In this code we keep track of pointers that we are allowed to read from, if they are accessed by non-predicated blocks.
We use this list to allow vectorization of conditional loads in predicated blocks because we know that these addresses don't segfault.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185214 91177308-0d34-0410-b5e6-96231b3b80d8
I used the class to safely reset the state of the builder's debug location. I
think I have caught all places where we need to set the debug location to a new
one. Therefore, we can replace the class by a function that just sets the debug
location.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185165 91177308-0d34-0410-b5e6-96231b3b80d8
Use vectorized instruction instead of original instruction anchored in the
original loop.
Fixes PR16452 and t2075.c of PR16455.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185081 91177308-0d34-0410-b5e6-96231b3b80d8
When we store values for reversed induction stores we must not store the
reversed value in the vectorized value map. Another instruction might use this
value.
This fixes 3 test cases of PR16455.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185051 91177308-0d34-0410-b5e6-96231b3b80d8
This should hopefully have fixed the stage2/stage3 miscompare on the dragonegg
testers.
"LoopVectorize: Use the dependence test utility class
We now no longer need alias analysis - the cases that alias analysis would
handle are now handled as accesses with a large dependence distance.
We can now vectorize loops with simple constant dependence distances.
for (i = 8; i < 256; ++i) {
a[i] = a[i+4] * a[i+8];
}
for (i = 8; i < 256; ++i) {
a[i] = a[i-4] * a[i-8];
}
We would be able to vectorize about 200 more loops (in many cases the cost model
instructs us no to) in the test suite now. Results on x86-64 are a wash.
I have seen one degradation in ammp. Interestingly, the function in which we
now vectorize a loop is never executed so we probably see some instruction
cache effects. There is a 2% improvement in h264ref. There is one or the other
TSCV loop kernel that speeds up.
radar://13681598"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184724 91177308-0d34-0410-b5e6-96231b3b80d8
We now no longer need alias analysis - the cases that alias analysis would
handle are now handled as accesses with a large dependence distance.
We can now vectorize loops with simple constant dependence distances.
for (i = 8; i < 256; ++i) {
a[i] = a[i+4] * a[i+8];
}
for (i = 8; i < 256; ++i) {
a[i] = a[i-4] * a[i-8];
}
We would be able to vectorize about 200 more loops (in many cases the cost model
instructs us no to) in the test suite now. Results on x86-64 are a wash.
I have seen one degradation in ammp. Interestingly, the function in which we
now vectorize a loop is never executed so we probably see some instruction
cache effects. There is a 2% improvement in h264ref. There is one or the other
TSCV loop kernel that speeds up.
radar://13681598
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184685 91177308-0d34-0410-b5e6-96231b3b80d8
This class checks dependences by subtracting two Scalar Evolution access
functions allowing us to catch very simple linear dependences.
The checker assumes source order in determining whether vectorization is safe.
We currently don't reorder accesses.
Positive true dependencies need to be a multiple of VF otherwise we impede
store-load forwarding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184684 91177308-0d34-0410-b5e6-96231b3b80d8
Sets of dependent accesses are built by unioning sets based on underlying
objects. This class will be used by the upcoming dependence checker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184683 91177308-0d34-0410-b5e6-96231b3b80d8
Untill now we detected the vectorizable tree and evaluated the cost of the
entire tree. With this patch we can decide to trim-out branches of the tree
that are not profitable to vectorizer.
Also, increase the max depth from 6 to 12. In the worse possible case where all
of the code is made of diamond-shaped graph this can bring the cost to 2**10,
but diamonds are not very common.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184681 91177308-0d34-0410-b5e6-96231b3b80d8
The RAII builder location guard is saving a reference to instructions, so we can't erase instructions during vectorization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184671 91177308-0d34-0410-b5e6-96231b3b80d8
Rewrote the SLP-vectorization as a whole-function vectorization pass. It is now able to vectorize chains across multiple basic blocks.
It still does not vectorize PHIs, but this should be easy to do now that we scan the entire function.
I removed the support for extracting values from trees.
