Avoid tco-test making assumptions about the internal format of the address
tokens passed to PCI IO accessors, by using the new qpci_legacy_iomap()
function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The usual model for PCI IO with libqos is to use qpci_iomap() to map a
specific BAR for a PCI device, then perform IOs within that BAR using
qpci_io_{read,write}*().
However, certain devices also have legacy PCI IO. In this case, instead of
(or as well as) being accessed via PCI BARs, the device can be accessed
via certain well-known, fixed addresses in PCI IO space.
Two existing tests use legacy PCI IO, and take different flawed approaches
to it:
* tco-test manually constructs a tco_io_base value instead of calling
qpci_iomap(), which assumes internal knowledge of the structure of
the value it shouldn't have
* ide-test uses direct in*() and out*() calls instead of using
qpci_io_*() accessors, meaning it's not portable to non-x86 machine
types.
This patch implements a new qpci_iomap_legacy() interface which gets a
handle in the same format as qpci_iomap() but refers to a region in
the legacy PIO space. For a device which has the same registers
available both in a BAR and in legacy space (quite common), this
allows the same test code to test both options with just a different
iomap() at the beginning.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The PCI backends in libqos each supply an iomap() and iounmap() function
which is used to set up a specified PCI BAR. But PCI BAR allocation takes
place entirely within PCI space, so doesn't really need per-backend
versions. For example, Linux includes generic BAR allocation code used on
platforms where that isn't done by firmware.
This patch merges the BAR allocation from the two existing backends into a
single simplified copy. The back ends just need to set up some parameters
describing the window of PCI IO and PCI memory addresses which are
available for allocation. Like both the existing versions the new one uses
a simple bump allocator.
Note that (again like the existing versions) this doesn't really handle
64-bit memory BARs properly. It is actually used for such a BAR by the
ivshmem test, and apparently the 32-bit MMIO BAR logic is close enough to
work, as long as the BAR isn't too big. Fixing that to properly handle
64-bit BAR allocation is a problem for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The PCI IO space (aka PIO, aka legacy IO) and PCI memory space (aka MMIO)
are distinct address spaces by the PCI spec (although parts of one might be
aliased to parts of the other in some cases).
However, qpci_io_read*() and qpci_io_write*() can perform accesses to
either space depending on parameter. That's convenient for test case
drivers, since there are a fair few devices which can be controlled via
either a PIO or MMIO BAR but with an otherwise identical driver.
This is implemented by having addresses below 64kiB treated as PIO, and
those above treated as MMIO. This works because low addresses in memory
space are generally reserved for DMA rather than MMIO.
At the moment, this demultiplexing must be handled by each PCI backend
(pc and spapr, so far). There's no real reason for this - the current
encoding is likely to work for all platforms, and even if it doesn't we
can still use a more complex common encoding since the value returned from
iomap are semi-opaque.
This patch moves the demultiplexing into the common part of the libqos PCI
code, with the backends having simpler, separate accessors for PIO and
MMIO space. This also means we have a way of explicitly accessing either
space if it's necessary for some special case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
The 'addr' parameter to qvirtio_config_read*() doesn't have a consistent
meaning: when using the virtio-pci versions, it's a full PCI space address,
but for virtio-mmio, it's an offset from the device's base mmio address.
This means that the callers need to do different things to calculate the
addresses in the two cases, which rather defeats the purpose of function
pointer backends.
All the current users of these functions are using them to retrieve
variables from the device specific portion of the virtio config space.
So, this patch alters the semantics to always be an offset into that
device specific config area.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
ADB devices must take new handler into account only when they recognize it.
This lets operating systems probe for valid/invalid handles, to know device capabilities.
Add a FIXME in keyboard handler, which should use a different translation
table depending of the selected handler.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ibm,architecture-vec-5 is supposed to encode all option vector 5 bits
negotiated between platform/guest. Currently we hardcode this property
in the boot-time device tree to advertise a single negotiated
capability, "Form 1" NUMA Affinity, regardless of whether or not CAS
has been invoked or that capability has actually been negotiated.
Improve this by generating ibm,architecture-vec-5 based on the full
set of option vector 5 capabilities negotiated via CAS.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In some cases, ibm,client-architecture-support calls can fail. This
could happen in the current code for situations where the modified
device tree segment exceeds the buffer size provided by the guest
via the call parameters. In these cases, QEMU will reset, allowing
an opportunity to regenerate the device tree from scratch via
boot-time handling. There are potentially other scenarios as well,
not currently reachable in the current code, but possible in theory,
such as cases where device-tree properties or nodes need to be removed.
