instead of using the deprecated offset field of DBG_VALUE.
This has no observable effect on the generated DWARF, but the
assembler comments will look different.
rdar://problem/33580047
llvm-svn: 309773
This change adds the "-O binary" flag which directs llvm-objcopy to
output the object file to the same format as GNU objcopy does when given
the flag "-O binary". This was done by splitting the Object class into
two subclasses ObjectELF and ObjectBianry which each output a different
format but relay on the same code to read in the Object in Object.
Patch by Jake Ehrlich
Differential Revision: https://reviews.llvm.org/D34480
llvm-svn: 309768
With SI_END_CF elimination for some nested control flow we can now
eliminate saved exec register completely by turning a saveexec version
of instruction into just a logical instruction.
Differential Revision: https://reviews.llvm.org/D36007
llvm-svn: 309766
Add a pass to remove redundant S_OR_B64 instructions enabling lanes in
the exec. If two SI_END_CF (lowered as S_OR_B64) come together without any
vector instructions between them we can only keep outer SI_END_CF, given
that CFG is structured and exec bits of the outer end statement are always
not less than exec bit of the inner one.
This needs to be done before the RA to eliminate saved exec bits registers
but after register coalescer to have no vector registers copies in between
of different end cf statements.
Differential Revision: https://reviews.llvm.org/D35967
llvm-svn: 309762
If SCEV can prove that the backedge taken count for a loop is zero, it does not
need to "understand" a recursive PHI to compute its exiting value.
This should fix PR33885.
llvm-svn: 309758
`llc -march` is problematic because it only switches the target
architecture, but leaves the operating system unchanged. This
occasionally leads to indeterministic tests because the OS from
LLVM_DEFAULT_TARGET_TRIPLE is used.
However we can simply always use `llc -mtriple` instead. This changes
all the tests to do this to avoid people using -march when they copy and
paste parts of tests.
See also the discussion in https://reviews.llvm.org/D35287
llvm-svn: 309755
`llc -march` is problematic because it only switches the target
architecture, but leaves the operating system unchanged. This
occasionally leads to indeterministic tests because the OS from
LLVM_DEFAULT_TARGET_TRIPLE is used.
However we can simply always use `llc -mtriple` instead. This changes
all the tests to do this to avoid people using -march when they copy and
paste parts of tests.
This patch:
- Removes -march if the .ll file already has a matching `target triple`
directive or -mtriple argument.
- In all other cases changes -march=ppc32/-march=ppc64 to
-mtriple=ppc32--/-mtriple=ppc64--
See also the discussion in https://reviews.llvm.org/D35287
llvm-svn: 309754
In the last half-dozen commits to LLVM I removed code that became dead
after removing the offset parameter from llvm.dbg.value gradually
proceeding from IR towards the backend. Before I can move on to
DwarfDebug and friends there is one last side-called offset I need to
remove: This patch modifies PrologEpilogInserter's use of the
DBG_VALUE's offset argument to use a DIExpression instead. Because the
PrologEpilogInserter runs at the Machine level I had to play a little
trick with a named llvm.dbg.mir node to get the DIExpressions to print
in MIR dumps (which print the llvm::Module followed by the
MachineFunction dump).
I also had to add rudimentary DwarfExpression support to CodeView and
as a side-effect also fixed a bug (CodeViewDebug::collectVariableInfo
was supposed to give up on variables with complex DIExpressions, but
would fail to do so for fragments, which are also modeled as
DIExpressions).
With this last holdover removed we will have only one canonical way of
representing offsets to debug locations which will simplify the code
in DwarfDebug (and future versions of CodeViewDebug once it starts
handling more complex expressions) and make it easier to reason about.
This patch is NFC-ish: All test case changes are for assembler
comments and the binary output does not change.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D36125
llvm-svn: 309751
The coverage tool needs to know which slice to look at when it's handed
a universal binary. Some projects need to look at aggregate coverage
reports for a variety of slices in different binaries: this patch adds
support for these kinds of projects to llvm-cov.
rdar://problem/33579007
llvm-svn: 309747
The previous attempt, which made do with a single offset in
computeCalleeSaveRegisterPairs, wasn't quite enough. The previous
attempt only worked as long as CombineSPBump == true (since the
offset would be adjusted later in fixupCalleeSaveRestoreStackOffset).
Instead include the size for the fixed stack area used for win64
varargs in calculations in emitPrologue/emitEpilogue. The stack
consists of mainly three parts;
- AFI->getLocalStackSize()
- AFI->getCalleeSavedStackSize()
- FixedObject
Most of the places in the code which previously used the CSStackSize
now use PrologueSaveSize instead, which is the sum of the latter
two, while some cases which need exactly the middle one use
AFI->getCalleeSavedStackSize() explicitly instead of a local variable.