We are now able to vectorize more programs, but there are some serious regressions in many workloads (such as flops-6 and mandel-2).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184647 91177308-0d34-0410-b5e6-96231b3b80d8
We collect gather sequences when we vectorize basic blocks. Gather sequences are excellent
hints for vectorization of other basic blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184444 91177308-0d34-0410-b5e6-96231b3b80d8
The type <3 x i8> is a common in graphics and we want to be able to vectorize it.
This changes accelerates bullet by 12% and 471_omnetpp by 5%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184317 91177308-0d34-0410-b5e6-96231b3b80d8
vectorizing loops with memory accesses to non-zero address spaces. It
simply dropped the AS info. Fixes PR16306.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184103 91177308-0d34-0410-b5e6-96231b3b80d8
Use ScalarEvolution's getBackedgeTakenCount API instead of getExitCount since
that is really what we want to know. Using the more specific getExitCount was
safe because we made sure that there is only one exiting block.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183047 91177308-0d34-0410-b5e6-96231b3b80d8
We check that instructions in the loop don't have outside users (except if
they are reduction values). Unfortunately, we skipped this check for
if-convertable PHIs.
Fixes PR16184.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183035 91177308-0d34-0410-b5e6-96231b3b80d8
- llvm.loop.parallel metadata has been renamed to llvm.loop to be more generic
by making the root of additional loop metadata.
- Loop::isAnnotatedParallel now looks for llvm.loop and associated
llvm.mem.parallel_loop_access
- document llvm.loop and update llvm.mem.parallel_loop_access
- add support for llvm.vectorizer.width and llvm.vectorizer.unroll
- document llvm.vectorizer.* metadata
- add utility class LoopVectorizerHints for getting/setting loop metadata
- use llvm.vectorizer.width=1 to indicate already vectorized instead of
already_vectorized
- update existing tests that used llvm.loop.parallel and
llvm.vectorizer.already_vectorized
Reviewed by: Nadav Rotem
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182802 91177308-0d34-0410-b5e6-96231b3b80d8
We are not working on a DAG and I ran into a number of problems when I enabled the vectorizations of 'diamond-trees' (trees that share leafs).
* Imroved the numbering API.
* Changed the placement of new instructions to the last root.
* Fixed a bug with external tree users with non-zero lane.
* Fixed a bug in the placement of in-tree users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182508 91177308-0d34-0410-b5e6-96231b3b80d8
The Value pointers we store in the induction variable list can be RAUW'ed by a
call to SCEVExpander::expandCodeFor, use a TrackingVH instead. Do the same thing
in some other places where we store pointers that could potentially be RAUW'ed.
Fixes PR16073.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182485 91177308-0d34-0410-b5e6-96231b3b80d8
We only want to check this once, not for every conditional block in the loop.
No functionality change (except that we don't perform a check redudantly
anymore).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181942 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombine can be uncooperative to vectorization and sink loads into
conditional blocks. This prevents vectorization.
Undo this optimization if there are unconditional memory accesses to the same
addresses in the loop.
radar://13815763
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181860 91177308-0d34-0410-b5e6-96231b3b80d8
We used to give up if we saw two integer inductions. After this patch, we base
further induction variables on the chosen one like we do in the reverse
induction and pointer induction case.
Fixes PR15720.
radar://13851975
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181746 91177308-0d34-0410-b5e6-96231b3b80d8
The external user does not have to be in lane #0. We have to save the lane for each scalar so that we know which vector lane to extract.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181674 91177308-0d34-0410-b5e6-96231b3b80d8
Use the widest induction type encountered for the cannonical induction variable.
We used to turn the following loop into an empty loop because we used i8 as
induction variable type and truncated 1024 to 0 as trip count.
int a[1024];
void fail() {
int reverse_induction = 1023;
unsigned char forward_induction = 0;
while ((reverse_induction) >= 0) {
forward_induction++;
a[reverse_induction] = forward_induction;
--reverse_induction;
}
}
radar://13862901
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181667 91177308-0d34-0410-b5e6-96231b3b80d8
For example:
bar() {
int a = A[i];
int b = A[i+1];
B[i] = a;
B[i+1] = b;
foo(a); <--- a is used outside the vectorized expression.
