* More dense bytecode encoding for varargs calls (like printf)
* Eliminated the extremely old bytecode format. rev #0 is now 1.0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9220 91177308-0d34-0410-b5e6-96231b3b80d8
ModuleProvider, which has bad consequences in lli::callAsMain() which tries to
access that same Module*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9205 91177308-0d34-0410-b5e6-96231b3b80d8
Make insertFarJumpAtAddr() return void, because nothing uses its return value.
Remove some commented-out code.
Implement replaceMachineCodeForFunction() for SPARC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9203 91177308-0d34-0410-b5e6-96231b3b80d8
runJITOnFunction().
Add new method for recompiling and patching in new versions of functions,
recompileAndRelinkFunction().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9199 91177308-0d34-0410-b5e6-96231b3b80d8
Rename SlotCalculator::getValSlot() to SlotCalculator::getSlot(),
SlotCalculator::insertValue() to SlotCalculator::getOrCreateSlot(),
SlotCalculator::insertVal() to SlotCalculator::insertValue(), and
SlotCalculator::doInsertVal() to SlotCalculator::doInsertValue().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9190 91177308-0d34-0410-b5e6-96231b3b80d8
For now, we translate linkonce into weak linkage in the bytecode format because
we don't have enough bits to represent it. We will rev the bytecode version
soon anyways, so this will be fixed in the near future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9170 91177308-0d34-0410-b5e6-96231b3b80d8
this list (except use_size()) are constant time. Before the killUse method
(used whenever something stopped using a value) was linear time, and thus
very very slow for large programs.
This speeds GCCAS up _substantially_ on large programs: almost 2x for 176.gcc:
176.gcc: 77.07s -> 37.38s
177.mesa: 7.59s -> 5.57s
252.eon: 21.02s -> 19.52s (*)
253.perlbmk: 11.40s -> 13.05s
254.gap: 7.25s -> 7.42s
252.eon would speed up a whole lot more, but optimization time is being
dominated by the inlining pass, which needs to be fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9160 91177308-0d34-0410-b5e6-96231b3b80d8
* FunctionPassManager ctor now takes in a ModuleProvider
* run() materializes function before running passes on it
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9126 91177308-0d34-0410-b5e6-96231b3b80d8
* Add header comment
* Remove extraneous #includes
* Move the FileType enum into the GCC class
* The GCC class is not virtual.
* Move all of the "constructor" functions into the classes themselves
* Stop using cl::list as arguments, use std::vector instead (which cl::list
derives from)
* Improve comments
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9121 91177308-0d34-0410-b5e6-96231b3b80d8
X86/linux. :( The problem is that a signal delivered while the function
is executing could clobber the functions stack. This is a partial fix
for PR41.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9113 91177308-0d34-0410-b5e6-96231b3b80d8
break dominance relationships, and is otherwise bad. This fixes bug:
Inline/2003-10-13-AllocaDominanceProblem.ll. This also fixes miscompilation
of 3 176.gcc source files (reload1.c, global.c, flow.c)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9109 91177308-0d34-0410-b5e6-96231b3b80d8
jello statistic for this (just divide #-bytes-of-code-emitted by 4).
Rewrite head-of-file comment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9098 91177308-0d34-0410-b5e6-96231b3b80d8
multiple times. This reduces the time to construct post-dominance sets a LOT.
For example, optimizing perlbmk goes from taking 12.9894s to 1.4074s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9091 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix a nasty initializer ordering bug. Any only-CFG passes which registered
themselves before the CFGOnlyAnalysis vector initialized got forgotten and
thus got invalidated and recomputed.
In particular, in my compiled version of gccas, the Loop information pass was
being recomputed unnecessarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9074 91177308-0d34-0410-b5e6-96231b3b80d8
Only transform call sites in a setjmp'ing function which are reachable from
the setjmp. If the call dominates the setjmp (for example), the called
function cannot longjmp to the setjmp.
This dramatically reduces the number of invoke instructions created in some
large testcases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9066 91177308-0d34-0410-b5e6-96231b3b80d8
have a SINGLE backedge. This is useful to, for example, the -indvars pass.
