Convert cp15 crn=9 registers (mostly cache lockdown) to the new scheme.
Note that this change makes OMAPCP cores RAZ/WI the whole c9 space. This is
a change from previous behaviour, but a return to the behaviour of commit
c3d2689d when OMAP1 support was first added -- subsequent commits have
clearly accidentally relegated the OMAPCP RAZ condition to only a subset of
the crn=9 space when adding support for other cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the cp15 crn=6 registers to the new scheme.
Note that this includes some minor tidyup: drop an unnecessary
underdecoding of op2 on OMAPCP cores, and only implement the
pre-v6 c6,c0,0,1 IFAR on the 1026 and not on the other ARMv5
cores, which didn't have it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the cp15 crn=7 registers to the new scheme.
Note that to do this we have to distinguish some registers
used on the ARM9 and ARM10 from some which are ARM1176
only. This is because the old code returned a value of 0
but always set the Z flag (by clearing env->ZF, since we
store the Z flag in CPUState inverted). This is inconsistent
with actual ARM CPU behaviour, which only sets flags for
reads to r15 and sets them based on the top bits of the result.
However it happened to work for the two common use cases for
cp15 crn=7 reads:
* On ARM9 and ARM10 the cache clean-and-test operations are
typically done with a destination of r15 so that you can do
a "loop: mrc ... ; bne loop" to keep cleaning until the cache
is finally clean; always setting the Z flag means this loop
terminates immediately
* on ARM1176 the Cache Dirty Status Register reads as zero
if the cache is dirty; returning 0 means this is correctly
implemented for QEMU
Since the new coprocessor register framework does the right
thing of always setting flags based on the returned result
for reads to r15, we need to split these up so that we can
return (1<<30) for the ARM9/ARM10 registers but 0 for the
ARM1176 one.
This allows us to remove the nasty hack which always sets Z.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We RAZ/WI the entire block of crn=10 registers. Note that this
actually covers not just the implementation-defined TLB
lockdown registers but also a number of v7 VMSA memory
attribute registers which we would need to implement to
support TEX remap. We retain the previous QEMU behaviour
in this conversion, though.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the cp15 crn=13 registers (FCSEIDR, CONTEXTIDR,
and the ARM946 Trace Process Identifier Register).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the cp15 crn=2 registers (MMU page table control,
MPU cache control) to the new scheme.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the cp15 c3 register (MMU domain access control
or MPU write buffer control). NB that this is horribly
underdecoded for modern cores (should be crn=3,crm=0,
opc1=0,opc2=0) but this change preserves the existing
QEMU behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the various WFI and barrier instruction special cases to use
cp_reginfo infrastructure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add new function register_cp_regs_for_features() as a place to
register coprocessor registers dependent on feature flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All the users of cpu_arm_set_cp_io have been converted, so we
can remove it and the infrastructure it used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initial infrastructure for data-driven registration of
coprocessor register implementations.
We still fall back to the old-style switch statements pending
complete conversion of all existing registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the 11MPCore report a valid value in its cache type register
(the previous value appears to have been incorrectly copied from
the 1136/1176). In particular, do not report that we have an
aliasing VIPT cache, because this causes Linux to attempt to use
the v6 block cache ops which the 11MPCore doesn't actually have.
(This causes no problems currently because we over-broadly provide
those ops on all cores, but prevents us correctly narrowing the
block ops down to those cores which actually implement them.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU exposes its version to the guest's hardware and in some cases that is wrong
(e.g. Windows prints messages about driver updates when you switch
the QEMU version).
There is a new field now on the struct QEmuMachine, hw_version, which may
contain the version that the specific machine should report. If that field is
set, then that machine will report that version to the guest.
Signed-off-by: Crístian Viana <vianac@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds two things. First it allows QEMU to distinguish between
regular powerdown and S4 powerdown. Later separate QMP notification will
be added for S4 powerdown. Second it allows S3/S4 states to be disabled
from QEMU command line. Some guests known to be broken with regards to
power management, but allow to use it anyway. Using new properties
management will be able to disable S3/S4 for such guests.
Supported system state are passed to a firmware using new fw_cfg file.
The file contains 6 byte array. Each byte represents one system
state. If byte at offset X has its MSB set it means that system state
X is supported and to enter it guest should use the value from lowest 3
bits.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I think I understand enough of what's going on in these rules to ensure this is
right. But I could certainly use a second or third opinion...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fedora 17's toolchain wants optimization enabled for _FORTIFY_SOURCE;
so disable _FORTIFY_SOURCE when debugging.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* afaerber-or/qom-next-2: (22 commits)
qom: Push error reporting to object_property_find()
qdev: Remove qdev_prop_exists()
qbus: Initialize in standard way
qbus: Make child devices links
qdev: Connect busses with their parent devices
qdev: Convert busses to QEMU Object Model
qdev: Move SysBus initialization to sysbus.c
qdev: Use wrapper for qdev_get_path
qdev: Remove qdev_prop_set_defaults
qdev: Clean up global properties
qdev: Move bus properties to abstract superclasses
qdev: Move bus properties to a separate global
qdev: Push "type" property up to Object
arm_l2x0: Rename "type" property to "cache-type"
m48t59: Rename "type" property to "model"
qom: Assert that public types have a non-NULL parent field
qom: Drop type_register_static_alias() macro
qom: Make Object a type
qom: Add class_base_init
qom: Add object_child_foreach()
...