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181648 91177308-0d34-0410-b5e6-96231b3b80d8
A computable loop exit count does not imply the presence of an induction
variable. Scalar evolution can return a value for an infinite loop.
Fixes PR15926.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181495 91177308-0d34-0410-b5e6-96231b3b80d8
The two nested loops were confusing and also conservative in identifying
reduction variables. This patch replaces them by a worklist based approach.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181369 91177308-0d34-0410-b5e6-96231b3b80d8
We were passing an i32 to ConstantInt::get where an i64 was needed and we must
also pass the sign if we pass negatives numbers. The start index passed to
getConsecutiveVector must also be signed.
Should fix PR15882.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181286 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for min/max reductions when "no-nans-float-math" is enabled. This
allows us to assume we have ordered floating point math and treat ordered and
unordered predicates equally.
radar://13723044
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181144 91177308-0d34-0410-b5e6-96231b3b80d8
We can just use the initial element that feeds the reduction.
max(max(x, y), z) == max(max(x,y), max(x,z))
radar://13723044
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181141 91177308-0d34-0410-b5e6-96231b3b80d8
By supporting the vectorization of PHINodes with more than two incoming values we can increase the complexity of nested if statements.
We can now vectorize this loop:
int foo(int *A, int *B, int n) {
for (int i=0; i < n; i++) {
int x = 9;
if (A[i] > B[i]) {
if (A[i] > 19) {
x = 3;
} else if (B[i] < 4 ) {
x = 4;
} else {
x = 5;
}
}
A[i] = x;
}
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181037 91177308-0d34-0410-b5e6-96231b3b80d8
the things, and renames it to CBindingWrapping.h. I also moved
CBindingWrapping.h into Support/.
This new file just contains the macros for defining different wrap/unwrap
methods.
The calls to those macros, as well as any custom wrap/unwrap definitions
(like for array of Values for example), are put into corresponding C++
headers.
Doing this required some #include surgery, since some .cpp files relied
on the fact that including Wrap.h implicitly caused the inclusion of a
bunch of other things.
This also now means that the C++ headers will include their corresponding
C API headers; for example Value.h must include llvm-c/Core.h. I think
this is harmless, since the C API headers contain just external function
declarations and some C types, so I don't believe there should be any
nasty dependency issues here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180881 91177308-0d34-0410-b5e6-96231b3b80d8
This patch disables memory-instruction vectorization for types that need padding
bytes, e.g., x86_fp80 has 10 bytes store size with 6 bytes padding in darwin on
x86_64. Because the load/store vectorization is performed by the bit casting to
a packed vector, which has incompatible memory layout due to the lack of padding
bytes, the present vectorizer produces inconsistent result for memory
instructions of those types.
This patch checks an equality of the AllocSize of a scalar type and allocated
size for each vector element, to ensure that there is no padding bytes and the
array can be read/written using vector operations.
Patch by Daisuke Takahashi!
Fixes PR15758.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180196 91177308-0d34-0410-b5e6-96231b3b80d8
even if erroneously annotated with the parallel loop metadata.
Fixes Bug 15794:
"Loop Vectorizer: Crashes with the use of llvm.loop.parallel metadata"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180081 91177308-0d34-0410-b5e6-96231b3b80d8
Also make some static function class functions to avoid having to mention the
class namespace for enums all the time.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179886 91177308-0d34-0410-b5e6-96231b3b80d8
A min/max operation is represented by a select(cmp(lt/le/gt/ge, X, Y), X, Y)
sequence in LLVM. If we see such a sequence we can treat it just as any other
commutative binary instruction and reduce it.
This appears to help bzip2 by about 1.5% on an imac12,2.
radar://12960601
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179773 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds the infrastructure for performing bottom-up SLP vectorization (and other optimizations) on parallel computations.
