a CLANG_LIBDIR_SUFFIX variable. This is necessary before I can add
support for using that variable to CMake and the C++ code in Clang, and
the autoconf build system does all substitutions in the LLVM tree.
As mentioned before, I'm not planning to add actual multilib support to
the autoconf build, just enough stubs for it to keep playing nicely with
the CMake build once that one has support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224922 91177308-0d34-0410-b5e6-96231b3b80d8
For this to work, we have to encode it in the build variables and use it
from llvm-config.cpp. I've tried to do this reasonably cleanly, but the
code for llvm-config.cpp is pretty strange. However, with this,
llvm-config stops giving the wrong answer when using LLVM_LIBDIR_SUFFIX.
Note that the configure+make build just sets this to an empty string as
that build system has zero support for multilib of any form. I'm not
planning to add support there either, but this should leave a path for
anyone that wanted to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224921 91177308-0d34-0410-b5e6-96231b3b80d8
that is used by other projects to build against LLVM. This will allow
subsequent patches to them to use LLVM_LIBDIR_SUFFIX, both when built as
part of the larger LLVM build an as part of a standalone build against
an installed set of LLVM libraries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224920 91177308-0d34-0410-b5e6-96231b3b80d8
*numerous* places where it was missing in the CMake build. The primary
change here is that the suffix is now actually used for all of the lib
directories in the LLVM project's CMake. The various subprojects still
need similar treatment.
This is the first of a series of commits to try to make LLVM's cmake
effective in a multilib Linux installation. I don't think many people
are seriously using this variable so I'm hoping the fallout will be
minimal. A somewhat unfortunate consequence of the nature of these
commits is that until I land all of them, they will in part make the
brokenness of our multilib support more apparant. At the end, things
should actually work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224919 91177308-0d34-0410-b5e6-96231b3b80d8
The else case ResultReg was not checked for validity.
To my surprise, this case was not hit in any of the
existing test cases. This includes a new test cases
that tests this path.
Also drop the `target triple` declaration from the
original test as suggested by H.J. Lu, because
apparently with it the test won't be run on Linux
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224901 91177308-0d34-0410-b5e6-96231b3b80d8
If the control flow is modelling an if-statement where the only instruction in
the 'then' basic block (excluding the terminator) is a call to cttz/ctlz,
CodeGenPrepare can try to speculate the cttz/ctlz call and simplify the control
flow graph.
Example:
\code
entry:
%cmp = icmp eq i64 %val, 0
br i1 %cmp, label %end.bb, label %then.bb
then.bb:
%c = tail call i64 @llvm.cttz.i64(i64 %val, i1 true)
br label %end.bb
end.bb:
%cond = phi i64 [ %c, %then.bb ], [ 64, %entry]
\code
In this example, basic block %then.bb is taken if value %val is not zero.
Also, the phi node in %end.bb would propagate the size-of in bits of %val
only if %val is equal to zero.
With this patch, CodeGenPrepare will try to hoist the call to cttz from %then.bb
into basic block %entry only if cttz is cheap to speculate for the target.
Added two new hooks in TargetLowering.h to let targets customize the behavior
(i.e. decide whether it is cheap or not to speculate calls to cttz/ctlz). The
two new methods are 'isCheapToSpeculateCtlz' and 'isCheapToSpeculateCttz'.
By default, both methods return 'false'.
On X86, method 'isCheapToSpeculateCtlz' returns true only if the target has
LZCNT. Method 'isCheapToSpeculateCttz' only returns true if the target has BMI.
Differential Revision: http://reviews.llvm.org/D6728
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224899 91177308-0d34-0410-b5e6-96231b3b80d8
Masked vector intrinsics are a part of common LLVM IR, but they are really supported on AVX2 and AVX-512 targets. I added a code that translates masked intrinsic for all other targets. The masked vector intrinsic is converted to a chain of scalar operations inside conditional basic blocks.
http://reviews.llvm.org/D6436
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224897 91177308-0d34-0410-b5e6-96231b3b80d8
Determining the address of a TLS variable results in a function call in
certain TLS models. This means that a simple ICmpInst might actually
result in invalidating the CTR register.
In such cases, do not attempt to rely on the CTR register for loop
optimization purposes.
