[json_export] Preliminary support for outputting table data to JSON. Includes some defaults for constants that might not be defined in older versions of Jansson on platforms not using the bundled version.

git-svn-id: svn://svn.icculus.org/fs2open/trunk/fs2_open@11296 387891d4-d844-0410-90c0-e4c51a9137d3

code/bmpman/bm_examples.cpp

@@ -1,54 +0,0 @@
-/*
- * Copyright (C) Volition, Inc. 1999.  All rights reserved.
- *
- * All source code herein is the property of Volition, Inc. You may not sell
- * or otherwise commercially exploit the source or things you created based on the
- * source.
- *
- */
-
-/**
- * @file bm_examples.cpp
- * This file contains example code for using bmpman.
- */
-
-#include "bmpman/bmpman.h"
-#include "graphics/2d.h"
-
-void bm_create_example() {
-	static int test_inited = 0;
-	static int test_bmp;
-	static uint test_bmp_data[128 * 64];
-
-	if (!test_inited) {
-		test_inited = 1;
-		// Create the new bitmap and fill in its data.
-		// When you're done with it completely, call
-		// bm_release to free up the bitmap handle
-		test_bmp = bm_create(32, 128, 64, test_bmp_data);
-		int i, j;
-		for (i = 0; i < 64; i++) {
-			for (j = 0; j < 64; j++) {
-				uint r = i * 4;
-				test_bmp_data[j + i * 128] = r;
-			}
-		}
-	}
-
-	// page out the data, so that the next bm_lock will convert the new data to
-	// the correct bpp
-	bm_unload(test_bmp);
-
-	// put in new data
-	int x, y;
-	gr_reset_clip();
-	for (y = 0; y < 64; y++) {
-		for (x = 0; x < 128; x++) {
-			test_bmp_data[y * 128 + x] = 15;
-		}
-	}
-
-	// Draw the bitmap, the upper left corner is the origin (0, 0)
-	gr_set_bitmap(test_bmp);
-	gr_bitmap(0, 0);
-}

code/bmpman/bm_internal.h

@@ -1,119 +1,121 @@
-#ifndef __BM_INTERNAL_H__
-#define __BM_INTERNAL_H__
 /*
-* Copyright (C) Volition, Inc. 1999.  All rights reserved.
-*
-* All source code herein is the property of Volition, Inc. You may not sell
-* or otherwise commercially exploit the source or things you created based on the
-* source.
-*
+ * Copyright (C) Volition, Inc. 1999.  All rights reserved.
+ *
+ * All source code herein is the property of Volition, Inc. You may not sell 
+ * or otherwise commercially exploit the source or things you created based on the 
+ * source.
+ *
 */
 
-/**
- * @file bm_internal.h
- * These are functions and types used by bmpman and a few others.
- *
- * @details It is a "protected" header that requires BMPMAN_INTERNAL to be defined before it can be included. This is to
- * provide a small measure of safety since this functions can cause problems if not used correctly
- */
 
-#ifndef BMPMAN_INTERNAL
-#error The file header "bmpman/bm_internal.h" is protected. Make sure you know what you are doing!
-#endif
 
-#include "bmpman/bmpman.h"
+
+#ifndef __BM_INTERNAL_H__
+#define __BM_INTERNAL_H__
+
+
+// extra check to make sure this stuff doesn't end up in normal files
+// don't use any of this unless BMPMAN_INTERNAL is defined
+#ifdef BMPMAN_INTERNAL
+
 #include "globalincs/pstypes.h"
+#include "bmpman/bmpman.h"
 
-// Bitmap types
-enum BM_TYPE
-{
-	BM_TYPE_NONE = 0,   //!< No type
-	BM_TYPE_USER,       //!< in-memory
-	BM_TYPE_PCX,        //!< PCX
-	BM_TYPE_TGA,        //!< 16 or 32 bit targa
-	BM_TYPE_DDS,        //!< generic identifier for DDS
-	BM_TYPE_PNG,        //!< PNG
-	BM_TYPE_JPG,        //!< 32 bit jpeg
-	BM_TYPE_ANI,        //!< in-house ANI format
-	BM_TYPE_EFF,        //!< specifies any type of animated image, the EFF itself is just text
 
-	// special types
-	BM_TYPE_RENDER_TARGET_STATIC,   //!< 24/32 bit setup internally as a static render target
-	BM_TYPE_RENDER_TARGET_DYNAMIC,  //!< 24/32 bit setup internally as a dynamic render target
+// no-type			( used in: bm_bitmaps[i].type )
+#define BM_TYPE_NONE			0
+// in-memory type	( used in: bm_bitmaps[i].type )
+#define BM_TYPE_USER			1
+// file-type types	( used in: bm_bitmaps[i].type )
+#define BM_TYPE_PCX				2
+#define BM_TYPE_TGA				3		// 16 or 32 bit targa
+#define BM_TYPE_DDS				4		// generic identifier for DDS
+#define BM_TYPE_PNG				5		// PNG
+#define BM_TYPE_JPG				6		// 32 bit jpeg
+#define BM_TYPE_ANI				7		// in-house ANI format
+#define BM_TYPE_EFF				8		// specifies any type of animated image, the EFF itself is just text
+// c-type types		( used in: bm_bitmaps[i].c_type )
+#define BM_TYPE_DXT1			9		// 24 bit with switchable alpha		(compressed)
+#define BM_TYPE_DXT3			10		// 32 bit with 4 bit alpha			(compressed)
+#define BM_TYPE_DXT5			11		// 32 bit with 8 bit alpha			(compressed)
+#define BM_TYPE_CUBEMAP_DDS		12		// generic DDS cubemap	(uncompressed cubemap surface)
+#define BM_TYPE_CUBEMAP_DXT1	13		// 24-bit cubemap		(compressed cubemap surface)
+#define BM_TYPE_CUBEMAP_DXT3	14		// 32-bit cubemap		(compressed cubemap surface)
+#define BM_TYPE_CUBEMAP_DXT5	15		// 32-bit cubemap		(compressed cubemap surface)
+// special types	( used in: bm_bitmaps[i].type )
+#define BM_TYPE_RENDER_TARGET_STATIC	16		// 24/32 bit setup internally as a static render target
+#define BM_TYPE_RENDER_TARGET_DYNAMIC	17		// 24/32 bit setup internally as a dynamic render target
 
-	// Compressed types (bitmap.c_type)
-	BM_TYPE_DXT1,           //!< 24 bit with switchable alpha
-	BM_TYPE_DXT3,           //!< 32 bit with 4 bit alpha
-	BM_TYPE_DXT5,           //!< 32 bit with 8 bit alpha
-	BM_TYPE_CUBEMAP_DDS,    //!< generic DDS cubemap (uncompressed cubemap surface)
-	BM_TYPE_CUBEMAP_DXT1,   //!< 24-bit cubemap        (compressed cubemap surface)
-	BM_TYPE_CUBEMAP_DXT3,   //!< 32-bit cubemap        (compressed cubemap surface)
-	BM_TYPE_CUBEMAP_DXT5    //!< 32-bit cubemap        (compressed cubemap surface)
-};
 
-union bm_extra_info {
+/// Moved from cpp file ///////////////////
+// Consider these 'protected' structures and functions that should only be used by special bitmap functions
+typedef union bm_extra_info {
 	struct {
 		// Stuff needed for animations
-		int first_frame;    //!< used for animations -- points to index of first frame
-		int num_frames;     //!< used for animations -- number of frames in the animation
-		int keyframe;       //!< used for animations -- keyframe info
-		ubyte fps;          //!< used for animations -- frames per second
+		int		first_frame;								// used for animations -- points to index of first frame
+		int		num_frames;									// used for animation -- number of frames in the animation
+		int		keyframe;									// used for animation -- keyframe info
+		ubyte	fps;										// used for animation -- frames per second
 
 		struct {
 			// stuff for static animations
-			ubyte type;                         //!< type for individual images
-			char  filename[MAX_FILENAME_LEN];   //!< filename for individual images
+			ubyte	type;									// type for individual images
+			char	filename[MAX_FILENAME_LEN];				// filename for individual images
 		} eff;
 	} ani;
 
 	struct {
 		// Stuff needed for user bitmaps
-		void* data;         //!< For user bitmaps, this is where the data comes from
-		ubyte bpp;          //!< For user bitmaps, this is what format the data is
-		ubyte flags;        //!< For user bitmaps, Flags passed to bm_create
+		void		*data;									// For user bitmaps, this is where the data comes from
+		ubyte		bpp;									// For user bitmaps, this is what format the data is
+		ubyte		flags;									// Flags passed to bm_create
 	} user;
-};
+} bm_extra_info;
 
-struct bitmap_entry {
+
+typedef struct bitmap_entry	{
 	// identification
-	char filename[MAX_FILENAME_LEN];    //!< filename for this bitmap
+	char		filename[MAX_FILENAME_LEN];			// filename for this bitmap
 
-	uint signature;         //!< a unique signature identifying the data
-	uint palette_checksum;  //!< checksum used to be sure bitmap is in current palette
-	int  handle;            //!< Handle = id*MAX_BITMAPS + bitmapnum
-	int  last_used;         //!< When this bitmap was last used
+	uint		signature;									// a unique signature identifying the data
+	uint		palette_checksum;							// checksum used to be sure bitmap is in current palette
+	int		handle;										// Handle = id*MAX_BITMAPS + bitmapnum
+	int		last_used;									// When this bitmap was last used
 
-	ubyte type;             //!< PCX, USER, ANI, etc
-	ubyte comp_type;        //!< What sort of compressed type, BM_TYPE_NONE if not compressed
-	signed char ref_count;  //!< Number of locks on bitmap.  Can't unload unless ref_count is 0.
+	ubyte		type;									// PCX, USER, ANI, etc
+	ubyte		comp_type;								// What sort of compressed type, BM_TYPE_NONE if not compressed
+	signed char	ref_count;								// Number of locks on bitmap.  Can't unload unless ref_count is 0.
 
-	int dir_type;           //!< which directory this was loaded from (to skip other locations with same name)
+	int		dir_type;								// which directory this was loaded from (to skip other locations with same name)
 
 	// compressed bitmap stuff (.dds) - RT please take a look at this and tell me if we really need it
-	int mem_taken;          //!< How much memory does this bitmap use? - UnknownPlayer
-	int num_mipmaps;        //!< number of mipmap levels, we need to read all of them
+	int		mem_taken;									// How much memory does this bitmap use? - UnknownPlayer
+	int		num_mipmaps;								// number of mipmap levels, we need to read all of them
 
 	// Stuff to keep track of usage
-	ubyte preloaded;        //!< If set, then this was loaded from the lst file
-	int   preload_count;    //!< how many times this gets used in game, for unlocking
-	ubyte used_flags;       //!< What flags it was accessed thru
-	int   load_count;
+	ubyte		preloaded;									// If set, then this was loaded from the lst file
+	int			preload_count;								// how many times this gets used in game, for unlocking
+	ubyte		used_flags;									// What flags it was accessed thru
+	int			load_count;
 
-	bitmap bm;              //!< Bitmap info
+	// Bitmap info
+	bitmap	bm;
 
-	bm_extra_info info;     //!< Data for animations and user bitmaps
+	// Data for animations and user bitmaps
+	bm_extra_info	info;		
 
 #ifdef BMPMAN_NDEBUG
 	// bookeeping
-	ubyte used_last_frame;  // If set, then it was used last frame
-	ubyte used_this_frame;  // If set, then it was used this frame
-	int   data_size;        // How much data this bitmap uses
-	int   used_count;       // How many times it was accessed
+	ubyte		used_last_frame;							// If set, then it was used last frame
+	ubyte		used_this_frame;							// If set, then it was used this frame
+	int		data_size;									// How much data this bitmap uses
+	int		used_count;									// How many times it was accessed
 #endif
-};
+} bitmap_entry;
 
 extern bitmap_entry bm_bitmaps[MAX_BITMAPS];
 
+
 // image specific lock functions
 void bm_lock_ani( int handle, int bitmapnum, bitmap_entry *be, bitmap *bmp, ubyte bpp, ubyte flags );
 void bm_lock_dds( int handle, int bitmapnum, bitmap_entry *be, bitmap *bmp, ubyte bpp, ubyte flags );
@@ -124,4 +126,6 @@ void bm_lock_tga( int handle, int bitmapnum, bitmap_entry *be, bitmap *bmp, ubyt
 void bm_lock_user( int handle, int bitmapnum, bitmap_entry *be, bitmap *bmp, ubyte bpp, ubyte flags );
 
 
+#endif // BMPMAN_INTERNAL
+
 #endif // __BM_INTERNAL_H__

code/bmpman/bmpman.h

@@ -1,630 +1,288 @@
-#ifndef _BMPMAN_H
-#define _BMPMAN_H
 /*
  * Copyright (C) Volition, Inc. 1999.  All rights reserved.
  *
- * All source code herein is the property of Volition, Inc. You may not sell
- * or otherwise commercially exploit the source or things you created based on the
+ * All source code herein is the property of Volition, Inc. You may not sell 
+ * or otherwise commercially exploit the source or things you created based on the 
  * source.
  *
- */
+*/ 
 
-/**
- * @file bmpman.h
- * Header file for the bitmap manager (bmpman)
- */
 
-/**
- * @example bm_examples.cpp
- * @brief This containes examples of bmpman usage
- */
 
-#include "cfile/cfile.h"
+#ifndef _BMPMAN_H
+#define _BMPMAN_H
+
 #include "globalincs/pstypes.h"
+#include "cfile/cfile.h"
 
 #ifndef NDEBUG
-#define BMPMAN_NDEBUG	//!< Enables BMPMAN debugging code
+#define BMPMAN_NDEBUG
 #endif
 
-/**
- * @defgroup BMPMAN_CONSTANTS Macro constants used in/with bmpman.h
- *
- * @{
- */
+#define MAX_BITMAPS 4750			// How many bitmaps the game can handle
+// NOTE:  MAX_BITMAPS shouldn't need to be bumped again.  With the fixed bm_release() and it's
+// proper use even the largest missions should stay under this number.  With the largest retail
+// missions and wasteful content we should still have about 20% of the slots free.  If it still
+// goes over then it's something the artists need to fix.  For instance the Terran Mara fighter,
+// with -spec and -glow and using the Shinepack, needs 117 bitmap slots alone.  111 of those is
+// just for the glowmaps.  This number can be greatly reduced if the number of ani frames for
+// another LOD than LOD0 has fewer or no ani frames.  A 37 frame glow ani for LOD2 is little
+// more than a waste of resources.  Future reports of texture corruption should be initially
+// approached with content as the cause and not code.  If anything we could/should reduce
+// MAX_BITMAPS in the future.  Where it's at now should accomidate even the largest mods.
+//  --  Taylor
 
-/**
- * @brief How many bitmaps the game can handle
- *
- * @attention  MAX_BITMAPS shouldn't need to be bumped again.  With the fixed bm_release() and it's proper use even the
- *   largest missions should stay under this number.  With the largest retail missions and wasteful content we should
- *   still have about 20% of the slots free.  If it still goes over then it's something the artists need to fix.
- *   For instance the Terran Mara fighter, with -spec and -glow and using the Shinepack, needs 117 bitmap slots alone.
- *   111 of those is just for the glowmaps.  This number can be greatly reduced if the number of ani frames for another
- *   LOD than LOD0 has fewer or no ani frames.  A 37 frame glow ani for LOD2 is little more than a waste of resources.
- *   Future reports of texture corruption should be initially approached with content as the cause and not code.
- *   If anything we could/should reduce MAX_BITMAPS in the future.  Where it's at now should accomidate even the
- *   largest mods.  --  Taylor
- */
-#define MAX_BITMAPS 4750
 
-// Flag positions for bitmap.flags
+#define	BMP_AABITMAP						(1<<0)				// antialiased bitmap
+#define	BMP_TEX_XPARENT						(1<<1)				// transparent texture
+#define	BMP_TEX_OTHER						(1<<2)				// so we can identify all "normal" textures
+#define BMP_TEX_DXT1						(1<<3)				// dxt1 compressed 8r8g8b1a (24bit)
+#define BMP_TEX_DXT3						(1<<4)				// dxt3 compressed 8r8g8b4a (32bit)
+#define BMP_TEX_DXT5						(1<<5)				// dxt5 compressed 8r8g8b8a (32bit)
+#define BMP_TEX_CUBEMAP						(1<<6)				// a texture made for cubic environment map
 // ***** NOTE:  bitmap.flags is an 8-bit value, no more BMP_TEX_* flags can be added unless the type is changed!! ******
-#define	BMP_AABITMAP        (1<<0)      //!< antialiased bitmap
-#define	BMP_TEX_XPARENT     (1<<1)      //!< transparent texture
-#define	BMP_TEX_OTHER       (1<<2)      //!< so we can identify all "normal" textures
-#define BMP_TEX_DXT1        (1<<3)      //!< dxt1 compressed 8r8g8b1a (24bit)
-#define BMP_TEX_DXT3        (1<<4)      //!< dxt3 compressed 8r8g8b4a (32bit)
-#define BMP_TEX_DXT5        (1<<5)      //!< dxt5 compressed 8r8g8b8a (32bit)
-#define BMP_TEX_CUBEMAP     (1<<6)      //!< a texture made for cubic environment map
 
-// Combined flags
-#define BMP_TEX_COMP        ( BMP_TEX_DXT1 | BMP_TEX_DXT3 | BMP_TEX_DXT5 )  //!< Compressed textures
-#define BMP_TEX_NONCOMP     ( BMP_TEX_XPARENT | BMP_TEX_OTHER )             //!< Non-compressed textures
-#define	BMP_TEX_ANY         ( BMP_TEX_COMP | BMP_TEX_NONCOMP )              //!< Any texture
+//compressed texture types
+#define BMP_TEX_COMP			( BMP_TEX_DXT1 | BMP_TEX_DXT3 | BMP_TEX_DXT5 )
 
-// Flag positions for bitmap.type
-#define BMP_FLAG_RENDER_TARGET_STATIC       (1<<0)      //!< Texture is a static type
-#define BMP_FLAG_RENDER_TARGET_DYNAMIC      (1<<1)      //!< Texture is a dynamic type (animation)
-#define BMP_FLAG_CUBEMAP                    (1<<2)      //!< Texture is a cubemap
+//non compressed textures
+#define BMP_TEX_NONCOMP			( BMP_TEX_XPARENT | BMP_TEX_OTHER )
 
-/**
- * @}
- */
+// any texture type
+#define	BMP_TEX_ANY				( BMP_TEX_COMP | BMP_TEX_NONCOMP )
 
-struct bitmap
-{
-	short	w;          //!< Width, in number of pixels
-	short	h;          //!< Height, in number of pixels
-	short	rowsize;    //!< What you need to add to go to next row
-	ubyte	bpp;        //!< Requested bitdepth of each pixel. ( 7, 8, 15, 16, 24, 32)
-	ubyte	true_bpp;   //!< The image's actual bitdepth
-	ubyte	flags;      //!< Various texture type flags. @see BMPMAN_CONSTANTS
-	ptr_u	data;       //!< Pointer to data, or maybe offset into VRAM.
-	ubyte *palette;     /**< @brief   Pointer to this bitmap's palette (if it has one).
-	                     *   @details If BMP_NO_PALETTE_MAP flag is cleared, this palette just points to the screen palette. (gr_palette)
-	                     */
-};
+#define BMP_FLAG_RENDER_TARGET_STATIC		(1<<0)
+#define BMP_FLAG_RENDER_TARGET_DYNAMIC		(1<<1)
+#define BMP_FLAG_CUBEMAP					(1<<2)
 
-extern int bm_texture_ram;  //!< how many bytes of textures are used.
+typedef struct bitmap {
+	short	w, h;		// Width and height
+	short	rowsize;	// What you need to add to go to next row
+	ubyte	bpp;		// How many bits per pixel it is. (7,8,15,16,24,32) (what is requested)
+	ubyte	true_bpp;	// How many bits per pixel the image actually is.
+	ubyte	flags;		// See the BMP_???? defines for values (this isn't for the BMP_FLAG_* stuff)
+	ptr_u	data;		// Pointer to data, or maybe offset into VRAM.
+	ubyte *palette;		// If bpp==8, this is pointer to palette.   If the BMP_NO_PALETTE_MAP flag
+						// is not set, this palette just points to the screen palette. (gr_palette)
+} bitmap;
 
-extern int Bm_paging;   //!< Bool type that indicates if BMPMAN is currently paging.
 
-extern int GLOWMAP;     //!< References a map that is a fully lit version of its index -Bobboau
-extern int SPECMAP;     //!< References a map that is for specular mapping -Bobboau
-extern int ENVMAP;      //!< References a map that is for environment mapping -Bobboau
-extern int NORMMAP;     //!< Normal mapping
-extern int HEIGHTMAP;   //!< Height map for normal mapping
-extern int MISCMAP;     //!< Utility map, to be utilized for various things shader authors can come up with
+extern int Bm_paging;
 
-/**
- * @brief Initilizes the bitmap manager
- */
 void bm_init();
 
-/**
- * @brief Closes the bitmap manager, freeing any allocated memory used by bitmaps. Is called at program close.
- */
 void bm_close();
 
-/**
- * Gets the cache slot of the bitmap indexed by handle.
- *
- * @details if the bitmap is an ani, gets the first frame
- *
- * @returns The cache slot index of the bitmap if handle is valid
- *
- * @note If the handle is invalid, an Assert() fails
- */
-int bm_get_cache_slot(int bitmap_id, int separate_ani_frames);
+int bm_get_cache_slot( int bitmap_id, int separate_ani_frames );
 
-/**
- * @brief Gets the next available bitmap slot.
- */
 int bm_get_next_handle();
 
-/**
- * @brief Allocates memory for the given handle.
- *
- * @returns A pointer to the allocated vm if successful,
- * @returns Null, if unsuccessful
- *
- * @note z64 - This function looks fishy. Not only is handle not used in release builds, but bm_bitmaps[handle].size
- *   and bm_texture_size aren't modified unless this is a debug build
- */
-void *bm_malloc(int handle, int size);
+void *bm_malloc(int n, int size);
 
-/**
- * @brief (DEBUG) Similar to bm_malloc, but only updates how much memory is used
- *
- * @note z64 - Also fishy (see bm_malloc)
- */
 void bm_update_memory_used(int n, int size);
 
-/**
- * @brief Loads a bitmap so we can draw with it later.
- *
- * @param filename
- *
- * @returns The bitmap number if successful, else
- * @returns a negative value if not
- */
-int bm_load(const char* filename);
+// how many bytes of textures are used.
+extern int bm_texture_ram;
 
-/**
- * @brief Loads a bitmap so we can draw with it later. (Preferred version)
- *
- * @param filename
- *
- * @returns The bitmap number if successful, else
- * @returns a negative value if not
- */
+// This loads a bitmap so we can draw with it later.
+// It returns a negative number if it couldn't load
+// the bitmap.   On success, it returns the bitmap
+// number.
+int bm_load(const char* filename);
 int bm_load(const SCP_string& filename);
 
-/**
- * @brief Reloads a bitmap as a duplicate.
- *
- * @details This function basically allows you to load a bitmap which already exists (by filename). This is useful
- *   because in some cases we need to have a bitmap which is locked in screen format _and_ texture format, such as
- *   the pilot pics and squad logos
- *
- * @param filename
- *
- * @returns The bitmap number if successful, else
- * @returns a negative value if not
- */
+// special load function. basically allows you to load a bitmap which already exists (by filename). 
+// this is useful because in some cases we need to have a bitmap which is locked in screen format
+// _and_ texture format, such as pilot pics and squad logos
 int bm_load_duplicate(const char *filename);
 
-/**
- * Loads a bitmap which exists somewhere in the RAM.
- *
- * @param bpp The bitdepth of the bitmap
- * @param w The width of the bitmap
- * @param h The height of the bitmap
- * @param[in] data The bitmap's data glob
- * @param flags
- *
- * @note The used RAM cannot be freed until bm_release is called on the created bitmap
- */
-int bm_create(int bpp, int w, int h, void *data = NULL, int flags = 0);
+// Creates a bitmap that exists in RAM somewhere, instead
+// of coming from a disk file.  You pass in a pointer to a
+// block of data.  The data can be in the following formats:
+// 8 bpp (mapped into game palette)
+// 32 bpp
+// On success, it returns the bitmap number.  You cannot 
+// free that RAM until bm_release is called on that bitmap.  
+// See example at bottom of this file
+int bm_create( int bpp, int w, int h, void *data = NULL, int flags = 0);
 
-/**
- * @brief Unloads a bitmap's data, but not the bitmap info
- *
- * @details The bm number (n) may be reused once this function has been called on it. However, it will have to be paged
- *   in the next time it is locked.
+// Frees up a bitmap's data, but bitmap number 'n' can
+// still be used, it will just have to be paged in next
+// time it is locked.
+int bm_unload( int n, int clear_render_targets = 0, bool nodebug = false);
 
- * @param handle                The index number of the bitmap to free
- * @param clear_render_targets  If true, release a render target
- * @param nodebug               If true, exclude certain debug messages
- *
- * @returns 0 if not successful,
- * @returns 1 if successful
- */
-int bm_unload(int handle, int clear_render_targets = 0, bool nodebug = false);
+// like bm_unload() except that it's safe to use to free data without worrying about
+// load_count so it's safe to use in relation to bm_release() and in gr_*_texture functions
+int bm_unload_fast( int n, int clear_render_targets = 0 );
 
-/**
- * @brief Quickly unloads a bitmap's data, ignoring the load_count
- *
- * @details Similar to bm_unload(), except that it can be safely used to free data without worrying about load_count.
- *   It's safe to use in relation to bm_release() and in gr_*_texture functions
- *
- * @param handle                The bm number of the bitmap to free
- * @param clear_render_targets  If true, release a render target
- *
- * @note bm_free_data_fast() is used here and NOT bm_free_data()
- */
-int bm_unload_fast(int handle, int clear_render_targets = 0);
+// Frees up a bitmap's data, and it's slot, so bitmap 
+// number 'n' cannot be used anymore, and bm_load or
+// bm_create might reuse the slot.
+int bm_release( int n, int clear_render_targets = 0 );
 
-/**
- * @brief Frees both a bitmap's data and it's associated slot.
- *
- * @details Once called, the bm number 'n' cannot be used until bm_load or bm_create is re-inits the slot.
- *
- * @param handle               The index number of the bitmap to release
- * @param clear_render_targets If nonzero, also release render targets
- *
- * @returns 1 on success,
- * @returns 0 otherwise
- *
- * @note If the passed handle is that of an ANI, it frees EVERY frame. Be sure to only pass the handle of the first frame!
- *
- * @todo upgrade return type and clear_render_targets type to bools
- */
-int bm_release(int handle, int clear_render_targets = 0);
+// This loads a bitmap sequence so we can draw with it later.
+// It returns a negative number if it couldn't load
+// the bitmap.   On success, it returns the bitmap
+// number of the first frame and nframes is set.
+extern int bm_load_animation( const char *filename, int *nframes = NULL, int *fps = NULL, int *keyframe = NULL, int can_drop_frames = 0, int dir_type = CF_TYPE_ANY );
 
-/**
- * @brief Loads a bitmap sequance so we can draw with it.
- *
- * @param[in] filename
- * @param[out] nframes          If non-null, set to the number of frames the animation has
- * @param[out] fps              If non-null, set to the fps of this animation
- * @param[out] keyframe         if non null, set to the keyframe index of this animation
- * @param[in] can_drop_frames   If set, allows dropped frames
- * @param[in] dir_type          Directory type
- *
- * @returns The bm number of the first bitmap in the sequence if successful, or
- * @returns A negative value if unsuccessful
- */
-int bm_load_animation(const char *filename, int *nframes = NULL, int *fps = NULL, int *keyframe = NULL, int can_drop_frames = 0, int dir_type = CF_TYPE_ANY);
+//Loads either animation (bm_load_animation) or still image (bm_load)
+extern int bm_load_either(const char *filename, int *nframes = NULL, int *fps = NULL, int *keyframe = NULL, int can_drop_frames = 0, int dir_type = CF_TYPE_ANY);
 
