revert the directory move

CVSROOT/checkoutlist

@@ -1,15 +0,0 @@
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#	[<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'
-new_commit_prep	Error checking out/updating CVSROOT/new_commit_prep
-new_log_accum	Error checking out/updating CVSROOT/new_log_accum

CVSROOT/commitinfo

@@ -1,17 +0,0 @@
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
-DEFAULT	$CVSROOT/CVSROOT/new_commit_prep
-CVSROOT	$CVSROOT/CVSROOT/new_commit_prep

CVSROOT/config

@@ -1,14 +0,0 @@
-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Put CVS lock files in this directory rather than directly in the repository.
-#LockDir=/var/lock/cvs
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no
-
-# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the
-# history file, or a subset as needed (ie `TMAR' logs all write operations)
-#LogHistory=TOFEWGCMAR

CVSROOT/cvswrappers

@@ -1,23 +0,0 @@
-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard	[option value][option value]...
-#
-#  where option is one of
-#  -f		from cvs filter		value: path to filter
-#  -t		to cvs filter		value: path to filter
-#  -m		update methodology	value: MERGE or COPY
-#  -k		expansion mode		value: b, o, kkv, &c
-#
-#  and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'

CVSROOT/editinfo

@@ -1,21 +0,0 @@
-# The "editinfo" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

CVSROOT/loginfo

@@ -1,30 +0,0 @@
-# The "loginfo" file controls where "cvs commit" log information
-# is sent.  The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT.  If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter.  The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators.  The format
-# characters are:
-#
-#   s = file name
-#   V = old version number (pre-checkin)
-#   v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
-
-DEFAULT $CVSROOT/CVSROOT/new_log_accum -m [email protected] %{sVv}
-CVSROOT $CVSROOT/CVSROOT/new_log_accum -m [email protected] %{sVv}
-

CVSROOT/modules

@@ -1,26 +0,0 @@
-# Three different line formats are valid:
-#	key	-a    aliases...
-#	key [options] directory
-#	key [options] directory files...
-#
-# Where "options" are composed of:
-#	-i prog		Run "prog" on "cvs commit" from top-level of module.
-#	-o prog		Run "prog" on "cvs checkout" of module.
-#	-e prog		Run "prog" on "cvs export" of module.
-#	-t prog		Run "prog" on "cvs rtag" of module.
-#	-u prog		Run "prog" on "cvs update" of module.
-#	-d dir		Place module in directory "dir" instead of module name.
-#	-l		Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.

CVSROOT/new_commit_prep

@@ -1,104 +0,0 @@
-#!/usr/bin/perl -w
-#
-# Copyright (C) 2000 by Kevin L. Mitchell <[email protected]>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-#
-# Script to store the last visited directory for newlogaccum.pl.
-#
-# $Id: new_commit_prep,v 1.1 2002-08-11 23:05:15 drevil Exp $
-
-use strict;
-
-# This routine removes everything in a directory
-sub clear_dir {
-    my ($dir) = @_;
-    my ($file);
-
-    opendir(DIR, $dir) || die "Cannot clear directory $dir: $!";
-    while ($file = readdir(DIR)) {
-	next
-	    if ($file eq "." || $file eq "..");
-
-	$file = "$dir/$file";
-
-	if (-d $file) {
-	    # It's a directory, recurse into it, then delete it.
-	    clear_dir($file);
-	    rmdir($file);
-	} else {
-	    # It's a file, delete it.
-	    unlink($file);
-	}
-    }
-    closedir(DIR);
-}
-
-# This routine prepares a temporary directory, hopefully in a secure
-# fashion; it uses the process group to make secondary programs be able
-# to find it.
-sub tmpdir (;$) {
-    my ($clear) = @_;
-    my ($pgrp, $own, $mode, $tmpdir);
-
-    $pgrp = getpgrp();
-
-    die "Don't run $0 setuid!"
-	unless ($< == $>);
-
-    # Decide on the directory name, using various environment variables
-    $tmpdir = ($ENV{TMPDIR} || $ENV{TMP} || $ENV{TEMP} || "/tmp") .
-	"/.#cvs.$pgrp";
-
-    # Doesn't exist, but we can't create it...
-    die "Can't create temporary directory $tmpdir: $!"
-	unless (-e $tmpdir || mkdir($tmpdir, 0700));
-
-    die "Temporary directory $tmpdir is not a directory"
-	unless (-d $tmpdir);
-
-    # Check ownership and permissions
-    (undef, undef, $mode, undef, $own, undef) = stat($tmpdir);
-
-    die "Temporary directory $tmpdir not owned by $< (owned by $own)"
-	unless ($own == $<);
-
-    die "Temporary directory $tmpdir group-writable"
-	if ($mode & 0020);
-    die "Temporary directory $tmpdir other-writable"
-	if ($mode & 0002);
-
-    # If we're supposed to clear the directory, do so...
-    clear_dir($tmpdir)
-	if ($clear);
-
-    return $tmpdir;
-}
-
-# This routine writes a single line to a file
-sub write_line ($$) {
-    my ($fname, $line) = @_;
-
-    open(FILE, ">$fname") || die "Cannot open file $fname for writing";
-    print FILE "$line\n";
-    close(FILE);
-}
-
-# Create and empty the temporary directory
-my ($tmpdir) = (tmpdir(1));
-
-# Store the directory name
-write_line("$tmpdir/lastdir", shift(@ARGV));

