Don't load jump target into the CPU config, instead put it and initial
a2 as literals into the mini bootloader and use l32r to load them
natively. With these changes it should be possible to do warm reboot of
the guest.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The GICv2 specification says that reserved register addresses
must RAZ/WI; now that we implement external abort handling
for Arm CPUs this means we must return MEMTX_OK rather than
MEMTX_ERROR, to avoid generating a spurious guest data abort.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
The GICv3 specification says that reserved register addresses
should RAZ/WI. This means we need to return MEMTX_OK, not MEMTX_ERROR,
because now that we support generating external aborts the
latter will cause an abort on new board models.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1513183941-24300-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Refactor disas_thumb2_insn() so that it generates the code for raising
an UNDEF exception for invalid insns, rather than returning a flag
which the caller must check to see if it needs to generate the UNDEF
code. This brings the function in to line with the behaviour of
disas_thumb_insn() and disas_arm_insn().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1513080506-17703-1-git-send-email-peter.maydell@linaro.org
Our copy of the nwfpe code for emulating of the old FPA11 floating
point unit doesn't check the coprocessor number in the instruction
when it emulates it. This means that we might treat some
instructions which should really UNDEF as being FPA11 instructions by
accident.
The kernel's copy of the nwfpe code doesn't make this error; I suspect
the bug was noticed and fixed as part of the process of mainlining
the nwfpe code more than a decade ago.
Add a check that the coprocessor number (which is always in bits
[11:8] of the instruction) is either 1 or 2, which is where the
FPA11 lives.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180103224208.30291-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some i.MX SoCs (e.g. i.MX7) have FEC registers going as far as offset
0x614, so to avoid getting aborts when accessing those on QEMU, extend
the register file to cover FSL_IMX25_FEC_SIZE(16K) of address space
instead of just 1K.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use 'frame_size' instead of 'len' when calling qemu_send_packet(),
failing to do so results in malformed packets send in case when that
packed is fragmented into multiple DMA transactions.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
More recent version of the IP block support more than one Tx DMA ring,
so add the code implementing that feature.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Needed to support latest Linux kernel driver which relies on that
functionality.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Frame truncation length, TRUNC_FL, is determined by the contents of
ENET_FTRL register, so convert the code to use it instead of a
hardcoded constant.
To avoid the case where TRUNC_FL is greater that ENET_MAX_FRAME_SIZE,
increase the value of the latter to its theoretical maximum of 16K.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make Tx frame assembly buffer to be a paort of IMXFECState structure
to avoid a concern about having large data buffer on the stack.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In current implementation, packet queue flushing logic seem to suffer
from a deadlock like scenario if a packet is received by the interface
before before Rx ring is initialized by Guest's driver. Consider the
following sequence of events:
1. A QEMU instance is started against a TAP device on Linux
host, running Linux guest, e. g., something to the effect
of:
qemu-system-arm \
-net nic,model=imx.fec,netdev=lan0 \
netdev tap,id=lan0,ifname=tap0,script=no,downscript=no \
... rest of the arguments ...
2. Once QEMU starts, but before guest reaches the point where
FEC deriver is done initializing the HW, Guest, via TAP
interface, receives a number of multicast MDNS packets from
Host (not necessarily true for every OS, but it happens at
least on Fedora 25)
3. Recieving a packet in such a state results in
imx_eth_can_receive() returning '0', which in turn causes
tap_send() to disable corresponding event (tap.c:203)
4. Once Guest's driver reaches the point where it is ready to
recieve packets it prepares Rx ring descriptors and writes
ENET_RDAR_RDAR to ENET_RDAR register to indicate to HW that
more descriptors are ready. And at this points emulation
layer does this:
s->regs[index] = ENET_RDAR_RDAR;
imx_eth_enable_rx(s);
which, combined with:
if (!s->regs[ENET_RDAR]) {
qemu_flush_queued_packets(qemu_get_queue(s->nic));
}
results in Rx queue never being flushed and corresponding
I/O event beign disabled.
To prevent the problem, change the code to always flush packet queue
when ENET_RDAR transitions 0 -> ENET_RDAR_RDAR.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refactor imx_eth_enable_rx() to have more meaningfull variable name
than 'tmp' and to reduce number of logical negations done.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Binding to a particular netdev doesn't seem to belong to this layer
and should probably be done as a part of board or SoC specific code.
Convert all of the users of this IP block to use
qdev_set_nic_properties() instead.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
Cc: yurovsky@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
acpi_data_push uses g_array_set_size to resize the memory size. If there
is no enough contiguous memory, the address will be changed. If we use
the old value, it will assert.
qemu-kvm: hw/acpi/bios-linker-loader.c:214: bios_linker_loader_add_checksum:
Assertion `start_offset < file->blob->len' failed.`
This issue only happens in building SRAT table now but here we unify the
pattern for other tables as well to avoid possible issues in the future.
