BO struct right before dumping its data. Fix
this by moving the reset later.
Fixes: 44fa8304d4 ('v3dv: add a refcount mechanism to BOs')
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19672>
(cherry picked from commit 2c44597181e28b05d4b269ee73d4f3a59bc0a806)
If we're in handle_collect()'s dst allocation and are part of a merge set
near the end of the file, our check for reg_elem_size(reg) would let us
use the preferred reg when that would immediately lead to
allocate_dst_fixed() creating an interval extending thruogh reg_size(reg)
that overflows the file.
Avoids a regression on gfxbench5/gl_5_high_off/17.shader_test in the next
commit. No change on shader-db.
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18946>
(cherry picked from commit a39113b616099a7bcce9e62337731f040c7cad64)
If an application was transitioning out of fullscreen exclusive
display mode, the wsi_display_connector->active state was not
reset in vkReleaseDisplay() from fullscreen. When the app then
later tried to go to fullscreen display mode again on the same
display output with the same video mode, this caused
_wsi_display_queue_next() to skip a required drmModeSetCrtc()
during the first vkQueuePresent() after entering direct display
mode.
While this often worked by pure luck on a single-display setup,
it goes sideways on a multi-display setup where the viewport
of the associated crtc does not have a (x,y) offset of (0,0).
E.g., XOrg/X11 RandR output leasing of an output whose viewport
starts at x = 1920:
1. X-Server has RandR outputs viewport at x = 1920, in a shared
framebuffer, shared across all crtc's on a X-Screen.
2. Application leases that output for direct display mode,
1st vkQueuePresent() triggers drmModeSetCrtc() of output
to (x,y) = 0,0, as required for Vulkan/wsi/direct framebuffer
setup.
3. Application does rendering and presenting.
4. Application vkReleaseDisplay() the output, terminates the
RandR lease. X-Server takes over again.
5. X-Server modesets to reconfigure output back to viewport
with (x,y) = 1920, 0.
6. Application leases same output again later on, and tries
vkQueuePresent() again. Because of the bug fixed in this
commit, the required drmModeSetCrtc() to (x,y) = 0,0 is
erroneously skipped due to the stale cached connector state.
7. drmModePageflip() fails due to the wrong crtc viewport
(x,y) = 1920, 0, mismatched for the need of the Vulkan
framebuffer of (x,y) = 0,0. Kernel returns -ENOSPACE,
Swapchain goes into permanent VK_ERROR_SURFACE_LOST state.
Destroying and recreating the swapchain, as recommended
by the Vulkan spec for error handling won't help. Game over!
Resetting wsi_display_connector->active = false; fixes the
problem of wrong / stale connector state and Vulkan/wsi/display
clients are happy on multi-display setups again, as tested
in various single- and multi-display configurations.
This bug affects all Mesa releases with Vulkan/WSI/Display
support and should therefore be backported.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Fixes: 352d320a07 ("vulkan: Add EXT_direct_mode_display [v2]")
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19484>
(cherry picked from commit 24094ee03d625fbcd2d154e8c2dd5434ba88f166)
Implement Wa_1508744258:
Disable RHWO by setting 0x7010[14] by default except during resolve
pass.
Disable the RCC RHWO optimization at all times except when resolving
single sampled color surfaces.
v2: Move stalling to genX(cmd_buffer_apply_pipe_flushes) for clarity (Mark)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Mark Janes <markjanes@swizzler.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: mesa-stable
(cherry picked from commit ba0336ab3f69f958e4346c1465c2fe0859d4ac59)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19671>
Implement Wa_1508744258:
Disable RHWO by setting 0x7010[14] by default except during resolve
pass.
Disable the RCC RHWO optimization at all times except when resolving
single sampled color surfaces. MCS partial resolves are done via
software (i.e., not via a HW bit) and so are not expected to need this
workaround.
Reviewed-by: Mark Janes <markjanes@swizzler.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 0fa540ef6137aa235f62a0ba60886f64d754566d)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19671>
Some previous commits changed .gitlab-ci.yml, so the `test-docs-mr` was
triggered. It failed due to the lack of toctree reference in
documentation, even when the relnotes for 22.2.0 to 22.2.3 exist.
This commit fixes that to make the CI pipeline green again.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19604>
We don't need to login anymore, but we can't use plain minio commands
now. `ci-fairy` got a helper as `s3cp` to keep an almost identical
API.
Solved Conflicts:
.gitlab-ci/common/init-stage2.sh
.gitlab-ci/container/lava_build.sh
.gitlab-ci/prepare-artifacts.sh
src/amd/ci/traces-amd.yml
src/freedreno/ci/traces-freedreno.yml
src/gallium/frontends/lavapipe/ci/traces-lavapipe.yml
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
(cherry picked from commit 67cee534a88c95a8eb6839f7bcf28a5e6dac8fbf)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19604>
ci-fairy is pulverized in possible different versions at Mesa CI.
This commit updates all of them to the version that migrates minio to
s3.
Also, trigger the build of base and test containers, as both uses
ci-fairy as well
Solved Conflicts:
.gitlab-ci/image-tags.yml
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
(cherry picked from commit a04ed2f971dccbf8b24f084ac9baaf8b299944a0)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19604>
With new S3 support, we can use JWT-only server interaction via the
removal of `role-session` and `minio-host` arguments from PIGLIT_ARGS in
YAML.
This parameter change will come in a later commit.
Solved Conflicts:
.gitlab-ci/container/build-piglit.sh
.gitlab-ci/image-tags.yml
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
(cherry picked from commit 70ce1dcacc92a816322082c8695569b6a91a1810)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19604>