This implements testcase LoopSimplify/single-backedge.ll and closes PR#34
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9065 91177308-0d34-0410-b5e6-96231b3b80d8
* Print floating point values using C99 hexadecimal style FP if possible.
This increases the number of floating point constants that may be emitted
inline, and improves precision for global variable initializers which
can not be emitted in integer form.
This fixes the Olden/Power benchmark with the CBE!!!!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9052 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix isFPCSafeToPrint to find more constants safe to print, which it was
failing because ftostr was padding with leading space characters.
* Scan the entire module for global constants instead of each function at a
time. This has the advantage of allowing us to emit constants at global
scope instead of function scope. This speeds FP programs quite a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9048 91177308-0d34-0410-b5e6-96231b3b80d8
Linux. This is consistent with what FreeBSD and Solaris both want.
This makes the JIT work on FreeBSD 5.1-RELEASE. Whee.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9045 91177308-0d34-0410-b5e6-96231b3b80d8
In lookupFunction():
Change to use "F" for Function argument instead of ancient "M".
Remove commented-out code.
Change to use GetAddressOfSymbol instead of dlsym.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9013 91177308-0d34-0410-b5e6-96231b3b80d8
are ordered by name, not by slot, so the previous solution wasn't any good.
On a large testcase, this reduces time to parse from 2.17s to 1.58s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9002 91177308-0d34-0410-b5e6-96231b3b80d8
changes:
* BytecodeReader::getType(...) used to return a null pointer
on error. This was only checked about half the time. Now we convert
it to throw an exception, and delete the half that checked for error.
This was checked in before, but psmith crashed and lost the change :(
* insertValue no longer returns -1 on error, so callers don't need to
check for it.
* Substantial rewrite of InstructionReader.cpp, to use more efficient,
simpler, data structures. This provides another 5% speedup. This also
makes the code much easier to read and understand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8984 91177308-0d34-0410-b5e6-96231b3b80d8
simplifies the control flow a bit. This provides a small (~3%) speedup,
but it's primarily a cleanup exercise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8983 91177308-0d34-0410-b5e6-96231b3b80d8
new, simpler, ForwardReferences data structure. This is just the first
simple replacement, subsequent changes will improve the code more.
This simple change improves the performance of loading a file from HDF5
(contributed by Bill) from 2.36s to 1.93s, a 22% improvement. This
presumably has to do with the fact that we only create ONE placeholder for
a particular forward referenced values, and also may be because the data
structure is much simpler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8979 91177308-0d34-0410-b5e6-96231b3b80d8
in the bytecode parser. Before we tried to shoehorn basic blocks into the
"getValue" code path with other types of values. For a variety of reasons
this was a bad idea, so this patch separates it out into its own data structure.
This simplifies the code, makes it fit in 80 columns, and is also much faster.
In a testcase provided by Bill, which has lots of PHI nodes, this patch speeds
up bytecode parsing from taking 6.9s to taking 2.32s. More speedups to
follow later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8977 91177308-0d34-0410-b5e6-96231b3b80d8
to avoid reprocessing PHI nodes needlessly. This speeds up the big bad PHI
testcase 43%: from 104.9826 to 73.5157s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8964 91177308-0d34-0410-b5e6-96231b3b80d8
of a test that Bill Wendling sent me from 228.5s to 105s. Obviously there is
more improvement to be had, but this is a nice speedup which should be "felt"
by many programs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8962 91177308-0d34-0410-b5e6-96231b3b80d8
and TargetInstrDescriptor::ImplicitUses to always point to a null
terminated array and never be null. So there is no need to check for
pointer validity when iterating over those sets. Code that looked
like:
if (const unsigned* AS = TID.ImplicitDefs) {
for (int i = 0; AS[i]; ++i) {
// use AS[i]
}
}
was changed to:
for (const unsigned* AS = TID.ImplicitDefs; *AS; ++AS) {
// use *AS
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8960 91177308-0d34-0410-b5e6-96231b3b80d8
of callees between executions.
