The reset and poweroff features of the syscon were originally added to
top level, which is a valid path for a syscon subnode. Subsequently a
reorganisation was carried out while implementing NUMA in which the
subnodes were moved into the /soc node. As /soc is a "simple-bus", this
path is invalid, and so dt-validate produces the following warnings:
/stuff/qemu/qemu.dtb: soc: poweroff: {'value': [[21845]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-poweroff']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
/stuff/qemu/qemu.dtb: soc: reboot: {'value': [[30583]], 'offset': [[0]], 'regmap': [[4]], 'compatible': ['syscon-reboot']} should not be valid under {'type': 'object'}
From schema: /home/conor/.local/lib/python3.9/site-packages/dtschema/schemas/simple-bus.yaml
Move the syscon subnodes back to the top level and silence the warnings.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220810184612.157317-4-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 18df0b4695 ("hw/riscv: virt: Allow creating multiple NUMA sockets")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When optional AIA PLIC support was added the to the virt machine, the
address cells property was removed leading the issues with dt-validate
on a dump from the virt machine:
/stuff/qemu/qemu.dtb: plic@c000000: '#address-cells' is a required property
From schema: /stuff/linux/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
Add back the property to suppress the warning.
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-3-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: e6faee6585 ("hw/riscv: virt: Add optional AIA APLIC support to virt machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"uart" is not a node name that complies with the dt-schema.
Change the node name to "serial" to ix warnings seen during
dt-validate on a dtbdump of the virt machine such as:
/stuff/qemu/qemu.dtb: uart@10000000: $nodename:0: 'uart@10000000' does not match '^serial(@.*)?$'
From schema: /stuff/linux/Documentation/devicetree/bindings/serial/8250.yaml
Reported-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Message-id: 20220810184612.157317-2-mail@conchuod.ie
Link: https://lore.kernel.org/linux-riscv/20220803170552.GA2250266-robh@kernel.org/
Fixes: 04331d0b56 ("RISC-V VirtIO Machine")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Booting using "Direct Kernel Boot" for PolarFire SoC & skipping u-boot
entirely is probably not advisable, but it does at least show signs of
life. Recent Linux kernel versions make use of peripherals that are
missing definitions in QEMU and lead to kernel panics. These issues
almost certain rear their head for other methods of booting, but I was
unable to figure out a suitable HSS version that is recent enough to
support these peripherals & works with QEMU.
With these peripherals added, booting a kernel with the following hangs
hangs waiting for the system controller's hwrng, but the kernel no
longer panics. With the Linux driver for hwrng disabled, it boots to
console.
qemu-system-riscv64 -M microchip-icicle-kit \
-m 2G -smp 5 \
-kernel $(vmlinux_bin) \
-dtb $(dtb)\
-initrd $(initramfs) \
-display none -serial null \
-serial stdio
More peripherals are added than strictly required to fix the panics in
the hopes of avoiding a replication of this problem in the future.
Some of the peripherals which are in the device tree for recent kernels
are implemented in the FPGA fabric. The eMMC/SD mux, which exists as
an unimplemented device is replaced by a wider entry. This updated
entry covers both the mux & the remainder of the FPGA fabric connected
to the MSS using Fabric Interrconnect (FIC) 3.
Link: https://github.com/polarfire-soc/icicle-kit-reference-design#fabric-memory-map
Link: https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/SupportingCollateral/V1_4_Register_Map.zip
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220813135127.2971754-1-mail@conchuod.ie>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following patch updates opentitan to match the new configuration,
as per, lowRISC/opentitan@217a0168ba
Note: with this patch we now skip the usage of the opentitan
`boot_rom`. The Opentitan boot rom contains hw verification
for devies which we are currently not supporting in qemu. As of now,
the `boot_rom` has no major significance, however, would be good to
support in the future.
Tested by running utests from the latest tock [1]
(that supports this version of OT).
[1] https://github.com/tock/tock/pull/3056
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220812005229.358850-1-wilfred.mallawa@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Normally, riscv_csrrw_check is called when executing Zicsr instructions.
And we can only do access control for existed CSRs. So the priority of
CSR related check, from highest to lowest, should be as follows:
1) check whether Zicsr is supported: raise RISCV_EXCP_ILLEGAL_INST if not
2) check whether csr is existed: raise RISCV_EXCP_ILLEGAL_INST if not
3) do access control: raise RISCV_EXCP_ILLEGAL_INST or RISCV_EXCP_VIRT_
INSTRUCTION_FAULT if not allowed
The predicates contain parts of function of both 2) and 3), So they need
to be placed in the middle of riscv_csrrw_check
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220803123652.3700-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'fdt' param is not being used in riscv_setup_rom_reset_vec().