-/**
- * @brief Loads either animation (bm_load_animation) or still image (bm_load)
- *
- * @param[in] filename
- * @param[out] nframes  If non-null and loading was successful, set to the number of frames the animation has
- * @param[out] fps      If non-null and loading was successful, set to the fps of this animation
- * @param[out] keyframe if non null and loading was successful, set to the keyframe index of this animation
- * @param[in] can_drop_frames
- * @param[in] dir_type
- *
- * @returns The bm number of the first bitmap in the sequence if successful, or
- * @returns A negative value if unsuccessful
- */
-int bm_load_either(const char *filename, int *nframes = NULL, int *fps = NULL, int *keyframe = NULL, int can_drop_frames = 0, int dir_type = CF_TYPE_ANY);
+// This locks down a bitmap and returns a pointer to a bitmap
+// that can be accessed until you call bm_unlock.   Only lock
+// a bitmap when you need it!  This will convert it into the 
+// appropriate format also.
+extern bitmap * bm_lock( int bitmapnum, ubyte bpp, ubyte flags, bool nodebug = false);
 
-/**
- * @brief Locks down the bitmap indexed by bitmapnum.
- *
- * @details Also converts the bitmap to the appropriate format specified by bpp and flags. Only lock a bitmap when you
- *   need it!
- *
- * @param bitmapnum The number indexing the desired bitmap
- * @param bpp       The desired bpp of the bitmep
- * @param flags     The desired bitmap format
- * @param nodebug
+// The signature is a field that gets filled in with 
+// a unique signature for each bitmap.  The signature for each bitmap
+// will also change when the bitmap's data changes.
+extern uint bm_get_signature( int bitmapnum);
 
- * @returns A pointer to the bitmap that's valid until bm_unlock is called if successful, or
- * @returns NULL if unsuccessful
- */
-bitmap* bm_lock(int handle, ubyte bpp, ubyte flags, bool nodebug = false);
-
-/**
- * @brief Returns a unique signiature for the bitmap indexed by handle
- *
- * @details A signature will change when the bitmap's data changes
- */
-uint bm_get_signature(int handle);
-
-/**
- * @brief Returns the image type of the given bitmap handle
- */
+//gets the image type
 ubyte bm_get_type(int handle);
 
-/**
- * @brief Unlocks a bitmap
- *
- * @details Decrements the ref_count member of the bitmap_entry struct, A bitmap can only be unloaded when the
- * ref_count is 0
- */
-void bm_unlock(int handle);
+// Unlocks a bitmap
+extern void bm_unlock( int bitmapnum );
 
-/**
- * @brief Checks if the bitmap indexed by handle is valid
- *
- * @details Some early known false or out of range handles (such as negative) are checked within
- * an initial routine pass, followed by a more thorough check routine to ensure the
- * series of bitmaps within the bm_bitmaps[] structure have not become invalid.
- *
- * @returns Nonzero if valid, else
- * @returns Zero otherwise
- *
- * @todo z64 - Returned value is essentially a bool type, need to check all caller functions to see if it can safely
- *   be updated to reflect this
- */
-int bm_is_valid(int handle);
+//WMC - Returns 0 if invalid, nonzero if valid
+extern int bm_is_valid(int handle);
 
-/**
- * @brief Gets info on the bitmap indexed by handle.
- *
- * @param[out] w      If non-null, gets the width
- * @param[out] h      If non-null, gets the heigth
- * @param[out] flags  If non-null, gets the flags
- * @param[out] nframs If non-null, gets the nframes
- * @param[out] fps    If non-null, gets the fps
- *
- * @returns The handle on success, or
- * @returns The handle to the first frame on success, or
- * @returns -1 on failure
- */
-int bm_get_info(int handle, int *w = NULL, int * h = NULL, ubyte * flags = NULL, int *nframes = NULL, int *fps = NULL);
+// Gets info.   w,h,or flags,nframes or fps can be NULL if you don't care.
+//WMC - Returns -1 on failure, handle or first frame handle on success.
+int bm_get_info( int bitmapnum, int *w=NULL, int * h=NULL, ubyte * flags=NULL, int *nframes=NULL, int *fps=NULL );
 
-/**
- * @brief Gets the filename of the bitmap indexed by handle
- *
- * @param[out] filename The filename of the bitmap, if successful. Is set to an empty string if unseccessful
- *
- * @todo z64 - maybe deprecate this in favor of an SCP_string version
- */
-void bm_get_filename(int bitmapnum, char *filename);
+// get filename
+extern void bm_get_filename(int bitmapnum, char *filename);
 
-/**
- * @brief Gets the filename of the bitmap indexed by handle, which must exist.
- *
- * @details If the bitmap does not exist (i.e. the handle is invalid), then an Assertion halts program execution.
- *
- * @returns A const char* to the filename of the bitmap
- *
- * @todo z64 - maybe deprecate this in favor of an SCP_string version.
- * @todo z64 - maybe combine this with the other bm_get_filename function like so:
- *   void bm_get_filename(int handle, SCP_string *filename, bool must_exist = false);
- */
-const char *bm_get_filename(int handle);
+// call to load all data for all bitmaps that have been requested to be loaded
+extern void bm_gfx_load_all();
+extern void bm_unload_all();
 
-/**
- * @brief Loads all data for all bitmaps that have been requested to be loaded
- *
- * @note This function is not defined.
- */
-void bm_gfx_load_all();
+// call to get the palette for a bitmap
+void bm_get_palette(int n, ubyte *pal, char *name);
 
-/**
- * @brief Unloads all used bitmaps, should only ever be called by game_shutdown()
- *
- * @todo Maybe move this declaration into bmpman.cpp and then extern this function within game_shutdown() to
- *  ensure it only ever gets called there.
- */
-void bm_unload_all();
+// Hacked function to get a pixel from a bitmap.
+// Only works good in 8bpp mode.
+void bm_gfx_get_pixel( int bitmap, float u, float v, ubyte *r, ubyte *g, ubyte *b );
 
-/**
- * @brief Gets the palette for a given bitmap indexed by handle, and optionally the filename
- *
- * @param[out] pal Is set to reference the bitmap's palette
- * @param[out] name (optional) Is set to the bitmap's filename
- *
- * @todo Maybe get rid of the optional filename and have the callers call bm_get_filename. Less efficient, however.
- */
-void bm_get_palette(int handle, ubyte *pal, char *name);
-
-/**
- * @brief Hack to get a pixel from a bitmap
- *
- * @details only works good in 8bpp mode
- *
- * @note This function is not defined.
- */
-void bm_gfx_get_pixel(int bitmap, float u, float v, ubyte *r, ubyte *g, ubyte *b);
-
-/**
- * @brief (DEBUG) Gets memory size, in bytes, of the locked bitmaps
- *
- * @details Both params are non-optional, and must be non-null. There's currently no safety checks on either.
- *
- * @param ntotal[out] Memory size, in bytes, of the locked bitmaps
- * @param nnew[out]   Memory size, in bytes, of the bitmaps that were locked since the last frame
- *
- * @note This is a debug function, and is undefined within release builds
- */
+// Returns number of bytes of bitmaps locked this frame
+// ntotal = number of bytes of bitmaps locked this frame
+// nnew = number of bytes of bitmaps locked this frame that weren't locked last frame
 void bm_get_frame_usage(int *ntotal, int *nnew);
 
-/**
- * @brief Reloads an existing bmpman slot with different bitmap
- *
- * @param[in] filename The filename of the image to load
- *
- * @returns The bitmap handle on success, or
- * @returns A negative value on failure
- *
- * @note This should only be used if you are certain the new picture is the same type, has same dimensions, etc.
- */
+// Reload a different image into an existing bmpman slot
 int bm_reload(int bitmap_handle, const char* filename);
 
-/**
- * @brief Tells bmpman to start keeping track of what bitmaps are used where
- */
-void bm_page_in_start();
+/* 
+ * Example on using bm_create
+ * 
+	{
+		static int test_inited = 0;
+		static int test_bmp;
+		static uint test_bmp_data[128*64];
 
-/**
- * @brief Tells bmpman to stop paging (?)
- */
+		if ( !test_inited )	{
+			test_inited = 1;
+			// Create the new bitmap and fill in its data.
+			// When you're done with it completely, call
+			// bm_release to free up the bitmap handle
+			test_bmp = bm_create( 32, 128, 64, test_bmp_data );
+			int i,j;
+			for (i=0; i<64; i++ )	{
+				for (j=0; j<64; j++ )	{
+					uint r=i*4;
+					test_bmp_data[j+i*128] = r;
+				}
+			}
+		}
+
+		bm_unload(test_bmp);	// this pages out the data, so that the
+									// next bm_lock will convert the new data to the
+									// correct bpp
+
+		// put in new data
+		int x,y;
+		gr_reset_clip();
+		for (y=0; y<64; y++)
+			for (x=0; x<128; x++ )
+				test_bmp_data[y*128+x] = 15;
+
+		// Draw the bitmap to upper left corner
+		gr_set_bitmap(test_bmp);
+		gr_bitmap( 0,0 );
+	}
+*/
+
+
+//============================================================================
+// Paging stuff
+//============================================================================
+
+void bm_page_in_start();
 void bm_page_in_stop();
 
 // Paging code in a library should call these functions
 // in its page in function.
 
-/**
- * @brief Marks a texture as being used for this level
- *
- * @param[in] num_frames If specified, assumes this is an animated texture
- */
-void bm_page_in_texture(int bitmapnum, int num_frames = 0);
+// Marks a texture as being used for this level
+// If num_frames is passed, assume this is an animation
+void bm_page_in_texture( int bitmapnum, int num_frames = 0 );
 
-/**
- * @brief Marks a textures as being used for level and is transparant
- *
- * @param[in] num_frames If specified, assumes this is an animated texture
- */
-void bm_page_in_xparent_texture(int bitmapnum, int num_frames = 1);
+// marks a texture as being a transparent textyre used for this level
+// Marks a texture as being used for this level
+// If num_frames is passed, assume this is an animation
+void bm_page_in_xparent_texture( int bitmapnum, int num_frames=1 );
 
-/**
- * @brief Marks a texture as being used for this level, and is anti-aliased
- *
- * @param[in] num_frames If specified, assumes this is an animated texture
- */
-void bm_page_in_aabitmap(int bitmapnum, int num_frames = 1);
+// Marks an aabitmap as being used for this level
+// If num_frames is passed, assume this is an animation
+void bm_page_in_aabitmap( int bitmapnum, int num_frames=1 );
 
-/**
- * @brief Unloads the bitmap indexed by handle that was previously paged-in
- *
- * @returns 0 If the bitmap had already been released, or
- * @returns 0 If the handle is invalid, or
- * @returns 1 If successful
- *
- * @todo The return type should be a bool
- */
-int bm_page_out(int handle);
+// unload a texture that was paged in
+int bm_page_out( int handle );
 
-/**
- * @brief Sets BMPMAN's memory mode
- *
- * @details 0 = High memory;
- *          1 = Low memory (loads every other frame of ani's);
- *          2 = Debug low memory (only use first frame of each ani)
- *
- * @todo This should use an enum, or instead allow an arbitrary number to drop frames (like 1/2, 1/3, etc.)
- */
-void bm_set_low_mem(int mode);
+// 
+// Mode: 0 = High memory
+//       1 = Low memory ( every other frame of ani's)
+//       2 = Debug low memory ( only use first frame of each ani )
+void bm_set_low_mem( int mode );
+
+const char *bm_get_filename(int handle);
 
-/**
- * @brief Sets bm_set_components and bm_get_components to reference screen format functions
- */
 void BM_SELECT_SCREEN_FORMAT();
-
-/**
- * @brief Sets bm_set_components and bm_get_components to reference texture format functions
- */
 void BM_SELECT_TEX_FORMAT();
-
-/**
- * @brief Sets bm_set_components and bm_get_components to reference texture format functions (with alpha)
- */
 void BM_SELECT_ALPHA_TEX_FORMAT();
 
-/**
- * @brief Functional pointer that references any of the bm_set_components functions.
- *
- * @details The bm_set_components functions packs the RGBA values into the ubyte array referenced by pixel, whose
- * format differs according to its bpp value and presence of an alpha channel. The RGBA values are scaled accordingly.
- *
- * @param[out] pixel The pixel to set
- * @param[in] r Red value   (may not be NULL)
- * @param[in] g Green value (may not be NULL)
- * @param[in] b Blue value  (may not be NULL)
- * @param[in] a Alpha value (currently ignored)
- *
- * @note z64 - These functions were made predating the introduction of C++ classes, and are basically the equivalent
- * of Pixel::set(ubyte *r, ubyte *b, ubyte *g). The original comment mentions that any of the rgba params may be
- * NULL, but this is by far _NOT_ the case, as a NULL value will cause undefined behavior (really really bad chroma
- * corruption)
- *
- * @note These functions assume the incoming bitdepth will always be >= to the outgoing bitdepth of the pixel. Should
- * the incoming bitdepth be lower, the outgoing values will appear darker than they should be
- */
-extern void(*bm_set_components)(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+// set the rgba components of a pixel, any of the parameters can be NULL
+extern void (*bm_set_components)(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+extern void (*bm_set_components_32)(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+void bm_set_components_argb_d3d_16_screen(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+void bm_set_components_argb_d3d_32_screen(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+void bm_set_components_argb_d3d_16_tex(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
+void bm_set_components_argb_d3d_32_tex(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
 
-/**
- * @brief Functional pointer that references any of the bm_set_components_32 functions.
- *
- * @details The bm_set_components functions packs the RGBA values into the ubyte array referenced by pixel, whose
- * format differs according to its bpp value and presence of an alpha channel. The RGBA values are scaled accordingly.
- *
- * @see bm_set_components
- */
-extern void(*bm_set_components_32)(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
-
-/**
- * @brief Sets the 16bpp screen pixel to the specified RGBA value
- *
- * @see bm_set_components
- */
-void bm_set_components_argb_16_screen(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
-
-/**
- * @brief Sets the 32bpp screen pixel to the specified RGBA value
- *
- * @see bm_set_components
- */
-void bm_set_components_argb_32_screen(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
-
-/**
- * @brief Sets the 16bpp texture pixel to the specified RGBA value
- *
- * @see bm_set_components
- */
-void bm_set_components_argb_16_tex(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
-
-/**
- * @brief Sets the 32bpp texture pixel to the specified RGBA value
- *
- * @see bm_set_components
- */
-void bm_set_components_argb_32_tex(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
-
-/**
- * @brief Gets the RGBA components of a pixel according to the selected mode
- *
- * @see BM_SELECT_SCREEN_FORMAT() BM_SELECT_TEX_FORMAT() BM_SELECT_ALPHA_TEX_FORMAT()
- */
+// get the rgba components of a pixel, any of the parameters can be NULL
 void bm_get_components(ubyte *pixel, ubyte *r, ubyte *g, ubyte *b, ubyte *a);
 
-/**
- * @brief Returns the compression type of the bitmap indexed by handle
- */
-int bm_is_compressed(int handle);
+extern int GLOWMAP;	//this holds a reference to a map that is a fully lit version of its index -Bobboau
+extern int SPECMAP;	//this holds a reference to a map that is for specular mapping -Bobboau
+extern int ENVMAP;	//this holds a reference to a map that is for environment mapping -Bobboau
+extern int NORMMAP;	// normal mapping
+extern int HEIGHTMAP;	// height map for normal mapping
+extern int MISCMAP; // Utility map, to be utilized for various things shader authors can come up with
 
-/**
- * @brief Gets the correct TCACHE_TYPE for compressed graphics (uncompressed are assumed TCACHE_TYPE_NORMAL)
- */
-int bm_get_tcache_type(int handle);
-
-/**
- * @brief Gets the size, in bytes, taken up by the bitmap indexed by handle
- *
- * @todo retval should be a size_t
- */
-int bm_get_size(int handle);
-
-/**
- * @brief Gets the number of mipmaps of the indexed texture
- */
-int bm_get_num_mipmaps(int handle);
-
-/**
- * @brief Checks to see if the indexed bitmap has an alpha channel
- *
- * @note Currently just checks if the bitmap is 32bpp and is not a .PCX
- *
- * @todo retval should be a bool
- */
+int bm_is_compressed(int num);
+int bm_get_tcache_type(int num);
+int bm_get_size(int num);
+int bm_get_num_mipmaps(int num);
 int bm_has_alpha_channel(int handle);
 
-/**
- * @brief (DEBUG) Prints all loaded bitmaps to an outwindow
- */
 void bm_print_bitmaps();
 
-/**
- * @brief Creates a render target as close to the desired resolution as possible.
- *
- * @returns the handle of an avilable render target if successful, or
- * @returns -1 if not successful
- *
- * @note BM_FLAG_RENDER_TARGET_STATIC are drawn once/infrequently, while BM_FLAG_RENDER_TARGET_DYNAMIC are drawn roughly once every frame
- */
-int bm_make_render_target(int width, int height, int flags);
-
-/**
- * @brief Checks to see if the given bitmap indexed by handle is a render target
- *
- * @returns The render type (BM_TYPE) if it is a render target, or
- * @returns 0 if it is not
- */
-int bm_is_render_target(int handle);
-
-/**
- * @brief (GR function) Calls gr_bm_set_render target for the given bitmap indexed by handle
- *
- * @returns 1 if successful, or
- * @returns 0 if unsuccessful
- *
- * @todo retval should be a bool
- */
+int bm_make_render_target( int width, int height, int flags );
+int bm_is_render_target(int bitmap_id);
 int bm_set_render_target(int handle, int face = -1);
 
-/**
- * @brief Loads and parses an .EFF
- *
- * @param[in]  filename The filename of the .EFF
- * @param[in]  dir_type
- * @param[out] nframes (optional) If given, is set to the number of frames this .EFF has
- * @param[out] nfps    (optional) If given, is set to the fps of this .EFF
- * @param[out] key     (optional) If given, is set to the keyframe index of this .EFF
- * @param[out] type    (optional) If given, is set to the BM_TYPE of the .EFF
- *
- * @returns 0 If successful,
- * @returns -1 if not successful
- *
- * @todo retval should be a bool
- */
 int bm_load_and_parse_eff(const char *filename, int dir_type, int *nframes, int *nfps, int *key, ubyte *type);
-
 #endif

code/cmdline/cmdline.cpp

@@ -217,6 +217,7 @@ Flag exe_params[] =
 	{ "-dis_weapons",		"Disable weapon rendering",					true,	0,					EASY_DEFAULT,		"Dev Tool",		"http://www.hard-light.net/wiki/index.php/Command-Line_Reference#-dis_weapons", },
 	{ "-output_sexps",		"Output SEXPs to sexps.html",				true,	0,					EASY_DEFAULT,		"Dev Tool",		"http://www.hard-light.net/wiki/index.php/Command-Line_Reference#-output_sexps", },
 	{ "-output_scripting",	"Output scripting to scripting.html",		true,	0,					EASY_DEFAULT,		"Dev Tool",		"http://www.hard-light.net/wiki/index.php/Command-Line_Reference#-output_scripting", },
+	{ "-output_json_data",	"Output table objects to [table].json",		true,	0,					EASY_DEFAULT,		"Dev Tool",		"http://www.hard-light.net/wiki/index.php/Command-Line_Reference#-output_json_data", },
 	{ "-save_render_target",	"Save render targets to file",			true,	0,					EASY_DEFAULT,		"Dev Tool",		"http://www.hard-light.net/wiki/index.php/Command-Line_Reference#-save_render_target", },
 	{ "-debug_window",		"Display debug window",						true,	0,					EASY_DEFAULT,		"Dev Tool",		"http://www.hard-light.net/wiki/index.php/Command-Line_Reference#-debug_window", },
 	{ "-verify_vps",		"Spew VP CRCs to vp_crcs.txt",				true,	0,					EASY_DEFAULT,		"Dev Tool",		"http://www.hard-light.net/wiki/index.php/Command-Line_Reference#-verify_vps", },
@@ -494,6 +495,9 @@ bool Cmdline_no_unfocus_pause = false;
 cmdline_parm get_flags_arg("-get_flags", "Output the launcher flags file", AT_NONE);
 cmdline_parm output_sexp_arg("-output_sexps", NULL, AT_NONE); //WMC - outputs all SEXPs to sexps.html
 cmdline_parm output_scripting_arg("-output_scripting", NULL, AT_NONE);	//WMC
+cmdline_parm output_json_data_arg("-output_json_data", "Output table objects to [table].json", AT_NONE);	//chief1983, Cmdline_output_json_data
+
+bool Cmdline_output_json_data = false;
 
 // Deprecated flags - CommanderDJ
 cmdline_parm deprecated_spec_arg("-spec", "Deprecated", AT_NONE);
@@ -1509,6 +1513,11 @@ bool SetCmdlineParams()
 		output_sexps("sexps.html");
 	}
 
+	if ( output_json_data_arg.found() )
+	{
+		Cmdline_output_json_data = true;
+	}
+
 	if ( no_vbo_arg.found() )
 	{
 		Cmdline_novbo = 1;

code/cmdline/cmdline.h

@@ -155,5 +155,6 @@ extern int Cmdline_reparse_mainhall;
 extern bool Cmdline_frame_profile;
 extern bool Cmdline_profile_write_file;
 extern bool Cmdline_no_unfocus_pause;
+extern bool Cmdline_output_json_data;
 
 #endif

code/debugconsole/consoleparse.cpp

@@ -9,8 +9,10 @@
 ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
 
 /////////////////
-// @todo Make a fast version of the parse_long, parse_ulong, etc. That just checks the first 1-3 characters. The fast version will be used in retail builds while the slow/safe version will be in debug's
-// @todo Maybe make parser functions case-insensitive
+// Testing Goals
+// Breakpoints are set at places that need testing:
+// * the value of endptr strtol and strtoul needs to investigated, according to cplusplus.com, *endptr = end of the string that was successfully converted
+// TODO: Make a fast version of the parse_long, parse_ulong, etc. That just checks the first 1-3 characters. The fast version will be used in retail builds while the slow/safe version will be in debug's
 ////////////////
 #include "debugconsole/consoleparse.h"
 
@@ -464,7 +466,7 @@ void dc_required_string(char *pstr)
 
 	dc_ignore_gray_space();
 
-	if (strncmp(pstr, Cp, strlen(pstr)) == 0) {
+	if (strnicmp(pstr, Cp, strlen(pstr))) {
 		str_found = pstr;
 	}
 
@@ -490,10 +492,10 @@ int dc_required_string_either(char *str1, char *str2)
 
 	dc_ignore_gray_space();
 
-	if (strncmp(str1, Cp, strlen(str1)) == 0) {
+	if (strncmp(str1, Cp, strlen(str1) == 0)) {
 		str_found = str1;
 		i = 0;
-	} else if (strncmp(str2, Cp, strlen(str2)) == 0) {
+	} else if (strncmp(str2, Cp, strlen(str2) == 0)) {
 		str_found = str2;
 		i = 1;
 	}
@@ -561,7 +563,7 @@ bool dc_optional_string(const char *pstr)
 {
 	dc_ignore_gray_space();
 
-	if (strncmp(pstr, Cp, strlen(pstr)) != 0) {
+	if (strncmp(pstr, Cp, strlen(pstr) != 0)) {
 		return false;
 	} // Else, optional string was found
 

code/freespace2/freespace.cpp

@@ -7127,6 +7127,13 @@ int game_main(char *cmdline)
 		return 0;
 	}
 
+	// maybe output parsed table objects, and exit
+	if (Cmdline_output_json_data) {
+		ship_output_json("ships.json");
+		weapons_output_json("weapons.json");
+		game_shutdown();
+		return 0;
+	}
 
 	// maybe spew VP CRCs, and exit
 	if (Cmdline_verify_vps) {

code/freespace2/freespace.rc

@@ -336,8 +336,8 @@ END
 //
 
 VS_VERSION_INFO VERSIONINFO
- FILEVERSION 3,7,2,11329
- PRODUCTVERSION 3,7,2,11329
+ FILEVERSION 3,7,1,000000
+ PRODUCTVERSION 3,7,1,000000
  FILEFLAGSMASK 0x3fL
 #ifdef _DEBUG
  FILEFLAGS 0x1L
@@ -354,12 +354,12 @@ BEGIN
         BEGIN
             VALUE "CompanyName", "Volition Inc."
             VALUE "FileDescription", "FreeSpace 2 Open"
-            VALUE "FileVersion", "3.7.2.11329"
+            VALUE "FileVersion", "3.7.1.000000"
             VALUE "InternalName", "FreeSpace 2 Open"
             VALUE "LegalCopyright", "Copyright © 1998"
             VALUE "OriginalFilename", "fs2.exe"
             VALUE "ProductName", "FreeSpace 2 Open"
-            VALUE "ProductVersion", "3.7.2"
+            VALUE "ProductVersion", "3.7.1"
         END
     END
     BLOCK "VarFileInfo"

code/globalincs/version.h

@@ -34,8 +34,8 @@
 
 #define FS_VERSION_MAJOR 3					// major version
 #define FS_VERSION_MINOR 7					// increase by 1 for minor revs
-#define FS_VERSION_BUILD 2					// bugfix release
-#define FS_VERSION_REVIS 11329				// SVN revision
+#define FS_VERSION_BUILD 1					// bugfix release
+#define FS_VERSION_REVIS 000000				// SVN revision
 //#define FS_VERSION_IDENT NOX("custom")	// special build release identifier, must be a string (don't define unless it's supposed to be used!!)
 
