These are cheaper ways of testing for the presence of code than generating the C++ code and testing it's empty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315872 91177308-0d34-0410-b5e6-96231b3b80d8
In type inference, an empty type set for a specific hw mode is not an
error. In earlier stages of the design it was, but having to use non-
parameterized types with target intrinsics necessarily led to type
contradictions: since the intrinsics used specific types, they were
only valid for a specific hw mode, and the resulting type set for other
modes ended up empty. To accommodate the existence of such intrinsics
individual type sets were allowed to be empty as long as not all sets
were empty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315858 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
GlobalISel and SelectionDAG require different code for the common
load/store predicates due to differences in the representation.
For example:
SelectionDAG: (load<signext,i8>:i32 GPR32:$addr) // The <> denote properties of the SDNode that are not printed in the DAG
GlobalISel: (G_SEXT:s32 (G_LOAD:s8 GPR32:$addr))
Even without that, differences in the IR (SDNode vs MachineInstr) require
differences in the C++ predicate.
This patch moves the implementation of the common load/store predicates
into tablegen so that it can handle these differences.
It's NFC for SelectionDAG since it emits equivalent code and it's NFC for
GlobalISel since the rules involving the relevant predicates are still
rejected by the importer.
Depends on D36618
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Subscribers: llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37443
Includes a partial revert of r315826 since this patch makes it necessary for
getPredCode() to return a std::string and getImmCode() should have the same
interface as getPredCode().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315841 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There's only a tablegen testcase for IntImmLeaf and not a CodeGen one
because the relevant rules are rejected for other reasons at the moment.
On AArch64, it's because there's an SDNodeXForm attached to the operand.
On X86, it's because the rule either emits multiple instructions or has
another predicate using PatFrag which cannot easily be supported at the
same time.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36569
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315761 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The purpose of this patch is to expose more information about ImmLeaf-like
PatLeaf's so that GlobalISel can learn to import them. Previously, ImmLeaf
could only be used to test int64_t's produced by sign-extending an APInt.
Other tests on immediates had to use the generic PatLeaf and extract the
constant using C++.
With this patch, tablegen will know how to generate predicates for APInt,
and APFloat. This will allow it to 'do the right thing' for both SelectionDAG
and GlobalISel which require different methods of extracting the immediate
from the IR.
This is NFC for SelectionDAG since the new code is equivalent to the
previous code. It's also NFC for FastISel because FastIselShouldIgnore is 1
for the ImmLeaf subclasses. Enabling FastIselShouldIgnore == 0 for these new
subclasses will require a significant re-factor of FastISel.
For GlobalISel, it's currently NFC because the relevant code to import the
affected rules is not yet present. This will be added in a later patch.
Depends on D36086
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: bjope, aemerson, rengolin, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36534
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315747 91177308-0d34-0410-b5e6-96231b3b80d8
I'm about to commit a patch that makes them necessary for getPredCode() and
it would be strange for getPredCode() and getImmCode() to require different
usage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315733 91177308-0d34-0410-b5e6-96231b3b80d8
Also add operator<< for use with raw_ostream to InfoByHwMode and its
derived classes.
Recommitting r313989 with the fix for unresolved references: explicitly
define the operator<< in namespace llvm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314004 91177308-0d34-0410-b5e6-96231b3b80d8
Add some member types to MachineValueTypeSet::const_iterator so that
iterator_traits can work with it.
Improve TableGen performance of -gen-dag-isel (motivated by X86 backend)
The introduction of parameterized register classes in r313271 caused the
matcher generation code in TableGen to run much slower, particularly so
in the unoptimized (debug) build. This patch recovers some of the lost
performance.
Summary of changes:
- Cache the set of legal types in TypeInfer::getLegalTypes. The contents
of this set do not change.
- Add LLVM_ATTRIBUTE_ALWAYS_INLINE to several small functions. Normally
this would not be necessary, but in the debug build TableGen is not
optimized, so this helps a little bit.
- Add an early exit from TypeSetByHwMode::operator== for the case when
one or both arguments are "simple", i.e. only have one mode. This
saves some time in GenerateVariants.