We currently don't handle either of these properly for option vector
capabilities however. Instead of carrying the negotiated capability
beyond the reset and creating the boot-time device tree accordingly,
we start from scratch, generating the same boot-time device tree as we
did prior to the CAS-generated and the same device tree updates as we
did before. This could (in theory) cause us to get stuck in a reset
loop. This hasn't been observed, but depending on the extensiveness
of CAS-induced device tree updates in the future, could eventually
become an issue.
Address this by pulling capability-related device tree
updates resulting from CAS calls into a common routine,
spapr_dt_cas_updates(), and adding an sPAPROptionVector*
parameter that allows us to test for newly-negotiated capabilities.
We invoke it as follows:
1) When ibm,client-architecture-support gets called, we
call spapr_dt_cas_updates() with the set of capabilities
added since the previous call to ibm,client-architecture-support.
For the initial boot, or a system reset generated by something
other than the CAS call itself, this set will consist of *all*
options supported both the platform and the guest. For calls
to ibm,client-architecture-support immediately after a CAS-induced
reset, we call spapr_dt_cas_updates() with only the set
of capabilities added since the previous call, since the other
capabilities will have already been addressed by the boot-time
device-tree this time around. In the unlikely event that
capabilities are *removed* since the previous CAS, we will
generate a CAS-induced reset. In the unlikely event that we
cannot fit the device-tree updates into the buffer provided
by the guest, well generate a CAS-induced reset.
2) When a CAS update results in the need to reset the machine and
include the updates in the boot-time device tree, we call the
spapr_dt_cas_updates() using the full set of negotiated
capabilities as part of the reset path. At initial boot, or after
a reset generated by something other than the CAS call itself,
this set will be empty, resulting in what should be the same
boot-time device-tree as we generated prior to this patch. For
CAS-induced reset, this routine will be called with the full set of
capabilities negotiated by the platform/guest in the previous
CAS call, which should result in CAS updates from previous call
being accounted for in the initial boot-time device tree.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Changed an int -> bool conversion to be more explicit]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently we access individual bytes of an option vector via
ldub_phys() to test for the presence of a particular capability
within that byte. Currently this is only done for the "dynamic
reconfiguration memory" capability bit. If that bit is present,
we pass a boolean value to spapr_h_cas_compose_response()
to generate a modified device tree segment with the additional
properties required to enable this functionality.
As more capability bits are added, will would need to modify the
code to add additional option vector accesses and extend the
param list for spapr_h_cas_compose_response() to include similar
boolean values for these parameters.
Avoid this by switching to spapr_ovec_* helpers so we can do all
the parsing in one shot and then test for these additional bits
within spapr_h_cas_compose_response() directly.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PAPR guests advertise their capabilities to the platform by passing
an ibm,architecture-vec structure via an
ibm,client-architecture-support hcall as described by LoPAPR v11,
B.6.2.3. during early boot.
Using this information, the platform enables the capabilities it
supports, then encodes a subset of those enabled capabilities (the
5th option vector of the ibm,architecture-vec structure passed to
ibm,client-architecture-support) into the guest device tree via
"/chosen/ibm,architecture-vec-5".
The logical format of these these option vectors is a bit-vector,
where individual bits are addressed/documented based on the byte-wise
offset from the beginning of the bit-vector, followed by the bit-wise
index starting from the byte-wise offset. Thus the bits of each of
these bytes are stored in reverse order. Additionally, the first
byte of each option vector is encodes the length of the option vector,
so byte offsets begin at 1, and bit offset at 0.
This is not very intuitive for the purposes of mapping these bits to
a particular documented capability, so this patch introduces a set
of abstractions that encapsulate the work of parsing/encoding these
options vectors and testing for individual capabilities.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[dwg: Tweaked double-include protection to not trigger a checkpatch
false positive]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For historical reasons construction of the guest device tree in spapr is
divided between spapr_create_fdt_skel() which is called at init time, and
spapr_build_fdt() which runs at reset time. Over time, more and more
things have needed to be moved to reset time.
Previous cleanups mean the only things left in spapr_create_fdt_skel() are
the properties of the root node itself. Finish consolidating these two
parts of device tree construction, by moving this to the start of
spapr_build_fdt(), and removing spapr_create_fdt_skel() entirely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Construction of the /vdevice node (and its children) is divided between
spapr_create_fdt_skel() (at init time), which creates the base node, and
spapr_populate_vdevice() (at reset time) which creates the nodes for each
individual virtual device.