 #define VERSION_LOC_FNAME			"version.nfo"

code/graphics/gropengltnl.cpp

@@ -192,10 +192,6 @@ int gr_opengl_create_stream_buffer()
 {
 	opengl_vertex_buffer buffer;
 
-	if ( !Use_VBOs ) {
-		return -1;
-	}
-
 	vglGenBuffersARB(1, &buffer.vbo);
 
 	GL_vertex_buffers.push_back(buffer);

code/hud/hudsquadmsg.cpp

@@ -858,7 +858,7 @@ int hud_squadmsg_is_target_order_valid(int order, int find_order, ai_info *aip )
 	}
 
 	// if we are messaging a ship, and that ship is our target, no target type orders are ever active
-	if ( (Squad_msg_mode == SM_MODE_SHIP_COMMAND) && (Objects[target_objnum].instance == Msg_instance) ){
+	if ( (Squad_msg_mode == SM_MODE_SHIP_COMMAND) && (target_objnum == Msg_instance) ){
 		return 0;
 	}
 

code/menuui/credits.cpp

@@ -35,9 +35,9 @@
 char *fs2_open_credit_text = 
 "SOURCE CODE PROJECT STAFF:\n"
 	"\n"
-	"Project Leader:\n"
+	"Project Leaders:\n"
 	"\n"
-	"Fabian \"The E\" Woltermann\n"
+	"Cliff \"chief1983\" Gordon\n"
 	"\n"
 	"Senior Advisors:\n"
 	"\n"
@@ -45,7 +45,6 @@ char *fs2_open_credit_text =
 	"Michael \"Zacam\" LaFleur\n"
 	"Taylor Richards\n"
 	"Edward \"Inquisitor\" Gardner\n"
-	"Cliff \"chief1983\" Gordon\n"
 	"\n"
 	"Programmers:\n"
 	"\n"
@@ -53,13 +52,19 @@ char *fs2_open_credit_text =
 	"Derek \"Kazan\" Meek\n"
 	"Nick \"phreak\" Iannetta\n"
 	"Mike \"Bobboau\" Abegg\n"
-	"Backslash, Echelon9, Flaming_Sword\n"
-	"FUBAR, Iss Mneur, kkmic\n"
-	"Shade, Soulstorm, Sushi\n"
-	"Swifty, Wanderer, CommanderDJ\n"
-	"Valathil, MageKing17, Yarn\n"
-	"m!m, z64555, zookeeper\n"
-	"jg18, niffiwan\n"
+	"Backslash\n"
+	"Echelon9\n"
+	"Flaming_Sword\n"
+	"FUBAR\n"	
+	"Iss Mneur\n"	
+	"kkmic\n"
+	"Shade\n"
+	"Soulstorm\n"
+	"Sushi\n"
+	"Swifty\n"
+	"Wanderer\n"	
+	"Fabian \"The E\" Woltermann\n"
+	"CommanderDJ\n"
 	"\n"
 	"\n"
 	"Readme Staff:\n"

code/parse/sexp.cpp

@@ -10491,7 +10491,7 @@ void sexp_adjust_audio_volume(int node)
 
 	if (n > 0) {
 		int option = audio_volume_option_lookup(CTEXT(n));
-		if (option >= 0) {
+		if (option > 0) {
 			n = CDR(n);
 
 			float target_volume = 1.0f;
@@ -32111,7 +32111,7 @@ sexp_help_struct Sexp_help[] = {
 		"\tReturns a percentage from 0 to 100\r\n"
 		"\t1: Ship name\r\n" },
 
-	{ OP_GET_ETS_VALUE, "get-ets-value\r\n"
+	{ OP_GET_ETS_VALUE, "get-ets-values\r\n"
 		"\tGets one ETS index for a ship\r\n"
 		"\t1: ETS index to get, Engine|Shield|Weapon\r\n"
 		"\t2: Ship name\r\n"},
@@ -32432,8 +32432,8 @@ sexp_help_struct Sexp_help[] = {
 		"\tSets the amount of ammo for the specified ballistic bank\r\n"
 		"\t1: Ship name\r\n"
 		"\t2: Bank to check (0, 1, and 2 are legal banks)\r\n" 
-		"\t3: Number to set this bank to (If this is larger than the maximum, bank will be set to maximum).\r\n"
-		"\t4: Rearm Limit. Support ships will only supply this number of weapons (If this is larger than the maximum, bank will be set to maximum)"
+		"\t3: Number to set this bank to (If this is larger than the maximimum, bank will be set to maximum).\r\n"
+		"\t4: Rearm Limit. Support ships will only supply this number of weapons (If this is larger than the maximimum, bank will be set to maximum)"
 	},
 
 	// Karajorma
@@ -32441,8 +32441,8 @@ sexp_help_struct Sexp_help[] = {
 		"\tSets the amount of ammo for the specified bank\r\n"
 		"\t1: Ship name\r\n"
 		"\t2: Bank to check (0, 1, 2 and 3 are legal banks)\r\n" 
-		"\t3: Number to set this bank to (If this is larger than the maximum, bank will be set to maximum).\r\n"
-		"\t4: Rearm Limit. Support ships will only supply this number of weapons (If this is larger than the maximum, bank will be set to maximum)"
+		"\t3: Number to set this bank to (If this is larger than the maximimum, bank will be set to maximum).\r\n"
+		"\t4: Rearm Limit. Support ships will only supply this number of weapons (If this is larger than the maximimum, bank will be set to maximum)"
 	},
 	
 	// Karajorma
@@ -32451,8 +32451,8 @@ sexp_help_struct Sexp_help[] = {
 		"\t1: Ship name\r\n"
 		"\t2: Bank to check (0, 1 and 2 are legal banks)\r\n" 
 		"\t3: Name of the primary weapon \r\n"
-		"\t4: Number to set ammo of this bank to (If this is larger than the maximum, bank will be set to maximum)\r\n"
-		"\t5: Rearm Limit. Support ships will only supply this number of weapons (If this is larger than the maximum, bank will be set to maximum)"
+		"\t4: Number to set this bank to (If this is larger than the maximimum, bank will be set to maximum)\r\n"
+		"\t5: Rearm Limit. Support ships will only supply this number of weapons (If this is larger than the maximimum, bank will be set to maximum)"
 	},
 	
 	// Karajorma
@@ -32461,8 +32461,8 @@ sexp_help_struct Sexp_help[] = {
 		"\t1: Ship name\r\n"
 		"\t2: Bank to check (0, 1, 2 and 3 are legal banks)\r\n" 
 		"\t3: Name of the secondary weapon \r\n"
-		"\t4: Number to set ammo of this bank to (If this is larger than the maximum, bank will be set to maximum)\r\n"
-		"\t5: Rearm Limit. Support ships will only supply this number of weapons (If this is larger than the maximum, bank will be set to maximum)"
+		"\t4: Number to set this bank to (If this is larger than the maximimum, bank will be set to maximum)\r\n"
+		"\t5: Rearm Limit. Support ships will only supply this number of weapons (If this is larger than the maximimum, bank will be set to maximum)"
 	},
 
 

code/ship/ship.cpp

@@ -83,7 +83,17 @@
 #include "debugconsole/console.h"
 #include "debugconsole/console.h"
 #include "math/vecmat.h"
+#include "cfile/cfilesystem.h"
 
+#include "jansson.h"
+
+#ifndef JSON_REAL_PRECISION
+#define JSON_REAL_PRECISION(n) 0
+#endif
+
+#ifndef JSON_ESCAPE_SLASH
+#define JSON_ESCAPE_SLASH 0
+#endif
 
 #define NUM_SHIP_SUBSYSTEM_SETS			20		// number of subobject sets to use (because of the fact that it's a linked list,
 												//     we can't easily go fully dynamic)
@@ -1256,6 +1266,60 @@ void parse_ship_particle_effect(ship_info* sip, particle_effect* pe, char *id_st
 	}
 }
 
+void parse_allowed_weapons(ship_info *sip, bool is_primary, bool is_dogfight)
+{
+	int i, num_allowed;
+	int allowed_weapons[MAX_WEAPON_TYPES];
+	const int max_banks = (is_primary ? MAX_SHIP_PRIMARY_BANKS : MAX_SHIP_SECONDARY_BANKS);
+	const int weapon_type = (is_dogfight ? DOGFIGHT_WEAPON : REGULAR_WEAPON);
+	const int offset = (is_primary ? 0 : MAX_SHIP_PRIMARY_BANKS);
+	const char *allowed_banks_str = is_primary ? (is_dogfight ? "$Allowed Dogfight PBanks:" : "$Allowed PBanks:")
+		: (is_dogfight ? "$Allowed Dogfight SBanks:" : "$Allowed SBanks:");
+	const char *bank_type_str = is_primary ? "primary" : "secondary";
+
+	// Goober5000 - fixed Bobboau's implementation of restricted banks
+	int bank;
+
+	// Set the weapons filter used in weapons loadout (for primary weapons)
+	if (optional_string(allowed_banks_str))
+	{
+		bank = -1;
+
+		while (check_for_string("("))
+		{
+			bank++;
+
+			// make sure we don't specify more than we have banks for
+			if (bank >= max_banks)
+			{
+				Warning(LOCATION, "%s bank-specific loadout for %s exceeds permissible number of %s banks.  Ignoring the rest...", allowed_banks_str, sip->name, bank_type_str);
+				bank--;
+				break;
+			}
+
+			num_allowed = stuff_int_list(allowed_weapons, MAX_WEAPON_TYPES, WEAPON_LIST_TYPE);
+
+			// actually say which weapons are allowed
+			for ( i = 0; i < num_allowed; i++ )
+			{
+				if ( allowed_weapons[i] >= 0 )		// MK, Bug fix, 9/6/99.  Used to be "allowed_weapons" not "allowed_weapons[i]".
+				{
+					sip->allowed_bank_restricted_weapons[offset+bank][allowed_weapons[i]] |= weapon_type;
+				}
+			}
+		}
+
+		// set flags if need be
+		if (bank > 0)	// meaning there was a restricted bank table entry
+		{
+			for (i=0; i<=bank; i++)
+			{
+				sip->restricted_loadout_flag[offset+i] |= weapon_type;
+			}
+		}
+	}
+}
+
 /**
  * Common method for parsing ship/subsystem primary/secondary weapons so that the parser doesn't flip out in the event of a problem.
  *
@@ -1355,8 +1419,7 @@ int parse_and_add_briefing_icon_info()
 int parse_ship_values(ship_info* sip, bool first_time, bool replace)
 {
 	char buf[SHIP_MULTITEXT_LENGTH];
-	int i, j, num_allowed;
-	int allowed_weapons[MAX_WEAPON_TYPES];
+	int i, j;
 	int rtn = 0;
 	char name_tmp[NAME_LENGTH];
 	
@@ -1628,7 +1691,7 @@ int parse_ship_values(ship_info* sip, bool first_time, bool replace)
 	if (optional_string("$Enable Team Colors:")) {
 		stuff_boolean(&sip->uses_team_colors);
 		sip->default_team_name = "None";
-	} 
+	}
 
 	if (optional_string("$Default Team:")) {
 		char temp[NAME_LENGTH];
@@ -2221,86 +2284,9 @@ int parse_ship_values(ship_info* sip, bool first_time, bool replace)
 		stuff_float( &sip->weapon_model_draw_distance );
 	}
 
-	// Goober5000 - fixed Bobboau's implementation of restricted banks
-	int bank;
-
 	// Set the weapons filter used in weapons loadout (for primary weapons)
-	if (optional_string("$Allowed PBanks:"))
-	{
-		bank = -1;
-
-		while (check_for_string("("))
-		{
-			bank++;
-
-			// make sure we don't specify more than we have banks for
-			if (bank >= MAX_SHIP_PRIMARY_BANKS)
-			{
-				Warning(LOCATION, "$Allowed PBanks bank-specific loadout for %s exceeds permissible number of primary banks.  Ignoring the rest...", sip->name);
-				bank--;
-				break;
-			}
-
-			num_allowed = stuff_int_list(allowed_weapons, MAX_WEAPON_TYPES, WEAPON_LIST_TYPE);
-
-			// actually say which weapons are allowed
-			for ( i = 0; i < num_allowed; i++ )
-			{
-				if ( allowed_weapons[i] >= 0 )		// MK, Bug fix, 9/6/99.  Used to be "allowed_weapons" not "allowed_weapons[i]".
-				{
-					sip->allowed_bank_restricted_weapons[bank][allowed_weapons[i]] |= REGULAR_WEAPON;
-				}
-			}
-		}
-
-		// set flags if need be
-		if (bank > 0)	// meaning there was a restricted bank table entry
-		{
-			for (i=0; i<=bank; i++)
-			{
-				sip->restricted_loadout_flag[i] |= REGULAR_WEAPON;
-			}
-		}
-	}
-
-	// Set the weapons filter used in weapons loadout (for primary weapons)
-	if (optional_string("$Allowed Dogfight PBanks:"))
-	{
-		bank = -1;
-
-		while (check_for_string("("))
-		{
-			bank++;
-
-			// make sure we don't specify more than we have banks for
-			if (bank >= MAX_SHIP_PRIMARY_BANKS)
-			{
-				Warning(LOCATION, "$Allowed Dogfight PBanks bank-specific loadout for %s exceeds permissible number of primary banks.  Ignoring the rest...", sip->name);
-				bank--;
-				break;
-			}
-
-			num_allowed = stuff_int_list(allowed_weapons, MAX_WEAPON_TYPES, WEAPON_LIST_TYPE);
-
-			// actually say which weapons are allowed
-			for ( i = 0; i < num_allowed; i++ )
-			{
-				if ( allowed_weapons[i] >= 0 )		// MK, Bug fix, 9/6/99.  Used to be "allowed_weapons" not "allowed_weapons[i]".
-				{
-					sip->allowed_bank_restricted_weapons[bank][allowed_weapons[i]] |= DOGFIGHT_WEAPON;
-				}
-			}
-		}
-
-		// set flags if need be
-		if (bank > 0)	// meaning there was a restricted bank table entry
-		{
-			for (i=0; i<=bank; i++)
-			{
-				sip->restricted_loadout_flag[i] |= DOGFIGHT_WEAPON;
-			}
-		}
-	}
+	parse_allowed_weapons(sip, true, false);
+	parse_allowed_weapons(sip, true, true);
 
 	// Get primary bank weapons
 	parse_weapon_bank(sip, true, &sip->num_primary_banks, sip->primary_bank_weapons, sip->primary_bank_ammo_capacity);
@@ -2312,82 +2298,8 @@ int parse_ship_values(ship_info* sip, bool first_time, bool replace)
 	}
 
 	// Set the weapons filter used in weapons loadout (for secondary weapons)
-	if (optional_string("$Allowed SBanks:"))
-	{
-		bank = -1;
-
-		while (check_for_string("("))
-		{
-			bank++;
-
-			// make sure we don't specify more than we have banks for
-			if (bank >= MAX_SHIP_SECONDARY_BANKS)
-			{
-				Warning(LOCATION, "$Allowed SBanks bank-specific loadout for %s exceeds permissible number of secondary banks.  Ignoring the rest...", sip->name);
-				bank--;
-				break;
-			}
-
-			num_allowed = stuff_int_list(allowed_weapons, MAX_WEAPON_TYPES, WEAPON_LIST_TYPE);
-
-			// actually say which weapons are allowed
-			for ( i = 0; i < num_allowed; i++ )
-			{
-				if ( allowed_weapons[i] >= 0 )		// MK, Bug fix, 9/6/99.  Used to be "allowed_weapons" not "allowed_weapons[i]".
-				{
-					sip->allowed_bank_restricted_weapons[MAX_SHIP_PRIMARY_BANKS+bank][allowed_weapons[i]] |= REGULAR_WEAPON;
-				}
-			}
-		}
-
-		// set flags if need be
-		if (bank > 0)	// meaning there was a restricted bank table entry
-		{
-			for (i=0; i<=bank; i++)
-			{
-				sip->restricted_loadout_flag[MAX_SHIP_PRIMARY_BANKS+i] |= REGULAR_WEAPON;
-			}
-		}
-	}
-
-	// Set the weapons filter used in weapons loadout (for secondary weapons)
-	if (optional_string("$Allowed Dogfight SBanks:"))
-	{
-		bank = -1;
-
-		while (check_for_string("("))
-		{
-			bank++;
-
-			// make sure we don't specify more than we have banks for
-			if (bank >= MAX_SHIP_SECONDARY_BANKS)
-			{
-				Warning(LOCATION, "$Allowed Dogfight SBanks bank-specific loadout for %s exceeds permissible number of secondary banks.  Ignoring the rest...", sip->name);
-				bank--;
-				break;
-			}
-
-			num_allowed = stuff_int_list(allowed_weapons, MAX_WEAPON_TYPES, WEAPON_LIST_TYPE);
-
-			// actually say which weapons are allowed
-			for ( i = 0; i < num_allowed; i++ )
-			{
-				if ( allowed_weapons[i] >= 0 )		// MK, Bug fix, 9/6/99.  Used to be "allowed_weapons" not "allowed_weapons[i]".
-				{
-					sip->allowed_bank_restricted_weapons[MAX_SHIP_PRIMARY_BANKS+bank][allowed_weapons[i]] |= DOGFIGHT_WEAPON;
-				}
-			}
-		}
-
-		// set flags if need be
-		if (bank > 0)	// meaning there was a restricted bank table entry
-		{
-			for (i=0; i<=bank; i++)
-			{
-				sip->restricted_loadout_flag[MAX_SHIP_PRIMARY_BANKS+i] |= DOGFIGHT_WEAPON;
-			}
-		}
-	}
+	parse_allowed_weapons(sip, false, false);
+	parse_allowed_weapons(sip, false, true);
 
 	// Get secondary bank weapons
 	parse_weapon_bank(sip, false, &sip->num_secondary_banks, sip->secondary_bank_weapons, sip->secondary_bank_ammo_capacity);
@@ -17888,3 +17800,421 @@ int get_nearest_bbox_point(object *ship_obj, vec3d *start, vec3d *box_pt)
 
 	return inside;
 }
+
+bool check_restricted(const ship_info* sip, json_t* bank_json, bool restricted, int bank, int weapon_idx, int weapon_type)
+{
+	// bank is a bank index, weapon_idx is a weapon type.  sip->allowed_bank_restricted_weapons[bank][weapon_idx] is a 2-bit bitfield.
+	if(sip->allowed_bank_restricted_weapons[bank][weapon_idx] & weapon_type)
+	{
+		json_array_append(bank_json, json_string(Weapon_info[weapon_idx].name));
+		if(!restricted && bank > 0)
+		{
+			restricted = true;
+		}
+	}
+
+	return restricted;
+}
+
+void append_weapons(const ship_info* sip, json_t* ship_data, bool is_primary, int bank_offset)
+{
+	int bank, weapon_idx, num_banks;
+	bool restricted = false, dogfight_restricted = false;
+	json_t *Allowed_banks = json_array();
+	json_t *Allowed_dogfight_banks = json_array();
+	json_t *Default_banks = json_array();
+	json_t *Bank_capacity = json_array();
+	json_t *Show_models = json_array();
+	char Allowed_Banks_name[16], Allowed_Dogfight_Banks_name[25], Default_Banks_name[16], Bank_Capacity_name[16], Show_Models_name[23], type_name[10];
+
+	if(is_primary)
+	{
+		num_banks = sip->num_primary_banks;
+		strcpy_s(type_name, "Primary");
+	}
+	else
+	{
+		num_banks = sip->num_secondary_banks;
+		strcpy_s(type_name, "Secondary");
+	}
+	sprintf(Allowed_Banks_name, "$Allowed %cBanks", type_name[0]);
+	sprintf(Allowed_Dogfight_Banks_name, "$Allowed Dogfight %cBanks", type_name[0]);
+	sprintf(Default_Banks_name, "$Default %cBanks", type_name[0]);
+	sprintf(Bank_Capacity_name, "$%cBank Capacity", type_name[0]);
+	sprintf(Show_Models_name, "$Show %s Models", type_name);
+
+	for(bank = bank_offset; bank < bank_offset + num_banks; bank++)
+	{
+		json_t *regular_bank = json_array();
+		json_t *dogfight_bank = json_array();
+		for(weapon_idx = 0; weapon_idx < Num_weapon_types; weapon_idx++)
+		{
+			restricted = check_restricted(sip, regular_bank, restricted, bank, weapon_idx, REGULAR_WEAPON);
+			dogfight_restricted = check_restricted(sip, dogfight_bank, dogfight_restricted, bank, weapon_idx, DOGFIGHT_WEAPON);
+		}
+		json_array_append(Allowed_banks, regular_bank);
+		json_array_append(Allowed_dogfight_banks, dogfight_bank);
+
+		if(is_primary)
+		{
+			json_array_append(Default_banks, json_string(Weapon_info[sip->primary_bank_weapons[bank - bank_offset]].name));
+			json_array_append(Bank_capacity, json_integer(sip->primary_bank_ammo_capacity[bank - bank_offset]));
+			json_array_append(Show_models, json_boolean(sip->draw_primary_models[bank - bank_offset]));
+		}
+		else
+		{
+			json_array_append(Default_banks, json_string(Weapon_info[sip->secondary_bank_weapons[bank - bank_offset]].name));
+			json_array_append(Bank_capacity, json_integer(sip->secondary_bank_ammo_capacity[bank - bank_offset]));
+			json_array_append(Show_models, json_boolean(sip->draw_secondary_models[bank - bank_offset]));
+		}
+	}
+	json_object_set_new(ship_data, Allowed_Banks_name, (restricted ? Allowed_banks : json_array_get(Allowed_banks, 0)));
+	json_object_set_new(ship_data, Allowed_Dogfight_Banks_name, (dogfight_restricted ? Allowed_dogfight_banks : json_array_get(Allowed_dogfight_banks, 0)));
+	json_object_set_new(ship_data, Default_Banks_name, Default_banks);
+	json_object_set_new(ship_data, Bank_Capacity_name, Bank_capacity);
+	json_object_set_new(ship_data, Show_Models_name, Show_models);
+}
+
+void ship_output_json(const char *outfile)
+{
+	mprintf(("Exporting ship data to json.\n"));
+
+	int i;
+	json_t *ships_obj = json_object();
+	json_t *Ships = json_array();
+	ship_info *sip;
+	species_info *species;
+	char full_name[MAX_PATH_LEN];
+
+	json_object_set_new(ships_obj, "default_player_ship", json_string(default_player_ship));
+
+	// Loop over the Ship_info array and add a new entry to ship_info_arr each time
+	for (i = 0; i < Num_ship_classes; i++)
+	{
+		int j;
+		sip = &Ship_info[i];
+		species = &Species_info[sip->species];
+		json_t *ship_data = json_object();
+		json_t *Displays = json_array();
+		json_t *Replacements = json_array();
+		json_t *Cockpit_offset = json_object();
+		json_t *Detail_distance = json_array();
+		json_t *ND = json_array();
+		json_t *Impact = json_object();
+		json_t *Collision_Physics = json_object();
+		json_t *Debris = json_object();
+		json_t *Max_Velocity = json_object();
+		json_t *Rotation_Time = json_object();
+		json_t *Anims = json_array();
+		json_t *Model_point_shield_controls = json_array();
+		size_t insert_index, shield_point;
+		json_t *quadrant;
+		json_t *Shield_color = json_object();
+
+		json_object_set_new(ship_data, "$Name", json_string(sip->name));
+		json_object_set_new(ship_data, "$Alt Name", json_string(sip->alt_name));
+		json_object_set_new(ship_data, "$Short Name", json_string(sip->short_name));
+		json_object_set_new(ship_data, "$Species", json_string(species->species_name));
+		json_object_set_new(ship_data, "+Type", json_string(sip->type_str));
+		json_object_set_new(ship_data, "+Maneuverability", json_string(sip->maneuverability_str));
+		json_object_set_new(ship_data, "+Armor", json_string(sip->armor_str));
+		json_object_set_new(ship_data, "+Manufacturer", json_string(sip->manufacturer_str));
+		json_object_set_new(ship_data, "+Description", json_string(sip->desc));
+		json_object_set_new(ship_data, "+Tech Title", json_string(sip->tech_title));
+		json_object_set_new(ship_data, "+Tech Description", json_string(sip->tech_desc));
+		json_object_set_new(ship_data, "+Length", json_string(sip->ship_length));
+		json_object_set_new(ship_data, "+Gun Mounts", json_string(sip->gun_mounts));
+		json_object_set_new(ship_data, "+Missile Banks", json_string(sip->missile_banks));
+		switch(sip->selection_effect)
+		{
+			case 0:
+				json_object_set_new(ship_data, "$Selection Effect", json_string("off"));
+				break;
+			case 1:
+				json_object_set_new(ship_data, "$Selection Effect", json_string("FS1"));
+				break;
+			case 2:
+			default:
+				json_object_set_new(ship_data, "$Selection Effect", json_string("FS2"));
+		}
+		json_object_set_new(ship_data, "$Cockpit POF file", json_string(sip->cockpit_pof_file));
+		json_object_set_new(Cockpit_offset, "x", json_real(sip->cockpit_offset.xyz.x));
+		json_object_set_new(Cockpit_offset, "y", json_real(sip->cockpit_offset.xyz.y));
+		json_object_set_new(Cockpit_offset, "z", json_real(sip->cockpit_offset.xyz.z));
+		json_object_set_new(ship_data, "+Cockpit offset", Cockpit_offset);
+		for(SCP_vector<cockpit_display_info>::iterator display = sip->displays.begin(); display != sip->displays.end(); ++display)
+		{
+			json_t *display_data = json_object();
+			json_t *offsets = json_array();
+			json_t *size = json_array();
+
+			json_object_set_new(display_data, "+Texture", json_string(display->filename));
+			json_array_append_new(offsets, json_integer(display->offset[0]));
+			json_array_append_new(offsets, json_integer(display->offset[1]));
+			json_object_set_new(display_data, "+Offsets", offsets);
+			json_array_append_new(size, json_integer(display->size[0]));
+			json_array_append_new(size, json_integer(display->size[1]));
+			json_object_set_new(display_data, "+Size", size);
+			json_object_set_new(display_data, "+Background", json_string(display->bg_filename));
+			json_object_set_new(display_data, "+Foreground", json_string(display->fg_filename));
+			json_object_set_new(display_data, "+Display Name", json_string(display->name));
+
+			json_array_append_new(Displays, display_data);
+		}
+		json_object_set_new(ship_data, "$Cockpit Display", Displays);
+		json_object_set_new(ship_data, "$POF file", json_string(sip->pof_file));
+		for(SCP_vector<texture_replace>::iterator replace = sip->replacement_textures.begin(); replace != sip->replacement_textures.end(); ++replace)
+		{
+			json_t *replace_data = json_object();
+
+			json_object_set_new(replace_data, "+old", json_string(replace->old_texture));
+			json_object_set_new(replace_data, "+new", json_string(replace->new_texture));
+
+			json_array_append_new(Replacements, replace_data);
+		}
+		json_object_set_new(ship_data, "$Texture Replace", Replacements);
+		json_object_set_new(ship_data, "$POF target file", json_string(sip->pof_file_hud));
+		json_object_set_new(ship_data, "$POF target LOD", json_integer(sip->hud_target_lod));
+		for (j = 0; j < sip->num_detail_levels; j++)
+		{
+			json_array_append_new(Detail_distance, json_integer(sip->detail_distance[j]));
+		}
+		json_object_set_new(ship_data, "$Detail distance", Detail_distance);
+		for (j = 0; j < sip->num_nondark_colors; j++)
+		{
+			json_t *nd_values = json_object();
+
+			json_object_set_new(nd_values, "red", json_integer(sip->nondark_colors[j][0]));
+			json_object_set_new(nd_values, "green", json_integer(sip->nondark_colors[j][1]));
+			json_object_set_new(nd_values, "blue", json_integer(sip->nondark_colors[j][2]));
+
+			json_array_append_new(ND, nd_values);
+		}
+		json_object_set_new(ship_data, "$ND", ND);
+		json_object_set_new(ship_data, "$Enable Team Colors", json_boolean(sip->uses_team_colors));
+		json_object_set_new(ship_data, "$Default Team", json_string(sip->default_team_name.c_str()));
+		json_object_set_new(ship_data, "$Damage Lightning Type", json_string(Lightning_types[sip->damage_lightning_type]));
+		if(sip->collision_damage_type_idx > -1 && sip->collision_damage_type_idx < Damage_types.size())
+		{
+			json_object_set_new(Impact, "+Damage Type", json_string(Damage_types.at(sip->collision_damage_type_idx).name));
+		}
+		else
+		{
+			json_object_set_new(Impact, "+Damage Type", json_null());
+		}
+		json_object_set_new(ship_data, "$Impact", Impact);
+		// Skipping spews
+		json_object_set_new(Collision_Physics, "+Bounce", json_real(sip->collision_physics.bounce));
+		json_object_set_new(Collision_Physics, "+Both Small Bounce", json_real(sip->collision_physics.both_small_bounce));
+		json_object_set_new(Collision_Physics, "+Friction", json_real(sip->collision_physics.friction));
+		json_object_set_new(Collision_Physics, "+Rotation Factor", json_real(sip->collision_physics.rotation_factor));
+		json_object_set_new(Collision_Physics, "+Landing Max Forward Vel", json_real(sip->collision_physics.landing_max_z));
+		json_object_set_new(Collision_Physics, "+Landing Min Forward Vel", json_real(sip->collision_physics.landing_min_z));
+		json_object_set_new(Collision_Physics, "+Landing Max Descent Vel", json_real(sip->collision_physics.landing_min_y));
+		json_object_set_new(Collision_Physics, "+Landing Max Horizontal Vel", json_real(sip->collision_physics.landing_max_x));
+		json_object_set_new(Collision_Physics, "+Landing Max Angle", json_real(sip->collision_physics.landing_max_angle));
+		json_object_set_new(Collision_Physics, "+Landing Min Angle", json_real(sip->collision_physics.landing_min_angle));
+		json_object_set_new(Collision_Physics, "+Landing Max Rotate Angle", json_real(sip->collision_physics.landing_max_rot_angle));
+		json_object_set_new(Collision_Physics, "+Reorient Max Forward Vel", json_real(sip->collision_physics.reorient_max_z));
+		json_object_set_new(Collision_Physics, "+Reorient Min Forward Vel", json_real(sip->collision_physics.reorient_min_z));
+		json_object_set_new(Collision_Physics, "+Reorient Max Descent Vel", json_real(sip->collision_physics.reorient_min_y));
+		json_object_set_new(Collision_Physics, "+Reorient Max Horizontal Vel", json_real(sip->collision_physics.reorient_max_x));
+		json_object_set_new(Collision_Physics, "+Reorient Max Angle", json_real(sip->collision_physics.reorient_max_angle));
+		json_object_set_new(Collision_Physics, "+Reorient Min Angle", json_real(sip->collision_physics.reorient_min_angle));
+		json_object_set_new(Collision_Physics, "+Reorient Max Rotate Angle", json_real(sip->collision_physics.reorient_max_rot_angle));
+		json_object_set_new(Collision_Physics, "+Reorient Speed Mult", json_real(sip->collision_physics.reorient_mult));
+		json_object_set_new(Collision_Physics, "+Landing Rest Angle", json_real(sip->collision_physics.landing_rest_angle));
+		if(sip->collision_damage_type_idx > -1 && sip->collision_damage_type_idx < Snds.size())
+		{
+			json_object_set_new(Collision_Physics, "+Landing Sound", json_string(Snds.at(sip->collision_physics.landing_sound_idx).name.c_str()));
+		}
+		else
+		{
+			json_object_set_new(Collision_Physics, "+Landing Sound", json_null());
+		}
+		json_object_set_new(ship_data, "$Collision Physics", Collision_Physics);
+		json_object_set_new(Debris, "+Min Lifetime", json_real(sip->debris_min_lifetime));
+		json_object_set_new(Debris, "+Max Lifetime", json_real(sip->debris_max_lifetime));
+		json_object_set_new(Debris, "+Min Speed", json_real(sip->debris_min_speed));
+		json_object_set_new(Debris, "+Max Speed", json_real(sip->debris_max_speed));
+		json_object_set_new(Debris, "+Min Rotation speed", json_real(sip->debris_min_rotspeed));
+		json_object_set_new(Debris, "+Max Rotation speed", json_real(sip->debris_max_rotspeed));
+		if(sip->collision_damage_type_idx > -1 && sip->collision_damage_type_idx < Damage_types.size())
+		{
+			json_object_set_new(Debris, "+Damage Type", json_string(Damage_types.at(sip->debris_damage_type_idx).name));
+		}
+		else
+		{
+			json_object_set_new(Debris, "+Damage Type", json_null());
+		}
+		json_object_set_new(Debris, "+Min Hitpoints", json_real(sip->debris_min_hitpoints));
+		json_object_set_new(Debris, "+Max Hitpoints", json_real(sip->debris_max_hitpoints));
+		json_object_set_new(Debris, "+Damage Multiplier", json_real(sip->debris_damage_mult));
+		json_object_set_new(Debris, "+Lightning Arc Percent", json_real(sip->debris_arc_percent * 100.0f));
+		json_object_set_new(ship_data, "$Debris", Debris);
+		json_object_set_new(ship_data, "$Density", json_real(sip->density));
+		json_object_set_new(ship_data, "$Damp", json_real(sip->damp));
+		json_object_set_new(ship_data, "$Rotdamp", json_real(sip->rotdamp));
+		json_object_set_new(ship_data, "$Banking Constant", json_real(sip->delta_bank_const));
+		json_object_set_new(Max_Velocity, "x", json_real(sip->max_vel.xyz.x));
+		json_object_set_new(Max_Velocity, "y", json_real(sip->max_vel.xyz.y));
+		json_object_set_new(Max_Velocity, "z", json_real(sip->max_vel.xyz.z));
+		json_object_set_new(ship_data, "$Max Velocity", Max_Velocity);
+		json_object_set_new(Rotation_Time, "x", json_real(sip->rotation_time.xyz.x));
+		json_object_set_new(Rotation_Time, "y", json_real(sip->rotation_time.xyz.y));
+		json_object_set_new(Rotation_Time, "z", json_real(sip->rotation_time.xyz.z));
+		json_object_set_new(ship_data, "$Rotation Time", Rotation_Time);
+		json_object_set_new(ship_data, "$Rear Velocity", json_real(sip->max_rear_vel));
+		json_object_set_new(ship_data, "$Forward accel", json_real(sip->forward_accel));
+		json_object_set_new(ship_data, "$Forward decel", json_real(sip->forward_decel));
+		json_object_set_new(ship_data, "$Slide accel", json_real(sip->slide_accel));
+		json_object_set_new(ship_data, "$Slide decel", json_real(sip->slide_decel));
+		json_object_set_new(ship_data, "$Glide", json_boolean(sip->can_glide));
+		json_object_set_new(ship_data, "+Dynamic Glide Cap", json_boolean(sip->glide_dynamic_cap));
+		json_object_set_new(ship_data, "+Max Glide Speed", json_real(sip->glide_cap));
+		json_object_set_new(ship_data, "+Glide Accel Mult", json_real(sip->glide_accel_mult));
+		json_object_set_new(ship_data, "$Use Newtonian Dampening", json_boolean(sip->use_newtonian_damp));
+		json_object_set_new(ship_data, "$Autoaim FOV", json_integer(sip->autoaim_fov));
+		// Skipping convergence, ugh...
+		json_object_set_new(ship_data, "$Warpin type", json_string(Warp_types[sip->warpin_type]));
+		if(sip->warpin_snd_start > -1 && sip->warpin_snd_start < Snds.size())
+		{
+			json_object_set_new(ship_data, "$Warpin Start Sound", json_string(Snds.at(sip->warpin_snd_start).name.c_str()));
+		}
+		else
+		{
+			json_object_set_new(ship_data, "$Warpin Start Sound", json_null());
+		}
+		if(sip->warpin_snd_end > -1 && sip->warpin_snd_end < Snds.size())
+		{
+			json_object_set_new(ship_data, "$Warpin End Sound", json_string(Snds.at(sip->warpin_snd_end).name.c_str()));
+		}
+		else
+		{
+			json_object_set_new(ship_data, "$Warpin End Sound", json_null());
+		}
+		json_object_set_new(ship_data, "$Warpin speed", json_real(sip->warpin_speed));
+		json_object_set_new(ship_data, "$Warpin time", json_real(sip->warpin_time));
+		json_object_set_new(ship_data, "$Warpin decel exp", json_real(sip->warpin_decel_exp));
+		json_object_set_new(ship_data, "$Warpin radius", json_real(sip->warpin_radius));
+		json_object_set_new(ship_data, "$Warpin animation", json_string(sip->warpin_anim));
+		json_object_set_new(ship_data, "$Warpout type", json_string(Warp_types[sip->warpout_type]));
+		if(sip->warpout_snd_start > -1 && sip->warpout_snd_start < Snds.size())
+		{
+			json_object_set_new(ship_data, "$Warpout Start Sound", json_string(Snds.at(sip->warpout_snd_start).name.c_str()));
+		}
+		else
+		{
+			json_object_set_new(ship_data, "$Warpout Start Sound", json_null());
+		}
+		if(sip->warpout_snd_end > -1 && sip->warpout_snd_end < Snds.size())
+		{
+			json_object_set_new(ship_data, "$Warpout End Sound", json_string(Snds.at(sip->warpout_snd_end).name.c_str()));
+		}
+		else
+		{
+			json_object_set_new(ship_data, "$Warpout End Sound", json_null());
+		}
+		json_object_set_new(ship_data, "$Warpout engage time", json_real(sip->warpout_engage_time));
+		json_object_set_new(ship_data, "$Warpout speed", json_real(sip->warpout_speed));
+		json_object_set_new(ship_data, "$Warpout time", json_real(sip->warpout_time));
+		json_object_set_new(ship_data, "$Warpout accel exp", json_real(sip->warpout_accel_exp));
+		json_object_set_new(ship_data, "$Warpout radius", json_real(sip->warpout_radius));
+		json_object_set_new(ship_data, "$Warpout animation", json_string(sip->warpout_anim));
+		json_object_set_new(ship_data, "$Player warpout speed", json_real(sip->warpout_player_speed));
+		json_object_set_new(ship_data, "$Expl inner rad", json_real(sip->shockwave.inner_rad));
+		json_object_set_new(ship_data, "$Expl outer rad", json_real(sip->shockwave.outer_rad));
+		json_object_set_new(ship_data, "$Expl damage", json_real(sip->shockwave.damage));
+		json_object_set_new(ship_data, "$Expl blast", json_real(sip->shockwave.blast));
+		json_object_set_new(ship_data, "$Expl Propogates", json_boolean(sip->explosion_propagates));
+		json_object_set_new(ship_data, "$Propagating Expl Radius Multiplier", json_real(sip->prop_exp_rad_mult));
+		json_object_set_new(ship_data, "$Expl Visual Rad", json_real(sip->big_exp_visual_rad));
+		json_object_set_new(ship_data, "$Base Death-Roll Time", json_integer(sip->death_roll_base_time));
+		json_object_set_new(ship_data, "$Death-Roll Explosion Radius Mult", json_real(sip->death_roll_r_mult));
+		json_object_set_new(ship_data, "$Death-Roll Explosion Intensity Mult", json_real(sip->death_roll_time_mult));
+		json_object_set_new(ship_data, "$Death FX Explosion Radius Mult", json_real(sip->death_fx_r_mult));
+		json_object_set_new(ship_data, "$Death FX Explosion Count", json_integer(sip->death_fx_count));
+		// Skipping more particle stuff for now
+		json_object_set_new(ship_data, "$Vaporize Percent Chance", json_real(sip->vaporize_chance));
+		if(sip->shockwave.damage_type_idx > -1 && sip->shockwave.damage_type_idx < Damage_types.size())
+		{
+			json_object_set_new(ship_data, "$Shockwave Damage Type", json_string(Damage_types.at(sip->shockwave.damage_type_idx).name));
+		}
+		else
+		{
+			json_object_set_new(ship_data, "$Shockwave Damage Type", json_null());
+		}
+		json_object_set_new(ship_data, "$Shockwave Speed", json_real(sip->shockwave.speed));
+		json_object_set_new(ship_data, "$Shockwave Count", json_real(sip->shockwave_count));
+		json_object_set_new(ship_data, "$Shockwave model", json_string(sip->shockwave.pof_name));
+		json_object_set_new(ship_data, "$Shockwave name", json_string(sip->shockwave.name));
+		for(SCP_vector<int>::iterator anim = sip->explosion_bitmap_anims.begin(); anim != sip->explosion_bitmap_anims.end(); ++anim)
+		{
+			json_array_append_new(Anims, json_integer(*anim));
+		}
+		json_object_set_new(ship_data, "$Explosion Animations", Anims);
+		json_object_set_new(ship_data, "$Weapon Model Draw Distance", json_real(sip->weapon_model_draw_distance));
+		append_weapons(sip, ship_data, true, 0);
+		append_weapons(sip, ship_data, false, MAX_SHIP_PRIMARY_BANKS);
+		json_object_set_new(ship_data, "$Shields", json_real(sip->max_shield_strength));
+		json_object_set_new(ship_data, "+Auto Spread", json_real(sip->auto_shield_spread));
+		json_object_set_new(ship_data, "+Allow Bypass", json_boolean(sip->auto_shield_spread_bypass));
+		json_object_set_new(ship_data, "+Spread From LOD", json_integer(sip->auto_shield_spread_from_lod));
+		for(j = 0; j < sizeof(sip->shield_point_augment_ctrls) / sizeof(int); j++)
+		{
+			if(sip->shield_point_augment_ctrls[j] != -1)
+			{
+				insert_index = 0;
+				json_array_foreach(Model_point_shield_controls, shield_point, quadrant)
+				{
+					insert_index = shield_point;
+					if(sip->shield_point_augment_ctrls[j] < shield_point)
+					{
+						break;
+					}
+				}
+				switch(j)
+				{
+					case 0:
+						json_array_insert_new(Model_point_shield_controls, insert_index, json_string("right"));
+						break;
+					case 1:
+						json_array_insert_new(Model_point_shield_controls, insert_index, json_string("front"));
+						break;
+					case 2:
+						json_array_insert_new(Model_point_shield_controls, insert_index, json_string("rear"));
+						break;
+					case 3:
+						json_array_insert_new(Model_point_shield_controls, insert_index, json_string("left"));
+						break;
+				}
+			}
+		}
+		json_object_set_new(ship_data, "$Model Point Shield Controls", Model_point_shield_controls);
+		json_object_set_new(Shield_color, "red", json_integer(sip->shield_color[0]));
+		json_object_set_new(Shield_color, "green", json_integer(sip->shield_color[1]));
+		json_object_set_new(Shield_color, "blue", json_integer(sip->shield_color[2]));
+		json_object_set_new(ship_data, "$Shield Color", Shield_color);
+		json_object_set_new(ship_data, "$Power Output", json_real(sip->power_output));
+		json_object_set_new(ship_data, "$Shield Regeneration Rate", json_real(sip->max_shield_regen_per_second));
+		json_object_set_new(ship_data, "$Support Shield Repair Rate", json_real(sip->sup_shield_repair_rate * 100));
+		json_object_set_new(ship_data, "$Weapon Regeneration Rate", json_real(sip->max_weapon_regen_per_second));
+		json_object_set_new(ship_data, "$Max Oclk Speed", json_real(sip->max_overclocked_speed));
+		json_object_set_new(ship_data, "$Max Weapon Eng", json_real(sip->max_weapon_reserve));
+		json_object_set_new(ship_data, "$Hitpoints", json_real(sip->max_hull_strength));
+		json_object_set_new(ship_data, "$Hull Repair Rate", json_real(sip->hull_repair_rate * 100));
+		json_object_set_new(ship_data, "$Support Hull Repair Rate", json_real(sip->sup_hull_repair_rate * 100));
+		json_object_set_new(ship_data, "$Subsystem Repair Rate", json_real(sip->subsys_repair_rate * 100));
+		json_object_set_new(ship_data, "$Support Subsystem Repair Rate", json_real(sip->sup_subsys_repair_rate * 100));
+		json_object_set_new(ship_data, "$Armor Type", ( (sip->armor_type_idx > -1) ? json_string(Armor_types[sip->armor_type_idx].GetNamePtr()) : json_null() ));
+		json_object_set_new(ship_data, "$Shield Armor Type", ( (sip->shield_armor_type_idx > -1) ? json_string(Armor_types[sip->shield_armor_type_idx].GetNamePtr()) : json_null() ));
+		// Skipping flags
+
+		json_array_append_new(Ships, ship_data);
+	}
+
+	json_object_set_new(ships_obj, "Ships", Ships);
+
+	cf_create_default_path_string(full_name, sizeof(full_name) - 1, CF_TYPE_ROOT, outfile);
+	json_dump_file(ships_obj, full_name, JSON_ESCAPE_SLASH | JSON_INDENT(4) | JSON_PRESERVE_ORDER | JSON_REAL_PRECISION(4));
+}