CVSROOT/new_log_accum

@@ -1,757 +0,0 @@
-#!/usr/bin/perl -w
-#
-# Copyright (C) 2000 by Kevin L. Mitchell <[email protected]>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-#
-# Script to accumulate log messages for an entire tree and send them along
-# with the diffs; deals correctly with all manner of branching (I hope)
-#
-# $Id: new_log_accum,v 1.1 2002-08-11 23:05:15 drevil Exp $
-#
-
-use strict;
-
-use vars qw($MAILER $CVS $debug $boundary);
-use MD5;
-
-# Set this to the full path of a mailer that takes a list
-# of email addresses as arguments...
-$MAILER = "/usr/sbin/sendmail -oi -oeq";
-
-# Set this to the path of the CVS binary responsible for this tree...
-$CVS = "/usr/bin/cvs";
-
-# Don't touch this; use the -d command line option
-$debug = 0;
-
-# This is initialized by build_mailheader()
-$boundary = '';
-
-use POSIX qw(setsid);
-
-# We have to dissociate from our parent, so that the CVS commit can
-# complete, before we try to extract the diffs
-sub daemonize {
-    defined(my $pid = fork()) || die "Can't fork: $!";
-    exit(0)
-	if $pid;
-    setsid() || die "Can't start a new session: $!";
-}
-
-# Debugging output
-sub debug (@) {
-    print STDERR @_
-	if ($debug);
-}
-
-# Constants used in the FSM below for parsing the log message
-sub STATE_NONE     { 0 }
-sub STATE_MODIFIED { 1 }
-sub STATE_ADDED    { 2 }
-sub STATE_REMOVED  { 3 }
-sub STATE_LOG1     { 4 }
-sub STATE_LOG2     { 5 }
-
-# This routine removes everything in a directory
-sub clear_dir {
-    my ($dir) = @_;
-    my ($file);
-
-    opendir(DIR, $dir) || die "Cannot clear directory $dir: $!";
-    while ($file = readdir(DIR)) {
-	next
-	    if ($file eq "." || $file eq "..");
-
-	$file = "$dir/$file";
-
-	if (-d $file) {
-	    # It's a directory, recurse into it, then delete it.
-	    clear_dir($file);
-	    rmdir($file);
-	} else {
-	    # It's a file, delete it.
-	    unlink($file);
-	}
-    }
-    closedir(DIR);
-}
-
-# This routine prepares a temporary directory, hopefully in a secure
-# fashion; it uses the process group to make secondary programs be able
-# to find it.
-sub tmpdir (;$) {
-    my ($clear) = @_;
-    my ($pgrp, $own, $mode, $tmpdir);
-
-    $pgrp = getpgrp();
-
-    die "Don't run $0 setuid!"
-	unless ($< == $>);
-
-    # Decide on the directory name, using various environment variables
-    $tmpdir = ($ENV{TMPDIR} || $ENV{TMP} || $ENV{TEMP} || "/tmp") .
-	"/.#cvs.$pgrp";
-
-    # Doesn't exist, but we can't create it...
-    die "Can't create temporary directory $tmpdir: $!"
-	unless (-e $tmpdir || mkdir($tmpdir, 0700));
-
-    die "Temporary directory $tmpdir is not a directory"
-	unless (-d $tmpdir);
-
-    # Check ownership and permissions
-    (undef, undef, $mode, undef, $own, undef) = stat($tmpdir);
-
-    die "Temporary directory $tmpdir not owned by $< (owned by $own)"
-	unless ($own == $<);
-
-    die "Temporary directory $tmpdir group-writable"
-	if ($mode & 0020);
-    die "Temporary directory $tmpdir other-writable"
-	if ($mode & 0002);
-
-    # If we're supposed to clear the directory, do so...
-    clear_dir($tmpdir)
-	if ($clear);
-
-    return $tmpdir;
-}
-
-# Routine to remove the temporary directory when done
-sub cleanup_dir ($) {
-    # If we're debugging, we may want to look at the contents...
