The test's output doesn't change, but this ensures
this is actually hit with a different address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191701 91177308-0d34-0410-b5e6-96231b3b80d8
when it was actually a Constant*.
There are quite a few other casts to Instruction that might have the same problem,
but this is the only one I have a test case for.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191668 91177308-0d34-0410-b5e6-96231b3b80d8
Currently foldSelectICmpAndOr asserts if the "or" involves a vector
containing several of the same power of two. We can easily avoid this by
only performing the fold on integer types, like foldSelectICmpAnd does.
Fixes <rdar://problem/15012516>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191552 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the command line argument "struct-path-tbaa" since we should not depend
on command line argument to decide which format the IR file is using. Instead,
we check the first operand of the tbaa tag node, if it is a MDNode, we treat
it as struct-path aware TBAA format, otherwise, we treat it as scalar TBAA
format.
When clang starts to use struct-path aware TBAA format no matter whether
struct-path-tbaa is no, and we can auto-upgrade existing bc files, the support
for scalar TBAA format can be dropped.
Existing testing cases are updated to use the struct-path aware TBAA format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191538 91177308-0d34-0410-b5e6-96231b3b80d8
The GEP pattern is what SCEV expander emits for "ugly geps". The latter is what
you get for pointer subtraction in C code. The rest of instcombine already
knows how to deal with that so just canonicalize on that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191090 91177308-0d34-0410-b5e6-96231b3b80d8
If "C1/X" were having multiple uses, the only benefit of this
transformation is to potentially shorten critical path. But it is at the
cost of instroducing additional div.
The additional div may or may not incur cost depending on how div is
implemented. If it is implemented using Newton–Raphson iteration, it dosen't
seem to incur any cost (FIXME). However, if the div blocks the entire
pipeline, that sounds to be pretty expensive. Let CodeGen to take care
this transformation.
This patch sees 6% on a benchmark.
rdar://15032743
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191037 91177308-0d34-0410-b5e6-96231b3b80d8
If address space 0 was smaller than the address space
in a constant inttoptr/ptrtoint pair, the wrong mask size
would be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190899 91177308-0d34-0410-b5e6-96231b3b80d8
To avoid regressions with bitfield optimizations, this slicing should take place
later, like ISel time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190891 91177308-0d34-0410-b5e6-96231b3b80d8
Some of this code is no longer necessary since int<->ptr casts are no
longer occur as of r187444.
This also fixes handling vectors of pointers, and adds a bunch of new
testcases for vectors and address spaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190885 91177308-0d34-0410-b5e6-96231b3b80d8
other in memory.
The motivation was to get rid of truncate and shift right instructions that get
in the way of paired load or floating point load.
E.g.,
Consider the following example:
struct Complex {
float real;
float imm;
};
When accessing a complex, llvm was generating a 64-bits load and the imm field
was obtained by a trunc(lshr) sequence, resulting in poor code generation, at
least for x86.
The idea is to declare that two load instructions is the canonical form for
loading two arithmetic type, which are next to each other in memory.
Two scalar loads at a constant offset from each other are pretty
easy to detect for the sorts of passes that like to mess with loads.
<rdar://problem/14477220>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190870 91177308-0d34-0410-b5e6-96231b3b80d8
Several architectures use the same instruction to perform both a comparison and
a subtract. The instruction selection framework does not allow to consider
different basic blocks to expose such fusion opportunities.
Therefore, these instructions are “merged” by CSE at MI IR level.
To increase the likelihood of CSE to apply in such situation, we reorder the
operands of the comparison, when they have the same complexity, so that they
matches the order of the most frequent subtract.