Signed-off-by: Zhaoshenglong <zhaoshenglong@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ldxp loads two consecutive doublewords from memory regardless of CPU
endianness. On store, stlxp currently assumes to work with a 128bit
value and consequently switches order in big-endian mode. With this
change it packs the doublewords in reverse order in anticipation of the
128bit big-endian store operation interposing them so they end up in
memory in the right order. This makes it work for both MTTCG and !MTTCG.
It effectively implements the ARM ARM STLXP operation pseudo-code:
data = if BigEndian() then el1:el2 else el2:el1;
With this change an aarch64_be Linux 4.14.4 kernel succeeds to boot up
in system emulation mode.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
armeb is missing from the target list in qemu-binfmt-conf.sh. Add it so
the handler for those binaries gets registered by the script.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-8-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Give big-endian arm and aarch64 CPUs their own family in
qemu-binfmt-conf.sh to make sure we register qemu-user for binaries of
the opposite endianness on arm and aarch64. Apart from the family
assignments of the magic values, qemu_get_family() needs to be able to
distinguish the two and recognise aarch64{,_be} as well.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-7-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As we now have a linux-user aarch64_be target, we can add it to the list
of supported targets in qemu-binfmt-conf.sh
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-6-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add target aarch64_be-linux-user. This allows a qemu-aarch64_be binary
to be built that will run big-endian aarch64 binaries.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-5-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since for aarch64 the signal trampoline is synthesized directly into the
signal frame we need to make sure the instructions end up little-endian.
Otherwise the wrong endianness will cause a SIGILL upon return from the
signal handler on big-endian targets.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-4-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make big-endian aarch64 systems identify as aarch64_be as expected by
big-endian userland and toolchains.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-3-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable big-endian mode for data accesses on aarch64 for big-endian linux
user mode. Activate it for all exception levels as documented by ARM:
Set the SCTLR EE bit for ELs 1 through 3. Additionally set bit E0E in
EL1 to enable it in EL0 as well.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-2-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This pull request supersedes ppc-for-2.12-20180108 and several before
it. The earlier pull request included a patch which exposed a bug in
the ARM TCG backend. I've pulled that out and will repost once the
ARM bug is fixed (a patch has been posted by Richard Henderson).
Higlights from this series:
* SLOF update
* Several new devices for embedded platforms
* Fix to correctly set compatiblity mode for hotplugged CPUs
* dtc compile fix for older MacOS versions
-----BEGIN PGP SIGNATURE-----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=W8lr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180111' into staging
ppc patch queue 2018-01-11
This pull request supersedes ppc-for-2.12-20180108 and several before
it. The earlier pull request included a patch which exposed a bug in
the ARM TCG backend. I've pulled that out and will repost once the
ARM bug is fixed (a patch has been posted by Richard Henderson).
Higlights from this series:
* SLOF update
* Several new devices for embedded platforms
* Fix to correctly set compatiblity mode for hotplugged CPUs
* dtc compile fix for older MacOS versions
# gpg: Signature made Thu 11 Jan 2018 04:58:11 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.12-20180111:
spapr: Correct compatibility mode setting for hotplugged CPUs
hw/ppc: Remove the deprecated spapr-pci-vfio-host-bridge device
Update dtc to fix compilation problem on Mac OS 10.6
target/ppc: more use of the PPC_*() macros
ppc/pnv: change powernv_ prefix to pnv_ for overall naming consistency
hw/ide: Emulate SiI3112 SATA controller
spapr_pci: use warn_report()
ppc4xx_i2c: Implement basic I2C functions
sm501: Add some more unimplemented registers
sm501: Add panel hardware cursor registers also to read function
pseries: Update SLOF firmware image to qemu-slof-20171214
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAlpVPkYeHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIf27MIAIxw7dIYn9ez/uNv
7iQpTp+aJjEnPhsjcshfzHfPej7d1h6ot6midy75hKb3NfyOG3RN23N5mzK4Mzjf
ybHtXhTjYJl5gndaM0jCdaU5EYDq3BU6kkXS3WJy2hNayfFkRpeLWBR7pdxAGrP3
bp1r064tl3sA8ALYVWFyldgf3o2AuJSxjDFRgbRRIbX1KRLnMwB2gM7ix4FCykcK
YVIG113J4BAkTuD9vfBRz2f/Gs+zdqjprFVGccyej70qvhjnW7bgL78uYvHMzbST
CuLULx9v3es8/s7fd1GSxZj45YTkivUPzFI4n2I0qWApTcJVBoGqj5f8EvwD/y67
A4eiFAQ=
=EPl3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging
qemu-sparc update
# gpg: Signature made Tue 09 Jan 2018 22:12:22 GMT
# gpg: using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-sparc-signed: (25 commits)
sun4u_iommu: add trace event for IOMMU translations
sun4u_iommu: convert from IOMMU_DPRINTF to trace-events
sun4u_iommu: update to reflect IOMMU is no longer part of the APB device
sun4u: split IOMMU device out from apb.c to sun4u_iommu.c
apb: QOMify IOMMU
sun4m: remove include/hw/sparc/sun4m.h and all references to it