-    return
-	if ($debug);
-
-    clear_dir($_[0]);
-    rmdir($_[0]);
-}
-
-# Retrieve a single line from a specified file
-sub get_line ($) {
-    my ($fname) = @_;
-
-    open(FILE, "<$fname") || die "Cannot open file $fname for reading";
-    my $line = <FILE>;
-    close(FILE);
-
-    # Chomp off the \n
-    chomp $line;
-
-    return $line;
-}
-
-# Routine that only allows one value to be pushed on the array;
-# implemented by making the first element of the array a hash-reference.
-# When we add a new value, we also increment the count of an element in
-# the hash with the key being the array value...
-sub push_once (\@@) {
-    my ($array, @values) = @_;
-
-    # If the array is empty, create our hash ref
-    push @{$array}, {}
-	if (@{$array} == 0);
-
-    foreach my $value (@values) {
-	push @{$array}, $value
-	    if (!exists($array->[0]{$value}));
-
-	$array->[0]{$value}++;
-    }
-
-    return @{$array} - 1;
-}
-
-# Filter //, /./, and remove leading ./ or / from filenames
-sub fname_filter ($) {
-    my ($fname) = @_;
-
-    $fname =~ s,//,/,g;
-    $fname =~ s,/\./,/,g;
-    $fname =~ s,^\.?/,,g;
-
-    return $fname;
-}
-
-# Store file data in a temporary file
-sub names_to_file ($$@) {
-    my ($fname, $dir, @names) = @_;
-
-    if (@names > 0) {
-	open(FILE, ">>$fname") || die "Cannot open file $fname for appending";
-
-	# Store the directory data
-	print FILE "D $dir\n";
-
-	foreach my $name (@names) {
-	    # Mark record as a file...
-	    print FILE "F ";
-
-	    # Store the tag, if there is one...
-	    print FILE "$name->{tag}"
-		if (defined($name->{tag}));
-
-	    # Then store old revision, new revision, and file name
-	    print FILE ":$name->{old}:$name->{new}:$name->{file}\n";
-	}
-
-	close(FILE);
-    }
-}
-
-# Retrieve file data from temporary file; updates branch tags with what it
-# reads
-sub file_to_names (\@$) {
-    my ($btags, $fname) = @_;
-    my ($dir) = (undef);
-    my (@names) = ();
-
-    debug "Reading file names from $fname...\n";
-
-    # We may not have, say, added a file in this subdirectory...
-    return ()
-	if (!-e $fname);
-
-    open(FILE, "<$fname");
-    while(<FILE>) {
-	chomp;
-
-	# Get record type...
-	my ($type, $data) = split(' ', $_, 2);
-
-	# ok, it's a directory, remember that...
-	if ($type eq "D") {
-	    $dir = $data;
-
-	    debug "Read directory $dir\n";
-
-	    next;
-	}
-
-	debug "Read file $data\n";
-
-	# Get all the information about the file
-	my ($tag, $old, $new, $file) = split(':', $data);
-
-	# and store it all
-	push(@names, { tag => $tag, old => $old, new => $new, file => $file,
-		       dir => $dir, name => fname_filter("$dir/$file") });
-
-	# Remember the tags...
-	push_once(@{$btags}, $tag)
-	    if (defined($tag) && $tag ne "");
-    }
-    close(FILE);
-
-    return @names;
-}
-
-# Create a text-formatted list of names
-sub name_to_list (\@@) {
-    my ($btags, @names) = @_;
-    my (@nlist, @nline) = ();
-
-    debug "Tags:", join(':', @{$btags}), "\n";
-
-    # We group them by tag
-    foreach my $tag ("", @{$btags}[1..$#{$btags}]) {
-	debug "Processing tag $tag...\n";
-
-	@nlist = ();
-
-	# Get a list of files by the tag...
-	foreach my $name (@names) {
-	    debug "Processing $name->{file}...\n";
-
-	    next
-		if ($name->{tag} ne $tag);