code/ship/ship.h

@@ -2006,4 +2006,6 @@ int get_default_player_ship_index();
  */
 int get_nearest_bbox_point(object *ship_obj, vec3d *start, vec3d *box_pt);
 
+extern void ship_output_json(const char *outfile);
+
 #endif

code/sound/sound.cpp

@@ -12,7 +12,6 @@
 #include "render/3d.h"
 #include "sound/sound.h"
 #include "sound/audiostr.h"
-#include "gamesnd/eventmusic.h"
 #include "cmdline/cmdline.h"
 #include "osapi/osapi.h"
 #include "globalincs/vmallocator.h"
@@ -1519,12 +1518,6 @@ void adjust_volume_on_frame(float* volume_now, aav* data)
 	//apply change
 	*volume_now = data->start_volume + (data->delta * done);
 	CLAMP(*volume_now, 0.0f, 1.0f);
-
-	// if setting music volume, trigger volume change in playing tracks
-	// done here in order to avoid setting music volume in every frame regardless if it changed or not
-	if (&aav_music_volume == volume_now) {
-		audiostream_set_volume_all(Master_event_music_volume * aav_music_volume, ASF_EVENTMUSIC);
-	}
 }
 
 void snd_aav_init()

code/weapon/beam.cpp

@@ -2338,30 +2338,6 @@ int beam_collide_ship(obj_pair *pair)
 	int hull_enter_collision = model_collide(&mc_hull_enter);
 	int hull_exit_collision = (beam_will_tool_target(b, ship_objp)) ? model_collide(&mc_hull_exit) : 0;
 
-    // If we have a range less than the "far" range, check if the ray actually hit within the range
-    if (b->range < BEAM_FAR_LENGTH
-        && (shield_collision || hull_enter_collision || hull_exit_collision))
-    {
-        // We can't use hit_dist as "1" is the distance between p0 and p1
-        float rangeSq = b->range * b->range;
-
-        // actually make sure that the collision points are within range of our beam
-        if (shield_collision && vm_vec_dist_squared(&b->last_start, &mc_shield.hit_point_world) > rangeSq)
-        {
-            shield_collision = 0;
-        }
-
-        if (hull_enter_collision && vm_vec_dist_squared(&b->last_start, &mc_hull_enter.hit_point_world) > rangeSq)
-        {
-            hull_enter_collision = 0;
-        }
-
-        if (hull_exit_collision && vm_vec_dist_squared(&mc_hull_exit.hit_point_world, &b->last_start) > rangeSq)
-        {
-            hull_exit_collision = 0;
-        }
-    }
-
 	// check shields for impact
 	// (tooled ships are probably not going to be maintaining a shield over their exit hole,
 	// therefore we need only check the entrance, just as with conventional weapons)

code/weapon/weapon.h

@@ -670,4 +670,7 @@ void weapon_pause_sounds();
 // Unpauses all running weapon sounds
 void weapon_unpause_sounds();
 
+// Dumps parsed weapon data to a json file
+extern void weapons_output_json(const char *outfile);
+
 #endif

code/weapon/weapons.cpp

@@ -7022,3 +7022,8 @@ void weapon_unpause_sounds()
 	// Pause all beam sounds
 	beam_unpause_sounds();
 }
+
+void weapons_output_json(const char *outfile)
+{
+	mprintf(("Exporting weapon data to json.\n"));
+}

configure.ac

@@ -2,7 +2,7 @@ dnl configure.ac for fs2_open
 dnl
 dnl $Id: configure.ac,v 1.31.2.4 2007-05-28 19:36:12 taylor Exp $
 
-AC_INIT(fs2_open, 3.7.2)
+AC_INIT(fs2_open, 3.7.1)
 AC_CONFIG_SRCDIR(code/freespace2/freespace.cpp)
 
 dnl we need at least version 2.54 of autoconf

jansson/LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2009-2013 Petri Lehtinen <[email protected]>
+Copyright (c) 2009-2014 Petri Lehtinen <[email protected]>
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

jansson/dump.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  *
  * Jansson is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.
@@ -22,6 +22,9 @@
 #define MAX_INTEGER_STR_LENGTH  100
 #define MAX_REAL_STR_LENGTH     100
 
+#define FLAGS_TO_INDENT(f)      ((f) & 0x1F)
+#define FLAGS_TO_PRECISION(f)   (((f) >> 11) & 0x1F)
+
 struct object_key {
     size_t serial;
     const char *key;
@@ -45,9 +48,9 @@ static const char whitespace[] = "                                ";
 
 static int dump_indent(size_t flags, int depth, int space, json_dump_callback_t dump, void *data)
 {
-    if(JSON_INDENT(flags) > 0)
+    if(FLAGS_TO_INDENT(flags) > 0)
     {
-        int i, ws_count = JSON_INDENT(flags);
+        int i, ws_count = FLAGS_TO_INDENT(flags);
 
         if(dump("\n", 1, data))
             return -1;
@@ -65,24 +68,25 @@ static int dump_indent(size_t flags, int depth, int space, json_dump_callback_t
     return 0;
 }
 
-static int dump_string(const char *str, json_dump_callback_t dump, void *data, size_t flags)
+static int dump_string(const char *str, size_t len, json_dump_callback_t dump, void *data, size_t flags)
 {
-    const char *pos, *end;
+    const char *pos, *end, *lim;
     int32_t codepoint;
 
     if(dump("\"", 1, data))
         return -1;
 
     end = pos = str;
+    lim = str + len;
     while(1)
     {
         const char *text;
         char seq[13];
         int length;
 
-        while(*end)
+        while(end < lim)
         {
-            end = utf8_iterate(pos, &codepoint);
+            end = utf8_iterate(pos, lim - pos, &codepoint);
             if(!end)
                 return -1;
 
@@ -126,7 +130,7 @@ static int dump_string(const char *str, json_dump_callback_t dump, void *data, s
                 /* codepoint is in BMP */
                 if(codepoint < 0x10000)
                 {
-                    sprintf(seq, "\\u%04x", codepoint);
+                    sprintf(seq, "\\u%04X", codepoint);
                     length = 6;
                 }
 
@@ -139,7 +143,7 @@ static int dump_string(const char *str, json_dump_callback_t dump, void *data, s
                     first = 0xD800 | ((codepoint & 0xffc00) >> 10);
                     last = 0xDC00 | (codepoint & 0x003ff);
 
-                    sprintf(seq, "\\u%04x\\u%04x", first, last);
+                    sprintf(seq, "\\u%04X\\u%04X", first, last);
                     length = 12;
                 }
 
@@ -207,7 +211,8 @@ static int do_dump(const json_t *json, size_t flags, int depth,
             int size;
             double value = json_real_value(json);
 
-            size = jsonp_dtostr(buffer, MAX_REAL_STR_LENGTH, value);
+            size = jsonp_dtostr(buffer, MAX_REAL_STR_LENGTH, value,
+                                FLAGS_TO_PRECISION(flags));
             if(size < 0)
                 return -1;
 
@@ -215,7 +220,7 @@ static int do_dump(const json_t *json, size_t flags, int depth,
         }
 
         case JSON_STRING:
-            return dump_string(json_string_value(json), dump, data, flags);
+            return dump_string(json_string_value(json), json_string_length(json), dump, data, flags);
 
         case JSON_ARRAY:
         {
@@ -336,7 +341,7 @@ static int do_dump(const json_t *json, size_t flags, int depth,
                     value = json_object_get(json, key);
                     assert(value);
 
-                    dump_string(key, dump, data, flags);
+                    dump_string(key, strlen(key), dump, data, flags);
                     if(dump(separator, separator_length, data) ||
                        do_dump(value, flags, depth + 1, dump, data))
                     {
@@ -372,8 +377,9 @@ static int do_dump(const json_t *json, size_t flags, int depth,
                 while(iter)
                 {
                     void *next = json_object_iter_next((json_t *)json, iter);
+                    const char *key = json_object_iter_key(iter);
 
-                    dump_string(json_object_iter_key(iter), dump, data, flags);
+                    dump_string(key, strlen(key), dump, data, flags);
                     if(dump(separator, separator_length, data) ||
                        do_dump(json_object_iter_value(iter), flags, depth + 1,
                                dump, data))

jansson/hashtable.c

@@ -1,12 +1,21 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  *
  * This library is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.
  */
 
+#if HAVE_CONFIG_H
+#include <jansson_private_config.h>
+#endif
+
 #include <stdlib.h>
 #include <string.h>
+
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+
 #include <jansson_config.h>   /* for JSON_INLINE */
 #include "jansson_private.h"  /* for container_of() */
 #include "hashtable.h"
@@ -15,24 +24,13 @@ typedef struct hashtable_list list_t;
 typedef struct hashtable_pair pair_t;
 typedef struct hashtable_bucket bucket_t;
 
+extern volatile uint32_t hashtable_seed;
+
+/* Implementation of the hash function */
+#include "lookup3.h"
+
 #define list_to_pair(list_)  container_of(list_, pair_t, list)
-
-/* From http://www.cse.yorku.ca/~oz/hash.html */
-static size_t hash_str(const void *ptr)
-{
-    const char *str = (const char *)ptr;
-
-    size_t hash = 5381;
-    size_t c;
-
-    while((c = (size_t)*str))
-    {
-        hash = ((hash << 5) + hash) + c;
-        str++;
-    }
-
-    return hash;
-}
+#define hash_str(key)        ((size_t)hashlittle((key), strlen(key), hashtable_seed))
 
 static JSON_INLINE void list_init(list_t *list)
 {
@@ -74,19 +72,6 @@ static void insert_to_bucket(hashtable_t *hashtable, bucket_t *bucket,
     }
 }
 
-static const size_t primes[] = {
-    5, 13, 23, 53, 97, 193, 389, 769, 1543, 3079, 6151, 12289, 24593,
-    49157, 98317, 196613, 393241, 786433, 1572869, 3145739, 6291469,
-    12582917, 25165843, 50331653, 100663319, 201326611, 402653189,
-    805306457, 1610612741
-};
-
-static JSON_INLINE size_t num_buckets(hashtable_t *hashtable)
-{
-    return primes[hashtable->num_buckets];
-}
-
-
 static pair_t *hashtable_find_pair(hashtable_t *hashtable, bucket_t *bucket,
                                    const char *key, size_t hash)
 {
@@ -120,7 +105,7 @@ static int hashtable_do_del(hashtable_t *hashtable,
     bucket_t *bucket;
     size_t index;
 
-    index = hash % num_buckets(hashtable);
+    index = hash & hashmask(hashtable->order);
     bucket = &hashtable->buckets[index];
 
     pair = hashtable_find_pair(hashtable, bucket, key, hash);
@@ -167,14 +152,14 @@ static int hashtable_do_rehash(hashtable_t *hashtable)
 
     jsonp_free(hashtable->buckets);
 
-    hashtable->num_buckets++;
-    new_size = num_buckets(hashtable);
+    hashtable->order++;
+    new_size = hashsize(hashtable->order);
 
     hashtable->buckets = jsonp_malloc(new_size * sizeof(bucket_t));
     if(!hashtable->buckets)
         return -1;
 
-    for(i = 0; i < num_buckets(hashtable); i++)
+    for(i = 0; i < hashsize(hashtable->order); i++)
     {
         hashtable->buckets[i].first = hashtable->buckets[i].last =
             &hashtable->list;
@@ -199,14 +184,14 @@ int hashtable_init(hashtable_t *hashtable)
     size_t i;
 
     hashtable->size = 0;
-    hashtable->num_buckets = 0;  /* index to primes[] */
-    hashtable->buckets = jsonp_malloc(num_buckets(hashtable) * sizeof(bucket_t));
+    hashtable->order = 3;
+    hashtable->buckets = jsonp_malloc(hashsize(hashtable->order) * sizeof(bucket_t));
     if(!hashtable->buckets)
         return -1;
 
     list_init(&hashtable->list);
 
-    for(i = 0; i < num_buckets(hashtable); i++)
+    for(i = 0; i < hashsize(hashtable->order); i++)
     {
         hashtable->buckets[i].first = hashtable->buckets[i].last =
             &hashtable->list;
@@ -230,12 +215,12 @@ int hashtable_set(hashtable_t *hashtable,
     size_t hash, index;
 
     /* rehash if the load ratio exceeds 1 */
-    if(hashtable->size >= num_buckets(hashtable))
+    if(hashtable->size >= hashsize(hashtable->order))
         if(hashtable_do_rehash(hashtable))
             return -1;
 
     hash = hash_str(key);
-    index = hash % num_buckets(hashtable);
+    index = hash & hashmask(hashtable->order);
     bucket = &hashtable->buckets[index];
     pair = hashtable_find_pair(hashtable, bucket, key, hash);
 
@@ -249,7 +234,14 @@ int hashtable_set(hashtable_t *hashtable,
         /* offsetof(...) returns the size of pair_t without the last,
            flexible member. This way, the correct amount is
            allocated. */
-        pair = jsonp_malloc(offsetof(pair_t, key) + strlen(key) + 1);
+
+        size_t len = strlen(key);
+        if(len >= (size_t)-1 - offsetof(pair_t, key)) {
+            /* Avoid an overflow if the key is very long */
+            return -1;
+        }
+
+        pair = jsonp_malloc(offsetof(pair_t, key) + len + 1);
         if(!pair)
             return -1;
 
@@ -273,7 +265,7 @@ void *hashtable_get(hashtable_t *hashtable, const char *key)
     bucket_t *bucket;
 
     hash = hash_str(key);
-    bucket = &hashtable->buckets[hash % num_buckets(hashtable)];
+    bucket = &hashtable->buckets[hash & hashmask(hashtable->order)];
 
     pair = hashtable_find_pair(hashtable, bucket, key, hash);
     if(!pair)
@@ -294,7 +286,7 @@ void hashtable_clear(hashtable_t *hashtable)
 
     hashtable_do_clear(hashtable);
 
-    for(i = 0; i < num_buckets(hashtable); i++)
+    for(i = 0; i < hashsize(hashtable->order); i++)
     {
         hashtable->buckets[i].first = hashtable->buckets[i].last =
             &hashtable->list;
@@ -316,7 +308,7 @@ void *hashtable_iter_at(hashtable_t *hashtable, const char *key)
     bucket_t *bucket;
 
     hash = hash_str(key);
-    bucket = &hashtable->buckets[hash % num_buckets(hashtable)];
+    bucket = &hashtable->buckets[hash & hashmask(hashtable->order)];
 
     pair = hashtable_find_pair(hashtable, bucket, key, hash);
     if(!pair)

jansson/hashtable.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  *
  * This library is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.
@@ -32,7 +32,7 @@ struct hashtable_bucket {
 typedef struct hashtable {
     size_t size;
     struct hashtable_bucket *buckets;
-    size_t num_buckets;  /* index to primes[] */
+    size_t order;  /* hashtable has pow(2, order) buckets */
     struct hashtable_list list;
 } hashtable_t;
 
@@ -40,6 +40,7 @@ typedef struct hashtable {
 #define hashtable_key_to_iter(key_) \
     (&(container_of(key_, struct hashtable_pair, key)->list))
 
