Summary:
Part of the adjustCopiesBackFrom method wasn't correctly dealing with SubRange
intervals when updating.
2 changes. The first to ensure that bogus SubRange Segments aren't propagated when
encountering Segments of the form [1234r, 1234d:0) when preparing to merge value
numbers. These can be removed in this case.
The second forces a shrinkToUses call if SubRanges end on the copy index
(instead of just the parent register).
V2: Addressed review comments, plus MIR test instead of ll test
Subscribers: MatzeB, qcolombet, nhaehnle
Differential Revision: https://reviews.llvm.org/D40308
Change-Id: I1d2b2b4beea802fce11da01edf71feb2064aab05
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337273 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123292.htmlhttp://lists.llvm.org/pipermail/llvm-dev/2018-July/124400.html
We want to add rotate intrinsics because the IR expansion of that pattern is 4+ instructions,
and we can lose pieces of the pattern before it gets to the backend. Generalizing the operation
by allowing 2 different input values (plus the 3rd shift/rotate amount) gives us a "funnel shift"
operation which may also be a single hardware instruction.
Initially, I thought we needed to define new DAG nodes for these ops, and I spent time working
on that (much larger patch), but then I concluded that we don't need it. At least as a first
step, we have all of the backend support necessary to match these ops...because it was required.
And shepherding these through the IR optimizer is the primary concern, so the IR intrinsics are
likely all that we'll ever need.
There was also a question about converting the intrinsics to the existing ROTL/ROTR DAG nodes
(along with improving the oversized shift documentation). Again, I don't think that's strictly
necessary (as the test results here prove). That can be an efficiency improvement as a small
follow-up patch.
So all we're left with is documentation, definition of the IR intrinsics, and DAG builder support.
Differential Revision: https://reviews.llvm.org/D49242
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337221 91177308-0d34-0410-b5e6-96231b3b80d8
trivially rematerializable.
We run into a case where machineLICM hoists a large number of live ranges
outside of a big loop because it thinks those live ranges are trivially
rematerializable. In regalloc, global splitting is tried out first for those
live ranges before they are spilled and rematerialized. Because the global
splitting algorithm is quadratic, increasing a lot of global splitting
candidates causes huge compile time increase (50s to 1400s on my local
machine when compiling a module).
However, we think for live ranges which are very large and are trivially
rematerialiable, it is better to just skip global splitting so as to save
compile time with little chance of sacrificing performance. We uses the
segment size of live range to indirectly evaluate whether the global
splitting of the live range can introduce high cost, and use an option
as a knob to adjust the size limit threshold.
Differential Revision: https://reviews.llvm.org/D49353
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337186 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the high part of the load is not used the offset to the next element
will not be set correctly.
For example, on Sparc V8, the following code will read val2 from offset 4
instead of 8.
```
int val = __builtin_va_arg(va, long long);
int val2 = __builtin_va_arg(va, int);
```
Reviewers: jyknight
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48595
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337161 91177308-0d34-0410-b5e6-96231b3b80d8
For dsymutil we want to store offsets in the accelerator table entries
rather than DIE pointers. In addition, we need a way to communicate
which CU a DIE belongs to. This patch provides support for both of these
issues.
Differential revision: https://reviews.llvm.org/D49102
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337158 91177308-0d34-0410-b5e6-96231b3b80d8
This is almost the same as an existing IR canonicalization in instcombine,
so I'm assuming this is a good early generic DAG combine too.
The motivation comes from reduced bit-hacking for select-of-constants in IR
after rL331486. We want to restore that functionality in the DAG as noted in
the commit comments for that change and the llvm-dev discussion here:
http://lists.llvm.org/pipermail/llvm-dev/2018-July/124433.html
The PPC and AArch tests show that those targets are already doing something
similar. x86 will be neutral in the minimal case and generally better when
this pattern is extended with other ops as shown in the signbit-shift.ll tests.
Note the asymmetry: we don't include the (extend (ifneg X)) transform because
it already exists in SimplifySelectCC(), and that is verified in the later
unchanged tests in the signbit-shift.ll files. Without the 'not' op, the
general transform to use a shift is always a win because that's a single
instruction.
