* target-arm: kvm: use AddressSpace-specific listener
* aspeed: add SMC controllers
* hw/arm/boot: allow using a command line specified dtb without a kernel
* hw/dma/pl080: Fix bad bit mask
* hw/intc/arm_gic_kvm: Fix build on aarch64 with some compilers
* hw/arm/virt: fix ACPI tables for ITS
* tests: add a m25p80 test
* tests: cleanup ptimer-test
* pxa2xx: Auto-assign name for i2c bus in i2c_init_bus
* target-arm: handle tagged addresses in A64 code
* target-arm: Fix masking of PC lower bits when doing exception returns
* target-arm: Implement dummy MDCCINT_EL1
* target-arm: Add trace events for the generic timers
* hw/intc/arm_gicv3: Fix ICC register tracepoints
* hw/char/pl011: Add trace events
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=L99V
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20161017' into staging
target-arm:
* target-arm: kvm: use AddressSpace-specific listener
* aspeed: add SMC controllers
* hw/arm/boot: allow using a command line specified dtb without a kernel
* hw/dma/pl080: Fix bad bit mask
* hw/intc/arm_gic_kvm: Fix build on aarch64 with some compilers
* hw/arm/virt: fix ACPI tables for ITS
* tests: add a m25p80 test
* tests: cleanup ptimer-test
* pxa2xx: Auto-assign name for i2c bus in i2c_init_bus
* target-arm: handle tagged addresses in A64 code
* target-arm: Fix masking of PC lower bits when doing exception returns
* target-arm: Implement dummy MDCCINT_EL1
* target-arm: Add trace events for the generic timers
* hw/intc/arm_gicv3: Fix ICC register tracepoints
* hw/char/pl011: Add trace events
# gpg: Signature made Mon 17 Oct 2016 19:39:42 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20161017: (25 commits)
hw/char/pl011: Add trace events
hw/intc/arm_gicv3: Fix ICC register tracepoints
target-arm: Add trace events for the generic timers
target-arm: Implement dummy MDCCINT_EL1
Fix masking of PC lower bits when doing exception returns
target-arm: Comments added to identify cases in a switch
target-arm: Code changes to implement overwrite of tag field on PC load
target-arm: Infrastucture changes to enable handling of tagged address loading into PC
pxa2xx: Auto-assign name for i2c bus in i2c_init_bus.
tests: cleanup ptimer-test
tests: add a m25p80 test
hw/arm/virt: no ITS on older machine types
hw/arm/virt-acpi-build: fix MADT generation
hw/intc/arm_gic_kvm: Fix build on aarch64
hw/dma/pl080: Fix bad bit mask (PL080_CONF_M1 | PL080_CONF_M1)
hw/arm/boot: allow using a command line specified dtb without a kernel
aspeed: add support for the SMC segment registers
aspeed: create mapping regions for the maximum number of slaves
aspeed: add support for the AST2500 SoC SMC controllers
aspeed: extend the number of host SPI controllers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix some problems with the tracepoints for ICC register reads
and writes:
* tracepoints for ICC_BPR<n>, ICC_AP<n>R<x>, ICC_IGRPEN<n>,
ICC_EIOR<n> were not printing the <n> that indicated whether
the access was to the group 0 or 1 register
* the ICC_IGREPEN1_EL3 read function was not actually calling
the associated tracepoint
* the ICC_BPR<n> write function was incorrectly calling the
tracepoint for ICC_PMR writes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1476294876-12340-4-git-send-email-peter.maydell@linaro.org
Add some useful trace events for the ARM generic timers (notably
the various register writes and the resulting IRQ line state).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1476294876-12340-3-git-send-email-peter.maydell@linaro.org
MDCCINT_EL1 is part of the DCC debugger communication
channel between the CPU and an attached external debugger.
QEMU doesn't implement this, but since Linux may try
to access this register we need to provide at least
a dummy implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1476294876-12340-2-git-send-email-peter.maydell@linaro.org
In commit 9b6a3ea7a6 store_reg() was changed to mask
both bits 0 and 1 of the new PC value when in ARM mode.
Unfortunately this broke the exception return code paths
when doing a return from ARM mode to Thumb mode: in some
of these we write a new CPSR including new Thumb mode
bit via gen_helper_cpsr_write_eret(), and then use store_reg()
to write the new PC. In this case if the new CPSR specified
Thumb mode then masking bit 1 of the PC is incorrect
(these code paths correspond to the v8 ARM ARM pseudocode
function AArch32.ExceptionReturn(), which always aligns the
new PC appropriately for the new instruction set state).