+
 /**
  * hashtable_init - Initialize a hashtable object
  *

jansson/hashtable_seed.c

@@ -0,0 +1,277 @@
+/* Generate sizeof(uint32_t) bytes of as random data as possible to seed
+   the hash function.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include <jansson_private_config.h>
+#endif
+
+#include <stdio.h>
+#include <time.h>
+
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+
+#ifdef HAVE_FCNTL_H
+#include <fcntl.h>
+#endif
+
+#ifdef HAVE_SCHED_H
+#include <sched.h>
+#endif
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+
+#ifdef HAVE_SYS_TIME_H
+#include <sys/time.h>
+#endif
+
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+
+#if defined(_WIN32)
+/* For GetModuleHandle(), GetProcAddress() and GetCurrentProcessId() */
+#include <windows.h>
+#endif
+
+#include "jansson.h"
+
+
+static uint32_t buf_to_uint32(char *data) {
+    size_t i;
+    uint32_t result = 0;
+
+    for (i = 0; i < sizeof(uint32_t); i++)
+        result = (result << 8) | (unsigned char)data[i];
+
+    return result;
+}
+
+
+
+/* /dev/urandom */
+#if !defined(_WIN32) && defined(USE_URANDOM)
+static int seed_from_urandom(uint32_t *seed) {
+    /* Use unbuffered I/O if we have open(), close() and read(). Otherwise
+       fall back to fopen() */
+
+    char data[sizeof(uint32_t)];
+    int ok;
+
+#if defined(HAVE_OPEN) && defined(HAVE_CLOSE) && defined(HAVE_READ)
+    int urandom;
+    urandom = open("/dev/urandom", O_RDONLY);
+    if (urandom == -1)
+        return 1;
+
+    ok = read(urandom, data, sizeof(uint32_t)) == sizeof(uint32_t);
+    close(urandom);
+#else
+    FILE *urandom;
+
+    urandom = fopen("/dev/urandom", "rb");
+    if (!urandom)
+        return 1;
+
+    ok = fread(data, 1, sizeof(uint32_t), urandom) == sizeof(uint32_t);
+    fclose(urandom);
+#endif
+
+    if (!ok)
+        return 1;
+
+    *seed = buf_to_uint32(data);
+    return 0;
+}
+#endif
+
+/* Windows Crypto API */
+#if defined(_WIN32) && defined(USE_WINDOWS_CRYPTOAPI)
+#include <wincrypt.h>
+
+typedef BOOL (WINAPI *CRYPTACQUIRECONTEXTA)(HCRYPTPROV *phProv, LPCSTR pszContainer, LPCSTR pszProvider, DWORD dwProvType, DWORD dwFlags);
+typedef BOOL (WINAPI *CRYPTGENRANDOM)(HCRYPTPROV hProv, DWORD dwLen, BYTE *pbBuffer);
+typedef BOOL (WINAPI *CRYPTRELEASECONTEXT)(HCRYPTPROV hProv, DWORD dwFlags);
+
+static int seed_from_windows_cryptoapi(uint32_t *seed)
+{
+    HINSTANCE hAdvAPI32 = NULL;
+    CRYPTACQUIRECONTEXTA pCryptAcquireContext = NULL;
+    CRYPTGENRANDOM pCryptGenRandom = NULL;
+    CRYPTRELEASECONTEXT pCryptReleaseContext = NULL;
+    HCRYPTPROV hCryptProv = 0;
+    BYTE data[sizeof(uint32_t)];
+    int ok;
+
+    hAdvAPI32 = GetModuleHandle(TEXT("advapi32.dll"));
+    if(hAdvAPI32 == NULL)
+        return 1;
+
+    pCryptAcquireContext = (CRYPTACQUIRECONTEXTA)GetProcAddress(hAdvAPI32, "CryptAcquireContextA");
+    if (!pCryptAcquireContext)
+        return 1;
+
+    pCryptGenRandom = (CRYPTGENRANDOM)GetProcAddress(hAdvAPI32, "CryptGenRandom");
+    if (!pCryptGenRandom)
+        return 1;
+
+    pCryptReleaseContext = (CRYPTRELEASECONTEXT)GetProcAddress(hAdvAPI32, "CryptReleaseContext");
+    if (!pCryptReleaseContext)
+        return 1;
+
+    if (!pCryptAcquireContext(&hCryptProv, NULL, NULL, PROV_RSA_FULL, CRYPT_VERIFYCONTEXT))
+        return 1;
+
+    ok = pCryptGenRandom(hCryptProv, sizeof(uint32_t), data);
+    pCryptReleaseContext(hCryptProv, 0);
+
+    if (!ok)
+        return 1;
+
+    *seed = buf_to_uint32((char *)data);
+    return 0;
+}
+#endif
+
+/* gettimeofday() and getpid() */
+static int seed_from_timestamp_and_pid(uint32_t *seed) {
+#ifdef HAVE_GETTIMEOFDAY
+    /* XOR of seconds and microseconds */
+    struct timeval tv;
+    gettimeofday(&tv, NULL);
+    *seed = (uint32_t)tv.tv_sec ^ (uint32_t)tv.tv_usec;
+#else
+    /* Seconds only */
+    *seed = (uint32_t)time(NULL);
+#endif
+
+    /* XOR with PID for more randomness */
+#if defined(_WIN32)
+    *seed ^= (uint32_t)GetCurrentProcessId();
+#elif defined(HAVE_GETPID)
+    *seed ^= (uint32_t)getpid();
+#endif
+
+    return 0;
+}
+
+static uint32_t generate_seed() {
+    uint32_t seed;
+    int done = 0;
+
+#if !defined(_WIN32) && defined(USE_URANDOM)
+    if (!done && seed_from_urandom(&seed) == 0)
+        done = 1;
+#endif
+
+#if defined(_WIN32) && defined(USE_WINDOWS_CRYPTOAPI)
+    if (!done && seed_from_windows_cryptoapi(&seed) == 0)
+        done = 1;
+#endif
+
+    if (!done) {
+        /* Fall back to timestamp and PID if no better randomness is
+           available */
+        seed_from_timestamp_and_pid(&seed);
+    }
+
+    /* Make sure the seed is never zero */
+    if (seed == 0)
+        seed = 1;
+
+    return seed;
+}
+
+
+volatile uint32_t hashtable_seed = 0;
+
+#if defined(HAVE_ATOMIC_BUILTINS) && (defined(HAVE_SCHED_YIELD) || !defined(_WIN32))
+static volatile char seed_initialized = 0;
+
+void json_object_seed(size_t seed) {
+    uint32_t new_seed = (uint32_t)seed;
+
+    if (hashtable_seed == 0) {
+        if (__atomic_test_and_set(&seed_initialized, __ATOMIC_RELAXED) == 0) {
+            /* Do the seeding ourselves */
+            if (new_seed == 0)
+                new_seed = generate_seed();
+
+            __atomic_store_n(&hashtable_seed, new_seed, __ATOMIC_RELEASE);
+        } else {
+            /* Wait for another thread to do the seeding */
+            do {
+#ifdef HAVE_SCHED_YIELD
+                sched_yield();
+#endif
+            } while(__atomic_load_n(&hashtable_seed, __ATOMIC_ACQUIRE) == 0);
+        }
+    }
+}
+#elif defined(HAVE_SYNC_BUILTINS) && (defined(HAVE_SCHED_YIELD) || !defined(_WIN32))
+void json_object_seed(size_t seed) {
+    uint32_t new_seed = (uint32_t)seed;
+
+    if (hashtable_seed == 0) {
+        if (new_seed == 0) {
+            /* Explicit synchronization fences are not supported by the
+               __sync builtins, so every thread getting here has to
+               generate the seed value.
+            */
+            new_seed = generate_seed();
+        }
+
+        do {
+            if (__sync_bool_compare_and_swap(&hashtable_seed, 0, new_seed)) {
+                /* We were the first to seed */
+                break;
+            } else {
+                /* Wait for another thread to do the seeding */
+#ifdef HAVE_SCHED_YIELD
+                sched_yield();
+#endif
+            }
+        } while(hashtable_seed == 0);
+    }
+}
+#elif defined(_WIN32)
+static long seed_initialized = 0;
+void json_object_seed(size_t seed) {
+    uint32_t new_seed = (uint32_t)seed;
+
+    if (hashtable_seed == 0) {
+        if (InterlockedIncrement(&seed_initialized) == 1) {
+            /* Do the seeding ourselves */
+            if (new_seed == 0)
+                new_seed = generate_seed();
+
+            hashtable_seed = new_seed;
+        } else {
+            /* Wait for another thread to do the seeding */
+            do {
+                SwitchToThread();
+            } while (hashtable_seed == 0);
+        }
+    }
+}
+#else
+/* Fall back to a thread-unsafe version */
+void json_object_seed(size_t seed) {
+    uint32_t new_seed = (uint32_t)seed;
+
+    if (hashtable_seed == 0) {
+        if (new_seed == 0)
+            new_seed = generate_seed();
+
+        hashtable_seed = new_seed;
+    }
+}
+#endif

jansson/jansson.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  *
  * Jansson is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.
@@ -21,11 +21,11 @@ extern "C" {
 /* version */
 
 #define JANSSON_MAJOR_VERSION  2
-#define JANSSON_MINOR_VERSION  5
+#define JANSSON_MINOR_VERSION  7
 #define JANSSON_MICRO_VERSION  0
 
 /* Micro version is omitted if it's 0 */
-#define JANSSON_VERSION  "2.5"
+#define JANSSON_VERSION  "2.7"
 
 /* Version as a 3-byte hex number, e.g. 0x010201 == 1.2.1. Use this
    for numeric comparisons, e.g. #if JANSSON_VERSION_HEX >= ... */
@@ -67,23 +67,26 @@ typedef long json_int_t;
 #endif
 
 #define json_typeof(json)      ((json)->type)
-#define json_is_object(json)   (json && json_typeof(json) == JSON_OBJECT)
-#define json_is_array(json)    (json && json_typeof(json) == JSON_ARRAY)
-#define json_is_string(json)   (json && json_typeof(json) == JSON_STRING)
-#define json_is_integer(json)  (json && json_typeof(json) == JSON_INTEGER)
-#define json_is_real(json)     (json && json_typeof(json) == JSON_REAL)
+#define json_is_object(json)   ((json) && json_typeof(json) == JSON_OBJECT)
+#define json_is_array(json)    ((json) && json_typeof(json) == JSON_ARRAY)
+#define json_is_string(json)   ((json) && json_typeof(json) == JSON_STRING)
+#define json_is_integer(json)  ((json) && json_typeof(json) == JSON_INTEGER)
+#define json_is_real(json)     ((json) && json_typeof(json) == JSON_REAL)
 #define json_is_number(json)   (json_is_integer(json) || json_is_real(json))
-#define json_is_true(json)     (json && json_typeof(json) == JSON_TRUE)
-#define json_is_false(json)    (json && json_typeof(json) == JSON_FALSE)
+#define json_is_true(json)     ((json) && json_typeof(json) == JSON_TRUE)
+#define json_is_false(json)    ((json) && json_typeof(json) == JSON_FALSE)
+#define json_boolean_value     json_is_true
 #define json_is_boolean(json)  (json_is_true(json) || json_is_false(json))
-#define json_is_null(json)     (json && json_typeof(json) == JSON_NULL)
+#define json_is_null(json)     ((json) && json_typeof(json) == JSON_NULL)
 
 /* construction, destruction, reference counting */
 
 json_t *json_object(void);
 json_t *json_array(void);
 json_t *json_string(const char *value);
+json_t *json_stringn(const char *value, size_t len);
 json_t *json_string_nocheck(const char *value);
+json_t *json_stringn_nocheck(const char *value, size_t len);
 json_t *json_integer(json_int_t value);
 json_t *json_real(double value);
 json_t *json_true(void);
@@ -126,6 +129,7 @@ typedef struct {
 
 /* getters, setters, manipulation */
 
+void json_object_seed(size_t seed);
 size_t json_object_size(const json_t *object);
 json_t *json_object_get(const json_t *object, const char *key);
 int json_object_set_new(json_t *object, const char *key, json_t *value);
@@ -199,16 +203,18 @@ int json_array_insert(json_t *array, size_t ind, json_t *value)
 }
 
 const char *json_string_value(const json_t *string);
+size_t json_string_length(const json_t *string);
 json_int_t json_integer_value(const json_t *integer);
 double json_real_value(const json_t *real);
 double json_number_value(const json_t *json);
 
 int json_string_set(json_t *string, const char *value);
+int json_string_setn(json_t *string, const char *value, size_t len);
 int json_string_set_nocheck(json_t *string, const char *value);
+int json_string_setn_nocheck(json_t *string, const char *value, size_t len);
 int json_integer_set(json_t *integer, json_int_t value);
 int json_real_set(json_t *real, double value);
 
-
 /* pack, unpack */
 
 json_t *json_pack(const char *fmt, ...);
@@ -240,6 +246,7 @@ json_t *json_deep_copy(const json_t *value);
 #define JSON_DISABLE_EOF_CHECK  0x2
 #define JSON_DECODE_ANY         0x4
 #define JSON_DECODE_INT_AS_REAL 0x8
+#define JSON_ALLOW_NUL          0x10
 
 typedef size_t (*json_load_callback_t)(void *buffer, size_t buflen, void *data);
 
@@ -252,13 +259,15 @@ json_t *json_load_callback(json_load_callback_t callback, void *data, size_t fla
 
 /* encoding */
 
-#define JSON_INDENT(n)      (n & 0x1F)
-#define JSON_COMPACT        0x20
-#define JSON_ENSURE_ASCII   0x40
-#define JSON_SORT_KEYS      0x80
-#define JSON_PRESERVE_ORDER 0x100
-#define JSON_ENCODE_ANY     0x200
-#define JSON_ESCAPE_SLASH   0x400
+#define JSON_MAX_INDENT         0x1F
+#define JSON_INDENT(n)          ((n) & JSON_MAX_INDENT)
+#define JSON_COMPACT            0x20
+#define JSON_ENSURE_ASCII       0x40
+#define JSON_SORT_KEYS          0x80
+#define JSON_PRESERVE_ORDER     0x100
+#define JSON_ENCODE_ANY         0x200
+#define JSON_ESCAPE_SLASH       0x400
+#define JSON_REAL_PRECISION(n)  (((n) & 0x1F) << 11)
 
 typedef int (*json_dump_callback_t)(const char *buffer, size_t size, void *data);
 

jansson/jansson_config.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2010-2014 Petri Lehtinen <petri@digip.org>
  *
  * Jansson is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.

jansson/jansson_private.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  *
  * Jansson is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.
@@ -49,6 +49,7 @@ typedef struct {
 typedef struct {
     json_t json;
     char *value;
+    size_t length;
 } json_string_t;
 
 typedef struct {
@@ -64,9 +65,13 @@ typedef struct {
 #define json_to_object(json_)  container_of(json_, json_object_t, json)
 #define json_to_array(json_)   container_of(json_, json_array_t, json)
 #define json_to_string(json_)  container_of(json_, json_string_t, json)
-#define json_to_real(json_)   container_of(json_, json_real_t, json)
+#define json_to_real(json_)    container_of(json_, json_real_t, json)
 #define json_to_integer(json_) container_of(json_, json_integer_t, json)
 
+/* Create a string by taking ownership of an existing buffer */
+json_t *jsonp_stringn_nocheck_own(const char *value, size_t len);
+
+/* Error message formatting */
 void jsonp_error_init(json_error_t *error, const char *source);
 void jsonp_error_set_source(json_error_t *error, const char *source);
 void jsonp_error_set(json_error_t *error, int line, int column,
@@ -76,13 +81,14 @@ void jsonp_error_vset(json_error_t *error, int line, int column,
 
 /* Locale independent string<->double conversions */
 int jsonp_strtod(strbuffer_t *strbuffer, double *out);
-int jsonp_dtostr(char *buffer, size_t size, double value);
+int jsonp_dtostr(char *buffer, size_t size, double value, int prec);
 
 /* Wrappers for custom memory functions */
 void* jsonp_malloc(size_t size);
 void jsonp_free(void *ptr);
 char *jsonp_strndup(const char *str, size_t length);
 char *jsonp_strdup(const char *str);
+char *jsonp_strndup(const char *str, size_t len);
 
 /* Windows compatibility */
 #ifdef _WIN32

jansson/load.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  *
  * Jansson is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.
@@ -63,7 +63,10 @@ typedef struct {
     strbuffer_t saved_text;
     int token;
     union {
-        char *string;
+        struct {
+            char *val;
+            size_t len;
+        } string;
         json_int_t integer;
         double real;
     } value;
@@ -279,6 +282,13 @@ static void lex_save_cached(lex_t *lex)
     }
 }
 
+static void lex_free_string(lex_t *lex)
+{
+    jsonp_free(lex->value.string.val);
+    lex->value.string.val = NULL;
+    lex->value.string.len = 0;
+}
+
 /* assumes that str points to 'u' plus at least 4 valid hex digits */
 static int32_t decode_unicode_escape(const char *str)
 {
@@ -297,7 +307,7 @@ static int32_t decode_unicode_escape(const char *str)
         else if(l_isupper(c))
             value += c - 'A' + 10;
         else
-            assert(0);
+            return -1;
     }
 
     return value;
@@ -310,7 +320,7 @@ static void lex_scan_string(lex_t *lex, json_error_t *error)
     char *t;
     int i;
 
-    lex->value.string = NULL;
+    lex->value.string.val = NULL;
     lex->token = TOKEN_INVALID;
 
     c = lex_get_save(lex, error);
@@ -365,14 +375,12 @@ static void lex_scan_string(lex_t *lex, json_error_t *error)
          - two \uXXXX escapes (length 12) forming an UTF-16 surrogate pair
            are converted to 4 bytes
     */
-    lex->value.string = jsonp_malloc(lex->saved_text.length + 1);
-    if(!lex->value.string) {
+    t = jsonp_malloc(lex->saved_text.length + 1);
+    if(!t) {
         /* this is not very nice, since TOKEN_INVALID is returned */
         goto out;
     }
-
-    /* the target */
-    t = lex->value.string;
+    lex->value.string.val = t;
 
     /* + 1 to skip the " */
     p = strbuffer_value(&lex->saved_text) + 1;
@@ -381,17 +389,24 @@ static void lex_scan_string(lex_t *lex, json_error_t *error)
         if(*p == '\\') {
             p++;
             if(*p == 'u') {
-                char buffer[4];
-                int length;
+                size_t length;
                 int32_t value;
 
                 value = decode_unicode_escape(p);
+                if(value < 0) {
+                    error_set(error, lex, "invalid Unicode escape '%.6s'", p - 1);
+                    goto out;
+                }
                 p += 5;
 
                 if(0xD800 <= value && value <= 0xDBFF) {
                     /* surrogate pair */
                     if(*p == '\\' && *(p + 1) == 'u') {
                         int32_t value2 = decode_unicode_escape(++p);
+                        if(value2 < 0) {
+                            error_set(error, lex, "invalid Unicode escape '%.6s'", p - 1);
+                            goto out;
+                        }
                         p += 5;
 
                         if(0xDC00 <= value2 && value2 <= 0xDFFF) {
@@ -420,16 +435,9 @@ static void lex_scan_string(lex_t *lex, json_error_t *error)
                     error_set(error, lex, "invalid Unicode '\\u%04X'", value);
                     goto out;
                 }
-                else if(value == 0)
-                {
-                    error_set(error, lex, "\\u0000 is not allowed");
-                    goto out;
-                }
 
-                if(utf8_encode(value, buffer, &length))
+                if(utf8_encode(value, t, &length))
                     assert(0);
-
-                memcpy(t, buffer, length);
                 t += length;
             }
             else {
@@ -451,11 +459,12 @@ static void lex_scan_string(lex_t *lex, json_error_t *error)
             *(t++) = *(p++);
     }
     *t = '\0';
+    lex->value.string.len = t - lex->value.string.val;
     lex->token = TOKEN_STRING;
     return;
 
 out:
-    jsonp_free(lex->value.string);
+    lex_free_string(lex);
 }
 
 #ifndef JANSSON_USING_CMAKE /* disabled if using cmake */
@@ -474,7 +483,7 @@ static int lex_scan_number(lex_t *lex, int c, json_error_t *error)
 {
     const char *saved_text;
     char *end;
-    double value;
+    double doubleval;
 
     lex->token = TOKEN_INVALID;
 
@@ -499,16 +508,16 @@ static int lex_scan_number(lex_t *lex, int c, json_error_t *error)
     }
 
     if(c != '.' && c != 'E' && c != 'e') {
-        json_int_t value;
+        json_int_t intval;
 
         lex_unget_unsave(lex, c);
 
         saved_text = strbuffer_value(&lex->saved_text);
 
         errno = 0;
-        value = json_strtoint(saved_text, &end, 10);
+        intval = json_strtoint(saved_text, &end, 10);
         if(errno == ERANGE) {
-            if(value < 0)
+            if(intval < 0)
                 error_set(error, lex, "too big negative integer");
             else
                 error_set(error, lex, "too big integer");
@@ -518,7 +527,7 @@ static int lex_scan_number(lex_t *lex, int c, json_error_t *error)
         assert(end == saved_text + lex->saved_text.length);
 
         lex->token = TOKEN_INTEGER;
-        lex->value.integer = value;
+        lex->value.integer = intval;
         return 0;
     }
 
@@ -552,13 +561,13 @@ static int lex_scan_number(lex_t *lex, int c, json_error_t *error)
 
     lex_unget_unsave(lex, c);
 
-    if(jsonp_strtod(&lex->saved_text, &value)) {
+    if(jsonp_strtod(&lex->saved_text, &doubleval)) {
         error_set(error, lex, "real number overflow");
         goto out;
     }
 
     lex->token = TOKEN_REAL;
-    lex->value.real = value;
+    lex->value.real = doubleval;
     return 0;
 
 out:
@@ -571,10 +580,8 @@ static int lex_scan(lex_t *lex, json_error_t *error)
 
     strbuffer_clear(&lex->saved_text);
 
-    if(lex->token == TOKEN_STRING) {
-        jsonp_free(lex->value.string);
-        lex->value.string = NULL;
-    }
+    if(lex->token == TOKEN_STRING)
+        lex_free_string(lex);
 
     c = lex_get(lex, error);
     while(c == ' ' || c == '\t' || c == '\n' || c == '\r')
@@ -635,13 +642,14 @@ out:
     return lex->token;
 }
 
-static char *lex_steal_string(lex_t *lex)
+static char *lex_steal_string(lex_t *lex, size_t *out_len)
 {
     char *result = NULL;
-    if(lex->token == TOKEN_STRING)
-    {
-        result = lex->value.string;
-        lex->value.string = NULL;
+    if(lex->token == TOKEN_STRING) {
+        result = lex->value.string.val;
+        *out_len = lex->value.string.len;
+        lex->value.string.val = NULL;
+        lex->value.string.len = 0;
     }
     return result;
 }
@@ -659,7 +667,7 @@ static int lex_init(lex_t *lex, get_func get, void *data)
 static void lex_close(lex_t *lex)
 {
     if(lex->token == TOKEN_STRING)
-        jsonp_free(lex->value.string);
+        lex_free_string(lex);
     strbuffer_close(&lex->saved_text);
 }
 
@@ -680,6 +688,7 @@ static json_t *parse_object(lex_t *lex, size_t flags, json_error_t *error)
 
     while(1) {
         char *key;
+        size_t len;
         json_t *value;
 
         if(lex->token != TOKEN_STRING) {
@@ -687,9 +696,14 @@ static json_t *parse_object(lex_t *lex, size_t flags, json_error_t *error)
             goto error;
         }
 
-        key = lex_steal_string(lex);
+        key = lex_steal_string(lex, &len);
         if(!key)
             return NULL;
+        if (memchr(key, '\0', len)) {
+            jsonp_free(key);
+            error_set(error, lex, "NUL byte in object key not supported");
+            goto error;
+        }
 
         if(flags & JSON_REJECT_DUPLICATES) {
             if(json_object_get(object, key)) {
@@ -788,7 +802,21 @@ static json_t *parse_value(lex_t *lex, size_t flags, json_error_t *error)
 
     switch(lex->token) {
         case TOKEN_STRING: {
-            json = json_string_nocheck(lex->value.string);
+            const char *value = lex->value.string.val;
+            size_t len = lex->value.string.len;
+
+            if(!(flags & JSON_ALLOW_NUL)) {
+                if(memchr(value, '\0', len)) {
+                    error_set(error, lex, "\\u0000 is not allowed without JSON_ALLOW_NUL");
+                    return NULL;
+                }
+            }
+
+            json = jsonp_stringn_nocheck_own(value, len);
+            if(json) {
+                lex->value.string.val = NULL;
+                lex->value.string.len = 0;
+            }
             break;
         }
 

