Summary:
A DBG_VALUE that is referring to a physical register is
valid up until the next def of the register, or the end
of the basic block that it belongs to.
LiveDebugVariables is computing live intervals (slot index
ranges) for DBG_VALUE instructions, before regalloc, in order
to be able to re-insert DBG_VALUE instructions again after
regalloc. When the DBG_VALUE is mapping a variable to a
physical register we do not need to compute the range. We
should simply re-insert the DBG_VALUE at the start position.
The problem that was found, resulting in this patch, was a
situation when the DBG_VALUE was the last real use of the
physical register. The computeIntervals/extendDef methods
extended the range to cover the whole basic block, even though
the physical register very well could be allocated to some
virtual register inside the basic block. So the extended
range could not be trusted.
This patch is a preparation for https://reviews.llvm.org/D38229,
where the goal is to insert DBG_VALUE after each new definition
of a variable, even if the virtual registers that the variable
was connected to has been coalesced into using the same physical
register (e.g. due to two address instructions). For more info
see https://bugs.llvm.org/show_bug.cgi?id=34545
Reviewers: aprantl, rnk, echristo
Reviewed By: aprantl
Subscribers: Ka-Ka, llvm-commits
Differential Revision: https://reviews.llvm.org/D38140
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314414 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds dumping of line table instructions as well as the final
state at each specified pc value in verbose mode. This is essentially
the same as the default in Darwin's dwarfdump. Dumping the actual line
table opcodes can be particularly useful for something like debugging a
bad `.debug_line` section.
Differential revision: https://reviews.llvm.org/D37971
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313910 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312970 91177308-0d34-0410-b5e6-96231b3b80d8
This change simplifies code that has to deal with
DIGlobalVariableExpression and mirrors how we treat DIExpressions in
debug info intrinsics. Before this change there were two ways of
representing empty expressions on globals, a nullptr and an empty
!DIExpression().
If someone needs to upgrade out-of-tree testcases:
perl -pi -e 's/(!DIGlobalVariableExpression\(var: ![0-9]*)\)/\1, expr: !DIExpression())/g' <MYTEST.ll>
will catch 95%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312144 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Based on Fred's patch here: https://reviews.llvm.org/D6771
I can't seem to commandeer the old review, so I'm creating a new one.
With that change the locations exrpessions are pretty printed inline in the
DIE tree. The output looks like this for debug_loc entries:
DW_AT_location [DW_FORM_data4] (0x00000000
0x0000000000000001 - 0x000000000000000b: DW_OP_consts +3
0x000000000000000b - 0x0000000000000012: DW_OP_consts +7
0x0000000000000012 - 0x000000000000001b: DW_OP_reg0 RAX, DW_OP_piece 0x4
0x000000000000001b - 0x0000000000000024: DW_OP_breg5 RDI+0)
And like this for debug_loc.dwo entries:
DW_AT_location [DW_FORM_sec_offset] (0x00000000
Addr idx 2 (w/ length 190): DW_OP_consts +0, DW_OP_stack_value
Addr idx 3 (w/ length 23): DW_OP_reg0 RAX, DW_OP_piece 0x4)
Simple locations without ranges are printed inline:
DW_AT_location [DW_FORM_block1] (DW_OP_reg4 RSI, DW_OP_piece 0x4, DW_OP_bit_piece 0x20 0x0)
The debug_loc(.dwo) dumping in changed accordingly to factor the code.
Reviewers: dblaikie, aprantl, friss
Subscribers: mgorny, javed.absar, hiraditya, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D37123
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312042 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Most DIExpressions are empty or very simple. When they are complex, they
tend to be unique, so checking them inline is reasonable.
This also avoids the need for CodeGen passes to append to the
llvm.dbg.mir named md node.
See also PR22780, for making DIExpression not be an MDNode.
Reviewers: aprantl, dexonsmith, dblaikie
Subscribers: qcolombet, javed.absar, eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37075
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311594 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
MIRParserImpl::computeFunctionProperties uses MRI.getNumVirtRegs() to
set the NoVReg property. By adding a bunch of registers to the MIR test
cases, the NoVReg property is not set when importing the MIR. Otherwise
NoVReg is set after instruction selection while the machine instructions
still contain virtual registers, causing expensive checks to fail.
Reviewers: efriedma, MatzeB, aprantl
Reviewed By: MatzeB, aprantl
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D36152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310178 91177308-0d34-0410-b5e6-96231b3b80d8
instead of using the deprecated offset field of DBG_VALUE.
