FPROUND_F80_F32, FPROUND_PPCF128_F32,
FPROUND_F80_F64, FPROUND_PPCF128_F64
Support for soften float fp_round operands is added, Mips
needs this to round f64->f32.
Also added support to soften float FABS result, Mips doesn't
support double fabs results while in 'single float only' mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54484 91177308-0d34-0410-b5e6-96231b3b80d8
- Add a basic machine-level dead block eliminator.
These two have to go together, since many other parts of the code generator are unable to handle the unreachable blocks otherwise created.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54333 91177308-0d34-0410-b5e6-96231b3b80d8
switches use the binary search algorithm) for
environments that don't support it. PPC64 JIT
is such an environment; turn the flag on for that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54248 91177308-0d34-0410-b5e6-96231b3b80d8
to different address spaces. This alters the naming scheme for those
intrinsics, e.g., atomic.load.add.i32 => atomic.load.add.i32.p0i32
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54195 91177308-0d34-0410-b5e6-96231b3b80d8
which is represented in codegen as an 'and' operation. This matches them
with movz instructions, instead of leaving them to be matched by and
instructions with an immediate field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54147 91177308-0d34-0410-b5e6-96231b3b80d8
a new ilist_node class, and remove them. Unlike alist_node,
ilist_node doesn't attempt to manage storage itself, so it avoids
the associated problems, including being opaque in gdb.
Adjust the Recycler class so that it doesn't depend on alist_node.
Also, change it to use explicit Size and Align parameters, allowing
it to work when the largest-sized node doesn't have the greatest
alignment requirement.
Change MachineInstr's MachineMemOperand list from a pool-backed
alist to a std::list for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54146 91177308-0d34-0410-b5e6-96231b3b80d8
parallel its analogue, Value::value_use_iterator. The operator* method
now returns the user, rather than the use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54127 91177308-0d34-0410-b5e6-96231b3b80d8
multiple-valued return values, so that the name CreateRet is just for
creating plain ret statements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54053 91177308-0d34-0410-b5e6-96231b3b80d8
and knowledge of PseudoSourceValues. This unfortunately isn't sufficient to allow
constants to be rematerialized in PIC mode -- the extra indirection is a
complication.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54000 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the GetResultInst instruction. It is still accepted in LLVM assembly
and bitcode, where it is now auto-upgraded to ExtractValueInst. Also, remove
support for return instructions with multiple values. These are auto-upgraded
to use InsertValueInst instructions.
The IRBuilder still accepts multiple-value returns, and auto-upgrades them
to InsertValueInst instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53941 91177308-0d34-0410-b5e6-96231b3b80d8
live intervals itself to use an instruction count approximation that is
not affected by inserting empty indices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53937 91177308-0d34-0410-b5e6-96231b3b80d8
folded. Remove code that handled the case where they aren't
folded, and remove bitcode reader/writer support for them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53887 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG graph writer to make use of them. Now, nodes with multiple
values are displayed as such, with incoming edges pointing to the
specific value they use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53875 91177308-0d34-0410-b5e6-96231b3b80d8
that include useful information like the name of the
block being viewed and the current phase of compilation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53872 91177308-0d34-0410-b5e6-96231b3b80d8
used for the graph "title" and the graph "label", as there
are differences in interpretation of these strings
between viewers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53871 91177308-0d34-0410-b5e6-96231b3b80d8
generic SDNode's (nodes with their own constructors
should do sanity checking in the constructor). Add
sanity checks for BUILD_VECTOR and fix all the places
that were producing bogus BUILD_VECTORs, as found by
"make check". My favorite is the BUILD_VECTOR with
only two operands that was being used to build a
vector with four elements!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53850 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a leak that this turned up in LowerSubregs.cpp.
And, comment a leak in LiveIntervalAnalysis.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53746 91177308-0d34-0410-b5e6-96231b3b80d8
replacement of multiple values. This is slightly more efficient
than doing multiple ReplaceAllUsesOfValueWith calls, and theoretically
could be optimized even further. However, an important property of this
new function is that it handles the case where the source value set and
destination value set overlap. This makes it feasible for isel to use
SelectNodeTo in many very common cases, which is advantageous because
SelectNodeTo avoids a temporary node and it doesn't require CSEMap
updates for users of values that don't change position.
Revamp MorphNodeTo, which is what does all the work of SelectNodeTo, to
handle operand lists more efficiently, and to correctly handle a number
of corner cases to which its new wider use exposes it.
This commit also includes a change to the encoding of post-isel opcodes
in SDNodes; now instead of being sandwiched between the target-independent
pre-isel opcodes and the target-dependent pre-isel opcodes, post-isel
opcodes are now represented as negative values. This makes it possible
to test if an opcode is pre-isel or post-isel without having to know
the size of the current target's post-isel instruction set.
These changes speed up llc overall by 3% and reduce memory usage by 10%
on the InstructionCombining.cpp testcase with -fast and -regalloc=local.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53728 91177308-0d34-0410-b5e6-96231b3b80d8
difference in purpose of TargetInstrInfo and TargetInstrDesc,
which isn't immediately obvious from the name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53683 91177308-0d34-0410-b5e6-96231b3b80d8
use a timer group for the timers in SelectionDAGISel. Also,
Split scheduling out from emitting, to give each their own
timer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53476 91177308-0d34-0410-b5e6-96231b3b80d8
SINT_TO_FP libcall plus additional operations:
it might as well be a direct UINT_TO_FP libcall.