The infrastructure has three potential users:
1. The loop vectorizer needs to be able to vectorize AOS data structures such as (sum += A[i] + A[i+1]).
2. The BB-vectorizer needs this infrastructure for bottom-up SLP vectorization, because bottom-up vectorization is faster to compute.
3. A loop-roller needs to be able to analyze consecutive chains and roll them into a loop, in order to reduce code size. A loop roller does not need to create vector instructions, and this infrastructure separates the chain analysis from the vectorization.
This patch also includes a simple (100 LOC) bottom up SLP vectorizer that uses the infrastructure, and can vectorize this code:
void SAXPY(int *x, int *y, int a, int i) {
x[i] = a * x[i] + y[i];
x[i+1] = a * x[i+1] + y[i+1];
x[i+2] = a * x[i+2] + y[i+2];
x[i+3] = a * x[i+3] + y[i+3];
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179117 91177308-0d34-0410-b5e6-96231b3b80d8
Pass down the fact that an operand is going to be a vector of constants.
This should bring the performance of MultiSource/Benchmarks/PAQ8p/paq8p on x86
back. It had degraded to scalar performance due to my pervious shift cost change
that made all shifts expensive on x86.
radar://13576547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178809 91177308-0d34-0410-b5e6-96231b3b80d8
We generate a select with a vectorized condition argument when the condition is
NOT loop invariant. Not the other way around.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177098 91177308-0d34-0410-b5e6-96231b3b80d8
After the recent data-structure improvements, a couple of debugging statements
were broken (printing pointer values).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176791 91177308-0d34-0410-b5e6-96231b3b80d8
We want vectorization to happen at -g. Ignore calls to the dbg.value intrinsic
and don't transfer them to the vectorized code.
radar://13378964
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176768 91177308-0d34-0410-b5e6-96231b3b80d8
The LoopVectorizer often runs multiple times on the same function due to inlining.
When this happens the loop vectorizer often vectorizes the same loops multiple times, increasing code size and adding unneeded branches.
With this patch, the vectorizer during vectorization puts metadata on scalar loops and marks them as 'already vectorized' so that it knows to ignore them when it sees them a second time.
PR14448.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176399 91177308-0d34-0410-b5e6-96231b3b80d8
This properly asks TargetLibraryInfo if a call is available and if it is, it
can be translated into the corresponding LLVM builtin. We don't vectorize sqrt()
yet because I'm not sure about the semantics for negative numbers. The other
intrinsic should be exact equivalents to the libm functions.
Differential Revision: http://llvm-reviews.chandlerc.com/D465
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176188 91177308-0d34-0410-b5e6-96231b3b80d8
Storing the load/store instructions with the values
and inspect them using Alias Analysis to make sure
they don't alias, since the GEP pointer operand doesn't
take the offset into account.
Trying hard to not add any extra cost to loads and stores
that don't overlap on global values, AA is *only* calculated
if all of the previous attempts failed.
Using biggest vector register size as the stride for the
vectorization access, as we're being conservative and
the cost model (which calculates the real vectorization
factor) is only run after the legalization phase.
We might re-think this relationship in the future, but
for now, I'd rather be safe than sorry.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175818 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes PR15289. This bug was introduced (recently) in r175215; collecting
all std::vector references for candidate pairs to delete at once is invalid
because subsequent lookups in the owning DenseMap could invalidate the
references.
bugpoint was able to reduce a useful test case. Unfortunately, because whether
or not this asserts depends on memory layout, this test case will sometimes
appear to produce valid output. Nevertheless, running under valgrind will
reveal the error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175397 91177308-0d34-0410-b5e6-96231b3b80d8
Several functions and variable names used the term 'tree' to refer
to what is actually a DAG. Correcting this mistake will, hopefully,
prevent confusion in the future.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175278 91177308-0d34-0410-b5e6-96231b3b80d8
For some basic blocks, it is possible to generate many candidate pairs for
relatively few pairable instructions. When many (tens of thousands) of these pairs
are generated for a single instruction group, the time taken to generate and
rank the different vectorization plans can become quite large. As a result, we now
cap the number of candidate pairs within each instruction group. This is done by
closing out the group once the threshold is reached (set now at 3000 pairs).