On eon, in release mode, this changes the inliner from taking 11.5712s
to taking 2.2066s. In debug mode, it went from taking 14.4148s to
taking 7.0745s. In release mode, this is a 24.7% speedup of gccas, in
debug mode, it's a total speedup of 11.7%.
This also makes it slightly more aggressive. This could be because we
are not judging the size of the functions quite as accurately as before.
When we start looking at the performance of the generated code, this can
be investigated further.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8893 91177308-0d34-0410-b5e6-96231b3b80d8
Running the inliner on 252.eon used to take 48.4763s, now it takes 14.4148s.
In release mode, it went from taking 25.8741s to taking 11.5712s.
This also fixes a FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8890 91177308-0d34-0410-b5e6-96231b3b80d8
"minimal" SSA form (in other words, it doesn't insert dead PHIs). This
speeds up the mem2reg pass very significantly because it doesn't have to
do a lot of frivolous work in many common cases.
In the 252.eon function I have been playing with, this doesn't even insert
the 120 PHI nodes that it used to which were trivially dead (in the process
of promoting 356 alloca instructions overall). This speeds up the mem2reg
pass from 1.2459s to 0.1284s. More significantly, the DCE pass used to take
2.4138s to remove the 120 dead PHI nodes that mem2reg constructed, now it
takes 0.0134s (which is the time to scan the function and decide that there
is nothing dead). So overall, on this one function, we speed things up a
total of 3.5179s, which is a 24.8x speedup! :)
This change is tested by the Mem2Reg/2003-10-05-DeadPHIInsertion.ll test,
which now passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8884 91177308-0d34-0410-b5e6-96231b3b80d8
basic block. This is amazingly common in code generated by the C/C++ front-ends.
This change makes it not have to insert ANY phi nodes, whereas before it would insert
a ton of dead ones which DCE would have to clean up.
Thus, this fix improves compile-time performance of these trivial allocas in two ways:
1. It doesn't have to do the walking and book-keeping for renaming
2. It does not insert dead phi nodes for them which would have to
subsequently be cleaned up.
On my favorite testcase from 252.eon, this special case handles 305 out of
356 promoted allocas in the function. It speeds up the mem2reg pass from 7.5256s
to 1.2505s. It inserts 677 fewer dead PHI nodes, which speeds up a subsequent
-dce pass from 18.7524s to 2.4806s.
There are still 120 trivially dead PHI nodes being inserted for variables used
in multiple basic blocks, but they are not handled by this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8881 91177308-0d34-0410-b5e6-96231b3b80d8
This reduces the time to verify a function from eon with a large number of
large PHI nodes from 22996s (6.38 hours) to 10.5499s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8866 91177308-0d34-0410-b5e6-96231b3b80d8
*** Revamp the code which handled unreachable code in the function. Now the
code is much more efficient for high-degree basic blocks, such as those
that occur in the 252.eon SPEC benchmark.
For the interested, the time to promote a SINGLE alloca in _ZN7mrScene4ReadERSi
function used to be > 3.5s. Now it is < .075s. The function has a LOT of
allocas in it, so it appeared to be infinite looping, this should make it much
nicer. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8863 91177308-0d34-0410-b5e6-96231b3b80d8
work-list of value definitions. This allows elimination of the explicit
'iterative' step of the algorithm, and also reuses temporary memory better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8861 91177308-0d34-0410-b5e6-96231b3b80d8
* Do not insert a new entry into NewPhiNodes during the rename pass if there are no PHIs in a block.
* Do not compute WriteSets in parallel
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8858 91177308-0d34-0410-b5e6-96231b3b80d8
* Eliminate the KillList instance variable, instead, just delete loads and
stores as they are "renamed", and delete allocas when they are done
* Make the 'visited' set an instance variable to avoid passing it on the stack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8857 91177308-0d34-0410-b5e6-96231b3b80d8
constants as necessary due to type resolution. With this change, the
following spec benchmarks now link: 176.gcc, 177.mesa, 252.eon,
253.perlbmk, & 300.twolf. IOW, all SPEC INT and FP benchmarks now link.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8853 91177308-0d34-0410-b5e6-96231b3b80d8
machinery. This dramatically simplifies how things works, removes irritating
little corner cases, and overall improves speed and reliability.
