CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Within a delay slot, we were squishing both DISAS_IAQ_N_STALE and
DISAS_IAQ_N_STALE_EXIT to DISAS_IAQ_N_UPDATED. This lost the
required exit to the main loop, and could result in interrupts
never being delivered.
Tested-by: Sven Schnelle <svens@stackframe.org>
Reported-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current code assumes that we don't need to exit the TB
if a Data Cache Flush or Insert has happend. However, as we
have a shared Data/Instruction TLB, a Data cache flush also
flushes Instruction TLB entries, and a Data cache TLB insert
might also evict a Instruction TLB entry.
So exit the TB in all cases if Instruction translation is enabled.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-11-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-10-svens@stackframe.org>
[rth: Add required tlb flushing when prot id registers change.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ODE software calls itlbp on existing TLB entries without
calling itlba first, so this seems to be valid.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-9-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
b,gate does GR[t] ← cat(GR[t]{0..29},IAOQ_Front{30..31});
instead of saving the link address to register t.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-8-svens@stackframe.org>
[rth: Move link check outside of ifndef CONFIG_USER_ONLY;
use ctx->privilege; nullify the insn earlier.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
DIAG is usually only used by diagnostics software as it's CPU
specific. In most of the cases it's better to ignore it and log
a message that it's not implemented.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-7-svens@stackframe.org>
[rth: Free the nullify condition.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
HP ODE use rfi to set the Q bit, and i don't see anything in the
documentation that this is forbidden. So remove it.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-6-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To ease TLB debugging add a few trace events, which are disabled
by default so that there's no performance impact.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-5-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-4-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Assume the following sequence:
pitlbe r0(sr0,r0)
iitlba r4,(sr0,r0)
ldil L%3000000,r5
iitlbp r5,(sr0,r0)
This will purge the whole TLB and add an entry for page 0. However
the current TLB implementation in helper_iitlba() will store to
the last empty TLB entry, while helper_iitlbp() will write to the
first empty entry. That is because an empty entry will match address
0 in helper_iitlba()
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-3-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When one of the source registers is the same as the destination register,
the source register gets overwritten with the destionation value before
do_add_sv() is called, which leads to unexpection condition matches.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190311191602.25796-2-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We got away with eliding this check when target/hppa was user-only,
but missed adding this check when adding system support.
Fixes an early crash in the HP-UX 11 installer.
Reported-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can eliminate an extra TB in this case, which merely
loads a "return address" into rn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For priv levels 1 & 2, we were doing so from do_ibranch_priv.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It looks like the operands where exchanged. HP bootrom tests the
following sequence:
0x00000000f0004064: ldil L%-66666800,r7
0x00000000f0004068: addi 19f,r7,r7
0x00000000f000406c: addi -1,r0,rp
0x00000000f0004070: addi f,r0,r4
0x00000000f0004074: addi 1,r4,r5
0x00000000f0004078: dcor rp,r6
0x00000000f000407c: cmpb,<>,n r6,r7,0xf000411
This returned 0x66666661 instead of the expected 0x9999999f in QEMU.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190211181907.2219-6-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These conditions include the signed overflow bit. See page 5-3
of the Parisc 1.1 Architecture Reference Manual for details.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
[rth: More changes for c == 3, to compute (N^V)|Z properly.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will be fixing do_cond vs signed overflow, which requires
that do_log_cond not rely on do_cond.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When QEMU is compiled with -O0, these functions are inlined
which will cause a wrong restart address generated for the TB.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190211181907.2219-2-svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that the implementation is entirely within the generated
decode function, eliminate the wrapper.
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With decodetree.py, the specializations would conflict so we
must have a single entry point for all variants of OR.
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the BREAK instruction to start.
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of returning DisasJumpType, immediately store it.
Return true in preparation for conversion to the decodetree script.
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PA-RISC specification says: "Setting the PSW Q-bit, PSW{28}, to 1
with this instruction, if it was not already 1, is an undefined
operation." However, at least HP-UX 10.20 sets the Q bit from 0 to 1
with the SSM instruction. Tested this both on HP9000/712 and
HP9000/785/C3750, both machines set the Q bit from 0 to 1 without
exception. This makes HP-UX 10.20 progress a little bit further.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190129191402.29539-1-svens@stackframe.org>
[rth: Add a comment to the code as well.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While doing 'set $pcoqh=0xf0000000' i triggered the assertion below.