jansson/lookup3.h

@@ -0,0 +1,381 @@
+/*
+-------------------------------------------------------------------------------
+lookup3.c, by Bob Jenkins, May 2006, Public Domain.
+
+These are functions for producing 32-bit hashes for hash table lookup.
+hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final() 
+are externally useful functions.  Routines to test the hash are included 
+if SELF_TEST is defined.  You can use this free for any purpose.  It's in
+the public domain.  It has no warranty.
+
+You probably want to use hashlittle().  hashlittle() and hashbig()
+hash byte arrays.  hashlittle() is is faster than hashbig() on
+little-endian machines.  Intel and AMD are little-endian machines.
+On second thought, you probably want hashlittle2(), which is identical to
+hashlittle() except it returns two 32-bit hashes for the price of one.  
+You could implement hashbig2() if you wanted but I haven't bothered here.
+
+If you want to find a hash of, say, exactly 7 integers, do
+  a = i1;  b = i2;  c = i3;
+  mix(a,b,c);
+  a += i4; b += i5; c += i6;
+  mix(a,b,c);
+  a += i7;
+  final(a,b,c);
+then use c as the hash value.  If you have a variable length array of
+4-byte integers to hash, use hashword().  If you have a byte array (like
+a character string), use hashlittle().  If you have several byte arrays, or
+a mix of things, see the comments above hashlittle().  
+
+Why is this so big?  I read 12 bytes at a time into 3 4-byte integers, 
+then mix those integers.  This is fast (you can do a lot more thorough
+mixing with 12*3 instructions on 3 integers than you can with 3 instructions
+on 1 byte), but shoehorning those bytes into integers efficiently is messy.
+-------------------------------------------------------------------------------
+*/
+
+#include <stdlib.h>
+
+#ifdef HAVE_CONFIG_H
+#include <jansson_private_config.h>
+#endif
+
+#ifdef HAVE_STDINT_H
+#include <stdint.h>     /* defines uint32_t etc */
+#endif
+
+#ifdef HAVE_SYS_PARAM_H
+#include <sys/param.h>  /* attempt to define endianness */
+#endif
+
+#ifdef HAVE_ENDIAN_H
+# include <endian.h>    /* attempt to define endianness */
+#endif
+
+/*
+ * My best guess at if you are big-endian or little-endian.  This may
+ * need adjustment.
+ */
+#if (defined(__BYTE_ORDER) && defined(__LITTLE_ENDIAN) && \
+     __BYTE_ORDER == __LITTLE_ENDIAN) || \
+    (defined(i386) || defined(__i386__) || defined(__i486__) || \
+     defined(__i586__) || defined(__i686__) || defined(vax) || defined(MIPSEL))
+# define HASH_LITTLE_ENDIAN 1
+# define HASH_BIG_ENDIAN 0
+#elif (defined(__BYTE_ORDER) && defined(__BIG_ENDIAN) && \
+       __BYTE_ORDER == __BIG_ENDIAN) || \
+      (defined(sparc) || defined(POWERPC) || defined(mc68000) || defined(sel))
+# define HASH_LITTLE_ENDIAN 0
+# define HASH_BIG_ENDIAN 1
+#else
+# define HASH_LITTLE_ENDIAN 0
+# define HASH_BIG_ENDIAN 0
+#endif
+
+#define hashsize(n) ((uint32_t)1<<(n))
+#define hashmask(n) (hashsize(n)-1)
+#define rot(x,k) (((x)<<(k)) | ((x)>>(32-(k))))
+
+/*
+-------------------------------------------------------------------------------
+mix -- mix 3 32-bit values reversibly.
+
+This is reversible, so any information in (a,b,c) before mix() is
+still in (a,b,c) after mix().
+
+If four pairs of (a,b,c) inputs are run through mix(), or through
+mix() in reverse, there are at least 32 bits of the output that
+are sometimes the same for one pair and different for another pair.
+This was tested for:
+* pairs that differed by one bit, by two bits, in any combination
+  of top bits of (a,b,c), or in any combination of bottom bits of
+  (a,b,c).
+* "differ" is defined as +, -, ^, or ~^.  For + and -, I transformed
+  the output delta to a Gray code (a^(a>>1)) so a string of 1's (as
+  is commonly produced by subtraction) look like a single 1-bit
+  difference.
+* the base values were pseudorandom, all zero but one bit set, or 
+  all zero plus a counter that starts at zero.
+
+Some k values for my "a-=c; a^=rot(c,k); c+=b;" arrangement that
+satisfy this are
+    4  6  8 16 19  4
+    9 15  3 18 27 15
+   14  9  3  7 17  3
+Well, "9 15 3 18 27 15" didn't quite get 32 bits diffing
+for "differ" defined as + with a one-bit base and a two-bit delta.  I
+used http://burtleburtle.net/bob/hash/avalanche.html to choose 
+the operations, constants, and arrangements of the variables.
+
+This does not achieve avalanche.  There are input bits of (a,b,c)
+that fail to affect some output bits of (a,b,c), especially of a.  The
+most thoroughly mixed value is c, but it doesn't really even achieve
+avalanche in c.
+
+This allows some parallelism.  Read-after-writes are good at doubling
+the number of bits affected, so the goal of mixing pulls in the opposite
+direction as the goal of parallelism.  I did what I could.  Rotates
+seem to cost as much as shifts on every machine I could lay my hands
+on, and rotates are much kinder to the top and bottom bits, so I used
+rotates.
+-------------------------------------------------------------------------------
+*/
+#define mix(a,b,c) \
+{ \
+  a -= c;  a ^= rot(c, 4);  c += b; \
+  b -= a;  b ^= rot(a, 6);  a += c; \
+  c -= b;  c ^= rot(b, 8);  b += a; \
+  a -= c;  a ^= rot(c,16);  c += b; \
+  b -= a;  b ^= rot(a,19);  a += c; \
+  c -= b;  c ^= rot(b, 4);  b += a; \
+}
+
+/*
+-------------------------------------------------------------------------------
+final -- final mixing of 3 32-bit values (a,b,c) into c
+
+Pairs of (a,b,c) values differing in only a few bits will usually
+produce values of c that look totally different.  This was tested for
+* pairs that differed by one bit, by two bits, in any combination
+  of top bits of (a,b,c), or in any combination of bottom bits of
+  (a,b,c).
+* "differ" is defined as +, -, ^, or ~^.  For + and -, I transformed
+  the output delta to a Gray code (a^(a>>1)) so a string of 1's (as
+  is commonly produced by subtraction) look like a single 1-bit
+  difference.
+* the base values were pseudorandom, all zero but one bit set, or 
+  all zero plus a counter that starts at zero.
+
+These constants passed:
+ 14 11 25 16 4 14 24
+ 12 14 25 16 4 14 24
+and these came close:
+  4  8 15 26 3 22 24
+ 10  8 15 26 3 22 24
+ 11  8 15 26 3 22 24
+-------------------------------------------------------------------------------
+*/
+#define final(a,b,c) \
+{ \
+  c ^= b; c -= rot(b,14); \
+  a ^= c; a -= rot(c,11); \
+  b ^= a; b -= rot(a,25); \
+  c ^= b; c -= rot(b,16); \
+  a ^= c; a -= rot(c,4);  \
+  b ^= a; b -= rot(a,14); \
+  c ^= b; c -= rot(b,24); \
+}
+
+/*
+-------------------------------------------------------------------------------
+hashlittle() -- hash a variable-length key into a 32-bit value
+  k       : the key (the unaligned variable-length array of bytes)
+  length  : the length of the key, counting by bytes
+  initval : can be any 4-byte value
+Returns a 32-bit value.  Every bit of the key affects every bit of
+the return value.  Two keys differing by one or two bits will have
+totally different hash values.
+
+The best hash table sizes are powers of 2.  There is no need to do
+mod a prime (mod is sooo slow!).  If you need less than 32 bits,
+use a bitmask.  For example, if you need only 10 bits, do
+  h = (h & hashmask(10));
+In which case, the hash table should have hashsize(10) elements.
+
+If you are hashing n strings (uint8_t **)k, do it like this:
+  for (i=0, h=0; i<n; ++i) h = hashlittle( k[i], len[i], h);
+
+By Bob Jenkins, 2006.  bob_jenkins@burtleburtle.net.  You may use this
+code any way you wish, private, educational, or commercial.  It's free.
+
+Use for hash table lookup, or anything where one collision in 2^^32 is
+acceptable.  Do NOT use for cryptographic purposes.
+-------------------------------------------------------------------------------
+*/
+
+static uint32_t hashlittle(const void *key, size_t length, uint32_t initval)
+{
+  uint32_t a,b,c;                                          /* internal state */
+  union { const void *ptr; size_t i; } u;     /* needed for Mac Powerbook G4 */
+
+  /* Set up the internal state */
+  a = b = c = 0xdeadbeef + ((uint32_t)length) + initval;
+
+  u.ptr = key;
+  if (HASH_LITTLE_ENDIAN && ((u.i & 0x3) == 0)) {
+    const uint32_t *k = (const uint32_t *)key;         /* read 32-bit chunks */
+
+/* Detect Valgrind or AddressSanitizer */
+#ifdef VALGRIND
+# define NO_MASKING_TRICK 1
+#else
+# if defined(__has_feature)  /* Clang */
+#  if __has_feature(address_sanitizer)  /* is ASAN enabled? */
+#   define NO_MASKING_TRICK 1
+#  endif
+# else
+#  if defined(__SANITIZE_ADDRESS__)  /* GCC 4.8.x, is ASAN enabled? */
+#   define NO_MASKING_TRICK 1
+#  endif
+# endif
+#endif
+
+#ifdef NO_MASKING_TRICK
+    const uint8_t  *k8;
+#endif
+
+    /*------ all but last block: aligned reads and affect 32 bits of (a,b,c) */
+    while (length > 12)
+    {
+      a += k[0];
+      b += k[1];
+      c += k[2];
+      mix(a,b,c);
+      length -= 12;
+      k += 3;
+    }
+
+    /*----------------------------- handle the last (probably partial) block */
+    /* 
+     * "k[2]&0xffffff" actually reads beyond the end of the string, but
+     * then masks off the part it's not allowed to read.  Because the
+     * string is aligned, the masked-off tail is in the same word as the
+     * rest of the string.  Every machine with memory protection I've seen
+     * does it on word boundaries, so is OK with this.  But VALGRIND will
+     * still catch it and complain.  The masking trick does make the hash
+     * noticably faster for short strings (like English words).
+     */
+#ifndef NO_MASKING_TRICK
+
+    switch(length)
+    {
+    case 12: c+=k[2]; b+=k[1]; a+=k[0]; break;
+    case 11: c+=k[2]&0xffffff; b+=k[1]; a+=k[0]; break;
+    case 10: c+=k[2]&0xffff; b+=k[1]; a+=k[0]; break;
+    case 9 : c+=k[2]&0xff; b+=k[1]; a+=k[0]; break;
+    case 8 : b+=k[1]; a+=k[0]; break;
+    case 7 : b+=k[1]&0xffffff; a+=k[0]; break;
+    case 6 : b+=k[1]&0xffff; a+=k[0]; break;
+    case 5 : b+=k[1]&0xff; a+=k[0]; break;
+    case 4 : a+=k[0]; break;
+    case 3 : a+=k[0]&0xffffff; break;
+    case 2 : a+=k[0]&0xffff; break;
+    case 1 : a+=k[0]&0xff; break;
+    case 0 : return c;              /* zero length strings require no mixing */
+    }
+
+#else /* make valgrind happy */
+
+    k8 = (const uint8_t *)k;
+    switch(length)
+    {
+    case 12: c+=k[2]; b+=k[1]; a+=k[0]; break;
+    case 11: c+=((uint32_t)k8[10])<<16;  /* fall through */
+    case 10: c+=((uint32_t)k8[9])<<8;    /* fall through */
+    case 9 : c+=k8[8];                   /* fall through */
+    case 8 : b+=k[1]; a+=k[0]; break;
+    case 7 : b+=((uint32_t)k8[6])<<16;   /* fall through */
+    case 6 : b+=((uint32_t)k8[5])<<8;    /* fall through */
+    case 5 : b+=k8[4];                   /* fall through */
+    case 4 : a+=k[0]; break;
+    case 3 : a+=((uint32_t)k8[2])<<16;   /* fall through */
+    case 2 : a+=((uint32_t)k8[1])<<8;    /* fall through */
+    case 1 : a+=k8[0]; break;
+    case 0 : return c;
+    }
+
+#endif /* !valgrind */
+
+  } else if (HASH_LITTLE_ENDIAN && ((u.i & 0x1) == 0)) {
+    const uint16_t *k = (const uint16_t *)key;         /* read 16-bit chunks */
+    const uint8_t  *k8;
+
+    /*--------------- all but last block: aligned reads and different mixing */
+    while (length > 12)
+    {
+      a += k[0] + (((uint32_t)k[1])<<16);
+      b += k[2] + (((uint32_t)k[3])<<16);
+      c += k[4] + (((uint32_t)k[5])<<16);
+      mix(a,b,c);
+      length -= 12;
+      k += 6;
+    }
+
+    /*----------------------------- handle the last (probably partial) block */
+    k8 = (const uint8_t *)k;
+    switch(length)
+    {
+    case 12: c+=k[4]+(((uint32_t)k[5])<<16);
+             b+=k[2]+(((uint32_t)k[3])<<16);
+             a+=k[0]+(((uint32_t)k[1])<<16);
+             break;
+    case 11: c+=((uint32_t)k8[10])<<16;     /* fall through */
+    case 10: c+=k[4];
+             b+=k[2]+(((uint32_t)k[3])<<16);
+             a+=k[0]+(((uint32_t)k[1])<<16);
+             break;
+    case 9 : c+=k8[8];                      /* fall through */
+    case 8 : b+=k[2]+(((uint32_t)k[3])<<16);
+             a+=k[0]+(((uint32_t)k[1])<<16);
+             break;
+    case 7 : b+=((uint32_t)k8[6])<<16;      /* fall through */
+    case 6 : b+=k[2];
+             a+=k[0]+(((uint32_t)k[1])<<16);
+             break;
+    case 5 : b+=k8[4];                      /* fall through */
+    case 4 : a+=k[0]+(((uint32_t)k[1])<<16);
+             break;
+    case 3 : a+=((uint32_t)k8[2])<<16;      /* fall through */
+    case 2 : a+=k[0];
+             break;
+    case 1 : a+=k8[0];
+             break;
+    case 0 : return c;                     /* zero length requires no mixing */
+    }
+
+  } else {                        /* need to read the key one byte at a time */
+    const uint8_t *k = (const uint8_t *)key;
+
+    /*--------------- all but the last block: affect some 32 bits of (a,b,c) */
+    while (length > 12)
+    {
+      a += k[0];
+      a += ((uint32_t)k[1])<<8;
+      a += ((uint32_t)k[2])<<16;
+      a += ((uint32_t)k[3])<<24;
+      b += k[4];
+      b += ((uint32_t)k[5])<<8;
+      b += ((uint32_t)k[6])<<16;
+      b += ((uint32_t)k[7])<<24;
+      c += k[8];
+      c += ((uint32_t)k[9])<<8;
+      c += ((uint32_t)k[10])<<16;
+      c += ((uint32_t)k[11])<<24;
+      mix(a,b,c);
+      length -= 12;
+      k += 12;
+    }
+
+    /*-------------------------------- last block: affect all 32 bits of (c) */
+    switch(length)                   /* all the case statements fall through */
+    {
+    case 12: c+=((uint32_t)k[11])<<24;
+    case 11: c+=((uint32_t)k[10])<<16;
+    case 10: c+=((uint32_t)k[9])<<8;
+    case 9 : c+=k[8];
+    case 8 : b+=((uint32_t)k[7])<<24;
+    case 7 : b+=((uint32_t)k[6])<<16;
+    case 6 : b+=((uint32_t)k[5])<<8;
+    case 5 : b+=k[4];
+    case 4 : a+=((uint32_t)k[3])<<24;
+    case 3 : a+=((uint32_t)k[2])<<16;
+    case 2 : a+=((uint32_t)k[1])<<8;
+    case 1 : a+=k[0];
+             break;
+    case 0 : return c;
+    }
+  }
+
+  final(a,b,c);
+  return c;
+}

jansson/memory.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  * Copyright (c) 2011-2012 Basile Starynkevitch <basile@starynkevitch.net>
  *
  * Jansson is free software; you can redistribute it and/or modify it
@@ -12,6 +12,10 @@
 #include "jansson.h"
 #include "jansson_private.h"
 
+/* C89 allows these to be macros */
+#undef malloc
+#undef free
+
 /* memory function pointers */
 static json_malloc_t do_malloc = malloc;
 static json_free_t do_free = free;
@@ -34,18 +38,19 @@ void jsonp_free(void *ptr)
 
 char *jsonp_strdup(const char *str)
 {
-    char *new_str;
-    size_t len;
+    return jsonp_strndup(str, strlen(str));
+}
 
-    len = strlen(str);
-    if(len == (size_t)-1)
-        return NULL;
+char *jsonp_strndup(const char *str, size_t len)
+{
+    char *new_str;
 
     new_str = jsonp_malloc(len + 1);
     if(!new_str)
         return NULL;
 
-    memcpy(new_str, str, len + 1);
+    memcpy(new_str, str, len);
+    new_str[len] = '\0';
     return new_str;
 }
 

jansson/pack_unpack.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  * Copyright (c) 2011-2012 Graeme Smecher <graeme.smecher@mail.mcgill.ca>
  *
  * Jansson is free software; you can redistribute it and/or modify
@@ -125,19 +125,18 @@ static json_t *pack(scanner_t *s, va_list *ap);
 /* ours will be set to 1 if jsonp_free() must be called for the result
    afterwards */
 static char *read_string(scanner_t *s, va_list *ap,
-                         const char *purpose, int *ours)
+                         const char *purpose, size_t *out_len, int *ours)
 {
     char t;
     strbuffer_t strbuff;
     const char *str;
     size_t length;
-    char *result;
 
     next_token(s);
     t = token(s);
     prev_token(s);
 
-    if(t != '#' && t != '+') {
+    if(t != '#' && t != '%' && t != '+') {
         /* Optimize the simple case */
         str = va_arg(*ap, const char *);
 
@@ -146,11 +145,14 @@ static char *read_string(scanner_t *s, va_list *ap,
             return NULL;
         }
 
-        if(!utf8_check_string(str, -1)) {
+        length = strlen(str);
+
+        if(!utf8_check_string(str, length)) {
             set_error(s, "<args>", "Invalid UTF-8 %s", purpose);
             return NULL;
         }
 
+        *out_len = length;
         *ours = 0;
         return (char *)str;
     }
@@ -170,6 +172,9 @@ static char *read_string(scanner_t *s, va_list *ap,
         if(token(s) == '#') {
             length = va_arg(*ap, int);
         }
+        else if(token(s) == '%') {
+            length = va_arg(*ap, size_t);
+        }
         else {
             prev_token(s);
             length = strlen(str);
@@ -188,15 +193,15 @@ static char *read_string(scanner_t *s, va_list *ap,
         }
     }
 
-    result = strbuffer_steal_value(&strbuff);
-
-    if(!utf8_check_string(result, -1)) {
+    if(!utf8_check_string(strbuff.value, strbuff.length)) {
         set_error(s, "<args>", "Invalid UTF-8 %s", purpose);
+        strbuffer_close(&strbuff);
         return NULL;
     }
 
+    *out_len = strbuff.length;
     *ours = 1;
-    return result;
+    return strbuffer_steal_value(&strbuff);
 }
 
 static json_t *pack_object(scanner_t *s, va_list *ap)
@@ -206,6 +211,7 @@ static json_t *pack_object(scanner_t *s, va_list *ap)
 
     while(token(s) != '}') {
         char *key;
+        size_t len;
         int ours;
         json_t *value;
 
@@ -219,15 +225,19 @@ static json_t *pack_object(scanner_t *s, va_list *ap)
             goto error;
         }
 
-        key = read_string(s, ap, "object key", &ours);
+        key = read_string(s, ap, "object key", &len, &ours);
         if(!key)
             goto error;
 
         next_token(s);
 
         value = pack(s, ap);
-        if(!value)
+        if(!value) {
+            if(ours)
+                jsonp_free(key);
+
             goto error;
+        }
 
         if(json_object_set_new_nocheck(object, key, value)) {
             if(ours)
@@ -290,20 +300,20 @@ static json_t *pack(scanner_t *s, va_list *ap)
         case '[':
             return pack_array(s, ap);
 
-        case 's': { /* string */
+        case 's': /* string */
+        {
             char *str;
+            size_t len;
             int ours;
-            json_t *result;
 
-            str = read_string(s, ap, "string", &ours);
+            str = read_string(s, ap, "string", &len, &ours);
             if(!str)
                 return NULL;
 
-            result = json_string_nocheck(str);
-            if(ours)
-                jsonp_free(str);
-
-            return result;
+            if (ours)
+                return jsonp_stringn_nocheck_own(str, len);
+            else
+                return json_stringn_nocheck(str, len);
         }
 
         case 'n': /* null */
@@ -340,6 +350,7 @@ static int unpack_object(scanner_t *s, json_t *root, va_list *ap)
 {
     int ret = -1;
     int strict = 0;
+    int gotopt = 0;
 
     /* Use a set (emulated by a hashtable) to check that all object
        keys are accessed. Checking that the correct number of keys
@@ -396,7 +407,7 @@ static int unpack_object(scanner_t *s, json_t *root, va_list *ap)
         next_token(s);
 
         if(token(s) == '?') {
-            opt = 1;
+            opt = gotopt = 1;
             next_token(s);
         }
 
@@ -422,10 +433,26 @@ static int unpack_object(scanner_t *s, json_t *root, va_list *ap)
     if(strict == 0 && (s->flags & JSON_STRICT))
         strict = 1;
 
-    if(root && strict == 1 && key_set.size != json_object_size(root)) {
-        long diff = (long)json_object_size(root) - (long)key_set.size;
-        set_error(s, "<validation>", "%li object item(s) left unpacked", diff);
-        goto out;
+    if(root && strict == 1) {
+        /* We need to check that all non optional items have been parsed */
+        const char *key;
+        json_t *value;
+        long unpacked = 0;
+        if (gotopt) {
+            /* We have optional keys, we need to iter on each key */
+            json_object_foreach(root, key, value) {
+                if(!hashtable_get(&key_set, key)) {
+                    unpacked++;
+                }
+            }
+        } else {
+            /* No optional keys, we can just compare the number of items */
+            unpacked = (long)json_object_size(root) - (long)key_set.size;
+        }
+        if (unpacked) {
+            set_error(s, "<validation>", "%li object item(s) left unpacked", unpacked);
+            goto out;
+        }
     }
 
     ret = 0;
@@ -523,16 +550,32 @@ static int unpack(scanner_t *s, json_t *root, va_list *ap)
             }
 
             if(!(s->flags & JSON_VALIDATE_ONLY)) {
-                const char **target;
+                const char **str_target;
+                size_t *len_target = NULL;
 
-                target = va_arg(*ap, const char **);
-                if(!target) {
+                str_target = va_arg(*ap, const char **);
+                if(!str_target) {
                     set_error(s, "<args>", "NULL string argument");
                     return -1;
                 }
 
-                if(root)
-                    *target = json_string_value(root);
+                next_token(s);
+
+                if(token(s) == '%') {
+                    len_target = va_arg(*ap, size_t *);
+                    if(!len_target) {
+                        set_error(s, "<args>", "NULL string length argument");
+                        return -1;
+                    }
+                }
+                else
+                    prev_token(s);
+
+                if(root) {
+                    *str_target = json_string_value(root);
+                    if(len_target)
+                        *len_target = json_string_length(root);
+                }
             }
             return 0;
 

jansson/strbuffer.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  *
  * Jansson is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.

jansson/strbuffer.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  *
  * Jansson is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.

jansson/strconv.c

@@ -2,12 +2,13 @@
 #include <errno.h>
 #include <stdio.h>
 #include <string.h>
+#include <math.h>
 #include "jansson_private.h"
 #include "strbuffer.h"
 
-/* need config.h to get the correct snprintf */
+/* need jansson_private_config.h to get the correct snprintf */
 #ifdef HAVE_CONFIG_H
-#include <config.h>
+#include <jansson_private_config.h>
 #endif
 
 #if JSON_HAVE_LOCALECONV
@@ -69,7 +70,7 @@ int jsonp_strtod(strbuffer_t *strbuffer, double *out)
     value = strtod(strbuffer->value, &end);
     assert(end == strbuffer->value + strbuffer->length);
 
-    if(errno == ERANGE && value != 0) {
+    if((value == HUGE_VAL || value == -HUGE_VAL) && errno == ERANGE) {
         /* Overflow */
         return -1;
     }
@@ -78,13 +79,16 @@ int jsonp_strtod(strbuffer_t *strbuffer, double *out)
     return 0;
 }
 
-int jsonp_dtostr(char *buffer, size_t size, double value)
+int jsonp_dtostr(char *buffer, size_t size, double value, int precision)
 {
     int ret;
     char *start, *end;
     size_t length;
 
-    ret = snprintf(buffer, size, "%.17g", value);
+    if (precision == 0)
+        precision = 17;
+
+    ret = snprintf(buffer, size, "%.*g", precision, value);
     if(ret < 0)
         return -1;
 

jansson/utf.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  *
  * Jansson is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.
@@ -8,7 +8,7 @@
 #include <string.h>
 #include "utf.h"
 
-int utf8_encode(int32_t codepoint, char *buffer, int *size)
+int utf8_encode(int32_t codepoint, char *buffer, size_t *size)
 {
     if(codepoint < 0)
         return -1;
@@ -44,7 +44,7 @@ int utf8_encode(int32_t codepoint, char *buffer, int *size)
     return 0;
 }
 
-int utf8_check_first(char byte)
+size_t utf8_check_first(char byte)
 {
     unsigned char u = (unsigned char)byte;
 
@@ -80,9 +80,9 @@ int utf8_check_first(char byte)
     }
 }
 
-int utf8_check_full(const char *buffer, int size, int32_t *codepoint)
+size_t utf8_check_full(const char *buffer, size_t size, int32_t *codepoint)
 {
-    int i;
+    size_t i;
     int32_t value = 0;
     unsigned char u = (unsigned char)buffer[0];
 
@@ -136,12 +136,12 @@ int utf8_check_full(const char *buffer, int size, int32_t *codepoint)
     return 1;
 }
 
-const char *utf8_iterate(const char *buffer, int32_t *codepoint)
+const char *utf8_iterate(const char *buffer, size_t bufsize, int32_t *codepoint)
 {
-    int count;
+    size_t count;
     int32_t value;
 
-    if(!*buffer)
+    if(!bufsize)
         return buffer;
 
     count = utf8_check_first(buffer[0]);
@@ -152,7 +152,7 @@ const char *utf8_iterate(const char *buffer, int32_t *codepoint)
         value = (unsigned char)buffer[0];
     else
     {
-        if(!utf8_check_full(buffer, count, &value))
+        if(count > bufsize || !utf8_check_full(buffer, count, &value))
             return NULL;
     }
 
@@ -162,21 +162,18 @@ const char *utf8_iterate(const char *buffer, int32_t *codepoint)
     return buffer + count;
 }
 
-int utf8_check_string(const char *string, int length)
+int utf8_check_string(const char *string, size_t length)
 {
-    int i;
-
-    if(length == -1)
-        length = strlen(string);
+    size_t i;
 
     for(i = 0; i < length; i++)
     {
-        int count = utf8_check_first(string[i]);
+        size_t count = utf8_check_first(string[i]);
         if(count == 0)
             return 0;
         else if(count > 1)
         {
-            if(i + count > length)
+            if(count > length - i)
                 return 0;
 
             if(!utf8_check_full(&string[i], count, NULL))

jansson/utf.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  *
  * Jansson is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.
@@ -9,31 +9,19 @@
 #define UTF_H
 
 #ifdef HAVE_CONFIG_H
-#include <config.h>
+#include <jansson_private_config.h>
+#endif
 
-#ifdef HAVE_INTTYPES_H
-/* inttypes.h includes stdint.h in a standard environment, so there's
-no need to include stdint.h separately. If inttypes.h doesn't define
-int32_t, it's defined in config.h. */
-#include <inttypes.h>
-#endif /* HAVE_INTTYPES_H */
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
 
-#else /* !HAVE_CONFIG_H */
-#ifdef _WIN32
-typedef int int32_t;
-#else /* !_WIN32 */
-/* Assume a standard environment */
-#include <inttypes.h>
-#endif /* _WIN32 */
+int utf8_encode(int32_t codepoint, char *buffer, size_t *size);
 
-#endif /* HAVE_CONFIG_H */
+size_t utf8_check_first(char byte);
+size_t utf8_check_full(const char *buffer, size_t size, int32_t *codepoint);
+const char *utf8_iterate(const char *buffer, size_t size, int32_t *codepoint);
 
-int utf8_encode(int codepoint, char *buffer, int *size);
-
-int utf8_check_first(char byte);
-int utf8_check_full(const char *buffer, int size, int32_t *codepoint);
-const char *utf8_iterate(const char *buffer, int32_t *codepoint);
-
-int utf8_check_string(const char *string, int length);
+int utf8_check_string(const char *string, size_t length);
 
 #endif

jansson/value.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009-2013 Petri Lehtinen <petri@digip.org>
+ * Copyright (c) 2009-2014 Petri Lehtinen <petri@digip.org>
  *
  * Jansson is free software; you can redistribute it and/or modify
  * it under the terms of the MIT license. See LICENSE for details.
@@ -9,11 +9,19 @@
 #define _GNU_SOURCE
 #endif
 
+#ifdef HAVE_CONFIG_H
+#include <jansson_private_config.h>
+#endif
+
 #include <stddef.h>
 #include <stdlib.h>
 #include <string.h>
 #include <math.h>
 
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+
 #include "jansson.h"
 #include "hashtable.h"
 #include "jansson_private.h"
@@ -21,8 +29,10 @@
 
 /* Work around nonstandard isnan() and isinf() implementations */
 #ifndef isnan
+#ifndef __sun
 static JSON_INLINE int isnan(double x) { return x != x; }
 #endif
+#endif
 #ifndef isinf
 static JSON_INLINE int isinf(double x) { return !isnan(x) && isnan(x - x); }
 #endif
@@ -36,11 +46,19 @@ static JSON_INLINE void json_init(json_t *json, json_type type)
 
 /*** object ***/
 
+extern volatile uint32_t hashtable_seed;
+
 json_t *json_object(void)
 {
     json_object_t *object = jsonp_malloc(sizeof(json_object_t));
     if(!object)
         return NULL;
+
+    if (!hashtable_seed) {
+        /* Autoseed */
+        json_object_seed(0);
+    }
+
     json_init(&object->json, JSON_OBJECT);
 
     if(hashtable_init(&object->hashtable))
@@ -76,7 +94,7 @@ json_t *json_object_get(const json_t *json, const char *key)
 {
     json_object_t *object;
 
-    if(!json_is_object(json))
+    if(!key || !json_is_object(json))
         return NULL;
 
     object = json_to_object(json);
@@ -108,7 +126,7 @@ int json_object_set_new_nocheck(json_t *json, const char *key, json_t *value)
 
 int json_object_set_new(json_t *json, const char *key, json_t *value)
 {
-    if(!key || !utf8_check_string(key, -1))
+    if(!key || !utf8_check_string(key, strlen(key)))
     {
         json_decref(value);
         return -1;
@@ -121,7 +139,7 @@ int json_object_del(json_t *json, const char *key)
 {
     json_object_t *object;
 
-    if(!json_is_object(json))
+    if(!key || !json_is_object(json))
         return -1;
 
     object = json_to_object(json);
@@ -620,33 +638,68 @@ static json_t *json_array_deep_copy(const json_t *array)
 
 /*** string ***/
 
-json_t *json_string_nocheck(const char *value)
+static json_t *string_create(const char *value, size_t len, int own)
 {
+    char *v;
     json_string_t *string;
 
     if(!value)
         return NULL;
 
-    string = jsonp_malloc(sizeof(json_string_t));
-    if(!string)
-        return NULL;
-    json_init(&string->json, JSON_STRING);
+    if(own)
+        v = (char *)value;
+    else {
+        v = jsonp_strndup(value, len);
+        if(!v)
+            return NULL;
+    }
 
-    string->value = jsonp_strdup(value);
-    if(!string->value) {
-        jsonp_free(string);
+    string = jsonp_malloc(sizeof(json_string_t));
+    if(!string) {
+        if(!own)
+            jsonp_free(v);
         return NULL;
     }
+    json_init(&string->json, JSON_STRING);
+    string->value = v;
+    string->length = len;
 
     return &string->json;
 }
 
-json_t *json_string(const char *value)
+json_t *json_string_nocheck(const char *value)
 {
-    if(!value || !utf8_check_string(value, -1))
+    if(!value)
         return NULL;
 