This consolidates both into a single function called from
spapr_build_fdt().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently the /hypervisor device tree node is constructed in
spapr_create_fdt_skel(). As part of consolidating device tree construction
to reset time, move it to a function called from spapr_build_fdt().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The /event-sources device tree node is built from spapr_create_fdt_skel().
As part of consolidating device tree construction to reset time, this moves
it to spapr_build_fdt().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For historical reasons construction of the /rtas node in the device
tree (amongst others) is split into several places. In particular
it's split between spapr_create_fdt_skel(), spapr_build_fdt() and
spapr_rtas_device_tree_setup().
In fact, as well as adding the actual RTAS tokens to the device tree,
spapr_rtas_device_tree_setup() just adds the ibm,lrdr-capacity
property, which despite going in the /rtas node, doesn't have a lot to
do with RTAS.
This patch consolidates the code constructing /rtas together into a new
spapr_dt_rtas() function. spapr_rtas_device_tree_setup() is renamed to
spapr_dt_rtas_tokens() and now only adds the token properties.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For historical reasons, building the /chosen node in the guest device tree
is split across several places and includes both parts which write the DT
sequentially and others which use random access functions.
This patch consolidates construction of the node into one place, using
random access functions throughout.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently the device tree node for the XICS interrupt controller is in
spapr_create_fdt_skel(). As part of consolidating device tree construction
to reset time, this moves it to a function called from spapr_build_fdt().
In addition we move the actual code into hw/intc/xics_spapr.c with the
rest of the PAPR specific interrupt controller code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
At each system reset, the pseries machine needs to load RTAS (the runtime
portion of the guest firmware) into the VM. This means copying
the actual RTAS code into guest memory, and also updating the device
tree so that the guest OS and boot firmware can locate it.
For historical reasons the copy and update to the device tree were in
different parts of the code. This cleanup brings them both together in
an spapr_load_rtas() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The flattened device tree passed to pseries guests contains a list of
reserved memory areas. Currently we construct this list early in
spapr_create_fdt_skel() as we sequentially write the fdt.
This will be inconvenient for upcoming cleanups, so this patch moves
the reserve map changes to the end of fdt construction. This changes
fdt_add_reservemap_entry() calls - which work when writing the fdt
sequentially to fdt_add_mem_rsv() calls used when altering the fdt in
random access mode.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently spapr_create_fdt_skel() takes a bunch of individual parameters
for various things it will put in the device tree. Some of these can
already be taken directly from sPAPRMachineState. This patch alters it so
that all of them can be taken from there, which will allow this code to
be moved away from its current caller in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These values are used only within ppc_spapr_reset(), so just change them
to local variables.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
spapr_finalize_fdt() both finishes building the device tree for the guest
and loads it into guest memory. For future cleanups, it's going to be
more convenient to do these two things separately. The loading portion is
pretty trivial, so we move it inline into the caller, ppc_spapr_reset().
We also rename spapr_finalize_fdt(), because the current name is going to
become inaccurate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
As Qemu only supports a single instance of the ISA bus, we use the LPC
controller of chip 0 to create one and plug in a couple of useful
devices, like an UART and RTC. An IPMI BT device, which is also an ISA
device, can be defined on the command line to connect an external BMC.
That is for later.
The PowerNV machine now has a console. Skiboot should load a kernel
and jump into it but execution will stop quite early because we lack a
model for the native XICS controller for the moment :
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] XICS: Cannot find a Presentation Controller !
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/powerpc/platforms/powernv/setup.c:81
...
[ 0.000000] NIP [c00000000079d65c] pnv_init_IRQ+0x30/0x44
You can still do a few things under xmon.
Based on previous work from :
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Trivial fix for a change in the serial_hds_isa_init() interface]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The LPC (Low Pin Count) interface on a POWER8 is made accessible to
the system through the ADU (XSCOM interface). This interface is part
of set of units connected together via a local OPB (On-Chip Peripheral
Bus) which act as a bridge between the ADU and the off chip LPC
endpoints, like external flash modules.
The most important units of this OPB are :
- OPB Master: contains the ADU slave logic, a set of internal
registers and the logic to control the OPB.
- LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of
internal registers and the LPC HOST Controller to control the LPC
interface.
Four address spaces are provided to the ADU :
- LPC Bus Firmware Memory
- LPC Bus Memory
- LPC Bus I/O (ISA bus)
- and the registers for the OPB Master and the LPC Host Controller
On POWER8, an intermediate hop is necessary to reach the OPB, through
a unit called the ECCB. OPB commands are simply mangled in ECCB write
commands.