This has no observable effect on the generated DWARF, but the
assembler comments will look different.
rdar://problem/33580047
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309773 91177308-0d34-0410-b5e6-96231b3b80d8
The instruction it falls over on is an IMPLICT_DEF that also happens
to be the only instruction in its lexical scope. That LexicalScope has
never been created because its range is empty. This patch skips over
all meta-instructions instead of just DBG_VALUEs.
Thanks to David Blaikie for providing a testcase!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305853 91177308-0d34-0410-b5e6-96231b3b80d8
For the following motivating example
bool c();
void f();
bool start() {
bool result = c();
if (!c()) {
result = false;
goto exit;
}
f();
result = true;
exit:
return result;
}
we would previously generate a single DW_AT_const_value(1) because
only the DBG_VALUE in the second-to-last basic block survived
codegen. This patch improves the heuristic used to determine when a
DBG_VALUE is available at the beginning of its variable's enclosing
lexical scope:
- Stop giving singular constants blanket permission to take over the
entire scope. There is still a special case for constants in the
function prologue that we also miight want to retire later.
- Use the lexical scope information to determine available-at-entry
instead of proximity to the function prologue.
After this patch we generate a location list with a more accurate
narrower availability for the constant true value. As a pleasant side
effect, we also generate inline locations instead of location lists
where a loacation covers the entire range of the enclosing lexical
scope.
Measured on compiling llc with four targets this doesn't have an
effect on compile time and reduces the size of the debug info for llc
by ~600K.
rdar://problem/30286912
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305599 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch is part of 3 patches that together form a single patch, but must be introduced in stages in order not to break things.
The way that LLVM interprets DW_OP_plus in DIExpression nodes is basically that of the DW_OP_plus_uconst operator since LLVM expects an unsigned constant operand. This unnecessarily restricts the DW_OP_plus operator, preventing it from being used to describe the evaluation of runtime values on the expression stack. These patches try to align the semantics of DW_OP_plus and DW_OP_minus with that of the DWARF definition, which pops two elements off the expression stack, performs the operation and pushes the result back on the stack.
This is done in three stages:
• The first patch (LLVM) adds support for DW_OP_plus_uconst.
• The second patch (Clang) contains changes all its uses from DW_OP_plus to DW_OP_plus_uconst.
• The third patch (LLVM) changes the semantics of DW_OP_plus and DW_OP_minus to be in line with its DWARF meaning. This patch includes the bitcode upgrade from legacy DIExpressions.
Patch by Sander de Smalen.
Reviewers: echristo, pcc, aprantl
Reviewed By: aprantl
Subscribers: fhahn, javed.absar, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D33894
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305386 91177308-0d34-0410-b5e6-96231b3b80d8
The AArch64 backend marks calls that involve aggregate function
arguments as having an implicit def of SP. We already have the same
workaround in LiveDebugValues and in DbgValueHistoryCalculator for SP
clobbers in register masks. This adds register defs to the list.
Fixes rdar://problem/30361929 and Swift SR-3851.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304471 91177308-0d34-0410-b5e6-96231b3b80d8
MachineInstructions that don't generate any code (such as
IMPLICIT_DEFs) should not generate any debug info either.
Fixes PR33107.
https://bugs.llvm.org/show_bug.cgi?id=33107
This reapplies r303566 without any modifications. The stage2 build
failures persisted even after reverting this patch, and looking back
through history, it looks like these tests are flaky.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303575 91177308-0d34-0410-b5e6-96231b3b80d8
If a register location can only be described by a complex expression
(i.e., multiple subregisters) it doesn't safely compose with another
complex expression. For example, it is not possible to apply a
DW_OP_deref operation to multiple DW_OP_pieces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298472 91177308-0d34-0410-b5e6-96231b3b80d8
If a register location can only be described by a complex expression
(i.e., multiple subregisters) it doesn't safely compose with another
complex expression. For example, it is not possible to apply a
DW_OP_deref operation to multiple DW_OP_pieces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298389 91177308-0d34-0410-b5e6-96231b3b80d8
Store instructions can have more than one memory operand as a result
of optimizations that fold different stores into one.
When we identify spill instructions to generate DBG_VALUE instructions
to record the spilling of a variable, we disregard stores with
multiple memory operands for now. We may miss some relevant spills but
the handling is a bit more complex, so we'll do it in a different patch.