-    return json_string_nocheck(value);
+    return string_create(value, strlen(value), 0);
+}
+
+json_t *json_stringn_nocheck(const char *value, size_t len)
+{
+    return string_create(value, len, 0);
+}
+
+/* this is private; "steal" is not a public API concept */
+json_t *jsonp_stringn_nocheck_own(const char *value, size_t len)
+{
+    return string_create(value, len, 1);
+}
+
+json_t *json_string(const char *value)
+{
+    if(!value)
+        return NULL;
+
+    return json_stringn(value, strlen(value));
+}
+
+json_t *json_stringn(const char *value, size_t len)
+{
+    if(!value || !utf8_check_string(value, len))
+        return NULL;
+
+    return json_stringn_nocheck(value, len);
 }
 
 const char *json_string_value(const json_t *json)
@@ -657,7 +710,23 @@ const char *json_string_value(const json_t *json)
     return json_to_string(json)->value;
 }
 
+size_t json_string_length(const json_t *json)
+{
+    if(!json_is_string(json))
+        return 0;
+
+    return json_to_string(json)->length;
+}
+
 int json_string_set_nocheck(json_t *json, const char *value)
+{
+    if(!value)
+        return -1;
+
+    return json_string_setn_nocheck(json, value, strlen(value));
+}
+
+int json_string_setn_nocheck(json_t *json, const char *value, size_t len)
 {
     char *dup;
     json_string_t *string;
@@ -665,23 +734,32 @@ int json_string_set_nocheck(json_t *json, const char *value)
     if(!json_is_string(json) || !value)
         return -1;
 
-    dup = jsonp_strdup(value);
+    dup = jsonp_strndup(value, len);
     if(!dup)
         return -1;
 
     string = json_to_string(json);
     jsonp_free(string->value);
     string->value = dup;
+    string->length = len;
 
     return 0;
 }
 
 int json_string_set(json_t *json, const char *value)
 {
-    if(!value || !utf8_check_string(value, -1))
+    if(!value)
         return -1;
 
-    return json_string_set_nocheck(json, value);
+    return json_string_setn(json, value, strlen(value));
+}
+
+int json_string_setn(json_t *json, const char *value, size_t len)
+{
+    if(!value || !utf8_check_string(value, len))
+        return -1;
+
+    return json_string_setn_nocheck(json, value, len);
 }
 
 static void json_delete_string(json_string_t *string)
@@ -692,12 +770,25 @@ static void json_delete_string(json_string_t *string)
 
 static int json_string_equal(json_t *string1, json_t *string2)
 {
-    return strcmp(json_string_value(string1), json_string_value(string2)) == 0;
+    json_string_t *s1, *s2;
+
+    if(!json_is_string(string1) || !json_is_string(string2))
+        return 0;
+
+    s1 = json_to_string(string1);
+    s2 = json_to_string(string2);
+    return s1->length == s2->length && !memcmp(s1->value, s2->value, s1->length);
 }
 
 static json_t *json_string_copy(const json_t *string)
 {
-    return json_string_nocheck(json_string_value(string));
+    json_string_t *s;
+
+    if(!json_is_string(string))
+        return NULL;
+
+    s = json_to_string(string);
+    return json_stringn_nocheck(s->value, s->length);
 }
 
 

projects/MSVC_2005/Fred2.vcproj

@@ -83,7 +83,7 @@
 				Name="VCLinkerTool"
 				AdditionalOptions="/FORCE:MULTIPLE"
 				AdditionalDependencies="kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fred2_open_3_7_2-DEBUG.exe"
+				OutputFile="$(OutDir)\fred2_open_3_7_1-DEBUG.exe"
 				LinkIncremental="2"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories=""$(ConfigurationName)";../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -197,7 +197,7 @@
 				Name="VCLinkerTool"
 				AdditionalOptions="/FORCE:MULTIPLE"
 				AdditionalDependencies="wsock32.lib winmm.lib msacm32.lib vfw32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fred2_open_3_7_2.exe"
+				OutputFile="$(OutDir)\fred2_open_3_7_1.exe"
 				LinkIncremental="1"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories=""$(ConfigurationName)";../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"

projects/MSVC_2005/Freespace2.vcproj

@@ -84,7 +84,7 @@
 				LinkLibraryDependencies="true"
 				UseLibraryDependencyInputs="false"
 				AdditionalDependencies="odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fs2_open_3_7_2-DEBUG.exe"
+				OutputFile="$(OutDir)\fs2_open_3_7_1-DEBUG.exe"
 				LinkIncremental="2"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories=""$(ConfigurationName)";../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -199,7 +199,7 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalDependencies="odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fs2_open_3_7_2.exe"
+				OutputFile="$(OutDir)\fs2_open_3_7_1.exe"
 				LinkIncremental="1"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories="&quot;$(ConfigurationName)&quot;;../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"

projects/MSVC_2005/wxFRED2.vcproj

@@ -29,8 +29,8 @@
 			<Tool
 				Name="VCCustomBuildTool"
 				Description="Copying build..."
-				CommandLine="copy &quot;$(TargetPath)&quot; &quot;$(FS2PATH)/wxfred2_open_3_7_2-debug.exe&quot;&#x0D;&#x0A;copy &quot;$(ProjectDir)..\..\code\wxfred2\wxfred.xrc&quot; &quot;$(FS2PATH)\wxfred.xrc&quot;&#x0D;&#x0A;"
-				Outputs="$(FS2PATH)/wxfred2_open_3_7_2-debug.exe;$(FS2PATH)\wxfred.xrc"
+				CommandLine="copy &quot;$(TargetPath)&quot; &quot;$(FS2PATH)/wxfred2_open_3_7_1-debug.exe&quot;&#x0D;&#x0A;copy &quot;$(ProjectDir)..\..\code\wxfred2\wxfred.xrc&quot; &quot;$(FS2PATH)\wxfred.xrc&quot;&#x0D;&#x0A;"
+				Outputs="$(FS2PATH)/wxfred2_open_3_7_1-debug.exe;$(FS2PATH)\wxfred.xrc"
 			/>
 			<Tool
 				Name="VCXMLDataGeneratorTool"
@@ -80,15 +80,15 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalDependencies="odbc32.lib odbccp32.lib comctl32.lib rpcrt4.lib wsock32.lib winmm.lib wxmsw28d_xrc.lib wxmsw28d_html.lib wxmsw28d_adv.lib wxmsw28d_core.lib wxbase28d_xml.lib wxbase28d.lib wxtiffd.lib wxjpegd.lib wxpngd.lib wxzlibd.lib wxregexd.lib wxexpatd.lib"
-				OutputFile="Debug/wxfred2_open_3_7_2-debug.exe"
+				OutputFile="Debug/wxfred2_open_3_7_1-debug.exe"
 				LinkIncremental="2"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories="$(WXWIN)/lib,$(WXWIN)/lib/vc_lib"
 				IgnoreDefaultLibraryNames="libcd.lib,libcid.lib"
 				GenerateDebugInformation="true"
-				ProgramDatabaseFile=".\Debug/wxfred2_open_3_7_2-debug.pdb"
+				ProgramDatabaseFile=".\Debug/wxfred2_open_3_7_1-debug.pdb"
 				GenerateMapFile="true"
-				MapFileName=".\Debug\Profile\wxfred2/wxfred2_open_3_7_2-debug.map"
+				MapFileName=".\Debug\Profile\wxfred2/wxfred2_open_3_7_1-debug.map"
 				SubSystem="2"
 				TargetMachine="1"
 			/>
@@ -134,8 +134,8 @@
 			<Tool
 				Name="VCCustomBuildTool"
 				Description="Copying build..."
-				CommandLine="copy &quot;$(TargetPath)&quot; &quot;$(FS2PATH)\wxfred2_open_3_7_2.exe&quot;&#x0D;&#x0A;copy &quot;$(ProjectDir)..\..\code\wxfred2\wxfred.xrc&quot; &quot;$(FS2PATH)\wxfred.xrc&quot;&#x0D;&#x0A;"
-				Outputs="$(FS2PATH)\wxfred2_open_3_7_2.exe;$(FS2PATH)\wxfred.xrc"
+				CommandLine="copy &quot;$(TargetPath)&quot; &quot;$(FS2PATH)\wxfred2_open_3_7_1.exe&quot;&#x0D;&#x0A;copy &quot;$(ProjectDir)..\..\code\wxfred2\wxfred.xrc&quot; &quot;$(FS2PATH)\wxfred.xrc&quot;&#x0D;&#x0A;"
+				Outputs="$(FS2PATH)\wxfred2_open_3_7_1.exe;$(FS2PATH)\wxfred.xrc"
 			/>
 			<Tool
 				Name="VCXMLDataGeneratorTool"
@@ -185,15 +185,15 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalDependencies="odbc32.lib odbccp32.lib comctl32.lib rpcrt4.lib wsock32.lib winmm.lib wxmsw28_xrc.lib wxmsw28_html.lib wxmsw28_adv.lib wxmsw28_core.lib wxbase28_xml.lib wxbase28.lib wxtiff.lib wxjpeg.lib wxpng.lib wxzlib.lib wxregex.lib wxexpat.lib"
-				OutputFile="Release/wxfred2_open_3_7_2.exe"
+				OutputFile="Release/wxfred2_open_3_7_1.exe"
 				LinkIncremental="1"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories="$(WXWIN)/lib,$(WXWIN)/lib/vc_lib"
 				IgnoreDefaultLibraryNames="libc.lib,libci.lib"
 				GenerateDebugInformation="false"
-				ProgramDatabaseFile=".\Release/wxfred2_open_3_7_2.pdb"
+				ProgramDatabaseFile=".\Release/wxfred2_open_3_7_1.pdb"
 				GenerateMapFile="false"
-				MapFileName=".\Release\Profile\wxfred2/wxfred2_open_3_7_2.map"
+				MapFileName=".\Release\Profile\wxfred2/wxfred2_open_3_7_1.map"
 				SubSystem="2"
 				TargetMachine="1"
 			/>

projects/MSVC_2008/Fred2.vcproj

@@ -53,7 +53,7 @@
 				Name="VCCLCompilerTool"
 				Optimization="0"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="_DEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="_DEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="1"
@@ -84,7 +84,7 @@
 				Name="VCLinkerTool"
 				AdditionalOptions="/FORCE:MULTIPLE"
 				AdditionalDependencies="kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fred2_open_3_7_2_NO-SSE-DEBUG.exe"
+				OutputFile="$(OutDir)\fred2_open_3_7_1_NO-SSE-DEBUG.exe"
 				LinkIncremental="2"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories=""$(ConfigurationName)";../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -160,7 +160,7 @@
 				Name="VCCLCompilerTool"
 				Optimization="0"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="_DEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="_DEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="1"
@@ -193,7 +193,7 @@
 				Name="VCLinkerTool"
 				AdditionalOptions="/FORCE:MULTIPLE"
 				AdditionalDependencies="kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fred2_open_3_7_2_SSE-DEBUG.exe"
+				OutputFile="$(OutDir)\fred2_open_3_7_1_SSE-DEBUG.exe"
 				LinkIncremental="2"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories=""$(ConfigurationName)";../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -269,7 +269,7 @@
 				Name="VCCLCompilerTool"
 				Optimization="0"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="_DEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="_DEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="1"
@@ -302,7 +302,7 @@
 				Name="VCLinkerTool"
 				AdditionalOptions="/FORCE:MULTIPLE"
 				AdditionalDependencies="kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fred2_open_3_7_2-DEBUG.exe"
+				OutputFile="$(OutDir)\fred2_open_3_7_1-DEBUG.exe"
 				LinkIncremental="2"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories=""$(ConfigurationName)";../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -385,7 +385,7 @@
 				OmitFramePointers="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				BufferSecurityCheck="false"
@@ -416,7 +416,7 @@
 				Name="VCLinkerTool"
 				AdditionalOptions="/FORCE:MULTIPLE"
 				AdditionalDependencies="wsock32.lib winmm.lib msacm32.lib vfw32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fred2_open_3_7_2_NO-SSE.exe"
+				OutputFile="$(OutDir)\fred2_open_3_7_1_NO-SSE.exe"
 				LinkIncremental="1"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories=""$(ConfigurationName)";../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -499,7 +499,7 @@
 				OmitFramePointers="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				BufferSecurityCheck="false"
@@ -531,7 +531,7 @@
 				Name="VCLinkerTool"
 				AdditionalOptions="/FORCE:MULTIPLE"
 				AdditionalDependencies="wsock32.lib winmm.lib msacm32.lib vfw32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fred2_open_3_7_2_SSE.exe"
+				OutputFile="$(OutDir)\fred2_open_3_7_1_SSE.exe"
 				LinkIncremental="1"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories=""$(ConfigurationName)";../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -614,7 +614,7 @@
 				OmitFramePointers="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;FRED;WINVER=0x410;_WIN32_WINNT=0x500;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				BufferSecurityCheck="false"
@@ -646,7 +646,7 @@
 				Name="VCLinkerTool"
 				AdditionalOptions="/FORCE:MULTIPLE"
 				AdditionalDependencies="wsock32.lib winmm.lib msacm32.lib vfw32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fred2_open_3_7_2.exe"
+				OutputFile="$(OutDir)\fred2_open_3_7_1.exe"
 				LinkIncremental="1"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories=""$(ConfigurationName)";../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"

projects/MSVC_2008/Freespace2.vcproj

@@ -52,7 +52,7 @@
 				Name="VCCLCompilerTool"
 				Optimization="0"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="1"
@@ -75,7 +75,7 @@
 			/>
 			<Tool
 				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="_DEBUG;_VC08;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;"
+				PreprocessorDefinitions="_DEBUG;_VC08;"
 				Culture="1033"
 			/>
 			<Tool
@@ -87,7 +87,7 @@
 				UseLibraryDependencyInputs="false"
 				AdditionalDependencies="odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib ole32.lib advapi32.lib gdi32.lib user32.lib"
 				ShowProgress="0"
-				OutputFile="$(OutDir)\fs2_open_3_7_2_NO-SSE-DEBUG.exe"
+				OutputFile="$(OutDir)\fs2_open_3_7_1_NO-SSE-DEBUG.exe"
 				LinkIncremental="2"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories="&quot;$(ConfigurationName)&quot;;../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -164,7 +164,7 @@
 				Name="VCCLCompilerTool"
 				Optimization="0"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="1"
@@ -188,7 +188,7 @@
 			/>
 			<Tool
 				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="_DEBUG;_VC08;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;"
+				PreprocessorDefinitions="_DEBUG;_VC08;"
 				Culture="1033"
 			/>
 			<Tool
@@ -200,7 +200,7 @@
 				UseLibraryDependencyInputs="false"
 				AdditionalDependencies="odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib ole32.lib advapi32.lib gdi32.lib user32.lib"
 				ShowProgress="0"
-				OutputFile="$(OutDir)\fs2_open_3_7_2_SSE-DEBUG.exe"
+				OutputFile="$(OutDir)\fs2_open_3_7_1_SSE-DEBUG.exe"
 				LinkIncremental="2"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories="&quot;$(ConfigurationName)&quot;;../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -277,7 +277,7 @@
 				Name="VCCLCompilerTool"
 				Optimization="0"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="1"
@@ -301,7 +301,7 @@
 			/>
 			<Tool
 				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="_DEBUG;_VC08;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;_SSE2;"
+				PreprocessorDefinitions="_DEBUG;_VC08;_SSE2;"
 				Culture="1033"
 			/>
 			<Tool
@@ -313,7 +313,7 @@
 				UseLibraryDependencyInputs="false"
 				AdditionalDependencies="odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib ole32.lib advapi32.lib gdi32.lib user32.lib"
 				ShowProgress="0"
-				OutputFile="$(OutDir)\fs2_open_3_7_2-DEBUG.exe"
+				OutputFile="$(OutDir)\fs2_open_3_7_1-DEBUG.exe"
 				LinkIncremental="2"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories="&quot;$(ConfigurationName)&quot;;../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -397,7 +397,7 @@
 				OmitFramePointers="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				BufferSecurityCheck="false"
@@ -419,7 +419,7 @@
 			/>
 			<Tool
 				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="NDEBUG;_VC08;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;"
+				PreprocessorDefinitions="NDEBUG;_VC08;"
 				Culture="1033"
 			/>
 			<Tool
@@ -428,7 +428,7 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalDependencies="odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fs2_open_3_7_2_NO-SSE.exe"
+				OutputFile="$(OutDir)\fs2_open_3_7_1_NO-SSE.exe"
 				LinkIncremental="1"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories="&quot;$(ConfigurationName)&quot;;../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -514,7 +514,7 @@
 				OmitFramePointers="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				BufferSecurityCheck="false"
@@ -537,7 +537,7 @@
 			/>
 			<Tool
 				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="NDEBUG;_VC08;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;"
+				PreprocessorDefinitions="NDEBUG;_VC08;"
 				Culture="1033"
 			/>
 			<Tool
@@ -546,7 +546,7 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalDependencies="odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fs2_open_3_7_2_SSE.exe"
+				OutputFile="$(OutDir)\fs2_open_3_7_1_SSE.exe"
 				LinkIncremental="1"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories="&quot;$(ConfigurationName)&quot;;../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"
@@ -632,7 +632,7 @@
 				OmitFramePointers="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				StringPooling="true"
 				RuntimeLibrary="0"
 				BufferSecurityCheck="false"
@@ -655,7 +655,7 @@
 			/>
 			<Tool
 				Name="VCResourceCompilerTool"
-				PreprocessorDefinitions="NDEBUG;_VC08;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;FS2_VOICER;_SSE2;"
+				PreprocessorDefinitions="NDEBUG;_VC08;_SSE2;"
 				Culture="1033"
 			/>
 			<Tool
@@ -664,7 +664,7 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalDependencies="odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib"
-				OutputFile="$(OutDir)\fs2_open_3_7_2.exe"
+				OutputFile="$(OutDir)\fs2_open_3_7_1.exe"
 				LinkIncremental="1"
 				SuppressStartupBanner="true"
 				AdditionalLibraryDirectories="&quot;$(ConfigurationName)&quot;;../../oggvorbis/lib;../../openal/libs/win32;../../openal/libs/win64;"

projects/MSVC_2008/code.vcproj

@@ -42,7 +42,7 @@
 				Name="VCCLCompilerTool"
 				Optimization="0"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="1"
@@ -123,7 +123,7 @@
 				Name="VCCLCompilerTool"
 				Optimization="0"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="1"
@@ -206,7 +206,7 @@
 				Name="VCCLCompilerTool"
 				Optimization="0"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="_WINDOWS;WIN32;_DEBUG;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				MinimalRebuild="true"
 				BasicRuntimeChecks="3"
 				RuntimeLibrary="1"
@@ -296,7 +296,7 @@
 				OmitFramePointers="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				StringPooling="true"
 				ExceptionHandling="1"
 				RuntimeLibrary="0"
@@ -382,7 +382,7 @@
 				OmitFramePointers="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				StringPooling="true"
 				ExceptionHandling="1"
 				RuntimeLibrary="0"
@@ -469,7 +469,7 @@
 				OmitFramePointers="true"
 				WholeProgramOptimization="true"
 				AdditionalIncludeDirectories="../../code;../../libjpeg;../../libpng;../../lua;../../oggvorbis/include;../../openal/include;../../zlib;"
-				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;FS2_SPEECH;FS2_VOICER;"
+				PreprocessorDefinitions="NDEBUG;WIN32;_WINDOWS;PDB_DEBUGGING;_CRT_SECURE_NO_DEPRECATE;_SECURE_SCL=0;_HAS_ITERATOR_DEBUGGING=0;"
 				StringPooling="true"
 				ExceptionHandling="1"
 				RuntimeLibrary="0"

projects/MSVC_2010/Fred2.vcxproj

@@ -125,12 +125,12 @@
     <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
     <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
     <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fred2_open_3_7_2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fred2_open_3_7_2_SSE-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fred2_open_3_7_2_SSE2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fred2_open_3_7_2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fred2_open_3_7_2_SSE</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fred2_open_3_7_2_SSE2</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fred2_open_3_7_1-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fred2_open_3_7_1_SSE-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fred2_open_3_7_1_SSE2-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fred2_open_3_7_1</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fred2_open_3_7_1_SSE</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fred2_open_3_7_1_SSE2</TargetName>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <CustomBuildStep>

projects/MSVC_2010/Freespace2.vcxproj

@@ -124,12 +124,12 @@
     <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
     <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
     <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fs2_open_3_7_2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fs2_open_3_7_2_SSE-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fs2_open_3_7_2_SSE2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fs2_open_3_7_2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fs2_open_3_7_2_SSE</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fs2_open_3_7_2_SSE2</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fs2_open_3_7_1-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fs2_open_3_7_1_SSE-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fs2_open_3_7_1_SSE2-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fs2_open_3_7_1</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fs2_open_3_7_1_SSE</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fs2_open_3_7_1_SSE2</TargetName>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <CustomBuildStep>

projects/MSVC_2010/wxFRED2.vcxproj

@@ -100,7 +100,7 @@
       <AdditionalDependencies>comctl32.lib;rpcrt4.lib;winmm.lib;advapi32.lib;wsock32.lib;wxmsw29ud_core.lib;wxbase29ud.lib</AdditionalDependencies>
     </Link>
     <CustomBuildStep>
-      <Command>copy /y "$(TargetPath)" "$(FS2PATH)\wxfred2_open_3_7_2-debug.exe"  </Command>
+      <Command>copy /y "$(TargetPath)" "$(FS2PATH)\wxfred2_open_3_7_1-debug.exe"  </Command>
       <Message>Copying build...</Message>
       <Outputs>$(FS2PATH)\wxfred2_open$(FS_VERSION_FULL)-debug.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
     </CustomBuildStep>
@@ -159,9 +159,9 @@
       <AdditionalDependencies>comctl32.lib;rpcrt4.lib;winmm.lib;advapi32.lib;wsock32.lib;wxmsw29u_core.lib;wxbase29u.lib</AdditionalDependencies>
     </Link>
     <CustomBuildStep>
-      <Command>copy /y "$(TargetPath)" "$(FS2PATH)/wxfred2_open_3_7_2.exe"</Command>
+      <Command>copy /y "$(TargetPath)" "$(FS2PATH)/wxfred2_open_3_7_1.exe"</Command>
       <Message>Copying build...</Message>
-      <Outputs>$(FS2PATH)\wxfred2_open_3_7_2.exe;%(Outputs)</Outputs>
+      <Outputs>$(FS2PATH)\wxfred2_open_3_7_1.exe;%(Outputs)</Outputs>
     </CustomBuildStep>
   </ItemDefinitionGroup>
   <ItemGroup>

projects/MSVC_2011/Fred2.vcxproj

@@ -171,14 +171,14 @@
     <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
     <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
     <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fred2_open_3_7_2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fred2_open_3_7_2_SSE-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fred2_open_3_7_2_SSE2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fred2_open_3_7_2_AVX-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fred2_open_3_7_2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fred2_open_3_7_2_SSE2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fred2_open_3_7_2_SSE2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fred2_open_3_7_2_AVX</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fred2_open_3_7_1-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fred2_open_3_7_1_SSE-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fred2_open_3_7_1_SSE2-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fred2_open_3_7_1_AVX-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fred2_open_3_7_1</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fred2_open_3_7_1_SSE2</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fred2_open_3_7_1_SSE2</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fred2_open_3_7_1_AVX</TargetName>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <CustomBuildStep>

projects/MSVC_2011/Freespace2.vcxproj

@@ -170,14 +170,14 @@
     <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
     <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
     <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fs2_open_3_7_2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fs2_open_3_7_2_SSE-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fs2_open_3_7_2_SSE2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fs2_open_3_7_2_AVX-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fs2_open_3_7_2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fs2_open_3_7_2_SSE</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fs2_open_3_7_2_SSE2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fs2_open_3_7_2_AVX</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fs2_open_3_7_1-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fs2_open_3_7_1_SSE-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fs2_open_3_7_1_SSE2-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fs2_open_3_7_1_AVX-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fs2_open_3_7_1</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fs2_open_3_7_1_SSE</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fs2_open_3_7_1_SSE2</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fs2_open_3_7_1_AVX</TargetName>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <CustomBuildStep>

projects/MSVC_2011/wxFRED2.vcxproj

@@ -95,10 +95,10 @@
       <AdditionalDependencies>odbc32.lib;odbccp32.lib;comctl32.lib;rpcrt4.lib;wsock32.lib;winmm.lib;wxmsw28d_xrc.lib;wxmsw28d_html.lib;wxmsw28d_adv.lib;wxmsw28d_core.lib;wxbase28d_xml.lib;wxbase28d.lib;wxtiffd.lib;wxjpegd.lib;wxpngd.lib;wxzlibd.lib;wxregexd.lib;wxexpatd.lib;%(AdditionalDependencies)</AdditionalDependencies>
     </Link>
     <CustomBuildStep>
-      <Command>copy %(FullPath) "$(FS2PATH)/wxfred2_open_3_7_2-debug.exe"  
+      <Command>copy %(FullPath) "$(FS2PATH)/wxfred2_open_3_7_1-debug.exe"  
 copy "$(ProjectDir)..\..\code\wxfred2\wxfred.xrc" "$(FS2PATH)\wxfred.xrc"</Command>
       <Message>Copying build...</Message>
-      <Outputs>$(FS2PATH)/wxfred2_open_3_7_2-debug.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
+      <Outputs>$(FS2PATH)/wxfred2_open_3_7_1-debug.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
     </CustomBuildStep>
   </ItemDefinitionGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
@@ -146,10 +146,10 @@ copy "$(ProjectDir)..\..\code\wxfred2\wxfred.xrc" "$(FS2PATH)\wxfred.xrc"</Comma
       <AdditionalDependencies>odbc32.lib;odbccp32.lib;comctl32.lib;rpcrt4.lib;wsock32.lib;winmm.lib;wxmsw28_xrc.lib;wxmsw28_html.lib;wxmsw28_adv.lib;wxmsw28_core.lib;wxbase28_xml.lib;wxbase28.lib;wxtiff.lib;wxjpeg.lib;wxpng.lib;wxzlib.lib;wxregex.lib;wxexpat.lib;%(AdditionalDependencies)</AdditionalDependencies>
     </Link>
     <CustomBuildStep>
-      <Command>copy %(FullPath) "$(FS2PATH)\wxfred2_open_3_7_2.exe"  
+      <Command>copy %(FullPath) "$(FS2PATH)\wxfred2_open_3_7_1.exe"  
 copy "$(ProjectDir)..\..\code\wxfred2\wxfred.xrc" "$(FS2PATH)\wxfred.xrc"</Command>
       <Message>Copying build...</Message>
-      <Outputs>$(FS2PATH)\wxfred2_open_3_7_2.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
+      <Outputs>$(FS2PATH)\wxfred2_open_3_7_1.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
     </CustomBuildStep>
   </ItemDefinitionGroup>
   <ItemGroup>

projects/MSVC_2013/Fred2.vcxproj

@@ -170,14 +170,14 @@
     <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
     <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
     <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fred2_open_3_7_2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fred2_open_3_7_2_SSE-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fred2_open_3_7_2_SSE2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fred2_open_3_7_2_AVX-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fred2_open_3_7_2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fred2_open_3_7_2_SSE2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fred2_open_3_7_2_SSE2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fred2_open_3_7_2_AVX</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fred2_open_3_7_1-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fred2_open_3_7_1_SSE-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fred2_open_3_7_1_SSE2-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fred2_open_3_7_1_AVX-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fred2_open_3_7_1</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fred2_open_3_7_1_SSE2</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fred2_open_3_7_1_SSE2</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fred2_open_3_7_1_AVX</TargetName>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <CustomBuildStep>

projects/MSVC_2013/Freespace2.vcxproj

@@ -169,14 +169,14 @@
     <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
     <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
     <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fs2_open_3_7_2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fs2_open_3_7_2_SSE-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fs2_open_3_7_2_SSE2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fs2_open_3_7_2_AVX-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fs2_open_3_7_2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fs2_open_3_7_2_SSE</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fs2_open_3_7_2_SSE2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fs2_open_3_7_2_AVX</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fs2_open_3_7_1-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fs2_open_3_7_1_SSE-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fs2_open_3_7_1_SSE2-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fs2_open_3_7_1_AVX-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fs2_open_3_7_1</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fs2_open_3_7_1_SSE</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fs2_open_3_7_1_SSE2</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fs2_open_3_7_1_AVX</TargetName>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <CustomBuildStep>