Simplify the API by removing it. While we're at it, remove the redundant
'return' statement at the end of function.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Vijai Kumar K <vijai@behindbytes.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220728181926.2123771-1-danielhb413@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added support for RISC-V PAUSE instruction from Zihintpause extension,
enabled by default.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Dao Lu <daolu@rivosinc.com>
Message-Id: <20220725034728.2620750-2-daolu@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to v-spec, mask agnostic behavior can be either kept as
undisturbed or set elements' bits to all 1s. To distinguish the
difference of mask policies, QEMU should be able to simulate the mask
agnostic behavior as "set mask elements' bits to all 1s".
There are multiple possibility for agnostic elements according to
v-spec. The main intent of this patch-set tries to add option that
can distinguish between mask policies. Setting agnostic elements to
all 1s allows QEMU to express this.
This commit adds option 'rvv_ma_all_1s' is added to enable the
behavior, it is default as disabled.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165570784143.17634.35095816584573691-10@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to v-spec, mask agnostic behavior can be either kept as
undisturbed or set elements' bits to all 1s. To distinguish the
difference of mask policies, QEMU should be able to simulate the mask
agnostic behavior as "set mask elements' bits to all 1s".
There are multiple possibility for agnostic elements according to
v-spec. The main intent of this patch-set tries to add option that
can distinguish between mask policies. Setting agnostic elements to
all 1s allows QEMU to express this.
This is the first commit regarding the optional mask agnostic
behavior. Follow-up commits will add this optional behavior
for all rvv instructions.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165570784143.17634.35095816584573691-1@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit fbf43c7dbf ("target/riscv: enable riscv kvm accel"),
KVM accelerator is supported on RISC-V. Let's document it.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220719082635.3741878-1-bin.meng@windriver.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upgrade OpenSBI from v1.0 to v1.1 and the pre-built bios images.
The v1.1 release includes the following commits:
5b99603 lib: utils/ipi: Fix size check in aclint_mswi_cold_init()
6dde435 lib: utils/sys: Extend HTIF library to allow custom base address
8257262 platform: sifive_fu740: do not use a global in da9063_reset/shutdown
fb688d9 platform: sifive_fu740: fix reset when watchdog is running
5d025eb lib: fix pointer of type 'void *' used in arithmetic
632f593 lib: sbi: Map only the counters enabled in hardware
3b7c204 lib: sbi: Disable interrupt during config matching
a26dc60 lib: sbi: Disable interrupt and inhibit counting in M-mode during init
5d53b55 Makefile: fix build with binutils 2.38
6ad8917 lib: fix compilation when strings.h is included
ce4c018 lib: utils/serial: Round UART8250 baud rate divisor to nearest integer
01250d0 include: sbi: Add AIA related CSR defines
8f96070 lib: sbi: Detect AIA CSRs at boot-time
65b4c7c lib: sbi: Use AIA CSRs for local interrupts when available
222132f lib: sbi: Add sbi_trap_set_external_irqfn() API
5f56314 lib: utils/irqchip: Allow multiple FDT irqchip drivers
1050940 include: sbi: Introduce nascent_init() platform callback
55e79f8 lib: sbi: Enable mie.MEIE bit for IPIs based on external interrupts.
