Seeing some inlining missing in internal uses of symbolizer. I'll work
on a reproduction, tests, improvements & recommit as soon as possible.
(Chandler would like it to be known that this improvement did make
check-llvm 4x faster... - so there's certainly some fairly good
motivation to push on fixing/figuring this out & getting it back in)
This reverts commit r321345.
llvm-svn: 324981
Here are the number of additional debug values salvaged in a stage2
build of clang:
63 SALVAGE: MUL
1250 SALVAGE: SDIV
(No values were salvaged from `srem` instructions in this experiment,
but it's a simple case to handle so we might as well.)
llvm-svn: 324976
Here are the number of additional debug values salvaged in a stage2
build of clang:
1912 SALVAGE: ASHR
405 SALVAGE: LSHR
249 SALVAGE: SHL
llvm-svn: 324975
Also make a drive-by-fix of a bug in the subregister scan code that
only triggers with an incomplete or otherwise very irregular machine
description.
rdar://problem/37404493
llvm-svn: 324972
These intrinsic folds were added with D41381, but only allowed with isFast().
That's more than necessary because FMF has 'reassoc' to apply to these
kinds of folds after D39304, and that's all we need in these cases.
Differential Revision: https://reviews.llvm.org/D43160
llvm-svn: 324967
The diff to use 'reassoc' is part of D43160; it should not have
been made with rL324961. Reverting that part here, so we'll
see the intended diff with the code change.
llvm-svn: 324963
Summary:
This patch makes postdominators always recalculate the tree when an update causes to change the tree roots.
As @dmgreen noticed in [[ https://reviews.llvm.org/D41298 | D41298 ]], the previous implementation was not conservative enough and it was possible to end up with a PostDomTree that was different than a freshly computed one.
The patch also compares postdominators with a freshly computed tree at the end of full verification to make sure we don't hit similar issues in the future.
This should (ideally) be also backported to 6.0 before the release, although I don't have any reports of this causing an observable error. It should be safe to do it even if it's late in the release, as the change only makes the current behavior more conservative.
Reviewers: dmgreen, dberlin, davide, brzycki, grosser
Reviewed By: brzycki, grosser
Subscribers: llvm-commits, dmgreen
Differential Revision: https://reviews.llvm.org/D43140
llvm-svn: 324962
Some tests didn't add much value because we already show stronger
constraints for the folds in other tests, so the weaker versions
were deleted.
Moved the remaining tests into 1 file because the folds are
very similar and handled from 1 place in the code.
llvm-svn: 324961
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
InstCombine pass to cease using the deprecated MemoryIntrinsic::getAlignment() method, and
instead we use the separate getSourceAlignment and getDestAlignment APIs to simplify
the source and destination alignment attributes separately.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781, rL324784, rL324955 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
Reviewers: majnemer, bollu, efriedma
Reviewed By: efriedma
Subscribers: efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D42871
llvm-svn: 324960
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
creation of memcpys in the SafeStack pass to set the alignment of the destination object to
its stack alignment while separately setting the source byval arguments alignment to its
alignment.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. (rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781, rL324784 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
Reviewers: eugenis, bollu
Reviewed By: eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42710
llvm-svn: 324955
Summary:
wasm32-unknown-unknown-elf has MCSymbols that are not MCSymbolWasms, so
we need a non-asserting cast here.
Reviewers: dschuff, sunfish
Subscribers: jfb, sbc100, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D43205
llvm-svn: 324942
This started by noticing that scalar and vector types were producing different results with div ops in PR36305:
https://bugs.llvm.org/show_bug.cgi?id=36305
...but the problem is bigger. I couldn't keep it straight without a table, so I'm attaching that as a PDF to
the review. The x86 tests in undef-ops.ll correspond to that table.
Green means that instsimplify and the DAG agree on the result for all types.
Red means the DAG was returning undef when IR was not.
Yellow means the DAG was returning a non-undef result when IR returned undef.
This patch assumes that we're currently doing the right thing in IR.
Note: I couldn't find any problems with lowering vector constants as the code comments were warning,
but those comments were written long ago in rL36413 .
Differential Revision: https://reviews.llvm.org/D43141
llvm-svn: 324941
If merging them, the dllexport attribute needs to be brought along
to the new GlobalAlias.
Differential Revision: https://reviews.llvm.org/D43192
llvm-svn: 324937
It caused assertion failure
Assertion failed: (!DD.IsLambda && !MergeDD.IsLambda && "faked up lambda definition?"), function MergeDefinitionData, file /Users/buildslave/jenkins/workspace/clang-stage1-configure-RA/llvm/tools/clang/lib/Serialization/ASTReaderDecl.cpp, line 1675.
on the second stage build bots.
llvm-svn: 324932
Rather than encode the absence of a checksum with a Kind variant, instead put
both the kind and value in a struct and wrap it in an Optional.
Differential Revision: http://reviews.llvm.org/D43043
llvm-svn: 324928
This is similar to the instsimplify fold added with D42385
( rL323716 )
...but this can't be in instsimplify because we're creating/morphing
a different instruction.
llvm-svn: 324927
Update BlockColors after splitting predecessors. Do not allow splitting
EHPad for sinking when the BlockColors is not empty, so we can
simply assign predecessor's color to the new block.
Fixes PR36184
llvm-svn: 324916
Expand existing SchedRW to encompass these like it did for the other memory offset movs - added comments to closing braces to keep track of def scopes.
We only tagged it with the itinerary class, so completeness checks were erroneously passed (PR35639).
llvm-svn: 324910
Armv8.1-A added an atomic load-clear instruction (which performs bitwise
and with the complement of it's operand), but not a load-and
instruction. Our current code-generation for atomic load-and always
inserts an MVN instruction to invert its argument, even if it could be
folded into a constant or another instruction.
This adds lowering early in selection DAG to convert a load-and
operation into an xor with -1 and a load-clear, allowing the normal DAG
optimisations to work on it.
To do this, I've had to add a new ISD opcode, ATOMIC_LOAD_CLR. I don't
see any easy way to do this with an AArch64-specific ISD node, because
the code-generation for atomic operations assumes the SDNodes are of
type AtomicSDNode.
I've left the old tablegen patterns in because they are still needed for
global isel.
Differential revision: https://reviews.llvm.org/D42478
llvm-svn: 324908
Tag AVX512 variants to match SSE/AVX originals.
We only tagged it with the itinerary class, so completeness checks were erroneously passed (PR35639).
llvm-svn: 324901
We only tagged it with the itinerary class, so completeness checks were erroneously passed (PR35639).
AMD targets can perform these a lot quicker than WriteMicrocoded so will need an override in the models.
llvm-svn: 324897