E.g.,
icmp A, B
...
sub B, A
<rdar://problem/14514580>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190352 91177308-0d34-0410-b5e6-96231b3b80d8
Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom),
field 12 of DICompositeType (ContainingType), fields 2, 7, 12 of DISubprogram
(Context, Type, ContainingType).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190205 91177308-0d34-0410-b5e6-96231b3b80d8
"(icmp op i8 A, B)" is equivalent to "(icmp op i8 (A & 0xff), B)" as a
degenerate case. Allowing this as a "masked" comparison when analysing "(icmp)
&/| (icmp)" allows us to combine them in more cases.
rdar://problem/7625728
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189931 91177308-0d34-0410-b5e6-96231b3b80d8
Even in cases which aren't universally optimisable like "(A & B) != 0 && (A &
C) != 0", the masks can make one of the comparisons completely redundant. In
this case, since we've gone to the effort of spotting masked comparisons we
should combine them.
rdar://problem/7625728
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189930 91177308-0d34-0410-b5e6-96231b3b80d8
The existing code missed some edge cases when e.g. we're going to emit sqrtf but
only the availability of sqrt was checked. This happens on odd platforms like
windows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189724 91177308-0d34-0410-b5e6-96231b3b80d8
PR17026. Also avoid undefined shifts and shift amounts larger than 64 bits
(those are always undef because we can't represent integer types that large).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189672 91177308-0d34-0410-b5e6-96231b3b80d8
DICompositeType will have an identifier field at position 14. For now, the
field is set to null in DIBuilder.
For DICompositeTypes where the template argument field (the 13th field)
was optional, modify DIBuilder to make sure the template argument field is set.
Now DICompositeType has 15 fields.
Update DIBuilder to use NULL instead of "i32 0" for null value of a MDNode.
Update verifier to check that DICompositeType has 15 fields and the last
field is null or a MDString.
Update testing cases to include an extra field for DICompositeType.
The identifier field will be used by type uniquing so a front end can
genearte a DICompositeType with a unique identifer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189282 91177308-0d34-0410-b5e6-96231b3b80d8
Also fix it calculating the wrong value. The struct index
is not a ConstantInt, so it was being interpreted as an array
index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188713 91177308-0d34-0410-b5e6-96231b3b80d8
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188513 91177308-0d34-0410-b5e6-96231b3b80d8
When both constants are positive or both constants are negative,
InstCombine already simplifies comparisons like this, but when
it's exactly zero and -1, the operand sorting ends up reversed
and the pattern fails to match. Handle that special case.
Follow up for rdar://14689217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188512 91177308-0d34-0410-b5e6-96231b3b80d8
This path wasn't tested before without a datalayout,
so add some more tests and re-run with and without one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188507 91177308-0d34-0410-b5e6-96231b3b80d8
Use the pointer size if datalayout is available.
Use i64 if it's not, which is consistent with what other
places do when the pointer size is unknown.
The test doesn't really test this in a useful way
since it will be transformed to that later anyway,
but this now tests it for non-zero arrays and when
datalayout isn't available. The cases in
visitGetElementPtrInst should save an extra re-visit to
the newly created GEP since it won't need to cleanup after
itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188339 91177308-0d34-0410-b5e6-96231b3b80d8
Various tests had sprung up over the years which had --check-prefix=ABC on the
RUN line, but "CHECK-ABC:" later on. This happened to work before, but was
strictly incorrect. FileCheck is getting stricter soon though.
Patch by Ron Ofir.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188173 91177308-0d34-0410-b5e6-96231b3b80d8
These functions used to assume that the lsb of an integer corresponds
to vector element 0, whereas for big-endian it's the other way around:
the msb is in the first element and the lsb is in the last element.
Fixes MultiSource/Benchmarks/mediabench/gsm/toast for z.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188155 91177308-0d34-0410-b5e6-96231b3b80d8
Call into ComputeMaskedBits to figure out which bits are set on both add
operands and determine if the value is a power-of-two-or-zero or not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187445 91177308-0d34-0410-b5e6-96231b3b80d8
It will now only convert the arguments / return value and call
the underlying function if the types are able to be bitcasted.