-
-	    debug "Pushing $name->{name} on \@nlist...\n";
-	    push(@nlist, $name->{name});
-	}
-
-	# If the tag is not the empty string, list the tag...
-	push(@nline, "  Tag: $tag", "    ")
-	    if ($tag ne "");
-
-	# Now list each file name
-	foreach my $name (@nlist) {
-	    # indent if we run past the end of line limit
-	    push(@nline, "    ")
-		if (@nline == 0 || ($nline[$#nline] ne "    " &&
-		    length($nline[$#nline]) + length($name) + 1 > 70));
-
-	    # add the file name to the list
-	    debug "Adding $name to \@nline...\n";
-	    $nline[$#nline] .= " $name";
-	}
-    }
-
-    return @nline;
-}
-
-# write the log message to a temporary file
-sub write_log ($@) {
-    my ($fname, @text) = @_;
-
-    open(FILE, ">$fname") || die "Cannot open file $fname for writing";
-    print FILE join("\n", @text), "\n";
-    close(FILE);
-}
-
-# Build the header of the commit message: CVSROOT, module name, any
-# branch tags, and the commit time
-sub build_header ($@) {
-	my ($module, $subject, $mailto, @branch_tags) = @_;
-	my (@text, @mailto);
-	my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = gmtime(time());
-	my ($user, $dummy);
-	my ($digest);
-
-	($user, $dummy, $dummy, $dummy, $dummy, $dummy, $dummy) = getpwuid($<);
-
-	@mailto = @{$mailto};
-
-	# generate a unique boundary by calculating the md5sum of the
-	# current time
-	$digest = new MD5;
-	$digest->reset();
-	$digest->add(time() . rand());
-	$boundary = "----=MIME." . unpack("H*", $digest->digest());
-	
-	# Build the mail header
-	push(@text, "From: $user");
-	push(@text, "To: " . join(' ', @mailto));
-	push(@text, "Subject: $subject");
-	push(@text, "MIME-Version: 1.0");
-	push(@text, "Content-Type: multipart/mixed; boundary=\"$boundary\"");
-	push(@text, "");
-	push(@text, "This is a multipart message as defined by RFC2049 (MIME)");
-	push(@text, "");
-	push(@text, "--$boundary");
-	push(@text, "Content-Type: text/plain; charset=us-ascii");
-	push(@text, "Content-Disposition: inline");
-	push(@text, "");
-
-	# Build the commit message header
-	push(@text, "Commiter   : $user");
-	push(@text, "CVSROOT    : $ENV{CVSROOT}");
-	push(@text, "Module     : $module");
-	push(@text, "Branch tags: " . join(' ', @branch_tags[1..$#branch_tags]))
-	if (@branch_tags > 0);
-		push(@text, sprintf("Commit time: %04d-%02d-%02d %02d:%02d:%02d UTC",
-			$year + 1900, $mon + 1, $mday, $hour, $min, $sec));
-
-	return @text, "";
-}
-
-# Send the mail message
-sub send_mail {
-    my ($mailto, $text) = @_;
-    my (@mailto, @text);
-    # I <heart> perl
-    @mailto = @{$mailto};
-    @text = @{$text};
-
-    open(MAIL, "|$MAILER " . join(' ', @mailto));
-    push(@text, "--$boundary--", "");
-    print MAIL join("\n", @text), "\n";
-    close(MAIL);
-}
-
-# Find the tmp directory
-my ($tmpdir) = (tmpdir());
-
-my (@mailto) = ();
-my (@files) = ();
-my (@path) = ();
-my ($modname, $repdir, $dir) = (undef, undef, undef);
-
-# Process command line arguments
-while (@ARGV > 0) {
-    my ($arg) = (shift(@ARGV));
-
-    if ($arg eq '-d') {
-	# Turn on debugging
-	$debug++;
-    } elsif ($arg eq '-M') {
-	# Module name explicitly set -- XXX Not tested, use at your own risk
-	die "Argument for -M missing"
-	    unless (@ARGV > 0);
-
-	$modname = shift(@ARGV);