9f73669 lib: utils/irqchip: Add IMSIC library
811da5c lib: utils/irqchip: Add FDT based driver for IMSIC
7127aaa lib: utils: Disable appropriate IMSIC DT nodes in fdt_fixups()
9979265 lib: utils/irqchip: Add APLIC initialization library
3461219 lib: utils/irqchip: Add FDT based driver for APLIC
8e2ef4f lib: utils: Disable appropriate APLIC DT nodes in fdt_fixups()
3a69cc1 lib: sbi: fix typo in is_region_subset
f2ccf2f lib: sbi: verbose sbi_domain_root_add_memregion
f3f4604 lib: sbi: Add a simple external interrupt handling framework
4998a71 lib: utils: serial: Initial commit of xlnx-uartlite
2dfbd3c lib: pmp_set/pmp_get moved errors from runtime to compile time
b6b7220 firmware: Fix code for accessing hart_count and stack_size
d552fc8 lib: Add error messages via conditional compilation for the future
555bdb1 include: Use static asserts for SBI_PLATFORM_xxx_OFFSET defines
1b42d3a include: Use static asserts for SBI_SCRATCH_xxx_OFFSET defines
7924a0b include: Use static asserts for FW_DYNAMIC_INFO_xxx_OFFSET defines
722f80d include: Add defines for [m|h|s]envcfg CSRs
31fecad lib: sbi: Detect menvcfg CSR at boot time
47d6765 lib: sbi: Enable Zicbo[m|z] extensions in the menvcfg CSR
794986f lib: sbi: Enable Svpbmt extension in the menvcfg CSR
499601a lib: sbi: Add Smstateen extension defines
d44568a lib: sbi: Detect Smstateen CSRs at boot-time
3383d6a lib: irqchip/imsic: configure mstateen
5c5cbb5 lib: utils/serial: support 'reg-offset' property
c1e47d0 include: correct the definition of MSTATUS_VS
9cd95e1 lib: sbi/hart: preserve csr validation value
4035ae9 docs: pmu: Improve the PMU DT bindings
d62f6da lib: sbi: Implement Sstc extension
474a9d4 lib: sbi: Fix mstatus_init() for RV32 when Sscofpmf is not available
e576b3e include: sbi: Define SBI_PMU_HW_EVENT_MAX to 256
b0c9df5 lib: sbi: Fix mhpmeventh access for rv32 in absence of sscofpmf
1a754bb lib: sbi: Detect and print privileged spec version
5a6be99 lib: sbi: Remove 's' and 'u' from misa_string() output
5b8b377 lib: sbi: Update the name of ISA string printed at boot time
d4b563c lib: sbi: Remove MCOUNTEREN and SCOUNTEREN hart features
dbc3d8f lib: sbi: Remove MCOUNTINHIBT hart feature
97a17c2 lib: sbi: Remove MENVCFG hart feature
a6ab94f lib: sbi: Fix AIA feature detection
cad6c91 lib: sbi: Convert hart features into hart extensions
be4903a lib: sbi: Detect hart features only once for each hart
994ace3 lib: sbi: Add sbi_hart_update_extension() function
023f0ad lib: sbi_platform: Add callback to populate HART extensions
f726f2d Makefile: Allow generated C source to be anywhere in build directory
7fb474b Makefile: Add support for generating C array at compile time
73cf511 lib: utils/reset: Generate FDT reset driver list at compile-time
1e62705 lib: utils/serial: Generate FDT serial driver list at compile-time
bfeb305 lib: utils/timer: Generate FDT timer driver list at compile-time
3a69d12 lib: utils/irqchip: Generate FDT irqchip driver list at compile-time
4ee0c57 lib: utils/ipi: Generate FDT ipi driver list at compile-time
998ed43 lib: utils/i2c: Generate FDT i2c adapter driver list at compile-time
4eacd82 lib: utils/gpio: Generate FDT gpio driver list at compile-time
a3a3c60 platform: generic: Generate platform override module list at compile-time
9a7a677 platform: generic: Move Sifive platform overrides into own directory
851c14d lib: utils/irqchip: fix typo when checking for CPU node
90a9dd2 lib: utils/fdt: introduce fdt_node_is_enabled()
616da52 lib: utils: check if CPU node is enabled
575bb4e platform: generic: check if CPU node is enabled
1bc67db lib: utils/fdt: rename fdt_parse_max_hart_id
f067bb8 lib: sbi: fix system_opcode_insn
fab0379 lib: utils/fdt: Require match data to be const
295e5f3 lib: sbi_timer: Drop unnecessary get_platform_ticks wrapper
ff65bfe lib: sbi_illegal_insn: Constify illegal_insn_table
cb8271c lib: sbi_illegal_insn: Add emulation for fence.tso
adc3388 lib: sbi_trap: Redirect exception based on hedeleg
ce1d618 platform: generic: add overrides for vendor extensions
b20ed9f lib: sbi_hsm: Call a device hook during hart resume
79e42eb lib: sbi_hsm: Assume a consistent resume address
2ea7799 lib: irqchip/plic: Constify plic_data pointers
8c362e7 lib: irqchip/plic: Factor out a context init function
415ecf2 lib: irqchip/plic: Add context save/restore helpers
2b79b69 lib: irqchip/plic: Add priority save/restore helpers
69be3df lib: utils/irqchip: Add FDT wrappers for PLIC save/restore functions
5e56758 lib: utils/irqchip: Add wrapper for T-HEAD PLIC delegation
9dc5ec5 platform: Add HSM implementation for Allwinner D1
551c70c include: sbi: Add mtinst/htinst psuedoinstructions
187127f lib: sbi: Fixup tinst for exceptions in sbi_misaligned_*()
a07402a lib: sbi: Fix tval and tinst for sbi_get_insn()
c653001 lib: utils: Remove CSRs that set/clear an IMSIC interrupt file bits
7738345 lib: utils/timer: Add a separate compatible for the D1 CLINT
d76a196 lib: irqchip/plic: fix typo in plic_warm_irqchip_init
6f1fe98 lib: utils/timer: Remove Allwinner D1 CLINT compatibles
c6fdbcf include: sbi: Change spec version to 1.0
3f66465 lib: pmu: allow to use the highest available counter
4489876 include: Bump-up version to 1.1
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220713090613.204046-1-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Just add 1 to the effective privledge level when in HS mode, then reuse
the check of 'effective_priv < csr_priv' in riscv_csrrw_check to replace
the privilege level related check in hmode. Then, hmode will only check
whether H extension is supported.
