We would create an instruction but not inserting it.
Not inserting the unused instruction would lead us to verification
failure.
This fixes PR21653.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222659 91177308-0d34-0410-b5e6-96231b3b80d8
With the help of new method readInstruction16() two bytes are read and
decodeInstruction() is called with DecoderTableMicroMips16, if this fails
four bytes are read and decodeInstruction() is called with
DecoderTableMicroMips32.
Differential Revision: http://reviews.llvm.org/D6149
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222648 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches function 'transformVSELECTtoBlendVECTOR_SHUFFLE' how to
convert VSELECT dag nodes to shuffles on targets that do not have SSE4.1.
On pre-SSE4.1 targets, we can still perform blend operations using movss/movsd.
Also, removed a target specific combine that performed a premature lowering of
VSELECT nodes to target specific MOVSS/MOVSD nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222647 91177308-0d34-0410-b5e6-96231b3b80d8
We tried to get the result of DataLayout::getLargestLegalIntTypeSize but
we didn't have a DataLayout. This resulted in opt crashing.
This fixes PR21651.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222645 91177308-0d34-0410-b5e6-96231b3b80d8
r222375 made some improvements to build_vector lowering of v4x32 and v4xf32 into an insertps, but it missed a case where:
1. A single extracted element is used twice.
2. The lower of the two non-zero indexes should be preserved, and the higher should be used for the dest mask.
This caused a crash, since the source value for the insertps ends-up uninitialized.
Differential Revision: http://reviews.llvm.org/D6377
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222635 91177308-0d34-0410-b5e6-96231b3b80d8
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222632 91177308-0d34-0410-b5e6-96231b3b80d8
has a remarkably unique and efficient lowering.
While we get this some of the time already, we miss a few cases and
there wasn't a principled reason we got it. We should at least test
this. v8 already has tests for this pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222607 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes the self-host fail. Note that this commit activates dominator
analysis in the combiner by default (like the original commit did).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222590 91177308-0d34-0410-b5e6-96231b3b80d8
This s_mov_b32 will write to a virtual register from the M0Reg
class and all the ds instructions now take an extra M0Reg explicit
argument.
This change is necessary to prevent issues with the scheduler
mixing together instructions that expect different values in the m0
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222583 91177308-0d34-0410-b5e6-96231b3b80d8
filler such as if delay slot filler have to put NOP instruction into the
delay slot of microMIPS BEQ or BNE instruction which uses the register $0,
then instead of emitting NOP this instruction is replaced by the corresponding
microMIPS compact branch instruction, i.e. BEQZC or BNEZC.
Differential Revision: http://reviews.llvm.org/D3566
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222580 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a feature flag to avoid unaligned 32-byte load/store AVX codegen
for Sandy Bridge and Ivy Bridge. There is no functionality change intended for
those chips. Previously, the absence of AVX2 was being used as a proxy to detect
this feature. But that hindered codegen for AVX-enabled AMD chips such as btver2
that do not have the 32-byte unaligned access slowdown.
Performance measurements are included in PR21541 ( http://llvm.org/bugs/show_bug.cgi?id=21541 ).
Differential Revision: http://reviews.llvm.org/D6355
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222544 91177308-0d34-0410-b5e6-96231b3b80d8
shuffle lowering to allow much better blend matching.
Specifically, with the new structure the code seems clearer to me and we
correctly can hit the cases where merging two 128-bit lanes is a clear
win and can be shuffled cheaply afterward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222539 91177308-0d34-0410-b5e6-96231b3b80d8
a bunch more improvements.
Non-lane-crossing is fine, the key is that lane merging only makes sense
for single-input shuffles. Not sure why I got so turned around here. The
code all works, I was just using the wrong model for it.
This only updates v4 and v8 lowering. The v16 and v32 lowering requires
restructuring the entire check sequence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222537 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch, the DAGCombiner only tried to convert build_vector dag nodes
into shuffles if all operands were either extract_vector_elt or undef.
This patch improves that logic and teaches the DAGCombiner how to deal with
build_vector dag nodes where one or more operands are zero. A build_vector
dag node with some zero operands is turned into a shuffle only if the resulting
shuffle mask is legal for the target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222536 91177308-0d34-0410-b5e6-96231b3b80d8
lanes.
By special casing these we can often either reduce the total number of
shuffles significantly or reduce the number of (high latency on Haswell)
AVX2 shuffles that potentially cross 128-bit lanes. Even when these
don't actually cross lanes, they have much higher latency to support
that. Doing two of them and a blend is worse than doing a single insert
across the 128-bit lanes to blend and then doing a single interleaved
shuffle.
While this seems like a narrow case, it kept cropping up on me and the
difference is *huge* as you can see in many of the test cases. I first
hit this trying to perfectly fix the interleaving shuffle patterns used
by Halide for AVX2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222533 91177308-0d34-0410-b5e6-96231b3b80d8
merging 128-bit subvectors and also shuffling all the elements of those
subvectors. Currently we generate pretty bad code for many of these, but
I'm testing a patch that should dramatically improve this in addition to
making the shuffle lowering robust to other changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222525 91177308-0d34-0410-b5e6-96231b3b80d8
This mirrors r222331, which enabled SeparateConstOffsetFromGEP on AArch64, in
the PowerPC backend. Yields, on a POWER7 machine, a 30% speedup on
SingleSource/Benchmarks/Shootout/nestedloop (this might just be from LICM,
there is a store moved out of the inner loop) and a potential speedup on
MultiSource/Benchmarks/mediabench/mpeg2/mpeg2dec/mpeg2decode. Regardless, it
makes some code look cleaner, and synchronizing the backends in this regard
seems like a generally good thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222504 91177308-0d34-0410-b5e6-96231b3b80d8
The alloca's type is irrelevant, only those types which are used in a
load or store of the exact size of the slice should be considered.
This manifested as an assertion failure when we compared the various
types: we had a size mismatch.
This fixes PR21480.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222499 91177308-0d34-0410-b5e6-96231b3b80d8
Currently LoopUnroll generates a prologue loop before the main loop
body to execute first N%UnrollFactor iterations. Also, this loop is
used if trip-count can overflow - it's determined by a runtime check.
However, we've been mistakenly optimizing this loop to a linear code for
UnrollFactor = 2, not taking into account that it also serves as a safe
version of the loop if its trip-count overflows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222451 91177308-0d34-0410-b5e6-96231b3b80d8
