We currently use only VLDR/VSTR for all 64-bit loads/stores, so the
memory operands must be word-aligned. Mark aligned operations as legal
and narrow non-aligned ones to 32 bits.
While we're here, also mark non-power-of-2 loads/stores as unsupported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356872 91177308-0d34-0410-b5e6-96231b3b80d8
Enable SSE41 ZERO_EXTEND_VECTOR_INREG shuffle combines - for the PMOVZX(PSHUFD(V)) -> UNPCKH(V,0) pattern we reduce the shuffles (port5-bottleneck on Intel) at the expense of creating a zero (pxor v,v) and an extra register move - which is a good trade off as these are pretty cheap and in most cases it doesn't increase register pressure.
This also exposed a missed opportunity to use combine to ZERO_EXTEND_VECTOR_INREG with folded loads - even if we're in the float domain.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356864 91177308-0d34-0410-b5e6-96231b3b80d8
Just enable this for AVX for now as SSE41 introduces extra register moves for the PMOVZX(PSHUFD(V)) -> UNPCKH(V,0) pattern (but otherwise helps reduce port5 usage on Intel targets).
Only AVX support is required for PR40685 as the issue is due to 8i8->8i32 zext shuffle leftovers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356858 91177308-0d34-0410-b5e6-96231b3b80d8
On 32-bit targets without popcnt, we currently expand 64-bit popcnt to sequences of arithmetic and logic ops for each 32-bit half and then add the 32 bit halves together. If we have xmm registers we can use use those to implement the operation instead. This results in less instructions then doing two separate 32-bit popcnt sequences.
This mitigates some of PR41151 for the i64 on i686 case when we have SSE2.
Differential Revision: https://reviews.llvm.org/D59662
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356808 91177308-0d34-0410-b5e6-96231b3b80d8
We used a lock cmpxchg8b to do i64 atomic loads. But if we have SSE2 we can do better and use a plain movq to do the load instead.
I tried to just use an f64 atomic load and add isel patterns to MOVSD(which the domain fixing pass can turn to MOVQ), but the atomic_load SDNode in TargetSelectionDAG.td requires the type to be integer.
So I've emitted VZEXT_LOAD instead which should be selected by isel to a MOVQ. Hopefully we don't need a specific atomic flavor of this. I kept the memory operand from the original AtomicSDNode. I wasn't sure if I might need to set the MOVolatile flag?
I've left some FIXMEs for improvements we can do without SSE2.
Differential Revision: https://reviews.llvm.org/D59679
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356807 91177308-0d34-0410-b5e6-96231b3b80d8
Just as as llvm IR supports explicitly specifying numeric value ids
for instructions, and emits them by default in textual output, now do
the same for blocks.
This is a slightly incompatible change in the textual IR format.
Previously, llvm would parse numeric labels as string names. E.g.
define void @f() {
br label %"55"
55:
ret void
}
defined a label *named* "55", even without needing to be quoted, while
the reference required quoting. Now, if you intend a block label which
looks like a value number to be a name, you must quote it in the
definition too (e.g. `"55":`).
Previously, llvm would print nameless blocks only as a comment, and
would omit it if there was no predecessor. This could cause confusion
for readers of the IR, just as unnamed instructions did prior to the
addition of "%5 = " syntax, back in 2008 (PR2480).
Now, it will always print a label for an unnamed block, with the
exception of the entry block. (IMO it may be better to print it for
the entry-block as well. However, that requires updating many more
tests.)
Thus, the following is supported, and is the canonical printing:
define i32 @f(i32, i32) {
%3 = add i32 %0, %1
br label %4
4:
ret i32 %3
}
New test cases covering this behavior are added, and other tests
updated as required.
Differential Revision: https://reviews.llvm.org/D58548
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356789 91177308-0d34-0410-b5e6-96231b3b80d8
Some image ops return three or five dwords. Previously, we modeled that
with a 4 or 8 dword register class. The register allocator could
cleverly spot that some subregs were dead and allocate something else
there, but that caused the de-optimization that waitcnt insertion would
think that the result was used immediately.
This commit allows such an image op to have a result with a three or
five dword result, avoiding the above de-optimization.
Differential Revision: https://reviews.llvm.org/D58905
Change-Id: I3651211bbd7ed22721ee7b9fefd7bcc60a809d8b
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356757 91177308-0d34-0410-b5e6-96231b3b80d8
Now we have vec3 MVTs, this commit implements dwordx3 variants of the
buffer intrinsics.
On gfx6, a dwordx3 buffer load intrinsic is implemented as a dwordx4
instruction, and a dwordx3 buffer store intrinsic is not supported.
We need to support the dwordx3 load intrinsic because it is generated by
subtarget-unaware code in InstCombine.