When accessing Hypervior CSRs:
1) If accessing from M privilege level, the check of
'effective_priv< csr_priv' passes, returns hmode(...) which will return
RISCV_EXCP_ILLEGAL_INST when H extension is not supported and return
RISCV_EXCP_NONE otherwise.
2) If accessing from HS privilege level, effective_priv will add 1,
the check passes and also returns hmode(...) too.
3) If accessing from VS/VU privilege level, the check fails, and
returns RISCV_EXCP_VIRT_INSTRUCTION_FAULT
4) If accessing from U privilege level, the check fails, and returns
RISCV_EXCP_ILLEGAL_INST
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add check for the implicit dependence between H and S
Csrs only existed in RV32 will not trigger virtual instruction fault
when not in RV32 based on section 8.6.1 of riscv-privileged spec
(draft-20220717)
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220718130955.11899-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add umode/umode32 predicate for mcounteren, menvcfg/menvcfgh
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix the lines with over 80 characters
Fix the lines which are obviously misalgined with other lines in the
same group
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add check for "H depends on an I base integer ISA with 32 x registers"
which is stated at the beginning of chapter 8 of the riscv-privileged
spec(draft-20220717)
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are 3 suggested privilege mode combinations listed in section 1.2
of the riscv-privileged spec(draft-20220717):
1) M, 2) M, U 3) M, S, U
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20220718130955.11899-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This is confirmed to successfully initialize the
RNG on Linux 5.19-rc2.
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220613115810.178210-1-Jason@zx2c4.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- Zmmul is ratified and is now version 1.0
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220710101546.3907-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For rv128c shifts, a shamt of 0 is a shamt of 64, while for rv32c/rv64c
it stays 0 and is a hint instruction that does not change processor state.
For rv128c right shifts, the 6-bit shamt is in addition sign extended to
7 bits.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220710110451.245567-1-frederic.petrot@univ-grenoble-alpes.fr>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should disable extensions in riscv_cpu_realize() if minimum required
priv spec version is not satisfied. This also ensures that machines with
priv spec v1.11 (or lower) cannot enable H, V, and various multi-letter
extensions.
Fixes: a775398be2 ("target/riscv: Add isa extenstion strings to the device tree")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Message-Id: <20220630061150.905174-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should write transformed instruction encoding of the trapped
instruction in [m|h]tinst CSR at time of taking trap as defined
by the RISC-V privileged specification v1.12.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: dramforever <dramforever@live.com>
Message-Id: <20220630061150.905174-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix s390x, i386 and riscv for translations crossing a page.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmMW8TcdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8qfwf9EYjXywES/UYzfeJC
7irryE3iYddWP+ix3Q4WKaTc61plwP5MMCmeq4PjRo1IBAL5dTtUE1+AFXkEvm4L
EckSiT5D5d/wYOfhWSWxjblmMk7GUXRRgKzkF1ir3soIftQgXdb43PwAswuOca/v
dX7wXBJOoWmGWqXNNlQmGIl7c4uQTkOM6iTTLlm4Qg7SJC4MA6EiSZmXlvAs80lN
TCbBV5P89qseHwzhJUTMZEO+ZMAuTSjFSd/RqBexVa4ty5UJxxgBk21A8JtQPUhr
Y/Ezb0yhOcwrdjJ8REc267BZbdNgbaVNlUd7c9GKbv8bQUh0AoM9gnjGdoID88x9
q0f+Pw==
=HmJB
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20220906' of https://gitlab.com/rth7680/qemu into staging
Respect PROT_EXEC in user-only mode.
Fix s390x, i386 and riscv for translations crossing a page.