Although this will limit the overall compile-time impact, this may not be the best
way to achieve this result. It might be better, for example, to prune excessive
candidate pairs after the fact the prevent the generation of short, but highly-connected
groups. We can experiment with this in the future.
This change reduces the overall compile-time slowdown of the csa.ll test case in
PR15222 to ~5x. If 5x is still considered too large, a lower limit can be
used as the default.
This represents a functionality change, but only for very large inputs
(thus, there is no regression test).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175251 91177308-0d34-0410-b5e6-96231b3b80d8
All instances of std::multimap have now been replaced by
DenseMap<K, std::vector<V> >, and this yields a speedup of 5% on the
csa.ll test case from PR15222.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175216 91177308-0d34-0410-b5e6-96231b3b80d8
This is another commit on the road to removing std::multimap from
BBVectorize. This gives an ~1% speedup on the csa.ll test case
in PR15222.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175215 91177308-0d34-0410-b5e6-96231b3b80d8
When building the pairable-instruction dependency map, don't search
past the last pairable instruction. For large blocks that have been
divided into multiple instruction groups, searching past the last
instruction in each group is very wasteful. This gives a 32% speedup
on the csa.ll test case from PR15222 (when using 50 instructions
in each group).
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174915 91177308-0d34-0410-b5e6-96231b3b80d8
This map is queried only for instructions in pairs of pairable
instructions; so make sure that only pairs of pairable
instructions are added to the map. This gives a 3.5% speedup
on the csa.ll test case from PR15222.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174914 91177308-0d34-0410-b5e6-96231b3b80d8
This eliminates one more linear search over a range of
std::multimap entries. This gives a 22% speedup on the
csa.ll test case from PR15222.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174893 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the last of the linear searches over ranges of std::multimap
iterators, giving a 7% speedup on the doduc.bc input from PR15222.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174859 91177308-0d34-0410-b5e6-96231b3b80d8
This is another cleanup aimed at eliminating linear searches
in ranges of std::multimap.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174858 91177308-0d34-0410-b5e6-96231b3b80d8
Profiling suggests that getInstructionTypes is performance-sensitive,
this cleans up some double-casting in that function in favor of
using dyn_cast.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174857 91177308-0d34-0410-b5e6-96231b3b80d8
By itself, this does not have much of an effect, but only because in the default
configuration the full cycle checks are used only for small problem sizes.
This is part of a general cleanup of uses of iteration over std::multimap
ranges only for the purpose of checking membership.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174856 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up to the cost-model change in r174713 which splits
the cost of a memory operation between the address computation and the
actual memory access. In r174713, this cost is always added to the
memory operation cost, and so BBVectorize will do the same.
Currently, this new cost function is used only by ARM, and I don't
have any ARM test cases for BBVectorize. Assistance in generating some
good ARM test cases for BBVectorize would be greatly appreciated!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174743 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a function to target transform info to query for the cost of address
computation. The cost model analysis pass now also queries this interface.
The code in LoopVectorize adds the cost of address computation as part of the
memory instruction cost calculation. Only there, we know whether the instruction
will be scalarized or not.
Increase the penality for inserting in to D registers on swift. This becomes
necessary because we now always assume that address computation has a cost and
three is a closer value to the architecture.
radar://13097204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174713 91177308-0d34-0410-b5e6-96231b3b80d8
We don't want too many classes in a pass and the classes obscure the details. I
was going a little overboard with object modeling here. Replace classes by
generic code that handles both loads and stores.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174646 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a helper class that computes the cost of memory access instructions.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174422 91177308-0d34-0410-b5e6-96231b3b80d8
In the loop vectorizer cost model, we used to ignore stores/loads of a pointer
type when computing the widest type within a loop. This meant that if we had
only stores/loads of pointers in a loop we would return a widest type of 8bits
(instead of 32 or 64 bit) and therefore a vector factor that was too big.