- Finally, replace the underlying storage type in TypeSetByHwMode::SetType
with MachineValueTypeSet based on std::array instead of std::set.
This significantly reduces the number of memory allocation calls.
I've done a number of experiments with the underlying type of InfoByHwMode.
The type is a map, and for targets that do not use the parameterization,
this map has only one entry. The best (unoptimized) performance, somewhat
surprisingly came from std::map, followed closely by std::unordered_map.
DenseMap was the slowest by a large margin.
Various hand-crafted solutions (emulating enough of the map interface
not to make sweeping changes to the users) did not yield any observable
improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313660 91177308-0d34-0410-b5e6-96231b3b80d8
The introduction of parameterized register classes in r313271 caused the
matcher generation code in TableGen to run much slower, particularly so
in the unoptimized (debug) build. This patch recovers some of the lost
performance.
Summary of changes:
- Cache the set of legal types in TypeInfer::getLegalTypes. The contents
of this set do not change.
- Add LLVM_ATTRIBUTE_ALWAYS_INLINE to several small functions. Normally
this would not be necessary, but in the debug build TableGen is not
optimized, so this helps a little bit.
- Add an early exit from TypeSetByHwMode::operator== for the case when
one or both arguments are "simple", i.e. only have one mode. This
saves some time in GenerateVariants.
- Finally, replace the underlying storage type in TypeSetByHwMode::SetType
with MachineValueTypeSet based on std::array instead of std::set.
This significantly reduces the number of memory allocation calls.
I've done a number of experiments with the underlying type of InfoByHwMode.
The type is a map, and for targets that do not use the parameterization,
this map has only one entry. The best (unoptimized) performance, somewhat
surprisingly came from std::map, followed closely by std::unordered_map.
DenseMap was the slowest by a large margin.
Various hand-crafted solutions (emulating enough of the map interface
not to make sweeping changes to the users) did not yield any observable
improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313647 91177308-0d34-0410-b5e6-96231b3b80d8
This replaces TableGen's type inference to operate on parameterized
types instead of MVTs, and as a consequence, some interfaces have
changed:
- Uses of MVTs are replaced by ValueTypeByHwMode.
- EEVT::TypeSet is replaced by TypeSetByHwMode.
This affects the way that types and type sets are printed, and the
tests relying on that have been updated.
There are certain users of the inferred types outside of TableGen
itself, namely FastISel and GlobalISel. For those users, the way
that the types are accessed have changed. For typical scenarios,
these replacements can be used:
- TreePatternNode::getType(ResNo) -> getSimpleType(ResNo)
- TreePatternNode::hasTypeSet(ResNo) -> hasConcreteType(ResNo)
- TypeSet::isConcrete -> TypeSetByHwMode::isValueTypeByHwMode(false)
For more information, please refer to the review page.
Differential Revision: https://reviews.llvm.org/D31951
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313271 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Tablegen already supports commutable instrinsics with more than 2 operands. There it just assumes the first two operands are commutable.
I plan to use this to improve the generation of FMA patterns in the X86 backend.
Reviewers: aymanmus, zvi, RKSimon, spatel, arsenm
Reviewed By: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D37430
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312464 91177308-0d34-0410-b5e6-96231b3b80d8
All patterns reside in a std::vector container, where new variants are added to it using the standard library's emplace_back function.
When calling this with a new element while there is no enough allocated space, a bigger space is allocated and all the old info in the small vector is copied to the newly allocated vector, then the old vector is freed.
The problem is that before doing this "copying", we take a reference of one of the elements in the old vector, and after the "copying" we add it to the new vector.
As the old vector is freed after the copying, the reference now does not point to a valid element.
Added new function to the API of CodeGenDAGPatterns class to return the same information as a copy in order to avoid this issue.
This was revealed in rL305465 that added many patterns and forced the reallocation of the vector which caused crashes in windows bots.
Differential Revision: https://reviews.llvm.org/D34341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306371 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch does a few things that should remove some copies around PatternsToMatch. These were noticed while reviewing code for D34341.
Change constructor to take Dstregs by value and move it into the class. Change one of the callers to add std::move to the argument so that it gets moved.