-    } elsif ($arg eq '-m') {
-	# An address to mail the notification to
-	die "Argument for -m missing"
-	    unless (@ARGV > 0);
-
-	push(@mailto, shift(@ARGV));
-    } else {
-	# the list of filenames passed by CVS--you *must* use %{sVv}!
-	die "Too many arguments!"
-	    unless (@files == 0);
-
-	@files = split(" ", $arg);
-    }
-}
-
-die "Nobody to mail to"
-    unless (@mailto > 0);
-
-die "No files to process"
-    unless (@files > 1);
-
-# The repository directory
-$repdir = shift(@files);
-
-# break it appart...
-@path = split("/", $repdir);
-
-# Now we know the module name, if it wasn't explicitly set
-$modname = $path[0]
-    unless (defined($modname));
-
-# Figure out what our directory is
-if (@path == 1) {
-    $dir = ".";
-} else {
-    $dir = join("/", @path[1..$#path]);
-}
-
-# append a / to it...
-$dir .= "/";
-
-debug "module = $modname\n";
-debug "dir    = $dir\n";
-debug "path   = ", join(":", @path), "\n";
-debug "files  = ", join(":", @files), "\n";
-debug "tmpdir = $tmpdir\n";
-
-my (%fversions);
-
-# Unless its a new directory or imported sources, create file records
-unless (defined($files[1]) && defined($files[2]) &&
-	(($files[1] eq "New" && $files[2] eq "directory") ||
-	 ($files[1] eq "Imported" && $files[2] eq "sources"))) {
-
-    foreach my $fname (@files) {
-	# You *must* use %{sVv} in the call in loginfo!
-	die "Invalid filenames"
-	    unless ($fname =~ /^(.*),([0-9.]+|NONE),([0-9.]+|NONE)$/);
-
-	$fversions{$1} = {
-	    old => ($2 eq "NONE" ? "0" : $2),
-	    new => ($3 eq "NONE" ? "0" : $3),
-	};
-    }
-}
-
-# process log message
-my ($state, $tag) = (STATE_NONE, undef);
-
-my (@modified, @added, @removed, @log, @branch_tags) = ();
-
-while (<STDIN>) {
-    chomp;
-
-    debug "State $state, line:$_\n";
-
-    # Ignore empty space at the beginning of the log message
-    next
-	if ($state == STATE_LOG1 && /^\s*$/);
-
-    # We're done ignoring empty space
-    if ($state == STATE_LOG1) {
-	$state = STATE_LOG2;
-    }
-
-    if ($state == STATE_LOG2) {
-	# Don't modify the lines at all if we're processing the log message
-	push(@log, $_);
-	next;
-    } else {
-	# Strip out leading and trailing space
-	s/^\s*(.*?)\s*$/$1/;
-    }
-
-    if (/^Modified Files/) {
-	# Collect list of modified files
-	debug "State switching to STATE_MODIFIED\n";
-
-	$state = STATE_MODIFIED;
-	$tag = undef;
-
-	next;
-
-    } elsif (/^Added Files/) {
-	# Collect list of added files
-	debug "State switching to STATE_ADDED\n";
-
-	$state = STATE_ADDED;
-	$tag = undef;
-
-	next;
-
-    } elsif (/^Removed Files/) {
-	# Collect list of removed files
-	debug "State switching to STATE_REMOVED\n";
-
-	$state = STATE_REMOVED;
-	$tag = undef;
-
-	next;
-
-    } elsif (/^Log Message/) {
-	# Collect log message
-	debug "State switching to STATE_LOG1\n";
-
-	$state = STATE_LOG1;
-	$tag = undef;
-
-	next;
-
-    } elsif (/^Revision\/Branch/) {
-	# Parse old-style Revision/Branch field
-	debug "Found a branch tag\n";
-
-	/^[^:]+:\s*(.*)/;
-
-	push_once(@branch_tags, $1);
-
-	warn "Tag == $tag"
-	    if (defined($tag));
-
-	next;
-    }
-
-    # Ignore the stuff at the top of the commit report
-    next
-	if ($state == STATE_NONE);
-
-    if (/^Tag:\s*(.*)$/) {
-	# Remember the tag
-	debug "Setting tag to $1\n";
-	$tag = $1;