* qmp/queue/qmp:
build: install qmp-commands.txt
Add rate limiting of RTC_CHANGE, BALLOON_CHANGE & WATCHDOG events
Add event notification for guest balloon changes
Fix some more license versions (GPL2+ instead of GPL2)
monitor: Fix memory leak with readline completion
qmp: do not include monitor.h from qapi-types-core.h
qmp: include monitor.h when needed
kvm: add missing include files
* kwolf/for-anthony: (39 commits)
qemu-iotests: add 036 autoclear feature bit test
qemu-iotests: add qcow2.py set-feature-bit command
fdc-test: introduced qtest read_without_media
fdc: fix implied seek while there is no media in drive
qcow2: fix autoclear image header update
xen: Don't peek behind the BlockDriverState abstraction
xen: Don't change -drive if=xen device name during machine init
block: Replace bdrv_get_format() by bdrv_get_format_name()
qemu-img: document qed format on qemu-img man page
qemu-iotests: COW with many AIO requests on the same cluster
qemu-iotests: Some backing file COW tests
qcow2: Fix avail_sectors in cluster allocation code
qcow2: Simplify calculation for COW area at the end
qcow2: always operate caches in writeback mode
ide: support enable/disable write cache
block: always open drivers in writeback mode
block: add bdrv_set_enable_write_cache
block: copy enable_write_cache in bdrv_append
savevm: flush after saving vm state
block: flush in writethrough mode after writes
...
* mst/tags/for_anthony:
pci_bridge_dev: fix error path in pci_bridge_dev_initfn()
qdev: release parent properties on dc->init failure
msi: Use msi/msix_present more consistently
msi: Invoke msi/msix_write_config from PCI core
msi: Guard msi/msix_write_config with msi_present
msi: Invoke msi/msix_reset from PCI core
msi: Guard msi_reset with msi_present
ahci: Clean up reset functions
intel-hda: Fix reset of MSI function
ahci: Fix reset of MSI function
rtl8139: honor RxOverflow flag in can_receive method
shpc: unparent device before free
* sweil/for-anthony:
Fix some more license versions (GPL2+ instead of GPL2)
dump: Fix license version (GPL2+ instead of GPL2)
configure: Fix build for some versions of glibc (9pfs)
monitor: Fix memory leak with readline completion
Avoids duplicated error_set().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Also drop error_set() in object_property_del().]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Can be replaced everywhere with object_property_find().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move code to an initfn and finalizer.
Replace do_qbus_create_inplace() with qbus_realize().
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Make qbus children show up as link<> properties. There is no stable
addressing for qbus children so we use an unstable naming convention.
This is okay in QOM though because the composition name is expected to
be what's stable.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This makes SysBus part of the root hierarchy and all busses children of
their respective parent DeviceState.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is far less interesting than it sounds. We simply add an Object to each
BusState and then register the types appropriately. Most of the interesting
refactoring will follow in the next patches.
Since we're changing fundamental type names (BusInfo -> BusClass), it all needs
to convert at once. Fortunately, not a lot of code is affected.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Made all new bus TypeInfos static const.]
[AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated]
Signed-off-by: Andreas Färber <afaerber@suse.de>
TYPE_SYSTEM_BUS will be local to hw/sysbus.c, so move existing references
to main_system_bus and system_bus_info there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This makes it easier to remove it from BusInfo.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead, qdev_property_add_static can set the default.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now that global properties do not depend on buses anymore, set
them directly in the device instance_init function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In qdev, each bus in practice identified an abstract superclass, but
this was mostly hidden. In QOM, instead, these abstract classes are
explicit so we can move bus properties there.
All bus property walks are removed, and all device property walks
are changed to look along the class hierarchy instead.
We would have duplicates if class A defines some properties and its
subclass B does not define any, because class_b->props will be
left equal to class_a->props.
The solution here is to reintroduce the class_base_init TypeInfo
callback, that was present in one of the early QOM versions but
removed (on my request...) before committing.
This breaks global bus properties, an obscure feature when used
with the command-line which is actually useful and used when used by
backwards-compatible machine types. So this patch also adjusts the
global bus properties in hw/pc_piix.c to refer to the abstract class.
Globals and other properties must be modified in the same patch to
avoid complications related to initialization ordering.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Simple code movement in order to simplify future refactoring.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now that Object is a type, add an instance_init function and push
the "type" property from qdev to there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Resolves a name conflict with the qdev "type" property that is about to
be moved to Object.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
This resolves a name conflict with the qdev "type" property that is
about to move into Object.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Add braces missing in original code.]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This protects against unwanted effects of changing TYPE_OBJECT from
NULL to a string.
Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