Differential Revision: https://reviews.llvm.org/D58904
Change-Id: I016729d8557b98a52f529638ae97c340a5922a4e
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356755 91177308-0d34-0410-b5e6-96231b3b80d8
The RISC-V ISA defines RV32E as an alternative "base" instruction set
encoding, that differs from RV32I by having only 16 rather than 32 registers.
This patch adds basic definitions for RV32E as well as MC layer support
(assembling, disassembling) and tests. The only supported ABI on RV32E is
ILP32E.
Add a new RISCVFeatures::validate() helper to RISCVUtils which can be called
from codegen or MC layer libraries to validate the combination of TargetTriple
and FeatureBitSet. Other targets have similar checks (e.g. erroring if SPE is
enabled on PPC64 or oddspreg + o32 ABI on Mips), but they either duplicate the
checks (Mips), or fail to check for both codegen and MC codepaths (PPC).
Codegen for the ILP32E ABI support and RV32E codegen are left for a future
patch/patches.
Differential Revision: https://reviews.llvm.org/D59470
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356744 91177308-0d34-0410-b5e6-96231b3b80d8
This patch optimizes the emission of a sequence of SELECTs with the same
condition, avoiding the insertion of unnecessary control flow. Such a sequence
often occurs when a SELECT of values wider than XLEN is legalized into two
SELECTs with legal types. We have identified several use cases where the
SELECTs could be interleaved with other instructions. Therefore, we extend the
sequence to include non-SELECT instructions if we are able to detect that the
non-SELECT instructions do not impact the optimization.
This patch supersedes https://reviews.llvm.org/D59096, which attempted to
address this issue by introducing a new SelectionDAG node. Hat tip to Eli
Friedman for his feedback on how to best handle this issue.
Differential Revision: https://reviews.llvm.org/D59355
Patch by Luís Marques.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356741 91177308-0d34-0410-b5e6-96231b3b80d8
Indicates in the TargetLowering interface that conversions from CC logic to
bitwise logic are allowed. Adds tests that show the benefit when optimization
opportunities are detected. Also adds tests that show that when the optimization
is not applied correct code is generated (but opportunities for other
optimizations remain).
Differential Revision: https://reviews.llvm.org/D59596
Patch by Luís Marques.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356740 91177308-0d34-0410-b5e6-96231b3b80d8
The DataSecEentries is defined as an unordered_map since
order does not really matter.
std::unordered_map<std::string, std::unique_ptr<BTFKindDataSec>>
DataSecEntries;
This seems causing the test static-var-derived-type.ll flaky
as two sections ".bss" and ".readonly" have undeterministic
ordering when performing map iterating, which decides the
output assembly code sequence of BTF_KIND_DATASEC entries.
Fix the test to have only one data section to remove
flakiness.
Signed-off-by: Yonghong Song <yhs@fb.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356731 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, the type id for a derived type is computed incorrectly.
For example,
type #1: int
type #2: ptr to #1
For a global variable "int *a", type #1 will be attributed to variable "a".
This is due to a bug which assigns the type id of the basetype of
that derived type as the derived type's type id. This happens
to "const", "volatile", "restrict", "typedef" and "pointer" types.
This patch fixed this bug, fixed existing test cases and added
a new one focusing on pointers plus other derived types.
Signed-off-by: Yonghong Song <yhs@fb.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356727 91177308-0d34-0410-b5e6-96231b3b80d8
This is the result of discussions on the list about how to deal with intrinsics
which require codegen to disambiguate them via only the integer/fp overloads.
It causes problems for GlobalISel as some of that information is lost during
translation, while with other operations like IR instructions the information is
encoded into the instruction opcode.
This patch changes clang to emit the new faddp intrinsic if the vector operands
to the builtin have FP element types. LLVM IR AutoUpgrade has been taught to
upgrade existing calls to aarch64.neon.addp with fp vector arguments, and
we remove the workarounds introduced for GlobalISel in r355865.
This is a more permanent solution to PR40968.
Differential Revision: https://reviews.llvm.org/D59655
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356722 91177308-0d34-0410-b5e6-96231b3b80d8
This was creating a copy of the register the pseudo itself was
def'ing, leaving a copy of an undefined register. I'm not sure how
the verifier is not catching this, but this avoids asserting in a
future change to RegAllocFast
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356716 91177308-0d34-0410-b5e6-96231b3b80d8
The AArch64 test was broken since the result register already had a
set register class, so this test was a no-op. The mapping verify call
would fail because the result size is not the same as the inputs like
in a copy or phi.
The AMDGPU testcases are half broken and introduce illegal VGPR->SGPR
copies which need much more work to handle correctly (same for phis),
but add them as a baseline.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356713 91177308-0d34-0410-b5e6-96231b3b80d8
Under optsize we try to avoid folding immediates into instructions under optsize. But if the immediate is 16-bits or 32 bits, but can be encoded as an 8-bit immediate we don't save enough from disabling the folding unless the immediate has enough uses to make up for the size of the move which is either 3 bytes or 5 bytes since there are no sign extended 8-bit moves. We would also save something if the immediate was a live out of the basic block and thus a move was unavoidable, but that would require a more advanced heuristic than just counting uses.