-	next;
-    }
-
-    my (@tfiles) = ();
-
-    # Find the file in our command line list of files
-    foreach my $file (split) {
-	die "Nothing known about file $file!"
-	    unless (exists($fversions{$file}));
-
-	push @tfiles, {
-	    file => $file,
-	    tag => $tag,
-	    old => $fversions{$file}{old},
-	    new => $fversions{$file}{new},
-	};
-    }
-
-    # Store the file list in the correct array
-    push(@modified, @tfiles)
-	if ($state == STATE_MODIFIED);
-
-    push(@added, @tfiles)
-	if ($state == STATE_ADDED);
-
-    push(@removed, @tfiles)
-	if ($state == STATE_REMOVED);
-}
-
-# Remove trailing blank lines from the log message
-while (@log > 0 && $log[$#log] =~ /^\s*$/) {
-    pop(@log);
-}
-
-# If a new directory was added, we're done...
-if (defined($files[1]) && defined($files[2]) &&
-    $files[1] eq "New" && $files[2] eq "directory") {
-
-    my (@text) = ();
-
-    # If there was a sticky tag for the directory, make it a branch tag
-    if ($log[$#log] =~ /^--> Using per-directory sticky tag \`(.*)\'$/) {
-	push_once(@branch_tags, $1);
-	pop(@log);
-    }
-
-    # Build the message...
-    push(@text, build_header($modname, "Module $modname: New directory $dir",
-	 \@mailto, @branch_tags));
-    push(@text, "Log message:", "", @log);
-
-    # and send it (synchronously)
-    send_mail(\@mailto, \@text);
-
-    # Clean up after ourselves and exit.
-    cleanup_dir($tmpdir);
-    exit(0);
-}
-
-# If an import was done, we're done...
-if (defined($files[1]) && defined($files[2]) &&
-    $files[1] eq "Imported" && $files[2] eq "sources") {
-
-    my (@text) = ();
-
-    # Build the message...
-    push(@text, build_header($modname, "Module $modname: Imported $dir",
-	\@mailto, @branch_tags));
-    push(@text, "Log message:", "", @log);
-
-    # and send it (synchronously)
-    send_mail(\@mailto, \@text);
-
-    # Clean up after ourselves and exit.
-    cleanup_dir($tmpdir);
-    exit(0);
-}
-
-debug "Searching for log file index...";
-
-my ($i);
-
-# Look for an empty log file or one that matches our current log message
-for ($i = 0; ; $i++) {
-    my (@text);
-
-    # found one that doesn't exist...
-    last
-	if (!-e "$tmpdir/logfile.$i");
-
-    # read in the log file
-    open(FILE, "<$tmpdir/logfile.$i");
-    while (<FILE>) {
-	chomp;
-	push(@text, $_);
-    }
-    close(FILE);
-
-    # If the log file was empty, use it
-    last
-	if (@text == 0);
-
-    # If the log messages are identical, use that
-    last
-	if (join(' ', @log) eq join(' ', @text));
-}
-
-debug "$tmpdir/logfile.$i\n";
-
-# Store modified, added, and removed file lists, along with the log message
-names_to_file("$tmpdir/modified.$i", $dir, @modified);
-names_to_file("$tmpdir/added.$i",    $dir, @added);
-names_to_file("$tmpdir/removed.$i",  $dir, @removed);
-write_log("$tmpdir/logfile.$i", @log);
-
-# Now check to see if we're at the end of our rope
-my ($lastdir) = (get_line("$tmpdir/lastdir"));
-
-debug "Checking $ENV{CVSROOT}/$repdir against lastdir $lastdir\n";
-
-# Nope, exit instead of sending a message
-exit(0)
-    if ($lastdir ne "$ENV{CVSROOT}/$repdir");
-
-debug "At last, we've reached the end\n";
-
-# We have to daemonize and sleep so that there isn't any lock hanging
-# around when we get to the cvs rdiff below...