Instead of using store_reg() in exception-return code paths,
call a new store_pc_exc_ret() which stores the raw new PC
value to env->regs[15], and then mask it appropriately in
the subsequent helper_cpsr_write_eret() where the new
env->thumb state is available.
This fixes a bug introduced by 9b6a3ea7a6 which caused
crashes/hangs or otherwise bad behaviour for Linux when
userspace was using Thumb.
Reported-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1476113163-24578-1-git-send-email-peter.maydell@linaro.org
3 cases in a switch in disas_exc() require reference to the
ARM ARM spec in order to determine what case they're handling.
Signed-off-by: Thomas Hanson <thomas.hanson@linaro.org>
Message-id: 1476301853-15774-5-git-send-email-thomas.hanson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For BR, BLR and RET instructions, if tagged addresses are enabled, the
tag field in the address must be cleared out prior to loading the
address into the PC. Depending on the current EL, it will be set to
either all 0's or all 1's.
Signed-off-by: Thomas Hanson <thomas.hanson@linaro.org>
Message-id: 1476301853-15774-3-git-send-email-thomas.hanson@linaro.org
[PMM: remove unnecessary gen_a64_set_pc_reg() wrapper,
rename gen_a64_set_pc_var() to gen_a64_set_pc(), fix stray
misindentation]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When capturing the current CPU state for the TB, extract the TBI0 and TBI1
values from the correct TCR for the current EL and then add them to the TB
flags field.
Then, at the start of code generation for the block, copy the TBI fields
into the DisasContext structure.
Signed-off-by: Thomas Hanson <thomas.hanson@linaro.org>
Message-id: 1476301853-15774-2-git-send-email-thomas.hanson@linaro.org
[PMM: drop useless 'extern' keyword on function prototypes;
provide CONFIG_USER_ONLY trivial versions of arm_regime_tbi[01]()]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a name is provided, the same name is assigned to both the I2C
controllers. Leaving it NULL, causes names to be automatically
assigned with an ID suffix, giving unique names to each
controller. This helps us to uniquely identify each controller in the
device tree, for example when adding an I2C device.
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1476351885-8905-1-git-send-email-vijaykumar@zilogic.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
1) ptimer-test is not a qtest---it runs the ptimer.c code directly in the
ptimer-test process
2) ptimer-test has its own stubs file, so there is no need to add more
stubs to stubs/vmstate.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test uses the palmetto platform and the Aspeed SPI controller to
test the m25p80 flash module device model. The flash model is defined
by the platform (n25q256a) and it would be nice to find way to control
it, using a property probably.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1475787271-28794-1-git-send-email-clg@kaod.org
Brainstormed-with: Greg Kurz <groug@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should avoid exposing new hardware (through DT and ACPI) on older
machine types. This patch keeps 2.7 and older from changing, despite
the introduction of ITS support for 2.8.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1476117341-32690-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can't return early from build_* functions, as build_header is
only called at the end.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1476117341-32690-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove unused debugging code to fix native building on aarch64. Without
this change, the following -Werr output inhibits make from completing.
qemu/hw/intc/arm_gic_kvm.c:38:18: error: debug_gic_kvm defined but not used [-Werror=unused-const-variable=]
static const int debug_gic_kvm = 0;
^~~~~~~~~~~~~
cc1: all warnings being treated as errors
qemu/rules.mak:60: recipe for target 'hw/intc/arm_gic_kvm.o' failed
make[1]: *** [hw/intc/arm_gic_kvm.o] Error 1
Makefile:205: recipe for target 'subdir-aarch64-softmmu' failed
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20161011163202.19720-1-cov@codeaurora.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The M1 and M2 bits are both used for configuring the endianness
of the AHB master interfaces, so the second PL080_CONF_M1 should
be PL080_CONF_M2 instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/1631773
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1476274451-26567-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When kernel and device tree are specified in the QEMU commandline, then
this device tree may be modified e.g. to add virtio_mmio devices.
With a bootloader e.g. on a flash device these extra devices are not
available.
With this change, the device tree can be specified at the QEMU commandline.