sun4m: move IOMMU declarations from sun4m.h to sun4m_iommu.h
sun4m: move sun4m_iommu.c from hw/dma to hw/sparc
sun4u: switch from EBUS_DPRINTF() macro to trace-events
sparc64: introduce trace-events for hw/sparc64
apb: replace OBIO interrupt numbers in pci_pbmA_map_irq() with constants
ebus: wire up OBIO interrupts to APB pbm via qdev GPIOs
apb: remove busA property from PBMPCIBridge state
apb: split pci_pbm_map_irq() into separate functions for bus A and bus B
apb: remove pci_apb_init() and instantiate APB device using qdev
apb: move the two secondary PCI bridges objects into APBState
apb: use gpios to wire up the apb device to the SPARC CPU IRQs
apb: return APBState from pci_apb_init() rather than PCIBus
apb: APB QOMify tidy-up
sun4u: move initialisation of all ISABus devices into ebus_realize()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename nbd_option and nbd_opt_reply to NBDOption and NBDOptionReply
to correspond to Qemu coding style and other structures here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171122101958.17065-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the pseries machine sets the compatibility mode for the
guest's cpus in two places: 1) at machine reset and 2) after CAS
negotiation.
This means that if we set or negotiate a compatiblity mode, then
hotplug a cpu, the hotplugged cpu doesn't get the right mode set and
will incorrectly have the full native features.
To correct this, we set the compatibility mode on a cpu when it is
brought online with the 'start-cpu' RTAS call. Given that we no
longer need to set the compatibility mode on all CPUs at machine
reset, so we change that to only set the mode for the boot cpu.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
It's a deprecated dummy device since QEMU v2.6.0. That should have
been enough time to allow the users to update their scripts in case
they still use it, so let's remove this legacy code now.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently QEMU does not build on Mac OS 10.6
because of a missing patch in the dtc
subproject. Updating dtc to make the patch
available fixes this problem.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also introduce utilities to manipulate bitmasks (originaly from OPAL)
which be will be used in the model of the XIVE interrupt controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'pnv' prefix is now used for all and the routines populating the
device tree start with 'pnv_dt'. The handler of the PnvXScomInterface
is also renamed to 'dt_xscom' which should reflect that it is
populating the device tree under the 'xscom@' node of the chip.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is a common generic PCI SATA controller that is also used in PCs
but more importantly guests running on the Sam460ex board prefer this
card and have a driver for it (unlike for other SATA controllers
already emulated).
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These two are definitely warnings. Let's use the appropriate API.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Enough to please U-Boot and make it able to detect SDRAM SPD EEPROMs
Signed-off-by: François Revol <revol@free.fr>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are not really implemented (just return zero or default values)
but add these so guests accessing them can run.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These were forgotten when adding panel layer support in ffd3925701
"SM501 emulation for R2D-SH4".
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[dwg: Added reference to earlier commit in message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The main changes are:
- able to handle more devices with specified bootindex;
- implements flatten device tree rendering, for both QEMU and guest kernel.
The full list is:
> boot: use a temporary bootdev-buf
> boot: do not concatenate bootdev
> libvirtio: Mark struct virtio_scsi_req_cmd as packed
> fdt: Implement "fdt-fetch" method for client interface
> rtas: Store RTAS address and entry in the device tree
> board-qemu: Fix slof-build-id length
> fdt: Pass the resulting device tree to QEMU
> fdt: Fix version and add a word for FDT header size
> tree: Rework set-chosen-cpu and store /chosen ihandle and phandle
> node: Add some documentation
> Revert various SLOF-to-QEMU private hypercalls
> Use input-device and output-device
> netboot: Create bootp-response when bootp is used
> libnet/ipv6: assign times_asked value directly
> usb-xhci: Reset ERSTSZ together with ERSTBA
> virtio-net: rework the driver to support multiple open
> board-qemu: add private hcall to inform host on "phandle" update
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
By separating the sun4u IOMMU device into new sun4u_iommu.c and sun4m_iommu.h
files we noticeably simplify apb.c whilst bringing sun4u in line with all the
other IOMMU-supporting architectures.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
This is in preparation to split the IOMMU device out of the APB. As part of
this commit we also enforce separation of the IOMMU and APB devices by using
a QOM object link to pass the IOMMU reference and accessing the IOMMU registers
via a separate memory region mapped into the APB config space rather than
directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
With the previous commit there is now nothing left in sun4m.h so it can be
removed, along with all remaining references to it.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Also updating the relevant .c files as required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