This avoids using fp<->int conversions that would occur before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187444 91177308-0d34-0410-b5e6-96231b3b80d8
Also always add DIType, DISubprogram and DIGlobalVariable to the list
in DebugInfoFinder without checking them, so we can verify them later
on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187285 91177308-0d34-0410-b5e6-96231b3b80d8
also worthwhile for it to look through FP extensions and truncations, whose
application commutes with fneg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187249 91177308-0d34-0410-b5e6-96231b3b80d8
This conversion was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)define\([^@]*\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3define\4@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186269 91177308-0d34-0410-b5e6-96231b3b80d8
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186268 91177308-0d34-0410-b5e6-96231b3b80d8
(add nsw x, (and x, y)) isn't a power of two if x is zero, it's zero
(add nsw x, (xor x, y)) isn't a power of two if y has bits set that aren't set in x
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185954 91177308-0d34-0410-b5e6-96231b3b80d8
The following transforms are valid if -C is a power of 2:
(icmp ugt (xor X, C), ~C) -> (icmp ult X, C)
(icmp ult (xor X, C), -C) -> (icmp uge X, C)
These are nice, they get rid of the xor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185915 91177308-0d34-0410-b5e6-96231b3b80d8
Back in r179493 we determined that two transforms collided with each
other. The fix back then was to reorder the transforms so that the
preferred transform would give it a try and then we would try the
secondary transform. However, it was noted that the best approach would
canonicalize one transform into the other, removing the collision and
allowing us to optimize IR given to us in that form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185808 91177308-0d34-0410-b5e6-96231b3b80d8
functions. Make the function attributes pass add it to known library functions
and when it can deduce it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185735 91177308-0d34-0410-b5e6-96231b3b80d8
This transform was originally added in r185257 but later removed in
r185415. The original transform would create instructions speculatively
and then discard them if the speculation was proved incorrect. This has
been replaced with a scheme that splits the transform into two parts:
preflight and fold. While we preflight, we build up fold actions that
inform the folding stage on how to act.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185667 91177308-0d34-0410-b5e6-96231b3b80d8
I'm reverting this commit because:
1. As discussed during review, it needs to be rewritten (to avoid creating and
then deleting instructions).
2. This is causing optimizer crashes. Specifically, I'm seeing things like
this:
While deleting: i1 %
Use still stuck around after Def is destroyed: <badref> = select i1 <badref>, i32 0, i32 1
opt: /src/llvm-trunk/lib/IR/Value.cpp:79: virtual llvm::Value::~Value(): Assertion `use_empty() && "Uses remain when a value is destroyed!"' failed.
I'd guess that these will go away once we're no longer creating/deleting
instructions here, but just in case, I'm adding a regression test.
Because the code is bring rewritten, I've just XFAIL'd the original regression test. Original commit message:
InstCombine: Be more agressive optimizing 'udiv' instrs with 'select' denoms
Real world code sometimes has the denominator of a 'udiv' be a
'select'. LLVM can handle such cases but only when the 'select'
operands are symmetric in structure (both select operands are a constant
power of two or a left shift, etc.). This falls apart if we are dealt a
'udiv' where the code is not symetric or if the select operands lead us
to more select instructions.
Instead, we should treat the LHS and each select operand as a distinct
divide operation and try to optimize them independently. If we can
to simplify each operation, then we can replace the 'udiv' with, say, a
'lshr' that has a new select with a bunch of new operands for the
select.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185415 91177308-0d34-0410-b5e6-96231b3b80d8
Inserting a zext or trunc is sufficient. This pattern is somewhat common in
LLVM's pointer mangling code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185270 91177308-0d34-0410-b5e6-96231b3b80d8
Changing the sign when comparing the base pointer would introduce all
sorts of unexpected things like:
%gep.i = getelementptr inbounds [1 x i8]* %a, i32 0, i32 0
%gep2.i = getelementptr inbounds [1 x i8]* %b, i32 0, i32 0
%cmp.i = icmp ult i8* %gep.i, %gep2.i
%cmp.i1 = icmp ult [1 x i8]* %a, %b
%cmp = icmp ne i1 %cmp.i, %cmp.i1
ret i1 %cmp
into:
%cmp.i = icmp slt [1 x i8]* %a, %b
%cmp.i1 = icmp ult [1 x i8]* %a, %b
%cmp = xor i1 %cmp.i, %cmp.i1
ret i1 %cmp
By preserving the original sign, we now get:
ret i1 false
This fixes PR16483.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185259 91177308-0d34-0410-b5e6-96231b3b80d8
Real world code sometimes has the denominator of a 'udiv' be a
'select'. LLVM can handle such cases but only when the 'select'
operands are symmetric in structure (both select operands are a constant
power of two or a left shift, etc.). This falls apart if we are dealt a
'udiv' where the code is not symetric or if the select operands lead us
to more select instructions.