The modified device tree made available to the bootloader with the same
mechanism already supported by device trees fully generated by QEMU.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Message-id: 1473520054-402-1-git-send-email-m.olbrich@pengutronix.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMC controller on the Aspeed SoC has a set of registers to
configure the mapping of each flash module in the SoC address
space. Writing to these registers triggers a remap of the memory
region and the spec requires a certain number of checks before doing
so.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-7-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMC controller on the Aspeed SoC has a set of registers to
configure the mapping of each flash module in the SoC address
space. These mapping windows are configurable even though no SPI slave
is attached to the controller.
Also rewrite a bit the comments in the code on this topic.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-6-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMC controllers on the Aspeed AST2500 SoC are very similar to the
ones found on the AST2400. The differences are on the number of
supported flash modules and their default mappings in the SoC address
space.
The Aspeed AST2500 has one SPI controller for the BMC firmware and two
for the host firmware. All controllers have now the same set of
registers compatible with the AST2400 FMC controller and the legacy
'SMC' controller is fully gone.
We keep the FMC object to act as the BMC SPI controller and add a new
SPI controller for the host. We also have to introduce new type names
to handle the differences in the flash modules memory mappping.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AST2500 SoC has two. Let's prepare ground for the next changes
which will add the required definitions for the second host SPI
controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will ease the definition of the new controllers for the AST2500
SoC and also ease the support of the segment registers, which provide
a way to reconfigure the mapping window of each slave.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Aspeed SoC has three different types of SMC (Static Memory
Controller) controllers: the SMC (legacy), the FMC (the new one) and
the SPI for the host PNOR. The FMC and the SPI models are now
converging on the AST2500 SoC and the SMC, which was still available
on the AST2400 SoC, was removed.
The Aspeed SoC does not provide support for the legacy SMC
controller. So, let's rename the 'smc' object to 'fmc' to clarify its
nature.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only address space where the GIC devices are added is
address_space_memory. There is no need to use a global
MemoryListener.
This removes the only user of global MemoryListeners.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PMM: added missing #include "exec/address-spaces.h"]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1475219846-32609-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch allocates memory for txbuf in struct Stream rather than the stack.
As a result, the stack frame size is reduced of stream_process_mem2s().
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch does three things:
- It adds a list of restrictions and ToDos
- It corrects the header --- lines to match the length of the header
- It clarifies the force-raw option
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: e75d1d285cf8f45037c41ebe1bc3f68120f09cb9.1475702918.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When explicitly enabling unmigratable flags using "-cpu host"
(e.g. "-cpu host,+invtsc"), the requested feature won't be
enabled because cpu->migratable is true by default.
This is inconsistent with all other CPU models, which don't have
the "migratable" option, making "+invtsc" work without the need
for extra options.
This happens because x86_cpu_filter_features() uses
cpu->migratable as an argument for
x86_cpu_get_supported_feature_word(). This is not useful
because:
2) on "-cpu host" it only makes QEMU disable features that were
explicitly enabled in the command-line;
1) on all the other CPU models, cpu->migratable is already false.
The fix is to just use 'false' as an argument to
x86_cpu_get_supported_feature_word() in
x86_cpu_filter_features().
Note that:
* This won't change anything for people using using
"-cpu host" or "-cpu host,migratable=<on|off>" (with no extra
features) because the x86_cpu_get_supported_feature_word() call
on the cpu->host_features check uses cpu->migratable as
argument.
* This won't change anything for any CPU model except "host"
because they all have cpu->migratable == false (and only "host"
has the "migratable" property that allows it to be changed).
* This will only change things for people using "-cpu host,+<feature>",
where <feature> is a non-migratable feature. The only existing
named non-migratable feature is "invtsc".
In other words, this change will only affect people using
"-cpu host,+invtsc" (that will now get what they asked for: the
invtsc flag will be enabled). All other use cases are unaffected.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To do the conversion, the file_backend_class_init() was moved
after the getter/setter functions. The old
file_backend_instance_init() function was removed because it is
not needed anymore.
The NULL errp arguments on the property registration calls were
changed to &error_abort.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The NULL errp arguments on the property registration calls were
changed to &error_abort.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When doing the conversion, the NULL errp arguments on the
property registration calls were changed to &error_abort.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
machine_set_property() replaces '_' by '-' in the property name.
Except it fails to replace an initial '_'. Screwed up in commit
b0ddb8b. Reproducer: "-M pc,__foo_bar=true" produces "Property
'._-foo-bar' not found".
Error messages using a mangled name rather than the name the user
actually wrote is user-hostile, but that's a different topic.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Fill the "unavailable-features" field on the x86 implementation
of query-cpu-definitions.
