On sandy bridge (PR17654) we now get
vpxor %xmm1, %xmm1, %xmm1
vpunpckhbw %xmm1, %xmm0, %xmm2
vpunpcklbw %xmm1, %xmm0, %xmm0
vinsertf128 $1, %xmm2, %ymm0, %ymm0
On haswell it's a simple
vpmovzxbw %xmm0, %ymm0
There is a maze of duplicated and dead transforms and patterns in this
area. Remove the dead custom lowering of zext v8i16 to v8i32, that's
already handled by LowerAVXExtend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193262 91177308-0d34-0410-b5e6-96231b3b80d8
- Skip instructions added in prolog. For specific targets, prolog may
insert helper function calls (e.g. _chkstk will be called when
there're more than 4K bytes allocated on stack). However, these
helpers don't use/def YMM/XMM registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193261 91177308-0d34-0410-b5e6-96231b3b80d8
The SelectionDAGBuilder was promoting vector kernel arguments to legal
types, but this won't work for R600 and SI since kernel arguments are
stored in memory and can't be promoted. In order to handle vector
arguments correctly we need to look at the original types from the LLVM IR
function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193215 91177308-0d34-0410-b5e6-96231b3b80d8
The set of circumstances where the writeback register is allowed to be in the
list of registers is rather baroque, but I think this implements them all on
the assembly parsing side.
For disassembly, we still warn about an ARM-mode LDM even if the architecture
revision is < v7 (the required architecture information isn't available). It's
a silly instruction anyway, so hopefully no-one will mind.
rdar://problem/15223374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193185 91177308-0d34-0410-b5e6-96231b3b80d8
The AMDGPUIndirectAddressing pass was previously responsible for
lowering private loads and stores to indirect addressing instructions.
However, this pass was buggy and way too complicated. The only
advantage it had over the new simplified code was that it saved one
instruction per direct write to private memory. This optimization
likely has a minimal impact on performance, and we may be able
to duplicate it using some other transformation.
For the private address space, we now:
1. Lower private loads/store to Register(Load|Store) instructions
2. Reserve part of the register file as 'private memory'
3. After regalloc lower the Register(Load|Store) instructions to
MOV instructions that use indirect addressing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193179 91177308-0d34-0410-b5e6-96231b3b80d8
These branches have a 16-bit offset (R_MIPS_PC16).
List of conditional branch instructions:
bnz.{b,h,w,d}
bnz.v
bz.{b,h,w,d}
bz.v
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193157 91177308-0d34-0410-b5e6-96231b3b80d8
the instruction defenitions and ISEL reflect this.
Prior to this patch these instructions took an i32i8imm, and the high bits were
dropped during encoding. This led to incorrect behavior for shifts by
immediates higher than 255. This patch fixes that issue by detecting large
immediate shifts and returning constant zero (for logical shifts) or capping
the shift amount at an encodable value (for arithmetic shifts).
Fixes <rdar://problem/14968098>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193096 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are logically related as they allow read/write of MSA control registers.
Currently MSA control registers are emitted by number but hopefully that will change as soon
as GAS starts accepting them by name as that would make the assembly easier to read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193078 91177308-0d34-0410-b5e6-96231b3b80d8
The second parameter of the SLD intrinsic is the number of columns (GPR) to
slide left the source array.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193076 91177308-0d34-0410-b5e6-96231b3b80d8
This is another (final?) stab at making us able to parse our own asm output
on Windows.
Symbols on Windows often contain @'s and ?'s in their names. Our asm parser
didn't like this. ?'s were not allowed, and @'s were intepreted as trying to
reference PLT/GOT/etc.
We can't just add quotes around the bad names, since e.g. for MinGW, we use gas
to assemble, and it doesn't like quotes in some places (notably in .def
directives).
This commit makes us allow ?'s in symbol names, and @'s in symbol names for MS
assembly.
Differential Revision: http://llvm-reviews.chandlerc.com/D1978
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193000 91177308-0d34-0410-b5e6-96231b3b80d8
This caused the clang-native-mingw32-win7 buildbot to break.
The assembler was complaining about the following lines that were showing up
in the asm for CrashRecoveryContext.cpp:
movl $"__ZL16ExceptionHandlerP19_EXCEPTION_POINTERS@4", 4(%eax)
calll "_AddVectoredExceptionHandler@8"
.def "__ZL16ExceptionHandlerP19_EXCEPTION_POINTERS@4";
"__ZL16ExceptionHandlerP19_EXCEPTION_POINTERS@4":
calll "_RemoveVectoredExceptionHandler@4"
Reverting for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192940 91177308-0d34-0410-b5e6-96231b3b80d8
This commit implements the correct lowering of the
COPY_STRUCT_BYVAL_I32 pseudo-instruction for thumb1 targets.
Previously, the lowering of COPY_STRUCT_BYVAL_I32 generated the
post-increment forms of ldr/ldrh/ldrb instructions. Thumb1 does not
have the post-increment form of these instructions so the generated
assembly contained invalid instructions.
Passing the generated assembly to gcc caused it to complain with an
error like this:
Error: cannot honor width suffix -- `ldrb r3,[r0],#1'
and the integrated assembler would generate an object file with an
invalid instruction encoding.
This commit contains a small test case that demonstrates the problem
with thumb1 targets as well as an expanded test case that more
throughly tests the lowering of byval struct passing for arm,
thumb1, and thumb2 targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192916 91177308-0d34-0410-b5e6-96231b3b80d8
This commit refactors the lowering of the COPY_STRUCT_BYVAL_I32
pseudo-instruction in the ARM backend. We introduce a new helper
class that encapsulates all of the operations needed during the
lowering. The operations are implemented for each subtarget in
different subclasses. Currently only arm and thumb2 subtargets are
supported.
This refactoring was done to easily implement support for thumb1
subtargets. This initial patch does not add support for thumb1, but
is only a refactoring. A follow on patch will implement the support
for thumb1 subtargets.
No intended functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192915 91177308-0d34-0410-b5e6-96231b3b80d8
All of the Core API functions have versions which accept explicit context, in
addition to ones which work on global context. This commit adds functions
which accept explicit context to the Target API for consistency.
Patch by Peter Zotov
Differential Revision: http://llvm-reviews.chandlerc.com/D1912
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192913 91177308-0d34-0410-b5e6-96231b3b80d8
class. The instruction class includes the signed saturating doubling
multiply-add long, signed saturating doubling multiply-subtract long, and
the signed saturating doubling multiply long instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192908 91177308-0d34-0410-b5e6-96231b3b80d8
These were present in a previous version of the MSA spec but are not
present in the published version. There is no hardware that uses these
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192888 91177308-0d34-0410-b5e6-96231b3b80d8
Define these three instructions in alphabetical order (like the rest of the
file).
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192880 91177308-0d34-0410-b5e6-96231b3b80d8