Alive proofs:
https://rise4fun.com/Alive/ysli
Name: if pos, get -1
%c = icmp sgt i16 %x, -1
%r = sext i1 %c to i16
=>
%n = xor i16 %x, -1
%r = ashr i16 %n, 15
Name: if pos, get 1
%c = icmp sgt i16 %x, -1
%r = zext i1 %c to i16
=>
%n = xor i16 %x, -1
%r = lshr i16 %n, 15
Differential Revision: https://reviews.llvm.org/D48970
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337130 91177308-0d34-0410-b5e6-96231b3b80d8
The MachineOutliner was doing an std::for_each from the call (inserted
before the outlined sequence) to the iterator at the end of the
sequence.
std::for_each needs the iterator past the end, so the last instruction
was not taken into account when propagating the liveness information.
This fixes the machine verifier issue in machine-outliner-disubprogram.ll.
Differential Revision: https://reviews.llvm.org/D49295
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337090 91177308-0d34-0410-b5e6-96231b3b80d8
Spectre variant #1 for x86.
There is a lengthy, detailed RFC thread on llvm-dev which discusses the
high level issues. High level discussion is probably best there.
I've split the design document out of this patch and will land it
separately once I update it to reflect the latest edits and updates to
the Google doc used in the RFC thread.
This patch is really just an initial step. It isn't quite ready for
prime time and is only exposed via debugging flags. It has two major
limitations currently:
1) It only supports x86-64, and only certain ABIs. Many assumptions are
currently hard-coded and need to be factored out of the code here.
2) It doesn't include any options for more fine-grained control, either
of which control flow edges are significant or which loads are
important to be hardened.
3) The code is still quite rough and the testing lighter than I'd like.
However, this is enough for people to begin using. I have had numerous
requests from people to be able to experiment with this patch to
understand the trade-offs it presents and how to use it. We would also
like to encourage work to similar effect in other toolchains.
The ARM folks are actively developing a system based on this for
AArch64. We hope to merge this with their efforts when both are far
enough along. But we also don't want to block making this available on
that effort.
Many thanks to the *numerous* people who helped along the way here. For
this patch in particular, both Eric and Craig did a ton of review to
even have confidence in it as an early, rough cut at this functionality.
Differential Revision: https://reviews.llvm.org/D44824
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336990 91177308-0d34-0410-b5e6-96231b3b80d8
During the execution of long functions or functions that have a lot of
inlined code it could come to the situation where tracked value could be
transferred from one register to another. The transfer is recognized only if
destination register is a callee saved register and if source register is
killed. We do not salvage caller-saved registers since there is a great
chance that killed register would outlive it.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D44016
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336978 91177308-0d34-0410-b5e6-96231b3b80d8
This re-applies r336929 with a fix to accomodate for the Mips target
scheduling multiple SelectionDAG instances into the pass pipeline.
PrologEpilogInserter and StackColoring depend on the StackProtector analysis
being alive from the point it is run until PEI, which requires that they are all
scheduled in the same FunctionPassManager. Inserting a (machine) ModulePass
between StackProtector and PEI results in these passes being in separate
FunctionPassManagers and the StackProtector is not available for PEI.
PEI and StackColoring don't use much information from the StackProtector pass,
so transfering the required information to MachineFrameInfo is cleaner than
keeping the StackProtector pass around. This commit moves the SSP layout
information to MFI instead of keeping it in the pass.
This patch set (D37580, D37581, D37582, D37583, D37584, D37585, D37586, D37587)
is a first draft of the pagerando implementation described in
http://lists.llvm.org/pipermail/llvm-dev/2017-June/113794.html.
Patch by Stephen Crane <sjc@immunant.com>
Differential Revision: https://reviews.llvm.org/D49256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336964 91177308-0d34-0410-b5e6-96231b3b80d8
PrologEpilogInserter and StackColoring depend on the StackProtector analysis
being alive from the point it is run until PEI, which requires that they are all
scheduled in the same FunctionPassManager. Inserting a (machine) ModulePass
between StackProtector and PEI results in these passes being in separate
FunctionPassManagers and the StackProtector is not available for PEI.
PEI and StackColoring don't use much information from the StackProtector pass,
so transfering the required information to MachineFrameInfo is cleaner than
keeping the StackProtector pass around. This commit moves the SSP layout
information to MFI instead of keeping it in the pass.
This patch set (D37580, D37581, D37582, D37583, D37584, D37585, D37586, D37587)
is a first draft of the pagerando implementation described in
http://lists.llvm.org/pipermail/llvm-dev/2017-June/113794.html.
