2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (build_modrm_byte): For instructions with 2
register operands, encode destination in i.rm.regmem if its
RegMem bit is set.
opcodes/
2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.c (i386_optab): Change InvMem to RegMem for mov and
movq. Remove InvMem from sldt, smsw and str.
* i386-opc.h (InvMem): Renamed to ...
(RegMem): Update comments.
(AnyMem): Remove InvMem.
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (md_begin): Use i386_regtab_size to scan
i386_regtab.
(parse_register): Use i386_regtab_size instead of ARRAY_SIZE
on i386_regtab.
opcodes/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.c: Include "libiberty.h".
(i386_regtab): Remove the last entry.
(i386_regtab_size): New.
(i386_float_regtab_size): Likewise.
* i386-opc.h (i386_regtab_size): New.
(i386_float_regtab_size): Likewise.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
* s390-opc.txt ("efpc", "sfpc"): Set to RRE_RR_OPT instruction type.
* s390-opc.c (s390_operands): Add RO_28 as optional gpr.
(INSTR_RRE_RR_OPT, MASK_RRE_RR_OPT): New instruction type for efpc
and sfpc.
* avr-dis.c (comment_start): New variable, contains the prefix to use when
printing addresses in comments.
(print_insn_avr): Set comment_start to an empty space if there is no symbol
table available as the generic address printing code will prefix the
numeric value of the address with 0x.
* mep-*: New support for Toshiba Media Processor (MeP).
* Makefile.am: Add support for MeP.
* configure.in: Likewise.
* disassemble.c: Likewise.
* Makefile.in: Regenerated.
* configure: Regenerated.
2076-02-05 H.J. Lu <hongjiu.lu@intel.com>
* ld-i386/pcrel16.d: Undo the last change.
* ld-x86-64/pcrel16.d: Likewise.
opcodes/
2076-02-05 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_J): Undo the last change. Properly handle 64K
wrap around within the same segment in 16bit mode.
2076-02-02 H.J. Lu <hongjiu.lu@intel.com>
* ld-i386/pcrel16.d: Updated.
* ld-x86-64/pcrel16.d: Likewise.
opcodes/
2076-02-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_J): Mask to 16bit only if there is a data16
prefix.
2076-02-02 H.J. Lu <hongjiu.lu@intel.com>
* doc/binutils.texi (objdump): Document the new addr64 option
for i386 disassembler.
include/
2076-02-02 H.J. Lu <hongjiu.lu@intel.com>
* dis-asm.h (print_i386_disassembler_options): New.
opcodes/
2076-02-02 H.J. Lu <hongjiu.lu@intel.com>
* disassemble.c (disassembler_usage): Call
print_i386_disassembler_options for i386 disassembler.
* i386-dis.c (print_i386_disassembler_options): New.
(print_insn): Support the new addr64 option.
(valid_bo): Add "extract" param. Accept both powerpc and power4
BO fields when disassembling with -Many.
(insert_bo, extract_bo, insert_boe, extract_boe): Adjust valid_bo call.
* archures.c (bfd_mach_cpu32_fido): Rename to bfd_mach_fido.
* bfd-in2.h: Regenerate.
* cpu-m68k.c (arch_info_struct): Use bfd_mach_fido instead of
bfd_mach_cpu32_fido.
(m68k_arch_features): Use fido_a instead of cpu32.
(bfd_m68k_compatible): Reject the combination of Fido and
ColdFire. Accept the combination of CPU32 and Fido with a
warning.
* elf32-m68k.c (elf32_m68k_object_p,
elf32_m68k_merge_private_bfd_data,
elf32_m68k_print_private_bfd_data): Treat Fido as an
architecture by itself.
binutils/
* readelf.c (get_machine_flags): Treat Fido as an architecture
by itself.
gas/
* config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
architecture by itself.
(m68k_ip): Don't issue a warning for tbl instructions on fido.
(m68k_elf_final_processing): Treat Fido as an architecture by
itself.
include/elf/
* m68k.h (EF_M68K_FIDO): New.
(EF_M68K_ARCH_MASK): OR EF_M68K_FIDO.
(EF_M68K_CPU32_FIDO_A, EF_M68K_CPU32_MASK): Remove.
include/opcode/
* m68k.h (m68010up): OR fido_a.
opcodes/
* m68k-opc.c (m68k_opcodes): Replace cpu32 with
cpu32 | fido_a except on tbl instructions.
* config/m68k-parse.h (m68k_register): Add CAC and MBB.
* config/tc-m68k.c (fido_ctrl): New.
(m68k_archs): Use fido_ctrl for -mfidoa.
(m68k_cpus): Use fido_ctrl on fido-*-*.
(m68k_ip): Add support for CAC and MBB.
(init_table): Add CAC and MBB.
opcodes/
* m68k-dis.c (print_insn_arg): Add support for cac and mbb.
* i386-dis.c (Eq): Replaced by ...
(Mq): New. This.
(Ma): Defined with OP_M instead of OP_E.
(grps): Updated cmpxchg8b and vmptrst for Eq -> Mq.
(OP_M): Added bound, cmpxchg8b and vmptrst to bad modrm list.