Instead, we should treat the LHS and each select operand as a distinct
divide operation and try to optimize them independently. If we can
to simplify each operation, then we can replace the 'udiv' with, say, a
'lshr' that has a new select with a bunch of new operands for the
select.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185257 91177308-0d34-0410-b5e6-96231b3b80d8
We may, after other optimizations, find ourselves with IR that looks
like:
%shl = shl i32 1, %y
%cmp = icmp ult i32 %shl, 32
Instead, we should just compare the shift count:
%cmp = icmp ult i32 %y, 5
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185242 91177308-0d34-0410-b5e6-96231b3b80d8
No functionality change.
It should suffice to check the type of a debug info metadata, instead of
calling Verify. For cases where we know the type of a DI metadata, use
assert.
Also update testing cases to make them conform to the format of DI classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185135 91177308-0d34-0410-b5e6-96231b3b80d8
The Builtin attribute is an attribute that can be placed on function call site that signal that even though a function is declared as being a builtin,
rdar://problem/13727199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185049 91177308-0d34-0410-b5e6-96231b3b80d8
index greater than the size of the vector is invalid. The shuffle may be
shrinking the size of the vector. Fixes a crash!
Also drop the maximum recursion depth of the safety check for this
optimization to five.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183080 91177308-0d34-0410-b5e6-96231b3b80d8
as the BinaryOperator, *not* in the block where the IRBuilder is currently
inserting into. Fixes a bug where scalarizePHI would create instructions
that would not dominate all uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182639 91177308-0d34-0410-b5e6-96231b3b80d8
The earlier change list introduced the following inst combines:
B * (uitofp i1 C) —> select C, B, 0
A * (1 - uitofp i1 C) —> select C, 0, A
select C, 0, B + select C, A, 0 —> select C, A, B
Together these 3 changes would simplify :
A * (1 - uitofp i1 C) + B * uitofp i1 C
down to :
select C, B, A
In practice we found that the first two substitutions can have a
negative effect on performance, because they reduce opportunities to
use FMA contractions; between the two options FMAs are often the
better choice. This change list amends the previous one to enable
just these inst combines:
select C, B, 0 + select C, 0, A —> select C, B, A
A * (1 - uitofp i1 C) + B * uitofp i1 C —> select C, B, A
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182499 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful if something that looks like (x & (1 << y)) ? 64 : 32 is
the divisor in a modulo operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182200 91177308-0d34-0410-b5e6-96231b3b80d8
There are two transforms in visitUrem that conflict with each other.
*) One, if a divisor is a power of two, subtracts one from the divisor
and turns it into a bitwise-and.
*) The other unwraps both operands if they are surrounded by zext
instructions.
Flipping the order allows the subtraction to go beneath the sign
extension.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181668 91177308-0d34-0410-b5e6-96231b3b80d8
The shift amount may be larger than the type leading to undefined behavior.
Limit the transform to constant shift amounts. While there update the bits to
clear in the result which may enable additional optimizations.
PR15959.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181604 91177308-0d34-0410-b5e6-96231b3b80d8
That's obviously wrong. Conservatively restrict it to the sign bit, which
matches the original intention of this analysis. Fixes PR15940.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181518 91177308-0d34-0410-b5e6-96231b3b80d8
A * (1 - (uitofp i1 C)) -> select C, 0, A
B * (uitofp i1 C) -> select C, B, 0
select C, 0, A + select C, B, 0 -> select C, B, A
These come up in code that has been hand-optimized from a select to a linear blend,
on platforms where that may have mattered. We want to undo such changes
with the following transform:
A*(1 - uitofp i1 C) + B*(uitofp i1 C) -> select C, A, B
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181216 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r180802
There's ongoing discussion about whether this is the right place to make
this transformation. Reverting for now while we figure it out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180834 91177308-0d34-0410-b5e6-96231b3b80d8
Always fold a shuffle-of-shuffle into a single shuffle when there's only one
input vector in the first place. Continue to be more conservative when there's
multiple inputs.
rdar://13402653
PR15866
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180802 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes the optimization introduced in r179748 and reverted in r179750.