On POWER9, the OPB master address space can be accessed via MMIO. The
logic is same but the code will be simpler as the XSCOM and ECCB hops
are not necessary anymore.
This version of the LPC controller model doesn't yet implement support
for the SerIRQ deserializer present in the Naples version of the chip
though some preliminary work is there.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
- ported on latest PowerNV patchset
- changed the XSCOM interface to fit new model
- QOMified the model
- moved the ISA hunks in another patch
- removed printf logging
- added a couple of UNIMP logging
- rewrote commit log ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we are using real HW ids for the cores in PowerNV chips, we
can route the XSCOM accesses to them. We just need to attach a
specific XSCOM memory region to each core in the appropriate window
for the core number.
To start with, let's install the DTS (Digital Thermal Sensor) handlers
which should return 38°C for each core.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On a real POWER8 system, the Pervasive Interconnect Bus (PIB) serves
as a backbone to connect different units of the system. The host
firmware connects to the PIB through a bridge unit, the
Alter-Display-Unit (ADU), which gives him access to all the chiplets
on the PCB network (Pervasive Connect Bus), the PIB acting as the root
of this network.
XSCOM (serial communication) is the interface to the sideband bus
provided by the POWER8 pervasive unit to read and write to chiplets
resources. This is needed by the host firmware, OPAL and to a lesser
extent, Linux. This is among others how the PCI Host bridges get
configured at boot or how the LPC bus is accessed.
To represent the ADU of a real system, we introduce a specific
AddressSpace to dispatch XSCOM accesses to the targeted chiplets. The
translation of an XSCOM address into a PCB register address is
slightly different between the P9 and the P8. This is handled before
the dispatch using a 8byte alignment for all.
To customize the device tree, a QOM InterfaceClass, PnvXScomInterface,
is provided with a populate() handler. The chip populates the device
tree by simply looping on its children. Therefore, each model needing
custom nodes should not forget to declare itself as a child at
instantiation time.
Based on previous work done by :
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Added cpu parameter to xscom_complete()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is largy inspired by sPAPRCPUCore with some simplification, no
hotplug for instance. A set of PnvCore objects is added to the PnvChip
and the device tree is populated looping on these cores.
Real HW cpu ids are now generated depending on the chip cpu model, the
chip id and a core mask. The id is propagated to the CPU object, using
properties, to set the SPR_PIR (Processor Identification Register)
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The Processor Identification Register (PIR) is a register that holds a
processor identifier which is used for bus transactions (XSCOM) and
for processor differentiation in multiprocessor systems. It also used
in the interrupt vector entries (IVE) to identify the thread serving
the interrupts.
P9 and P8 have some differences in the CPU PIR encoding.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This will be used to build real HW ids for the cores and enforce some
limits on the available cores per chip.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is is an abstraction of a POWER8 chip which is a set of cores
plus other 'units', like the pervasive unit, the interrupt controller,
the memory controller, the on-chip microcontroller, etc. The whole can
be seen as a socket. It depends on a cpu model and its characteristics:
max cores and specific inits are defined in a PnvChipClass.
We start with an near empty PnvChip with only a few cpu constants
which we will grow in the subsequent patches with the controllers
required to run the system.
The Chip CFAM (Common FRU Access Module) ID gives the model of the
chip and its version number. It is generally the first thing firmwares
fetch, available at XSCOM PCB address 0xf000f, to start initialization.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The goal is to emulate a PowerNV system at the level of the skiboot
firmware, which loads the OS and provides some runtime services. Power
Systems have a lower firmware (HostBoot) that does low level system
initialization, like DRAM training. This is beyond the scope of what
qemu will address in a PowerNV guest.
No devices yet, not even an interrupt controller. Just to get started,
some RAM to load the skiboot firmware, the kernel and initrd. The
device tree is fully created in the machine reset op.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: - updated for qemu-2.7
- replaced fprintf by error_report
- used a common definition of _FDT macro
- removed VMStateDescription as migration is not yet supported
- added IBM Copyright statements
- reworked kernel_filename handling
- merged PnvSystem and sPowerNVMachineState
- removed PHANDLE_XICP
- added ppc_create_page_sizes_prop helper
- removed nmi support
- removed kvm support
- updated powernv machine to version 2.8
- removed chips and cpus, They will be provided in another patches
- added a machine reset routine to initialize the device tree (also)
- french has a squelette and english a skeleton.
- improved commit log.