Patch by Stephen Crane <sjc@immunant.com>
Differential Revision: https://reviews.llvm.org/D49256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336929 91177308-0d34-0410-b5e6-96231b3b80d8
This is marginally helpful for removing redundant extensions, and the
code is easier to read, so it seems like an all-around win. In the new
test i8-phi-ext.ll, we used to emit an AssertSext i8; now we emit an
AssertZext i2, which allows the extension of the return value to be
eliminated.
Differential Revision: https://reviews.llvm.org/D49004
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336868 91177308-0d34-0410-b5e6-96231b3b80d8
Debug uses should not count as real uses, since the presence of debug
information could affect the generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336803 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to use SelectionDAG::isKnownNeverZero in DAGCombiner::visitREM (visitSDIVLike/visitUDIVLike handle the checking for constants).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336779 91177308-0d34-0410-b5e6-96231b3b80d8
First stage in PR38057 - support non-uniform constant vectors in the combine to reuse the division-by-constant logic.
We can definitely do better for srem pow2 remainders (and avoid that extra multiply....) but this at least helps keep everything on the vector unit.
Differential Revision: https://reviews.llvm.org/D48975
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336774 91177308-0d34-0410-b5e6-96231b3b80d8
As suggested by @efriedma on D48975 use the visitSDIVLike/visitUDIVLike functions introduced at rL336656.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336664 91177308-0d34-0410-b5e6-96231b3b80d8
As suggested by @efriedma on D48975, this patch separates the BuildDiv/Pow2 style optimizations from the rest of the visitSDIV/visitUDIV to make it easier to reuse the combines and will allow us to avoid some rather nasty node recursive combining in visitREM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336656 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds support for the atomicrmw instructions and the strong
cmpxchg instruction to the IRTranslator.
I've left out weak cmpxchg because LangRef.rst isn't entirely clear on what
difference it makes to the backend. As far as I can tell from the code, it
only matters to AtomicExpandPass which is run at the LLVM-IR level.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar, volkan, javed.absar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D40092
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336589 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds a reverse transform for the instcombine canonicalizations
that were added in D47980, D47981.
As discussed later, that was worse at least for the code size,
and potentially for the performance, too.
https://rise4fun.com/Alive/Zmpl
Reviewers: craig.topper, RKSimon, spatel
Reviewed By: spatel
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D48768
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336585 91177308-0d34-0410-b5e6-96231b3b80d8
This is similar to what is done for binops. I don't know if this would have helped us catch the bug fixed in r336566 earlier or not, but I figured it couldn't hurt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336576 91177308-0d34-0410-b5e6-96231b3b80d8
When emitting the DWARF accelerator tables from dsymutil, we don't have
a DwarfDebug instance and we use a custom class to represent Dwarf
compile units. This patch adds an interface AccelTableWriterInfo to
abstract these from the Dwarf5AccelTableWriter, so we can have a custom
implementation for this in dsymutil.
Differential revision: https://reviews.llvm.org/D49031
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336529 91177308-0d34-0410-b5e6-96231b3b80d8
Splits off isKnownNeverZeroFloat to handle +/- 0 float cases.
This will make it easier to be more aggressive with the integer isKnownNeverZero tests (similar to ValueTracking), use computeKnownBits etc.
Differential Revision: https://reviews.llvm.org/D48969
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336492 91177308-0d34-0410-b5e6-96231b3b80d8
It's a bit neater to write T.isIntOrPtrTy() over `T.isIntegerTy() ||
T.isPointerTy()`.
I used Python's re.sub with this regex to update users:
r'([\w.\->()]+)isIntegerTy\(\)\s*\|\|\s*\1isPointerTy\(\)'
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336462 91177308-0d34-0410-b5e6-96231b3b80d8
The replaceAllDbgUsesWith utility helps passes preserve debug info when
replacing one value with another.
This improves upon the existing insertReplacementDbgValues API by:
- Updating debug intrinsics in-place, while preventing use-before-def of
the replacement value.
- Falling back to salvageDebugInfo when a replacement can't be made.
- Moving the responsibiliy for rewriting llvm.dbg.* DIExpressions into
common utility code.
Along with the API change, this teaches replaceAllDbgUsesWith how to
create DIExpressions for three basic integer and pointer conversions:
- The no-op conversion. Applies when the values have the same width, or
have bit-for-bit compatible pointer representations.