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmMW8TcdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8qfwf9EYjXywES/UYzfeJC
# 7irryE3iYddWP+ix3Q4WKaTc61plwP5MMCmeq4PjRo1IBAL5dTtUE1+AFXkEvm4L
# EckSiT5D5d/wYOfhWSWxjblmMk7GUXRRgKzkF1ir3soIftQgXdb43PwAswuOca/v
# dX7wXBJOoWmGWqXNNlQmGIl7c4uQTkOM6iTTLlm4Qg7SJC4MA6EiSZmXlvAs80lN
# TCbBV5P89qseHwzhJUTMZEO+ZMAuTSjFSd/RqBexVa4ty5UJxxgBk21A8JtQPUhr
# Y/Ezb0yhOcwrdjJ8REc267BZbdNgbaVNlUd7c9GKbv8bQUh0AoM9gnjGdoID88x9
# q0f+Pw==
# =HmJB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 06 Sep 2022 03:05:27 EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20220906' of https://gitlab.com/rth7680/qemu:
target/riscv: Make translator stop before the end of a page
target/riscv: Add MAX_INSN_LEN and insn_len
target/i386: Make translator stop before the end of a page
target/s390x: Make translator stop before the end of a page
accel/tcg: Add fast path for translator_ld*
accel/tcg: Add pc and host_pc params to gen_intermediate_code
accel/tcg: Remove translator_ldsw
accel/tcg: Document the faulting lookup in tb_lookup_cmp
accel/tcg: Use probe_access_internal for softmmu get_page_addr_code_hostp
accel/tcg: Move qemu_ram_addr_from_host_nofail to physmem.c
accel/tcg: Make tb_htable_lookup static
accel/tcg: Unlock mmap_lock after longjmp
accel/tcg: Properly implement get_page_addr_code for user-only
accel/tcg: Introduce is_same_page()
tests/tcg/i386: Move smc_code2 to an executable section
linux-user: Clear translations on mprotect()
linux-user: Honor PT_GNU_STACK
linux-user/x86_64: Allocate vsyscall page as a commpage
linux-user/hppa: Allocate page zero as a commpage
linux-user/arm: Mark the commpage executable
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Right now the translator stops right *after* the end of a page, which
breaks reporting of fault locations when the last instruction of a
multi-insn translation block crosses a page boundary.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1155
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These will be useful in properly ending the TB.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Right now translator stops right *after* the end of a page, which
breaks reporting of fault locations when the last instruction of a
multi-insn translation block crosses a page boundary.
An implementation, like the one arm and s390x have, would require an
i386 length disassembler, which is burdensome to maintain. Another
alternative would be to single-step at the end of a guest page, but
this may come with a performance impact.
Fix by snapshotting disassembly state and restoring it after we figure
out we crossed a page boundary. This includes rolling back cc_op
updates and emitted ops.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1143
Message-Id: <20220817150506.592862-4-iii@linux.ibm.com>
[rth: Simplify end-of-insn cross-page checks.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Right now translator stops right *after* the end of a page, which
breaks reporting of fault locations when the last instruction of a
multi-insn translation block crosses a page boundary.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220817150506.592862-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cache the translation from guest to host address, so we may
use direct loads when we hit on the primary translation page.
Look up the second translation page only once, during translation.
This obviates another lookup of the second page within tb_gen_code
after translation.
Fixes a bug in that plugin_insn_append should be passed the bytes
in the original memory order, not bswapped by pieces.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only user can easily use translator_lduw and
adjust the type to signed during the return.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It was non-obvious to me why we can raise an exception in
the middle of a comparison function, but it works.
While nearby, use TARGET_PAGE_ALIGN instead of open-coding.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the implementation of get_page_addr_code_hostp
by reusing the existing probe_access infrastructure.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The base qemu_ram_addr_from_host function is already in
softmmu/physmem.c; move the nofail version to be adjacent.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is not used outside of cpu-exec.c. Move it and
its subroutines up in the file, before the first use.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The mmap_lock is held around tb_gen_code. While the comment
is correct that the lock is dropped when tb_gen_code runs out
of memory, the lock is *not* dropped when an exception is
raised reading code for translation.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current implementation is a no-op, simply returning addr.
This is incorrect, because we ought to be checking the page
permissions for execution.
Make get_page_addr_code inline for both implementations.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a function that checks whether a given address is on the same
page as where disassembly started. Having it improves readability of
the following patches.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220811095534.241224-3-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[rth: Make the DisasContextBase parameter const.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We're about to start validating PAGE_EXEC, which means
that we've got to put this code into a section that is
both writable and executable.
Note that this test did not run on hardware beforehand either.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