-daemonize();
-sleep(10);
-
-# Build the mail message...
-my (@text) = ();
-@files = ();
-@branch_tags = ();
-
-for ($i = 0; ; $i++) {
-    # No more log files
-    last
-	if (!-e "$tmpdir/logfile.$i");
-
-    # read and insert the log message
-    open(FILE, "<$tmpdir/logfile.$i");
-    push(@text, "Log message:", "");
-    while (<FILE>) {
-	chomp;
-	push(@text, $_);
-    }
-    push(@text, "");
-    close(FILE);
-
-    # read modified list and list all modified files if non-empty
-    @modified = file_to_names(@branch_tags, "$tmpdir/modified.$i");
-    push(@text, "Modified files:", name_to_list(@branch_tags, @modified), "")
-	if (@modified > 0);
-
-    # read added list and list all added files if non-empty
-    @added = file_to_names(@branch_tags, "$tmpdir/added.$i");
-    push(@text, "Added files:", name_to_list(@branch_tags, @added), "")
-	if (@added > 0);
-
-    # read removed list and list all removed files if non-empty
-    @removed = file_to_names(@branch_tags, "$tmpdir/removed.$i");
-    push(@text, "Removed files:", name_to_list(@branch_tags, @removed), "")
-	if (@removed > 0);
-
-    # remember all the files we looked at
-    push(@files, @modified, @added, @removed);
-}
-
-# Now that name_to_list has rebuilt our list of branch tags, we can build the
-# header and prepend it to the message
-unshift(@text, build_header($modname, "Module $modname: Change committed",
-	\@mailto, @branch_tags));
-
-# sort the files out for our diff
-@files = sort { $a->{name} cmp $b->{name} } @files;
-
-my ($user, $filename);
-my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = gmtime(time());
-$user = getpwuid($<);
-
-$filename = sprintf("%s.%04d%02d%02d.%02d%02d%02d.%s.diff", $modname,
-	$year + 1900, $mon + 1, $mday, $hour, $min, $sec, $user);
-
-push(@text, "--$boundary");
-push(@text, "Content-Type: text/plain; name=\"$filename\"");
-push(@text, "Content-Disposition: attachment; filename=\"$filename\"");
-push(@text, "Content-Transfer-Encoding: 8bit");
-push(@text, "");
-
-foreach my $file (@files) {
-    debug "Diffing file $file->{name}...\n";
-
-    # Run cvs rdiff, extracting a diff between the old version and the new
-    open(DIFF, "$CVS -Q rdiff -u -r $file->{old} -r $file->{new} " .
-	 "$modname/$file->{name}|");
-    while (<DIFF>) {
-	chomp;
-	push(@text, $_);
-    }
-    close(DIFF);
-}
-
-# send the mail...
-send_mail(\@mailto, \@text);
-
-# and clean up after ourselves
-cleanup_dir($tmpdir);

CVSROOT/notify

@@ -1,12 +0,0 @@
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"

CVSROOT/passwd

@@ -1,9 +0,0 @@
-drevil:f76FWdDTUBG5c:fs2source
-mysterial:f7nJUwoIhmSrg:fs2source
-wmcoolmon:f7JRB.js9Q1sE:fs2source
-inquisitor:f7BVkOvwjDlWk:fs2source
-penguin:Jh.dOjaiO2jHk:fs2source
-DTP:f7M92Z/6/uep.:fs2source
-unknownplayer:f79BgAn.IzJs6:fs2source
-phreak:f7WQyGiT/jzlM:fs2source
-anonymous:oIKtWP1q6GDt6:fs2source

CVSROOT/rcsinfo

@@ -1,13 +0,0 @@
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/taginfo

@@ -1,20 +0,0 @@
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4->  file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/verifymsg

@@ -1,21 +0,0 @@
-# The "verifymsg" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

CVSROOT/writers

@@ -1,4 +0,0 @@
-drevil
-inquisitor
-mysterial
-penguin