This fixes PR31935.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295093 91177308-0d34-0410-b5e6-96231b3b80d8
It caused undefined behavior in VarLoc. As far as I investigated,
- VarLoc::VarLoc() treats negative offset value as InvalidKind.
Consider the case that (int64_t)MI.getOperand(1).getImm() is negative and whether it satisfies ((uint64_t)Offset < (1ULL << 32)).
- Comparison operators in VarLoc behave undefined since VarLoc::Loc.Hash is uninitialized in case of InvalidKind.
I guess Offset (in VarLoc) could be made aware of signed, but I am not sure.
So I have reverted it for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294447 91177308-0d34-0410-b5e6-96231b3b80d8
When variables are spilled to the stack by the register allocator, keep track of their
debug locations in LiveDebugValues and insert DBG_VALUE instructions at the appropriate
place. Ensure that the locations are propagated down the dominator tree via the existing
mechanisms.
Reviewer: aprantl
Differential Revision: https://reviews.llvm.org/D29500
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294356 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades and a change
to the Bitcode record for DIGlobalVariable, that makes upgrading the
old format unambiguous also for variables without DIExpressions.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290153 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 289920 (again).
I forgot to implement a Bitcode upgrade for the case where a DIGlobalVariable
has not DIExpression. Unfortunately it is not possible to safely upgrade
these variables without adding a flag to the bitcode record indicating which
version they are.
My plan of record is to roll the planned follow-up patch that adds a
unit: field to DIGlobalVariable into this patch before recomitting.
This way we only need one Bitcode upgrade for both changes (with a
version flag in the bitcode record to safely distinguish the record
formats).
Sorry for the churn!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289982 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289920 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289902 91177308-0d34-0410-b5e6-96231b3b80d8
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. By default, use this for branch targets
and some other cases that have no specified source location, to
prevent inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Updated patch allows enabling or suppressing this behavior for all
unspecified source locations.
Differential Revision: http://reviews.llvm.org/D24180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289468 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM's use of DW_OP_bit_piece is incorrect and a based on a
misunderstanding of the wording in the DWARF specification. The offset
argument of DW_OP_bit_piece refers to the offset into the location
that is on the top of the DWARF expression stack, and not an offset
into the source variable. This has since also been clarified in the
DWARF specification.
This patch fixes all uses of DW_OP_bit_piece to emit the correct
offset and simplifies the DwarfExpression class to semi-automaticaly
emit empty DW_OP_pieces to adjust the offset of the source variable,
thus simplifying the code using DwarfExpression.
While this is an incompatible bugfix, in practice I don't expect this
to be much of a problem since LLVM's old interpretation and the
correct interpretation of DW_OP_bit_piece differ only when there are
gaps in the fragmented locations of the described variables or if
individual fragments are smaller than a byte. LLDB at least won't
interpret locations with gaps in them because is has no way to present
undefined bits in a variable, and there is a high probability that an
old-form expression will be malformed when interpreted correctly,
because the DW_OP_bit_piece offset will be outside of the location at
the top of the stack.
As a nice side-effect, this patch enables us to use a more efficient
encoding for subregisters: In order to express a sub-register at a
non-zero offset we now use a DW_OP_bit_piece instead of shifting the
value into place manually.
This patch also adds missing test coverage for code paths that weren't
exercised before.
<rdar://problem/29335809>
Differential Revision: https://reviews.llvm.org/D27550
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289266 91177308-0d34-0410-b5e6-96231b3b80d8
This addresses PR26055 LiveDebugValues is very slow.
Contrary to the old LiveDebugVariables pass LiveDebugValues currently
doesn't look at the lexical scopes before inserting a DBG_VALUE
intrinsic. This means that we often propagate DBG_VALUEs much further
down than necessary. This is especially noticeable in large C++
functions with many inlined method calls that all use the same
"this"-pointer.
For example, in the following code it makes no sense to propagate the
inlined variable a from the first inlined call to f() into any of the
subsequent basic blocks, because the variable will always be out of
scope:
void sink(int a);
void __attribute((always_inline)) f(int a) { sink(a); }
void foo(int i) {
f(i);
if (i)
f(i);
f(i);
}
This patch reuses the LexicalScopes infrastructure we have for
LiveDebugVariables to take this into account.