This fixes PR22034.
Differential Revision: http://reviews.llvm.org/D6786
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224890 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Consider the following IR:
%3 = load i8* undef
%4 = trunc i8 %3 to i1
%5 = call %jl_value_t.0* @foo(..., i1 %4, ...)
ret %jl_value_t.0* %5
Bools (that are the result of direct truncs) are lowered as whatever
the argument to the trunc was and a "and 1", causing the part of the
MBB responsible for this argument to look something like this:
%vreg8<def,tied1> = AND8ri %vreg7<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg8,%vreg7
Later, when the load is lowered, it will insert
%vreg15<def> = MOV8rm %vreg14, 1, %noreg, 0, %noreg; mem:LD1[undef] GR8:%vreg15 GR64:%vreg14
but remember to (at the end of isel) replace vreg7 by vreg15. Now for
the bug. In fast isel lowering, we mistakenly mark vreg8 as the result
of the load instead of the trunc. This adds a fixup to have
vreg8 replaced by whatever the result of the load is as well, so
we end up with
%vreg15<def,tied1> = AND8ri %vreg15<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg15
which is an SSA violation and causes problems later down the road.
This fixes PR21557.
Test Plan: Test test case from PR21557 is added to the test suite.
Reviewers: ributzka
Reviewed By: ributzka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6245
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224884 91177308-0d34-0410-b5e6-96231b3b80d8
A multiply cannot unsigned wrap if there are bitwidth, or more, leading
zero bits between the two operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224849 91177308-0d34-0410-b5e6-96231b3b80d8
We already utilize this logic for reducing overflow intrinsics, it makes
sense to reuse it for normal multiplies as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224847 91177308-0d34-0410-b5e6-96231b3b80d8
When materializing constant i1 values, they must be zero extended. We represent
i1 values as [0, 1], not [0, -1], in i32 registers. As it turns out, this code
path was dead for i1 values prior to r216006 (which is why this did not manifest in
miscompiles until recently).
Fixes -O0 self-hosting on PPC64/Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224842 91177308-0d34-0410-b5e6-96231b3b80d8
It's possible to have a prior definition of a symbol in module asm.
Raise an error instead of crashing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224828 91177308-0d34-0410-b5e6-96231b3b80d8
Bob Wilson pointed out the unnecessary checks that had been committed to the
instruction check predicates. The check was meant to ensure that the check was
not accidentally applied to non-ARM instructions. This is better served as an
assertion rather than a condition check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224825 91177308-0d34-0410-b5e6-96231b3b80d8
.set directives may be overridden by other .set directives as well as
label definitions.
This fixes PR22019.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224811 91177308-0d34-0410-b5e6-96231b3b80d8
Correct the line information generation for preprocessed assembly. Although we
tracked the source information for the macro instantiation, we failed to account
for the fact that we were instantiating a macro, which is populated into a new
buffer and that the line information would be relative to the definition rather
than the actual instantiation location. This could cause the line number
associated with the statement to be very high due to wrapping of the difference
calculated for the preprocessor line information emitted into the stream.
Properly calculate the line for the macro instantiation, referencing the line
where the macro is actually used as GCC/gas do.
The test case uses x86, though the same problem exists on any other target using
the LLVM IAS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224810 91177308-0d34-0410-b5e6-96231b3b80d8
This removes a hardcoded list of instructions in the CodeEmitter. Eventually I intend to remove the predicates on the affected instructions since in any given mode two of them are valid if we supported addr32/addr16 prefixes in the assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224809 91177308-0d34-0410-b5e6-96231b3b80d8
This function constructs the main liverange by merging all subranges if
subregister liveness tracking is available. This should be slightly
faster to compute instead of performing the liveness calculation again
for the main range. More importantly it avoids cases where the main
liverange would cover positions where no subrange was live. These cases
happened for partial definitions where the actual defined part was dead
and only the undefined parts used later.
The register coalescing requires that every part covered by the main
live range has at least one subrange live.
I also expect this function to become usefull later for places where the
subranges are modified in a way that it is hard to correctly fix the
main liverange in the machine scheduler, we can simply reconstruct it
from subranges then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224806 91177308-0d34-0410-b5e6-96231b3b80d8