Make AddPatternToMatch take PatternToMatch by rvalue reference so we can move it into the PatternsToMatch vector. I believe we should have a implicit default move constructor available on PatternToMatch. I chose rvalue reference because both callers call it with temporaries already.
Reviewers: RKSimon, aymanmus, spatel
Reviewed By: aymanmus
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34411
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306251 91177308-0d34-0410-b5e6-96231b3b80d8
The variant generation for commutative/associative patterns would simply
delete the first output from the list assuming that it was identical to
the original pattern. This does not have to be the case, and a legitimate
variant could actually be removed that way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305556 91177308-0d34-0410-b5e6-96231b3b80d8
Internally both these methods just return the result of getValue on either a StringInit or a CodeInit object. In both cases this returns a StringRef pointing to a string allocated in the BumpPtrAllocator so its not going anywhere. So we can just pass that StringRef along.
This is a fairly naive patch that targets just the build failures caused by this change. There's additional work that can be done to avoid creating std::string at call sites that still think getValueAsString returns a std::string. I'll try to clean those up in future patches.
Differential Revision: https://reviews.llvm.org/D33710
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304325 91177308-0d34-0410-b5e6-96231b3b80d8
The IntrNoMem, IntrReadMem, IntrWriteMem, and IntrArgMemOnly intrinsic
properties differ from their corresponding LLVM IR attributes by specifying
that the intrinsic, in addition to its memory properties, has no other side
effects.
The IntrHasSideEffects flag used in combination with one of the memory flags
listed above, makes it possible to define an intrinsic such that its
properties at the CodeGen layer match its properties at the IR layer.
Patch by Tom Stellard
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301685 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we don't enforce that ISD::ANY_EXTEND, ZERO_EXTEND, SIGN_EXTEND, TRUNC, FP_ROUND, FP_EXTEND have the same number of elements(including scalar) between their input and output. Though we have them documented as such. Up until a few months ago x86 created nodes that violated this rule. That's all been fixed now, and we should enforce the rule going forward.
In order to do this we need to allow SDTCisSameNumEltsAs to support scalar types and not enforce being a vector. If one type is scalar we will force the other type to also be scalar.
Differential Revision: https://reviews.llvm.org/D30878
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297648 91177308-0d34-0410-b5e6-96231b3b80d8
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293359 91177308-0d34-0410-b5e6-96231b3b80d8
Teach X86InstrInfo::analyzeCompare() not to crash on CMP and SUB instructions
that take a global address operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286420 91177308-0d34-0410-b5e6-96231b3b80d8
Suspected to be the cause of a sanitizer-windows bot failure:
Assertion failed: isImm() && "Wrong MachineOperand accessor", file C:\b\slave\sanitizer-windows\llvm\include\llvm/CodeGen/MachineOperand.h, line 420
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286385 91177308-0d34-0410-b5e6-96231b3b80d8
A relocatable immediate is either an immediate operand or an operand that
can be relocated by the linker to an immediate, such as a regular symbol
in non-PIC code.
Start using relocImm for 32-bit and 64-bit MOV instructions, and for operands
of type "imm32_su". Remove a number of now-redundant patterns.
Differential Revision: https://reviews.llvm.org/D25812
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286384 91177308-0d34-0410-b5e6-96231b3b80d8
This splits out the intrinsic table such that generic intrinsics come
first and target specific intrinsics are grouped by target. From here
we can find out which target an intrinsic is for or differentiate
between generic and target intrinsics.
The motivation here is to make it easier to move target specific
intrinsic handling out of generic code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275575 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This property is used to mark an intrinsic that only writes to memory, but
neither reads from memory nor has other side effects.
An example where this is useful is the llvm.amdgcn.buffer.store.format.*
intrinsic, which corresponds to a store instruction that goes through a special
buffer descriptor rather than through a plain pointer.
With this property, the intrinsic should still be handled as having side
effects at the LLVM IR level, but machine scheduling can make smarter
decisions.
Reviewers: tstellarAMD, arsenm, joker.eph, reames
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18291
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266826 91177308-0d34-0410-b5e6-96231b3b80d8