Highlights of this change are:
1. The exponential algorithm built into the code is now gone. For example
the time to disassemble one bytecode file from the mesa benchmark went
from taking 12.5s to taking 0.16s.
2. The linker bugs should be dramatically reduced. The one remaining bug
has to do with constant handling, which I actually introduced in
"union-find" checkins.
3. The code is much easier to follow, as a result of fewer special cases.
It's probably also smaller. yaay.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8842 91177308-0d34-0410-b5e6-96231b3b80d8
This makes use of the new PATypeHolder's to keep types from being deleted
prematurely, instead of the wierd "self reference" garbage. This is easier
to understand and more efficient as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8834 91177308-0d34-0410-b5e6-96231b3b80d8
significantly more complete. Instead, just make DerivedType's AbstractTypeUser's,
and make Value contain a PATypeHolder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8828 91177308-0d34-0410-b5e6-96231b3b80d8
2. I think the caller of LinkFiles() should not ignore a true return value.
(If you have a good reason why it ought to, feel free to revert
this. It's just something that's been bugging me for a while.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8760 91177308-0d34-0410-b5e6-96231b3b80d8
* Removed space between function name and its argument list
* Removed space between '&' and variable name
* Removed empty comment lines: `//'
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8750 91177308-0d34-0410-b5e6-96231b3b80d8
* Kill unused ALIN_PTRS #define
* Set the error string if user passed it in to be compatible with former API
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8701 91177308-0d34-0410-b5e6-96231b3b80d8
Shorten the markSuggestedColorUsable method.
Add a switch for saving reg. alloc. state (coming soon).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8697 91177308-0d34-0410-b5e6-96231b3b80d8
* Instead of a #define, use inline function
* Fix the name on the #define, errr... now inline function to be more logical:
it doesn't CHECK the alignment, it PERFORMS the alignment
* To get string name of a Type*, use getDescription(), not getName()
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8683 91177308-0d34-0410-b5e6-96231b3b80d8
* Make sure we align the buffer we're given
* Do not let exceptions propagate when the caller asks for a Module*
* Add doxygenified comments to wrapper functions
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8682 91177308-0d34-0410-b5e6-96231b3b80d8
because it can add a module ID which we do not have at this time.
* Check to see if the module has been initialized when materializing it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8674 91177308-0d34-0410-b5e6-96231b3b80d8
- no more passing around a string pointer to set errors
- no more returning booleans and checking for errors, we use C++ exceptions
* Broke functionality into 2 new classes, one reads from file, one from a stream
* Implemented lazy function streaming - the parser can read in a function at-a-time
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8671 91177308-0d34-0410-b5e6-96231b3b80d8
... by making sure to update PHI nodes to take into consideration the
extra edges we get if we inline a call instruction through an invoke.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8664 91177308-0d34-0410-b5e6-96231b3b80d8
(I also zapped printMachineCode() and printLabel() at the previous checkin,
but forgot to mention it.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8646 91177308-0d34-0410-b5e6-96231b3b80d8
PhyRegAlloc.cpp:
Don't include TargetMachine.h or TargetRegInfo.h, because these are provided
by PhyRegAlloc.h.
Merge class RegisterAllocator into class PhyRegAlloc.
Simplify & move ctor, dtor to PhyRegAlloc.h.
Make some of PhyRegAlloc's reference members into pointer members,
so they can be more easily messed with.
MarkAllocatedRegs() becomes a member method, with fewer args.
PhyRegAlloc.h:
Include Pass.h, TargetMachine.h and TargetRegInfo.h. Don't declare
TargetRegInfo forward.
Give AddedInstrns the obvious clear() method.
Make some of PhyRegAlloc's reference members into pointer members,
so they can be more easily messed with.
Add prototype for markAllocatedRegs().
Remove unused inline void constructLiveRanges().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8641 91177308-0d34-0410-b5e6-96231b3b80d8