Now, if we see a consecutive store/load of pointers we use the size of a pointer
(from data layout).
This problem occured in SingleSource/Benchmarks/Shootout-C++/hash.cpp (reduced
test case is the first test in vector_ptr_load_store.ll).
radar://13139343
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174377 91177308-0d34-0410-b5e6-96231b3b80d8
When flipping the pair of subvectors that form a vector, if the
vector length is 2, we can use the SK_Reverse shuffle kind to get
more-accurate cost information. Also we can use the SK_ExtractSubvector
shuffle kind to get accurate subvector extraction costs.
The current cost model implementations don't yet seem complex enough
for this to make a difference (thus, there are no test cases with this
commit), but it should help in future.
Depending on how the various targets optimize and combine shuffles in
practice, we might be able to get more-accurate costs by combining the
costs of multiple shuffle kinds. For example, the cost of flipping the
subvector pairs could be modeled as two extractions and two subvector
insertions. These changes, however, should probably be motivated
by specific test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173621 91177308-0d34-0410-b5e6-96231b3b80d8
We ignore the cpu frontend and focus on pipeline utilization. We do this because we
don't have a good way to estimate the loop body size at the IR level.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172964 91177308-0d34-0410-b5e6-96231b3b80d8
This separates the check for "too few elements to run the vector loop" from the
"memory overlap" check, giving a lot nicer code and allowing to skip the memory
checks when we're not going to execute the vector code anyways. We still leave
the decision of whether to emit the memory checks as branches or setccs, but it
seems to be doing a good job. If ugly code pops up we may want to emit them as
separate blocks too. Small speedup on MultiSource/Benchmarks/MallocBench/espresso.
Most of this is legwork to allow multiple bypass blocks while updating PHIs,
dominators and loop info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172902 91177308-0d34-0410-b5e6-96231b3b80d8
We don't have a detailed analysis on which values are vectorized and which stay scalars in the vectorized loop so we use
another method. We look at reduction variables, loads and stores, which are the only ways to get information in and out
of loop iterations. If the data types are extended and truncated then the cost model will catch the cost of the vector
zext/sext/trunc operations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172178 91177308-0d34-0410-b5e6-96231b3b80d8
small loops. On small loops post-loop that handles scalars (and runs slower) can take more time to execute than the
rest of the loop. This patch disables widening of loops with a small static trip count.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171798 91177308-0d34-0410-b5e6-96231b3b80d8
being present. Make a member of one of the helper classes a reference as
part of this.
Reformatting goodness brought to you by clang-format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171726 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the loop vectorizer match the pattern followed by roughly all
other passses. =]
Notably, this header file was braken in several regards: it contained
a using namespace directive, global #define's that aren't globaly
appropriate, and global constants defined directly in the header file.
As a side benefit, lots of the types in this file become internal, which
will cause the optimizer to chew on this pass more effectively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171723 91177308-0d34-0410-b5e6-96231b3b80d8
This could be simplified further, but Hal has a specific feature for
ignoring TTI, and so I preserved that.
Also, I needed to use it because a number of tests fail when switching
from a null TTI to the NoTTI nonce implementation. That seems suspicious
to me and so may be something that you need to look into Hal. I worked
it by preserving the old behavior for these tests with the flag that
ignores all target info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171722 91177308-0d34-0410-b5e6-96231b3b80d8
this patch brought to you by the tool clang-format.
I wanted to fix up the names of constructor parameters because they
followed a bit of an anti-pattern by naming initialisms with CamelCase:
'Tti', 'Se', etc. This appears to have been in an attempt to not overlap
with the names of member variables 'TTI', 'SE', etc. However,
constructor arguments can very safely alias members, and in fact that's
the conventional way to pass in members. I've fixed all of these I saw,
along with making some strang abbreviations such as 'Lp' be simpler 'L',
or 'Lgl' be the word 'Legal'.
However, the code I was touching had indentation and formatting somewhat
all over the map. So I ran clang-format and fixed them.