- Truncation. Applies when the new value is wider than the old one.
- Zero/sign extension. Applies when the new value is narrower than the
old one.
Testing:
- check-llvm, check-clang, a stage2 `-g -O3` build of clang,
regression/unit testing.
- This resolves a number of mis-sized dbg.value diagnostics from
Debugify.
Differential Revision: https://reviews.llvm.org/D48676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336451 91177308-0d34-0410-b5e6-96231b3b80d8
D48278
Allow to reduce redundant shift masks.
For example:
x1 = x & 0xAB00
x2 = (x >> 8) & 0xAB
can be reduced to:
x1 = x & 0xAB00
x2 = x1 >> 8
It only allows folding when the masks and shift values are constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336426 91177308-0d34-0410-b5e6-96231b3b80d8
The following code pattern:
mov %rax, %rcx
test %rax, %rax
%rax = ....
je throw_npe
mov(%rcx), %r9
mov(%rax), %r10
gets transformed into the following incorrect code after implicit null check pass:
mov %rax, %rcx
%rax = ....
faulting_load_op("movl (%rax), %r10", throw_npe)
mov(%rcx), %r9
For implicit null check pass, if the register that is checked for null value (ie, the register used in the 'test' instruction) is written into before the condition jump, we should avoid doing the optimization.
Patch by Surya Kumari Jangala!
Differential Revision: https://reviews.llvm.org/D48627
Reviewed By: skatkov
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336241 91177308-0d34-0410-b5e6-96231b3b80d8
Now that D45806 has landed, we can re-enable support for MIN_SIGNED_VALUE in the sdiv by pow2-constant code
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336198 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Replace use of a SmallPtrSet with a SmallSetVector to make the worklist
iteration order deterministic. This is done as the order the blocks are
removed may affect whether or not PHI nodes in successor blocks are
removed.
For example, consider the following case where %bb1 and %bb2 are
removed:
bb1:
br i1 undef, label %bb3, label %bb4
bb2:
br i1 undef, label %bb4, label %bb3
bb3:
pv1 = phi type [ undef, %bb1 ], [ undef, %bb2], [ v0, %other ]
br label %bb4
bb4:
pv2 = phi type [ undef, %bb1 ], [ undef, %bb2 ],
[ pv1, %bb3 ], [ v0, %other ]
If %bb2 is removed before %bb1, the incoming values from %bb1 and %bb2
to pv1 will be removed before %bb1 is removed as a predecessor to %bb4.
The pv1 node will thus be optimized out (to v0) at the time %bb1 is
removed as a predecessor to %bb4, leaving the blocks as following when
the incoming value from %bb1 has been removed:
bb3: ; pv1 optimized out, incoming value to pv2 is v0
br label %bb4
bb4:
pv2 = phi type [ v0, %bb3 ], [ v0, %other ]
The pv2 PHI node will be optimized away by removePredecessor() as all
incoming values are identical.
In case %bb2 is removed after %bb1, pv1 will not be optimized out at the
time %bb2 is removed as a predecessor to %bb4, leaving the blocks as
following when the incoming value from %bb2 to pv2 has been removed:
bb3:
pv1 = phi type [ undef, %bb2 ], [ v0, %other ]
br label %bb4
bb4:
pv2 = phi type [ pv1, %bb3 ], [ v0, %other ]
The pv2 PHI node will thus not be removed in this case, ultimately
leading to the following output
bb3: ; pv1 optimized out, incoming value to pv2 is v0
br label %bb4
bb4:
pv2 = phi type [ v0, %bb3 ], [ v0, %other ]
I have not looked into changing DeleteDeadBlock() so that the redundant
PHI nodes are removed.
I have not added a test case, as I was not able to create a particularly
small and (not messy) reproducer. This is likely due to SmallPtrSet
behaving deterministically when in small mode.
Reviewers: void, dexonsmith, spatel, skatkov, fhahn, bkramer, nhaehnle
Reviewed By: fhahn
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D48369
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336109 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch introduce new intrinsic -
strip.invariant.group that was described in the
RFC: Devirtualization v2
Reviewers: rsmith, hfinkel, nlopes, sanjoy, amharc, kuhar
Subscribers: arsenm, nhaehnle, JDevlieghere, hiraditya, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47103
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336073 91177308-0d34-0410-b5e6-96231b3b80d8