So only turn it into an SINT_TO_FP if the target
has special handling for SINT_TO_FP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53461 91177308-0d34-0410-b5e6-96231b3b80d8
in Value, to make use of some otherwise unused space. Use this
field to shrink LoadSDNode and StoreSDNode by moving the
addressing mode and ext/trunc fields there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53422 91177308-0d34-0410-b5e6-96231b3b80d8
Lack of these caused a bootstrap failure with Fortran
on x86-64 with LegalizeTypes turned on. While there,
be nice to 16 bit machines and support expansion of
i32 too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53408 91177308-0d34-0410-b5e6-96231b3b80d8
- Change local register allocator to use the new isRegReDefinedByTwoAddr instead of reinventing the wheel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53394 91177308-0d34-0410-b5e6-96231b3b80d8
makes their special-case checks of use_size() less beneficial,
so remove them. This eliminates all but one use of use_size(),
which is in AssignTopologicalOrder, which uses it only once for
each node, and so can reasonably afford to recompute it, as
this allows the UsesSize field of SDNode to be removed
altogether.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53377 91177308-0d34-0410-b5e6-96231b3b80d8
class, and store IsVolatile and Alignment in a more compact form.
This makes AtomicSDNode slightly larger, but it shrinks LoadSDNode
and StoreSDNode, which are much more common and are the largest of
the SDNode subclasses. Also, this lets the isVolatile() and
getAlignment() accessors be non-virtual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53361 91177308-0d34-0410-b5e6-96231b3b80d8
bc files for modules with a target triple that indicates they are for
darwin. The reader unconditionally handles this, and the writer could
turn this on for more targets if we care.
This change has two benefits for darwin:
1) it allows us to encode the cpu type of the file in an easy to read
place that doesn't require decoding the bc file.
2) it works around a bug (IMO) in darwin's AR where it is incapable of
handling files that are not a multiple of 8 bytes long. BC files
are only guaranteed to be multiples of 4 bytes long.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53275 91177308-0d34-0410-b5e6-96231b3b80d8
available to getAtomic in addition to just getLoad and getStore,
to prevent MachineMemOperands with 0 alignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53261 91177308-0d34-0410-b5e6-96231b3b80d8
MachineMemOperands. The pools are owned by MachineFunctions.
This drastically reduces the number of calls to malloc/free made
during the "Emit" phase of scheduling, as well as later phases
in CodeGen. Combined with other changes, this speeds up the
"instruction selection" phase of CodeGen by 10% in some cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53212 91177308-0d34-0410-b5e6-96231b3b80d8
and reused across SelectionDAGs.
This drastically reduces the number of calls to malloc/free made during
instruction selection, and improves memory locality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53211 91177308-0d34-0410-b5e6-96231b3b80d8
for handling bookkeeping for deleted objects, as well as the alist class
template, for keeping lists of objects allocated from Recyclers, and some
related utilities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53210 91177308-0d34-0410-b5e6-96231b3b80d8
properly track dead nodes that are on the original SDNode's operand
list but not the new one, and have no other uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53201 91177308-0d34-0410-b5e6-96231b3b80d8
simple const SDOperand*, which is what's usually needed.
For AddNodeIDOperands, which is small, just duplicate the function to
accept an SDUse*.
For SelectionDAG::getNode - Add an overload that accepts SDUse* that
copies the operands into a temporary SDOperand array, but also has
special-case checks for 0 through 3 operands to avoid the copy in
the common cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53183 91177308-0d34-0410-b5e6-96231b3b80d8
that fixed problems in EmitStackConvert where the source and target type
have different alignment by creating a stack slot with the max
alignment of source and target type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53150 91177308-0d34-0410-b5e6-96231b3b80d8
hook for each way in which a result type can be
legalized (promotion, expansion, softening etc),
just use one: ReplaceNodeResults, which returns
a node with exactly the same result types as the
node passed to it, but presumably with a bunch of
custom code behind the scenes. No change if the
new LegalizeTypes infrastructure is not turned on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53137 91177308-0d34-0410-b5e6-96231b3b80d8
moves in order to get correct debug info. Since
I can't imagine how any target could possibly
be any different, I've just stripped out the
option: now all the world's like Darwin!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53134 91177308-0d34-0410-b5e6-96231b3b80d8
- Also remove LiveVariables::instructionChanged, etc. Replace all calls with cheaper calls which update VarInfo kill list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53097 91177308-0d34-0410-b5e6-96231b3b80d8
- CommuteInstruction copies kill / dead markers over to new instruction. So use replaceKillInstruction instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53061 91177308-0d34-0410-b5e6-96231b3b80d8
Also, if LV isn't around, then TwoAddr doesn't need to be updating flags, since they won't have been set in the first place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53058 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG::SelectNodeTo in the instruction selector. This
updates existing nodes in place instead of creating new ones.
Go back to selecting ISD::DBG_LABEL nodes into
TargetInstrInfo::DBG_LABEL nodes instead of leaving them
unselected, now that SelectNodeTo allows us to update them
in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53057 91177308-0d34-0410-b5e6-96231b3b80d8
to be passed the list of value types, and use this
where appropriate. Inappropriate places are where
the value type list is already known and may be
long, in which case the existing method is more
efficient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53035 91177308-0d34-0410-b5e6-96231b3b80d8
- Use a more accurate heuristic for the size of the hashtable.
- Use bitwise and instead of modulo since the size is a power of two.
- Use new[] instead of malloc().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52951 91177308-0d34-0410-b5e6-96231b3b80d8