I also fixed a few other formatting or doxygen formatting issues such as
using ///< on trailing comments so they are associated with the correct
entry.
There is still a lot of room for improvement of the formating and
cleanliness of this code. ;] At least a few parts of the coding
standards or common practices in LLVM's code aren't followed, the enum
naming rules jumped out at me. I may mix some of these while I'm here,
but not all of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171719 91177308-0d34-0410-b5e6-96231b3b80d8
Since subtraction does not commute the loop vectorizer incorrectly vectorizes
reductions such as x = A[i] - x.
Disabling for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171537 91177308-0d34-0410-b5e6-96231b3b80d8
1. Add code to estimate register pressure.
2. Add code to select the unroll factor based on register pressure.
3. Add bits to TargetTransformInfo to provide the number of registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171469 91177308-0d34-0410-b5e6-96231b3b80d8
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
directly.
This is in preparation for removing the use of the 'Attribute' class as a
collection of attributes. That will shift to the AttributeSet class instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171253 91177308-0d34-0410-b5e6-96231b3b80d8
LCSSA PHIs may have undef values. The vectorizer updates values that are used by outside users such as PHIs.
The bug happened because undefs are not loop values. This patch handles these PHIs.
PR14725
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171251 91177308-0d34-0410-b5e6-96231b3b80d8
For the time being this includes only some dummy test cases. Once the
generic implementation of the intrinsics cost function does something other
than assuming scalarization in all cases, or some target specializes the
interface, some real test cases can be added.
Also, for consistency, I changed the type of IID from unsigned to Intrinsic::ID
in a few other places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171079 91177308-0d34-0410-b5e6-96231b3b80d8
and not the return type, which is void. A number of test
cases fail after adding the assertion in TTImpl.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170828 91177308-0d34-0410-b5e6-96231b3b80d8
memory bound checks. Before the fix we were able to vectorize this loop from
the Livermore Loops benchmark:
for ( k=1 ; k<n ; k++ )
x[k] = x[k-1] + y[k];
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170811 91177308-0d34-0410-b5e6-96231b3b80d8
Before if-conversion we could check if a value is loop invariant
if it was declared inside the basic block. Now that loops have
multiple blocks this check is incorrect.
This fixes External/SPEC/CINT95/099_go/099_go
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170756 91177308-0d34-0410-b5e6-96231b3b80d8
MapVector is a bit heavyweight, but I don't see a simpler way. Also the
InductionList is unlikely to be large. This should help 3-stage selfhost
compares (PR14647).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170528 91177308-0d34-0410-b5e6-96231b3b80d8
- added function to VectorTargetTransformInfo to query cost of intrinsics
- vectorize trivially vectorizable intrinsic calls such as sin, cos, log, etc.
Reviewed by: Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169711 91177308-0d34-0410-b5e6-96231b3b80d8
reduction variable is not used outside the loop then we ran into an
endless loop. This change checks if we found the original PHI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169324 91177308-0d34-0410-b5e6-96231b3b80d8
Added the code that actually performs the if-conversion during vectorization.
We can now vectorize this code:
for (int i=0; i<n; ++i) {
unsigned k = 0;
if (a[i] > b[i]) <------ IF inside the loop.
k = k * 5 + 3;
a[i] = k; <---- K is a phi node that becomes vector-select.
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169217 91177308-0d34-0410-b5e6-96231b3b80d8
which is the legality of the if-conversion transformation. The next step is to
implement the cost-model for the if-converted code as well as the
vectorization itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169152 91177308-0d34-0410-b5e6-96231b3b80d8
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169131 91177308-0d34-0410-b5e6-96231b3b80d8
When two instructions are combined into a vector instruction,
the resulting instruction must have the most-conservative flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168765 91177308-0d34-0410-b5e6-96231b3b80d8
For now, this uses 8 on-stack elements. I'll need to do some profiling
to see if this is the best number.
Pointed out by Jakob in post-commit review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167966 91177308-0d34-0410-b5e6-96231b3b80d8