In addition to moving the offsetting into emitPrologue/emitEpilogue
(which fixes functions with CombineSPBump == false), also set the
frame pointer to point to the right location, where the frame pointer
and link register actually are stored. In addition to the prologue/epilogue,
this also requires changes to resolveFrameIndexReference.
Add tests for a function that keeps a frame pointer and another one
that uses a VLA.
Differential Revision: https://reviews.llvm.org/D35919
llvm-svn: 309744
The src0 register must match src1 or src2, but if these
were undefined they could end up using different implicit_defed
virtual registers. Force these to use one undef vreg or pick the
defined other register.
Also fixes producing invalid nodes without the right number of
inputs when src2 is undef.
llvm-svn: 309743
Includes a hack to fix the type selected for
the GlobalAddress of the function, which will be
fixed by changing the default datalayout to use
generic pointers for 0.
llvm-svn: 309732
Summary:
We already have information about static alloca stack locations in our
side table. Emitting instructions for them is inefficient, and it only
happens when the address of the alloca has been materialized within the
current block, which isn't often.
Reviewers: aprantl, probinson, dblaikie
Subscribers: jfb, dschuff, sbc100, jgravelle-google, hiraditya, llvm-commits, aheejin
Differential Revision: https://reviews.llvm.org/D36117
llvm-svn: 309729
Improves atom scheduler test coverage (to make it easier to upgrade them for PR32431).
Merged SSE_VEC_BIT_ITINS_P + SSE_BIT_ITINS_P as we were interchanging between them.
llvm-svn: 309715
Summary: The 64-bit 'and' with immediate instruction only supports a 32-bit immediate. So for larger constants we have to load the constant into a register first. If the immediate happens to be a mask we can use the BEXTRI instruction to perform the masking. We already do something similar using the BZHI instruction from the BMI2 instruction set.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36129
llvm-svn: 309706
Improves atom scheduler test coverage (to make it easier to upgrade them for PR32431).
Checked on Agner that these actually match the UNPACK schedules, but better to include a separate class
llvm-svn: 309701
This moves all the bmi2 specific intrinsics to a separate test file and adds a bmi1 only command line to the existing bmi test.
This will allow us to see the missed opportunity to use bextr to handle 64-bit 'and' with a large mask. This will be improved in an upcoming patch.
llvm-svn: 309700
Summary:
FEntryInserter pass unconditionally derefs the first Instruction
in the first Basic Block. The pass crashes when the first
BasicBlock is empty. Fix the crash by not dereferencing the basic
Block iterator. This fixes an issue observed when building Linux kernel
4.4 with clang.
Fixes PR33971.
Reviewers: hfinkel, niravd, dblaikie
Reviewed By: niravd
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D35979
llvm-svn: 309694
We were already using the 32 bit element opcode if BWI isn't enabled, but there's no reason to change opcode if we have BWI. We will still use the 8/16 opcodes for masked stores though.
This allows us to use the aligned opcode when we can which makes our test output more consistent between different modes. It also reduces the number of isel patterns we need.
This is a slight inconsistency with loads which default to 64 bit element opcodes. I'll probably rectify that in a future patch.
Differential Revision: https://reviews.llvm.org/D35978
llvm-svn: 309693
Summary:
As far as I can tell the earlier call getLimitedValue will guaranteed ShiftAmt is saturated to BitWidth-1 preventing it from ever being equal or greater than BitWidth.
At one point in the past the getLimitedValue call was only passed BitWidth not BitWidth - 1. This would have allowed the equality case to get here. And in fact this check was initially added as just BitWidth == ShiftAmt, but was changed shortly after to include > which should have never been possible.
Reviewers: spatel, majnemer, davide
Reviewed By: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36123
llvm-svn: 309690
Summary:
As we are in the process of changing the behavior of how the post-dominator tree
is computed, make sure we have some more test coverage in this area.
Current inconsistencies:
- Newly unreachable nodes are not added as new roots, in case the PDT is updated
but not rebuilt.
- Newly unreachable loops are not added to the CFG at all (neither when
building from scratch nor when updating the CFG). This is inconsistent with
the fact that unreachables are added to the PDT, but unreachable loops not.
On the other side, PDT relationships are not loosened at the moment in
cases where new unreachable loops are built.
This commit is providing additional test coverage for
https://reviews.llvm.org/D35851
Reviewers: dberlin, kuhar
Reviewed By: kuhar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36107
llvm-svn: 309684
This patch enables control flow optimization for
variations of BBIT instruction. In this case
optimization removes unnecessary branch after
BBIT instruction.
Differential Revision: https://reviews.llvm.org/D35359
llvm-svn: 309679
Certain operations require vector of i1 values. However, for Hexagon
architecture compatibility, they need to be represented as vector of i8.
Patch by Suyog Sarda.
llvm-svn: 309677