- reworked prototypes parameters
- added a check on the ram size (thanks to Michael Ellerman)
- fixed chip-id cell
- changed MAX_CPUS to 2048
- simplified memory node creation to one node only
- removed machine version
- rewrote the device tree creation with the fdt "rw" routines
- s/sPowerNVMachineState/PnvMachineState/
- etc.]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When configured to compile out of tree, the configure script
copies BIOS blobs to the build directory. However since the PPC64 powernv
machine ROM has .lid extension, it is ignored and "make check" fails
when trying the powernv machine.
This adds *.lid to the list of copied blobs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is the initial image of skiboot 5.3.7 (commit 762d0082) for
the PowerPC PowerNV (Non-Virtualized) platform. Built from
submodule.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The original QOMification of the spapr VIO devices in 3954d33 "spapr:
convert to QEMU Object Model (v2)" moved some callbacks from the
VIOsPAPRBus structure to the VIOsPAPRDeviceClass. Except, that it
forgot to actually remove them from the VIOsPAPRBus structure (which
still exists, though it doesn't fulfill quite the same function as it
did pre-QOM).
This patch removes those now unused callback fields.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Power ISA specifies ME bit handling for system reset interrupt:
if the interrupt occurred while the thread was in power-saving
mode, set to 1; otherwise not altered
Power ISA 3.0, section 6.5 "Interrupt Definitions", Figure 64.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The routines :
void icp_set_cppr(ICPState *icp, uint8_t cppr);
void icp_set_mfrr(ICPState *icp, uint8_t mfrr);
void icp_eoi(ICPState *icp, uint32_t xirr);
now use one 'ICPState *icp' argument instead of a 'XICSState *' and a
server arguments. The backlink on XICSState* is used whenever needed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The link will be used to change the API of the icp_* routines which
are still using an XICSState as an argument.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xics_spapr and xics_kvm nearly define the same 'set_nr_servers'
handler. Only the type of the ICP differs. So let's make a common one
to remove some duplicated code.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The header now only contains inline functions related to the
Sun NVRAM, so the a name like sun_nvram.h seems to be more
appropriate now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Everything that is related to CHRP NVRAM should rather reside in
chrp_nvram.c / chrp_nvram.h instead of openbios_firmware_abi.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The system and free space NVRAM partitions (for OpenBIOS) are created
in exactly the same way as the Mac-style CHRP NVRAM partitions, so we
can use the new common helper functions to do this job here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "system partition" and "free space" partition layouts are
defined by the CHRP and LoPAPR specification, and used by
OpenBIOS and SLOF. We can re-use this code for other machines
that use OpenBIOS and SLOF, too. So let's make this code independent
from the MAC NVRAM environment and put it into two proper helper
functions.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With the addition of "numa_node" properties for PHBs we began
advertising NUMA affinity in cases where nb_numa_nodes > 1.
Since the default on the guest side is to make no assumptions about
PHB NUMA affinity (defaulting to -1), there is still a valid use-case
for explicitly defining a PHB's NUMA affinity even when there's just
one node. In particular, some workloads make faulty assumptions about
/sys/bus/pci/<devid>/numa_node being >= 0, warranting the use of
this property as a workaround even if there's just 1 PHB or NUMA
node.
Enable this use-case by always advertising the PHB's NUMA affinity
if "numa_node" has been explicitly set.
We could achieve this by relaxing the check to simply be
nb_numa_nodes > 0, but even safer would be to check
numa_info[nodeid].present explicitly, and to fail at start time
for cases where it does not exist.
This has an additional affect of no longer advertising PHB NUMA
affinity unconditionally if nb_numa_nodes > 1 and "numa_node"
property is unset/-1, but since the default value on the guest
side for each PHB is also -1, the behavior should be the same for
that situation. We could still retain the old behavior if desired,
but the decision seems arbitrary, so we take the simpler route.
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Shivaprasad G. Bhat <shivapbh@in.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
but disable MSI-X tests on SPAPR as we can't check the result
(the memory region used on PC is not readable on SPAPR).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch replaces calls to qtest_start() and qtest_end() by
calls to qtest_pc_boot() and qtest_shutdown().
This allows to initialize memory allocator and PCI interface
functions. This will ease to enable virtio tests on other
architectures by only adding a specific qtest_XXX_boot() (like
qtest_spapr_boot()).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the definition to libqos/virtio.h as it must be used
only with virtio functions.
Add a QVirtioDevice parameter as it will be needed to
know if the virtio device is using virtio 1.0 specification
and thus is always little-endian (to do)
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