Note we only avoid folding multiple use immediates into the patterns that use X86ISD::ADD/SUB/XOR/OR/AND/CMP/ADC/SBB nodes and not the more common ISD::ADD/SUB/XOR/OR/AND nodes.
Differential Revision: https://reviews.llvm.org/D59522
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356688 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for scalarizing these intrinsics as well the X86TargetTransformInfo support to avoid scalarizing them in the cases X86 can handle.
I've omitted handling special cases for constant masks for this first pass. Though CodeGenPrepare can constant fold the branch conditions and remove some of the control flow anyway.
Fixes PR40994 and is covers most of PR3666. Might want to implement constant masks to close that.
Differential Revision: https://reviews.llvm.org/D59180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356687 91177308-0d34-0410-b5e6-96231b3b80d8
This is probably a bigger limitation than necessary, but since we don't have any evidence yet
that this transform led to real-world perf improvements rather than regressions, I'm making a
quick, blunt fix.
In the motivating x86 example from:
https://bugs.llvm.org/show_bug.cgi?id=41129
...and shown in the regression test, we want to avoid an extra instruction in the dominating
block because that could be costly.
The x86 LSR test diff is reversing the changes from D57789. There's no evidence that 1 version
is any better than the other yet.
Differential Revision: https://reviews.llvm.org/D59602
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356665 91177308-0d34-0410-b5e6-96231b3b80d8
Added support for dwordx3 for most load/store types, but not DS, and not
intrinsics yet.
SI (gfx6) does not have dwordx3 instructions, so they are not enabled
there.
Some of this patch is from Matt Arsenault, also of AMD.
Differential Revision: https://reviews.llvm.org/D58902
Change-Id: I913ef54f1433a7149da8d72f4af54dbb13436bd9
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356659 91177308-0d34-0410-b5e6-96231b3b80d8
CMPXCHG8B was introduced on i586/pentium generation.
If its not enabled, limit the atomic width to 32 bits so the AtomicExpandPass will expand to lib calls. Unclear if we should be using a different limit for other configs. The default is 1024 and experimentation shows that using an i256 atomic will cause a crash in SelectionDAG.
Differential Revision: https://reviews.llvm.org/D59576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356631 91177308-0d34-0410-b5e6-96231b3b80d8
Machine DCE cannot remove a dead definition if there are non-dbg uses.
A use however can be in the same instruction:
dead %0 = INST %0
Such instructions sometimes created by Detect dead lanes pass.
Allow this instruction to be deleted despite the use if the only use
belongs to the same instruction.
Differential Revision: https://reviews.llvm.org/D59565
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356619 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables the use of lowerShuffleAsBitMask for 512-bit blends before
falling back to move immedate, GPR to k-register, and masked op.
I had to make some changes to support v8i64 when i64 is not a legal type. And to
support floating point types.
This trades a load for the move immediate and GPR move which is higher latency.
But its probably better for register pressure not having to hop through other
register classes. The load+and should play better with LICM and
rematerialization I think.
Differential Revision: https://reviews.llvm.org/D59479
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356618 91177308-0d34-0410-b5e6-96231b3b80d8
The constantness shouldn't change the register bank choice. We also
don't need to restrict this to only indexing VGPRs, since it's
possible to index SGPRs (but SelectionDAG made using this
difficult). Allow directly indexing SGPRs when appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356611 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Implements a new target features section in assembly and object files
that records what features are used, required, and disallowed in
WebAssembly objects. The linker uses this information to ensure that
all objects participating in a link are feature-compatible and records
the set of used features in the output binary for use by optimizers
and other tools later in the toolchain.
The "atomics" feature is always required or disallowed to prevent
linking code with stripped atomics into multithreaded binaries. Other
features are marked used if they are enabled globally or on any
function in a module.
Future CLs will add linker flags for ignoring feature compatibility
checks and for specifying the set of allowed features, implement using
the presence of the "atomics" feature to control the type of memory
and segments in the linked binary, and add front-end flags for
relaxing the linkage policy for atomics.
Reviewers: aheejin, sbc100, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, mgrang, jfb, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356610 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
- Should use `targetconstant` instead of `constant` operand for clamp
bit, which is expected as an immediate operand. Under certain
conditions, such as a common `i1 false` constant is used in other
place and selected before the instruction with clamp bit, register
operand may be added instead of immediate one. Use `targetcosntant` to
enforce that.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59608
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356608 91177308-0d34-0410-b5e6-96231b3b80d8
Petar Avramovic