Cc: Jiri Denemark <jdenemar@redhat.com>
Cc: libvir-list@redhat.com
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When probing for CPU model information, we need to reuse the code
that initializes CPUID fields, but not the remaining side-effects
of x86_cpu_realizefn(). Move that code to a separate function
that can be reused later.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
TYPE_X86_CPU now call cpu_exec_init() on realize, so we don't
need to set cannot_destroy_with_object_finalize_yet anymore.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Assume that KVM would have returned the same on subsequent runs.
Abstract the memoizaiton pattern into macros and call it memorize as
adding the r makes it less obscure.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cluster x2APIC cannot work without KVM's x2apic API when the maximal
APIC ID is greater than 8 and only KVM's LAPIC can support x2APIC, so we
forbid other APICs and also the old KVM case with less than 9, to
simplify the code.
There is no point in enabling EIM in forbidden APICs, so we keep it
enabled only for the KVM APIC; unconditionally, because making the
option depend on KVM version would be a maintanance burden.
Old QEMUs would enable eim whenever intremap was on, which would trick
guests into thinking that they can enable cluster x2APIC even if any
interrupt destination would get clamped to 8 bits.
Depending on your configuration, QEMU could notice that the destination
LAPIC is not present and report it with a very non-obvious:
KVM: injection failed, MSI lost (Operation not permitted)
Or the guest could say something about unexpected interrupts, because
clamping leads to aliasing so interrupts were being delivered to
incorrect VCPUs.
KVM_X2APIC_API is the feature that allows us to enable EIM for KVM.
QEMU 2.7 allowed EIM whenever interrupt remapping was enabled. In order
to keep backward compatibility, we again allow guests to misbehave in
non-obvious ways, and make it the default for old machine types.
A user can enable the buggy mode it with "x-buggy-eim=on".
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The default (auto) emulates the current behavior.
A user can now control EIM like
-device intel-iommu,intremap=on,eim=off
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* there no point in configuring the device if realization is going to
fail, so move the check to the beginning,
* create a separate function for the check,
* use error_setg() instead error_report().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The MMIO interface to APIC only allowed 8 bit addresses, which is not
enough for 32 bit addresses from EIM remapping.
Intel stored upper 24 bits in the high MSI address, so use the same
technique. The technique is also used in KVM MSI interface.
Other APICs are unlikely to handle those upper bits.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The MMIO based interface to APIC doesn't work well with MSIs that have
upper address bits set (remapped x2APIC MSIs). A specialized interface
is a quick and dirty way to avoid the shortcoming.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Every configuration has only up to one APIC class and we'll be extending
the class with a function that can be called without an instanced
object, so a direct access to the class is convenient.
This patch will break compilation if some code uses apic_get_class()
with CONFIG_USER_ONLY.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
x86_cpu_filter_features() will be reused by code that shouldn't
print any warning. Move the warning code to a new
x86_cpu_report_filtered_features() function, and call it from
x86_cpu_realizefn().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a new optional field to query-cpu-definitions schema:
"unavailable-features". It will contain a list of QOM properties
that prevent the CPU model from running in the current host.
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Michael Mueller <mimu@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Jiri Denemark <jdenemar@redhat.com>
Cc: libvir-list@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of treating the FP and SSE bits as special cases, add
them to the x86_ext_save_areas array. This will simplify the code
that calculates the supported xsave components and the size of
the xsave area.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of keeping the aliases inside the feature name arrays and
require parsing the strings, just register alias properties
manually. This simplifies the code for property registration and
lookup.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of translating the feature name entries when adding
property names, store the actual property names in the feature
name array.
For reference, here is the full list of functions that use
FeatureWordInfo::feat_names:
* x86_cpu_get_migratable_flags(): not affected, as it just
check for non-NULL values.
* report_unavailable_features(): informative only. It will
start printing feature names with hyphens.
* x86_cpu_list(): informative only. It will start printing
feature names with hyphens
* x86_cpu_register_feature_bit_props(): not affected, as it
was already calling feat2prop(). Now we can remove the
feat2prop() calls safely.
So, the only user-visible effect of this patch are the new names
being used in help and error messages for users.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of using custom feature name lookup code for
plus_features/minus_features, save the property names used in
"[+-]feature" and use object_property_set_bool() to set them.
We don't need a feat2prop() call because we now have alias
properties for the old names containing underscores.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