The argument order for deposit64() is wrong, and val needs to be
moved to the end.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20190128165333.3814-1-svens@stackframe.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because they are supposed to remain const.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On PCXS chips (PA7000, pa 1.1a), trap #18 is raised on memory faults,
while all later chips (>= PA7100) generate either trap #26, #27 or #28
(depending on the fault type).
Since the current qemu emulation emulates a B160L machine (with a
PA7300LC PCX-L2 chip, we should raise trap #26 (EXCP_DMAR) instead
of #18 (EXCP_DMP) on access faults by the Linux kernel to page zero.
With the patch we now get the correct output (I tested against real
hardware):
Kernel Fault: Code=26 (Data memory access rights trap)
instead of:
Kernel Fault: Code=18 (Data memory protection/unaligned access trap)
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20181007205153.GA30270@ls3530.fritz.box>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do the cast to uintptr_t within the helper, so that the compiler
can type check the pointer argument. We can also do some more
sanity checking of the index argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since his inception in 61766fe9e2, this file uses the qemu_log()
API from "qemu/log.h". Include it to allow further includes
cleanup.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-9-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only MIPS requires snan_bit_is_one to be variable. While we are
specializing softfloat behaviour, allow other targets to eliminate
this runtime check.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now handled properly by the generic softfloat code.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While at it, use int for both num_insns and max_insns to make
sure we have same-type comparisons.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Drop TCGV_PTR_TO_NAT and TCGV_NAT_TO_PTR internal macros.
Add tcg_temp_local_new_ptr, tcg_gen_brcondi_ptr, tcg_gen_ext_i32_ptr,
tcg_gen_trunc_i64_ptr, tcg_gen_extu_ptr_i64, tcg_gen_trunc_ptr_i32.
Use inlines instead of macros where possible.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A recent glibc change relies on the fact that the iaoq must be 3,
and computes an address based on that. QEMU had been ignoring the
priv level for user-only, which produced an incorrect address.
Reported-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_init(cpu_model) were replaced by cpu_create(cpu_type) so
no users are left, remove it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-6-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
it will be used for providing to cpu name resolving class for
parsing cpu model for system and user emulation code.
Along with change add target to null-machine tests, so
that when switch to CPU_RESOLVING_TYPE happens,
it would ensure that null-machine usecase still works.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu> (m68k)
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc)
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore)
Message-Id: <1518000027-274608-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Added macro to riscv too]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Unify half a dozen copies of very similar code (the only difference being
whether comparisons were case-sensitive) and use it also in Tricore,
which did not do any sorting of CPU model names.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As cpu.h is another typically widely included file which doesn't need
full access to the softfloat API we can remove the includes from here
as well. Where they do need types it's typically for float_status and
the rounding modes so we move that to softfloat-types.h as well.
As a result of not having softfloat in every cpu.h call we now need to
add it to various helpers that do need the full softfloat.h
definitions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[For PPC parts]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
We masked the wrong bits, which prevented some of the
32-bit R registers. E.g. "fcnvxf,sgl,sgl fr22R,fr6R".
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is an extension to the base ISA, but we can use this in
the kernel idle loop to reduce the host cpu time consumed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
HP-UX 10.20 CD contains "add r0, r0, r27" in a delay slot,
which uses at least 5 temps.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unknown why this works, but if we return EXCP_ITLB_MISS we
will triple-fault the first userland instruction fetch.
Is it something to do with having a combined I/DTLB?
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Linux sets sr4-sr7 all to the same value, which means that we
need not do any runtime computation to find out what space to
use in forming the GVA.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Real hardware would use an external device to control the power.
But for the moment let's invent instructions in reserved space,
to be used by our custom firmware.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
However since HPPA has a software-managed TLB, and the relevant
TLB manipulation instructions are not implemented, this does not
actually do anything.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Any one TB will have only one space value. If we change spaces,
we change TBs. Thus BE and BEV must exit the TB immediately.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These instructions force the destination privilege level
of the branch destination to be no higher than current.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This changes the system virtual address width to 64-bit and
incorporates the space registers into load/store operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While the E bit is only used for pa2.0 mfctl,w from sar,
the otherwise reserved bit does not appear to be decoded.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most aspects of privilege are not yet handled. But this
gives us the start from which to begin checking.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For system mode, we will need 64-bit virtual addresses even when
we have 32-bit register sizes. Since the rest of QEMU equates
TARGET_LONG_BITS with the address size, redefine everything
related to register size in terms of a new TARGET_REGISTER_BITS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't actually do anything with most of the bits yet,
but at least they have names and we have somewhere to
store them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the addition of default-configs/hppa-softmmu.mak, this
will compile. It is not enabled with this patch, however.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