projects/MSVC_2013/wxFRED2.vcxproj

@@ -95,10 +95,10 @@
       <AdditionalDependencies>odbc32.lib;odbccp32.lib;comctl32.lib;rpcrt4.lib;wsock32.lib;winmm.lib;wxmsw28d_xrc.lib;wxmsw28d_html.lib;wxmsw28d_adv.lib;wxmsw28d_core.lib;wxbase28d_xml.lib;wxbase28d.lib;wxtiffd.lib;wxjpegd.lib;wxpngd.lib;wxzlibd.lib;wxregexd.lib;wxexpatd.lib;%(AdditionalDependencies)</AdditionalDependencies>
     </Link>
     <CustomBuildStep>
-      <Command>copy %(FullPath) "$(FS2PATH)/wxfred2_open_3_7_2-debug.exe"  
+      <Command>copy %(FullPath) "$(FS2PATH)/wxfred2_open_3_7_1-debug.exe"  
 copy "$(ProjectDir)..\..\code\wxfred2\wxfred.xrc" "$(FS2PATH)\wxfred.xrc"</Command>
       <Message>Copying build...</Message>
-      <Outputs>$(FS2PATH)/wxfred2_open_3_7_2-debug.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
+      <Outputs>$(FS2PATH)/wxfred2_open_3_7_1-debug.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
     </CustomBuildStep>
   </ItemDefinitionGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
@@ -146,10 +146,10 @@ copy "$(ProjectDir)..\..\code\wxfred2\wxfred.xrc" "$(FS2PATH)\wxfred.xrc"</Comma
       <AdditionalDependencies>odbc32.lib;odbccp32.lib;comctl32.lib;rpcrt4.lib;wsock32.lib;winmm.lib;wxmsw28_xrc.lib;wxmsw28_html.lib;wxmsw28_adv.lib;wxmsw28_core.lib;wxbase28_xml.lib;wxbase28.lib;wxtiff.lib;wxjpeg.lib;wxpng.lib;wxzlib.lib;wxregex.lib;wxexpat.lib;%(AdditionalDependencies)</AdditionalDependencies>
     </Link>
     <CustomBuildStep>
-      <Command>copy %(FullPath) "$(FS2PATH)\wxfred2_open_3_7_2.exe"  
+      <Command>copy %(FullPath) "$(FS2PATH)\wxfred2_open_3_7_1.exe"  
 copy "$(ProjectDir)..\..\code\wxfred2\wxfred.xrc" "$(FS2PATH)\wxfred.xrc"</Command>
       <Message>Copying build...</Message>
-      <Outputs>$(FS2PATH)\wxfred2_open_3_7_2.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
+      <Outputs>$(FS2PATH)\wxfred2_open_3_7_1.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
     </CustomBuildStep>
   </ItemDefinitionGroup>
   <ItemGroup>

projects/MSVC_2015/Fred2.vcxproj

@@ -170,14 +170,14 @@
     <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
     <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
     <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fred2_open_3_7_2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fred2_open_3_7_2_SSE-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fred2_open_3_7_2_SSE2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fred2_open_3_7_2_AVX-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fred2_open_3_7_2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fred2_open_3_7_2_SSE2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fred2_open_3_7_2_SSE2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fred2_open_3_7_2_AVX</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fred2_open_3_7_1-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fred2_open_3_7_1_SSE-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fred2_open_3_7_1_SSE2-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fred2_open_3_7_1_AVX-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fred2_open_3_7_1</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fred2_open_3_7_1_SSE2</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fred2_open_3_7_1_SSE2</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fred2_open_3_7_1_AVX</TargetName>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <CustomBuildStep>

projects/MSVC_2015/Freespace2.vcxproj

@@ -169,14 +169,14 @@
     <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
     <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
     <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fs2_open_3_7_2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fs2_open_3_7_2_SSE-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fs2_open_3_7_2_SSE2-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fs2_open_3_7_2_AVX-DEBUG</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fs2_open_3_7_2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fs2_open_3_7_2_SSE</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fs2_open_3_7_2_SSE2</TargetName>
-    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fs2_open_3_7_2_AVX</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">fs2_open_3_7_1-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE|Win32'">fs2_open_3_7_1_SSE-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug SSE2|Win32'">fs2_open_3_7_1_SSE2-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug AVX|Win32'">fs2_open_3_7_1_AVX-DEBUG</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">fs2_open_3_7_1</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE|Win32'">fs2_open_3_7_1_SSE</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release SSE2|Win32'">fs2_open_3_7_1_SSE2</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release AVX|Win32'">fs2_open_3_7_1_AVX</TargetName>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <CustomBuildStep>

projects/MSVC_2015/wxFRED2.vcxproj

@@ -95,10 +95,10 @@
       <AdditionalDependencies>odbc32.lib;odbccp32.lib;comctl32.lib;rpcrt4.lib;wsock32.lib;winmm.lib;wxmsw28d_xrc.lib;wxmsw28d_html.lib;wxmsw28d_adv.lib;wxmsw28d_core.lib;wxbase28d_xml.lib;wxbase28d.lib;wxtiffd.lib;wxjpegd.lib;wxpngd.lib;wxzlibd.lib;wxregexd.lib;wxexpatd.lib;%(AdditionalDependencies)</AdditionalDependencies>
     </Link>
     <CustomBuildStep>
-      <Command>copy %(FullPath) "$(FS2PATH)/wxfred2_open_3_7_2-debug.exe"  
+      <Command>copy %(FullPath) "$(FS2PATH)/wxfred2_open_3_7_1-debug.exe"  
 copy "$(ProjectDir)..\..\code\wxfred2\wxfred.xrc" "$(FS2PATH)\wxfred.xrc"</Command>
       <Message>Copying build...</Message>
-      <Outputs>$(FS2PATH)/wxfred2_open_3_7_2-debug.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
+      <Outputs>$(FS2PATH)/wxfred2_open_3_7_1-debug.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
     </CustomBuildStep>
   </ItemDefinitionGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
@@ -146,10 +146,10 @@ copy "$(ProjectDir)..\..\code\wxfred2\wxfred.xrc" "$(FS2PATH)\wxfred.xrc"</Comma
       <AdditionalDependencies>odbc32.lib;odbccp32.lib;comctl32.lib;rpcrt4.lib;wsock32.lib;winmm.lib;wxmsw28_xrc.lib;wxmsw28_html.lib;wxmsw28_adv.lib;wxmsw28_core.lib;wxbase28_xml.lib;wxbase28.lib;wxtiff.lib;wxjpeg.lib;wxpng.lib;wxzlib.lib;wxregex.lib;wxexpat.lib;%(AdditionalDependencies)</AdditionalDependencies>
     </Link>
     <CustomBuildStep>
-      <Command>copy %(FullPath) "$(FS2PATH)\wxfred2_open_3_7_2.exe"  
+      <Command>copy %(FullPath) "$(FS2PATH)\wxfred2_open_3_7_1.exe"  
 copy "$(ProjectDir)..\..\code\wxfred2\wxfred.xrc" "$(FS2PATH)\wxfred.xrc"</Command>
       <Message>Copying build...</Message>
-      <Outputs>$(FS2PATH)\wxfred2_open_3_7_2.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
+      <Outputs>$(FS2PATH)\wxfred2_open_3_7_1.exe;$(FS2PATH)\wxfred.xrc;%(Outputs)</Outputs>
     </CustomBuildStep>
   </ItemDefinitionGroup>
   <ItemGroup>

projects/MSVC_6/Fred2.dsp

@@ -54,14 +54,14 @@ BSC32=bscmake.exe
 # ADD BSC32 /nologo
 LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /machine:I386
-# ADD LINK32 wsock32.lib winmm.lib msacm32.lib vfw32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib /nologo /subsystem:windows /pdb:none /machine:I386 /nodefaultlib:"libc.lib" /nodefaultlib:"libcd.lib" /out:"Release/fred2_open_3_7_2.exe" /libpath:"Release" /libpath:"../../STLport-5.2.1/lib" /libpath:"../../oggvorbis/lib" /libpath:"../../openal/libs/win32" /libpath:"../../openal/libs/win64" /MAPINFO:EXPORTS /MAPINFO:LINES /FORCE:MULTIPLE
+# ADD LINK32 wsock32.lib winmm.lib msacm32.lib vfw32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib /nologo /subsystem:windows /pdb:none /machine:I386 /nodefaultlib:"libc.lib" /nodefaultlib:"libcd.lib" /out:"Release/fred2_open_3_7_1.exe" /libpath:"Release" /libpath:"../../STLport-5.2.1/lib" /libpath:"../../oggvorbis/lib" /libpath:"../../openal/libs/win32" /libpath:"../../openal/libs/win64" /MAPINFO:EXPORTS /MAPINFO:LINES /FORCE:MULTIPLE
 # SUBTRACT LINK32 /map
 # Begin Custom Build - Copying build...
-InputPath=.\Release\fred2_open_3_7_2.exe
+InputPath=.\Release\fred2_open_3_7_1.exe
 SOURCE="$(InputPath)"
 
-"$(FS2PATH)/fred2_open_3_7_2.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	copy /y $(InputPath) "$(FS2PATH)/fred2_open_3_7_2.exe"
+"$(FS2PATH)/fred2_open_3_7_1.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	copy /y $(InputPath) "$(FS2PATH)/fred2_open_3_7_1.exe"
 
 # End Custom Build
 
@@ -89,14 +89,14 @@ BSC32=bscmake.exe
 # ADD BSC32 /nologo
 LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 Quartz.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib /nologo /subsystem:windows /map /debug /machine:I386 /nodefaultlib:"libc.lib" /nodefaultlib:"libcd.lib" /nodefaultlib:"libcmt.lib" /out:"Debug/fred2_open_3_7_2-debug.exe" /pdbtype:sept /libpath:"Debug" /libpath:"../../STLport-5.2.1/lib" /libpath:"../../oggvorbis/lib" /libpath:"../../openal/libs/win32" /libpath:"../../openal/libs/win64" /MAPINFO:EXPORTS /MAPINFO:LINES /FORCE:MULTIPLE
+# ADD LINK32 Quartz.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib /nologo /subsystem:windows /map /debug /machine:I386 /nodefaultlib:"libc.lib" /nodefaultlib:"libcd.lib" /nodefaultlib:"libcmt.lib" /out:"Debug/fred2_open_3_7_1-debug.exe" /pdbtype:sept /libpath:"Debug" /libpath:"../../STLport-5.2.1/lib" /libpath:"../../oggvorbis/lib" /libpath:"../../openal/libs/win32" /libpath:"../../openal/libs/win64" /MAPINFO:EXPORTS /MAPINFO:LINES /FORCE:MULTIPLE
 # SUBTRACT LINK32 /pdb:none
 # Begin Custom Build - Copying build...
-InputPath=.\Debug\fred2_open_3_7_2-debug.exe
+InputPath=.\Debug\fred2_open_3_7_1-debug.exe
 SOURCE="$(InputPath)"
 
-"$(FS2PATH)/fred2_open_3_7_2-debug.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	copy /y $(InputPath) "$(FS2PATH)/fred2_open_3_7_2-debug.exe"
+"$(FS2PATH)/fred2_open_3_7_1-debug.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	copy /y $(InputPath) "$(FS2PATH)/fred2_open_3_7_1-debug.exe"
 
 # End Custom Build
 

projects/MSVC_6/Freespace2.dsp

@@ -54,14 +54,14 @@ BSC32=bscmake.exe
 # ADD BSC32 /nologo /o"Release\Profile\Freespace2.bsc" "Release\Profile\*.sbr"
 LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /machine:I386
-# ADD LINK32 Quartz.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib /nologo /subsystem:windows /pdb:none /machine:I386 /nodefaultlib:"libc.lib" /nodefaultlib:"libcd.lib" /out:"Release/fs2_open_3_7_2.exe" /libpath:"Release" /libpath:"../../STLport-5.2.1/lib" /libpath:"../../oggvorbis/lib" /libpath:"../../openal/libs/win32" /libpath:"../../openal/libs/win64" /MAPINFO:EXPORTS /MAPINFO:LINES
+# ADD LINK32 Quartz.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib /nologo /subsystem:windows /pdb:none /machine:I386 /nodefaultlib:"libc.lib" /nodefaultlib:"libcd.lib" /out:"Release/fs2_open_3_7_1.exe" /libpath:"Release" /libpath:"../../STLport-5.2.1/lib" /libpath:"../../oggvorbis/lib" /libpath:"../../openal/libs/win32" /libpath:"../../openal/libs/win64" /MAPINFO:EXPORTS /MAPINFO:LINES
 # SUBTRACT LINK32 /map /debug
 # Begin Custom Build - Copying build...
-InputPath=.\Release\fs2_open_3_7_2.exe
+InputPath=.\Release\fs2_open_3_7_1.exe
 SOURCE="$(InputPath)"
 
-"$(FS2PATH)/fs2_open_3_7_2.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	copy /y $(InputPath) "$(FS2PATH)/fs2_open_3_7_2.exe"
+"$(FS2PATH)/fs2_open_3_7_1.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	copy /y $(InputPath) "$(FS2PATH)/fs2_open_3_7_1.exe"
 
 # End Custom Build
 
@@ -89,14 +89,14 @@ BSC32=bscmake.exe
 # ADD BSC32 /nologo /o"Debug\Profile\Freespace2.bsc" "Debug\Profile\*.sbr"
 LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 Quartz.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib /nologo /subsystem:windows /map /debug /debugtype:both /machine:I386 /nodefaultlib:"libc.lib" /nodefaultlib:"libcd.lib" /nodefaultlib:"libcmt.lib" /out:"Debug\fs2_open_3_7_2-debug.exe" /libpath:"Debug" /libpath:"../../STLport-5.2.1/lib" /libpath:"../../oggvorbis/lib" /libpath:"../../openal/libs/win32" /libpath:"../../openal/libs/win64" /MAPINFO:EXPORTS /MAPINFO:LINES
+# ADD LINK32 Quartz.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib wsock32.lib winmm.lib vfw32.lib msacm32.lib comctl32.lib openal32.lib ogg_static.lib vorbis_static.lib vorbisfile_static.lib theora_static.lib /nologo /subsystem:windows /map /debug /debugtype:both /machine:I386 /nodefaultlib:"libc.lib" /nodefaultlib:"libcd.lib" /nodefaultlib:"libcmt.lib" /out:"Debug\fs2_open_3_7_1-debug.exe" /libpath:"Debug" /libpath:"../../STLport-5.2.1/lib" /libpath:"../../oggvorbis/lib" /libpath:"../../openal/libs/win32" /libpath:"../../openal/libs/win64" /MAPINFO:EXPORTS /MAPINFO:LINES
 # SUBTRACT LINK32 /pdb:none /incremental:no
 # Begin Custom Build - Copying build...
-InputPath=.\Debug\fs2_open_3_7_2-debug.exe
+InputPath=.\Debug\fs2_open_3_7_1-debug.exe
 SOURCE="$(InputPath)"
 
-"$(FS2PATH)/fs2_open_3_7_2-debug.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	copy /y $(InputPath) "$(FS2PATH)/fs2_open_3_7_2-debug.exe"
+"$(FS2PATH)/fs2_open_3_7_1-debug.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	copy /y $(InputPath) "$(FS2PATH)/fs2_open_3_7_1-debug.exe"
 
 # End Custom Build
 

projects/MSVC_6/wxFRED2.dsp

@@ -54,18 +54,18 @@ BSC32=bscmake.exe
 # ADD BSC32 /nologo /o"Release/Profile/wxFRED2.bsc" "Release\Profile\*.sbr"
 LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib comctl32.lib rpcrt4.lib wsock32.lib winmm.lib wxmsw28_xrc.lib wxmsw28_html.lib wxmsw28_adv.lib wxmsw28_core.lib wxbase28_xml.lib wxbase28.lib wxtiff.lib wxjpeg.lib wxpng.lib wxzlib.lib wxregex.lib wxexpat.lib /nologo /subsystem:windows /pdb:none /machine:I386 /nodefaultlib:"libc.lib" /nodefaultlib:"libci.lib" /out:"Release/wxfred2_open_3_7_2.exe" /libpath:"../../STLport-5.2.1/lib" /libpath:"$(WXWIN)/lib" /libpath:"$(WXWIN)/lib/vc_lib"
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib comctl32.lib rpcrt4.lib wsock32.lib winmm.lib wxmsw28_xrc.lib wxmsw28_html.lib wxmsw28_adv.lib wxmsw28_core.lib wxbase28_xml.lib wxbase28.lib wxtiff.lib wxjpeg.lib wxpng.lib wxzlib.lib wxregex.lib wxexpat.lib /nologo /subsystem:windows /pdb:none /machine:I386 /nodefaultlib:"libc.lib" /nodefaultlib:"libci.lib" /out:"Release/wxfred2_open_3_7_1.exe" /libpath:"../../STLport-5.2.1/lib" /libpath:"$(WXWIN)/lib" /libpath:"$(WXWIN)/lib/vc_lib"
 # SUBTRACT LINK32 /map /debug /nodefaultlib
 # Begin Custom Build - Copying build...
 ProjDir=.
-InputPath=.\Release\wxfred2_open_3_7_2.exe
+InputPath=.\Release\wxfred2_open_3_7_1.exe
 SOURCE="$(InputPath)"
 
 BuildCmds= \
-	copy $(InputPath) "$(FS2PATH)\wxfred2_open_3_7_2.exe" \
+	copy $(InputPath) "$(FS2PATH)\wxfred2_open_3_7_1.exe" \
 	copy "$(ProjDir)\..\..\code\wxfred2\wxfred.xrc" "$(FS2PATH)\wxfred.xrc" \
 
-"$(FS2PATH)\wxfred2_open_3_7_2.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+"$(FS2PATH)\wxfred2_open_3_7_1.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
    $(BuildCmds)
 
 "$(FS2PATH)\wxfred.xrc" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
@@ -96,18 +96,18 @@ BSC32=bscmake.exe
 # ADD BSC32 /nologo /o"Debug/Profile/wxFRED2.bsc" "Debug\Profile\*.sbr"
 LINK32=link.exe
 # ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib comctl32.lib rpcrt4.lib wsock32.lib winmm.lib wxmsw28d_xrc.lib wxmsw28d_html.lib wxmsw28d_adv.lib wxmsw28d_core.lib wxbase28d_xml.lib wxbase28d.lib wxtiffd.lib wxjpegd.lib wxpngd.lib wxzlibd.lib wxregexd.lib wxexpatd.lib /nologo /subsystem:windows /map /debug /machine:I386 /nodefaultlib:"libcd.lib" /nodefaultlib:"libcid.lib" /out:"Debug/wxfred2_open_3_7_2-debug.exe" /pdbtype:sept /libpath:"../../STLport-5.2.1/lib" /libpath:"$(WXWIN)/lib" /libpath:"$(WXWIN)/lib/vc_lib"
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib comctl32.lib rpcrt4.lib wsock32.lib winmm.lib wxmsw28d_xrc.lib wxmsw28d_html.lib wxmsw28d_adv.lib wxmsw28d_core.lib wxbase28d_xml.lib wxbase28d.lib wxtiffd.lib wxjpegd.lib wxpngd.lib wxzlibd.lib wxregexd.lib wxexpatd.lib /nologo /subsystem:windows /map /debug /machine:I386 /nodefaultlib:"libcd.lib" /nodefaultlib:"libcid.lib" /out:"Debug/wxfred2_open_3_7_1-debug.exe" /pdbtype:sept /libpath:"../../STLport-5.2.1/lib" /libpath:"$(WXWIN)/lib" /libpath:"$(WXWIN)/lib/vc_lib"
 # SUBTRACT LINK32 /nodefaultlib
 # Begin Custom Build - Copying build...
 ProjDir=.
-InputPath=.\Debug\wxfred2_open_3_7_2-debug.exe
+InputPath=.\Debug\wxfred2_open_3_7_1-debug.exe
 SOURCE="$(InputPath)"
 
 BuildCmds= \
-	copy $(InputPath) "$(FS2PATH)/wxfred2_open_3_7_2-debug.exe" \
+	copy $(InputPath) "$(FS2PATH)/wxfred2_open_3_7_1-debug.exe" \
 	copy "$(ProjDir)\..\..\code\wxfred2\wxfred.xrc" "$(FS2PATH)\wxfred.xrc" \
 
-"$(FS2PATH)/wxfred2_open_3_7_2-debug.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+"$(FS2PATH)/wxfred2_open_3_7_1-debug.exe" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
    $(BuildCmds)
 
 "$(FS2PATH)\wxfred.xrc" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"

projects/Xcode/FS2_Open.xcodeproj/project.pbxproj

@@ -4534,7 +4534,7 @@
 					i386,
 				);
 				COPY_PHASE_STRIP = NO;
-				CURRENT_PROJECT_VERSION = 3.7.2;
+				CURRENT_PROJECT_VERSION = 3.7.1;
 				DEAD_CODE_STRIPPING = NO;
 				DEBUG_INFORMATION_FORMAT = "dwarf-with-dsym";
 				DEPLOYMENT_POSTPROCESSING = YES;
@@ -4567,7 +4567,7 @@
 					i386,
 				);
 				COPY_PHASE_STRIP = NO;
-				CURRENT_PROJECT_VERSION = 3.7.2;
+				CURRENT_PROJECT_VERSION = 3.7.1;
 				DEAD_CODE_STRIPPING = YES;
 				DEBUG_INFORMATION_FORMAT = "dwarf-with-dsym";
 				DEPLOYMENT_POSTPROCESSING = YES;

projects/Xcode4/FS2_Open.xcodeproj/project.pbxproj

@@ -614,6 +614,8 @@
 		918A074C1804B4A600983AE1 /* libjansson.a in Frameworks */ = {isa = PBXBuildFile; fileRef = 918A07221804AFAA00983AE1 /* libjansson.a */; };
 		918A074D1804B4A600983AE1 /* libmongoose.a in Frameworks */ = {isa = PBXBuildFile; fileRef = 918A07141804AF0F00983AE1 /* libmongoose.a */; };
 		9193B29817EDFEB7003CC0BA /* profiling.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 9193B29717EDFEB7003CC0BA /* profiling.cpp */; };
+		91F4EE3A1AB32675006EF158 /* hashtable_seed.c in Sources */ = {isa = PBXBuildFile; fileRef = 91F4EE381AB32675006EF158 /* hashtable_seed.c */; };
+		91F4EE3B1AB32675006EF158 /* lookup3.h in Headers */ = {isa = PBXBuildFile; fileRef = 91F4EE391AB32675006EF158 /* lookup3.h */; };
 		F007DDF612F4F44600D2F6C1 /* jconfig.h in Headers */ = {isa = PBXBuildFile; fileRef = F007DDB512F4F44600D2F6C1 /* jconfig.h */; };
 		F007DDF712F4F44600D2F6C1 /* jdct.h in Headers */ = {isa = PBXBuildFile; fileRef = F007DDB612F4F44600D2F6C1 /* jdct.h */; };
 		F007DDF912F4F44600D2F6C1 /* jerror.h in Headers */ = {isa = PBXBuildFile; fileRef = F007DDB812F4F44600D2F6C1 /* jerror.h */; };
@@ -1556,6 +1558,8 @@
 		918A07361804B01800983AE1 /* utf.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = utf.h; sourceTree = "<group>"; };
 		918A07371804B01800983AE1 /* value.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = value.c; sourceTree = "<group>"; };
 		9193B29717EDFEB7003CC0BA /* profiling.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; path = profiling.cpp; sourceTree = "<group>"; };
+		91F4EE381AB32675006EF158 /* hashtable_seed.c */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.c; path = hashtable_seed.c; sourceTree = "<group>"; };
+		91F4EE391AB32675006EF158 /* lookup3.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = lookup3.h; sourceTree = "<group>"; };
 		B2F67ED704C74A3F00A80002 /* OpenGL.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = OpenGL.framework; path = /System/Library/Frameworks/OpenGL.framework; sourceTree = "<absolute>"; };
 		B2F67F1E04C773E400A80002 /* GLUT.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = GLUT.framework; path = /System/Library/Frameworks/GLUT.framework; sourceTree = "<absolute>"; };
 		F007DDB512F4F44600D2F6C1 /* jconfig.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = jconfig.h; sourceTree = "<group>"; };
@@ -3116,6 +3120,8 @@
 		918A07261804B01800983AE1 /* jansson */ = {
 			isa = PBXGroup;
 			children = (
+				91F4EE381AB32675006EF158 /* hashtable_seed.c */,
+				91F4EE391AB32675006EF158 /* lookup3.h */,
 				918A07271804B01800983AE1 /* dump.c */,
 				918A07281804B01800983AE1 /* error.c */,
 				918A07291804B01800983AE1 /* hashtable.c */,
@@ -3544,6 +3550,7 @@
 			buildActionMask = 2147483647;
 			files = (
 				918A07461804B01800983AE1 /* utf.h in Headers */,
+				91F4EE3B1AB32675006EF158 /* lookup3.h in Headers */,
 				918A073B1804B01800983AE1 /* hashtable.h in Headers */,
 				918A073E1804B01800983AE1 /* jansson_private.h in Headers */,
 				918A07431804B01800983AE1 /* strbuffer.h in Headers */,
@@ -4219,6 +4226,7 @@
 			isa = PBXSourcesBuildPhase;
 			buildActionMask = 2147483647;
 			files = (
+				91F4EE3A1AB32675006EF158 /* hashtable_seed.c in Sources */,
 				918A07451804B01800983AE1 /* utf.c in Sources */,
 				918A07391804B01800983AE1 /* error.c in Sources */,
 				918A07441804B01800983AE1 /* strconv.c in Sources */,
@@ -4428,7 +4436,7 @@
 				CLANG_WARN__DUPLICATE_METHOD_MATCH = YES;
 				COMBINE_HIDPI_IMAGES = YES;
 				COPY_PHASE_STRIP = NO;
-				CURRENT_PROJECT_VERSION = "3.7.2";
+				CURRENT_PROJECT_VERSION = "3.7.1";
 				DEAD_CODE_STRIPPING = NO;
 				DEBUG_INFORMATION_FORMAT = "dwarf-with-dsym";
 				DEPLOYMENT_POSTPROCESSING = YES;
@@ -4474,7 +4482,7 @@
 				CLANG_WARN__DUPLICATE_METHOD_MATCH = YES;
 				COMBINE_HIDPI_IMAGES = YES;
 				COPY_PHASE_STRIP = NO;
-				CURRENT_PROJECT_VERSION = "3.7.2";
+				CURRENT_PROJECT_VERSION = "3.7.1";
 				DEAD_CODE_STRIPPING = YES;
 				DEBUG_INFORMATION_FORMAT = "dwarf-with-dsym";
 				DEPLOYMENT_POSTPROCESSING = YES;
@@ -4587,6 +4595,13 @@
 				CLANG_WARN_DIRECT_OBJC_ISA_USAGE = YES_ERROR;
 				CLANG_WARN_OBJC_ROOT_CLASS = YES_ERROR;
 				EXECUTABLE_PREFIX = lib;
+				GCC_PREPROCESSOR_DEFINITIONS = (
+					_DEBUG,
+					SCP_UNIX,
+					USE_OPENAL,
+					APPLE_APP,
+					HAVE_STDINT_H,
+				);
 				GCC_WARN_ABOUT_RETURN_TYPE = YES_ERROR;
 				PRODUCT_NAME = "$(TARGET_NAME)";
 			};
@@ -4599,6 +4614,13 @@
 				CLANG_WARN_DIRECT_OBJC_ISA_USAGE = YES_ERROR;
 				CLANG_WARN_OBJC_ROOT_CLASS = YES_ERROR;
 				EXECUTABLE_PREFIX = lib;
+				GCC_PREPROCESSOR_DEFINITIONS = (
+					NDEBUG,
+					SCP_UNIX,
+					USE_OPENAL,
+					APPLE_APP,
+					HAVE_STDINT_H,
+				);
 				GCC_WARN_ABOUT_RETURN_TYPE = YES_ERROR;
 				PRODUCT_NAME = "$(TARGET_NAME)";
 			};

projects/codeblocks/Freespace2/Freespace2.cbp

@@ -8,7 +8,7 @@
 		<Option virtualFolders="Freespace2/;" />
 		<Build>
 			<Target title="Debug">
-				<Option output="../Debug/Freespace2/lib/fs2_open_3_7_2_debug" prefix_auto="1" extension_auto="1" />
+				<Option output="../Debug/Freespace2/lib/fs2_open_3_7_1_debug" prefix_auto="1" extension_auto="1" />
 				<Option working_dir="../freespaceDirectoryLink" />
 				<Option object_output="../Debug/Freespace2/obj/" />
 				<Option type="1" />
@@ -24,7 +24,7 @@
 				</Linker>
 			</Target>
 			<Target title="Release">
-				<Option output="../Release/Freespace2/lib/fs2_open_3_7_2" prefix_auto="1" extension_auto="1" />
+				<Option output="../Release/Freespace2/lib/fs2_open_3_7_1" prefix_auto="1" extension_auto="1" />
 				<Option object_output="../Release/Freespace2/obj/" />
 				<Option type="0" />
 				<Option compiler="gcc" />