The effect on compile time and memory consumption is quite noticeable:
I tested a benchmark that is a large C++ source with an enormous
amount of inlined "this"-pointers that would previously eat >24GiB
(most of them for DBG_VALUE intrinsics) and whose compile time was
dominated by LiveDebugValues. With this patch applied the memory
consumption is 1GiB and 1.7% of the time is spent in LiveDebugValues.
https://reviews.llvm.org/D24994
Thanks to Daniel Berlin and Keith Walker for reviewing!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@282611 91177308-0d34-0410-b5e6-96231b3b80d8
This patch reverses the edge from DIGlobalVariable to GlobalVariable.
This will allow us to more easily preserve debug info metadata when
manipulating global variables.
Fixes PR30362. A program for upgrading test cases is attached to that
bug.
Differential Revision: http://reviews.llvm.org/D20147
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281284 91177308-0d34-0410-b5e6-96231b3b80d8
Rename AllVRegsAllocated to NoVRegs. This avoids the connotation of
running after register and simply describes that no vregs are used in
a machine function. With that we can simply compute the property and do
not need to dump/parse it in .mir files.
Differential Revision: http://reviews.llvm.org/D23850
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279698 91177308-0d34-0410-b5e6-96231b3b80d8
tracksSubRegLiveness only depends on the Subtarget and a cl::opt, there
is not need to change it or save/parse it in a .mir file.
Make the field const and move the initialization LiveIntervalAnalysis to the
MachineRegisterInfo constructor. Also cleanup some code and fix some
instances which better use MachineRegisterInfo::subRegLivenessEnabled() instead
of TargetSubtargetInfo::enableSubRegLiveness().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279676 91177308-0d34-0410-b5e6-96231b3b80d8
In an instruction like:
CFI_INSTRUCTION .cfi_def_cfa ...
we can drop the '.cfi_' prefix since that should be obvious by the
context:
CFI_INSTRUCTION def_cfa ...
While being a terser and cleaner syntax this also prepares to dropping
support for identifiers starting with a dot character so we can use it
for expressions.
Differential Revision: http://reviews.llvm.org/D22388
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276785 91177308-0d34-0410-b5e6-96231b3b80d8
Currently the MIR framework prints all its outputs (errors and actual
representation) on stderr.
This patch fixes that by printing the regular output in the output
specified with -o.
Differential Revision: http://reviews.llvm.org/D22251
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275314 91177308-0d34-0410-b5e6-96231b3b80d8
This patch modifies the LiveDebugValues pass to use more efficient set
data structures as outlined in PR26055. Both VarLocSet and VarLocList are
now SparseBitVectors which allows us to perform much faster bitvector
arithmetic on them.
The speedup can be in the order of minutes especially on ASANified code.
The change is not NFC in the assembler output because the inserted
DBG_VALUEs are now sorted by variable and location.
Many thanks to Daniel Berlin for helping design the improved algorithm and
reviewing the patch.
https://llvm.org/bugs/show_bug.cgi?id=26055http://reviews.llvm.org/D20178
rdar://problem/24091200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270776 91177308-0d34-0410-b5e6-96231b3b80d8
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266446 91177308-0d34-0410-b5e6-96231b3b80d8
MachineFunctionProperties represents a set of properties that a MachineFunction
can have at particular points in time. Existing examples of this idea are
MachineRegisterInfo::isSSA() and MachineRegisterInfo::tracksLiveness() which
will eventually be switched to use this mechanism.
This change introduces the AllVRegsAllocated property; i.e. the property that
all virtual registers have been allocated and there are no VReg operands
left.
With this mechanism, passes can declare that they require a particular property
to be set, or that they set or clear properties by implementing e.g.
MachineFunctionPass::getRequiredProperties(). The MachineFunctionPass base class
verifies that the requirements are met, and handles the setting and clearing
based on the delcarations. Passes can also directly query and update the current
properties of the MF if they want to have conditional behavior.
This change annotates the target-independent post-regalloc passes; future
changes will also annotate target-specific ones.
Reviewers: qcolombet, hfinkel
Differential Revision: http://reviews.llvm.org/D18421
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264593 91177308-0d34-0410-b5e6-96231b3b80d8
Now register parameters that aren't saved to the stack or CSRs are
considered dead after the first call. Previously the debugger would show
whatever was in the register.
Fixes PR26589
Reviewers: aprantl
Differential Revision: http://reviews.llvm.org/D17211
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264429 91177308-0d34-0410-b5e6-96231b3b80d8
Bjorn Pettersson