While the optimization was sound, it did not properly respect differences in
bit-width.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180777 91177308-0d34-0410-b5e6-96231b3b80d8
One performs: (X == 13 | X == 14) -> X-13 <u 2
The other: (A == C1 || A == C2) -> (A & ~(C1 ^ C2)) == C1
The problem is that there are certain values of C1 and C2 that
trigger both transforms but the first one blocks out the second,
this generates suboptimal code.
Reordering the transforms should be better in every case and
allows us to do interesting stuff like turn:
%shr = lshr i32 %X, 4
%and = and i32 %shr, 15
%add = add i32 %and, -14
%tobool = icmp ne i32 %add, 0
into:
%and = and i32 %X, 240
%tobool = icmp ne i32 %and, 224
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179493 91177308-0d34-0410-b5e6-96231b3b80d8
When trying to collapse sequences of insertelement/extractelement
instructions into single shuffle instructions, there is one specific
case where the Instruction Combiner wrongly updates the resulting
Mask of shuffle indexes.
The problem is in function CollectShuffleElments.
If we have a sequence of insert/extract element instructions
like the one below:
%tmp1 = extractelement <4 x float> %LHS, i32 0
%tmp2 = insertelement <4 x float> %RHS, float %tmp1, i32 1
%tmp3 = extractelement <4 x float> %RHS, i32 2
%tmp4 = insertelement <4 x float> %tmp2, float %tmp3, i32 3
Where:
. %RHS will have a mask of [4,5,6,7]
. %LHS will have a mask of [0,1,2,3]
The Mask of shuffle indexes is wrongly computed to [4,1,6,7]
instead of [4,0,6,7].
When analyzing %tmp2 in order to compute the Mask for the
resulting shuffle instruction, the algorithm forgets to update
the mask index at position 1 with the index associated to the
element extracted from %LHS by instruction %tmp1.
Patch by Andrea DiBiagio!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179291 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 342d92c7a0.
Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178215 91177308-0d34-0410-b5e6-96231b3b80d8
This is just the basic groundwork for supporting DW_TAG_imported_module but I
wanted to commit this before pushing support further into Clang or LLVM so that
this rather churny change is isolated from the rest of the work. The major
churn here is obviously adding another field (within the common DIScope prefix)
to all DIScopes (files, classes, namespaces, lexical scopes, etc). This should
be the last big churny change needed for DW_TAG_imported_module/using directive
support/PR14606.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178099 91177308-0d34-0410-b5e6-96231b3b80d8
The problem is that the code mistakenly took for granted that following constructor
is able to create an APFloat from a *SIGNED* integer:
APFloat::APFloat(const fltSemantics &ourSemantics, integerPart value)
rdar://13486998
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177906 91177308-0d34-0410-b5e6-96231b3b80d8
This simplification happens at 2 places :
- using the nsw attribute when the shl / mul is used by a sign test
- when the shl / mul is compared for (in)equality to zero
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177856 91177308-0d34-0410-b5e6-96231b3b80d8
The original code used i32, and i64 if legal. This introduced unneeded
casts when they aren't legal, or when the index variable i has another
type. In order of preference: try to use i's type; use the smallest
fitting legal type (using an added DataLayout method); default to i32.
A testcase checks that this works when the index gep operand is i16.
Patch by : Ahmed Bougacha <ahmed.bougacha@gmail.com>
Reviewed by : Duncan
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177712 91177308-0d34-0410-b5e6-96231b3b80d8
The simplify-libcalls pass implemented a doInitialization hook to infer
function prototype attributes for well-known functions. Given that the
simplify-libcalls pass is going away *and* that the functionattrs pass
is already in place to deduce function attributes, I am moving this logic
to the functionattrs pass. This approach was discussed during patch
review:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20121126/157465.html.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177619 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first step to making all DIScopes have a common metadata prefix (so
that things (using directives, for example) that can appear in any scope can be
added to that common prefix). DIFile is itself a DIScope so the common prefix
of all DIScopes cannot be a DIFile - instead it's the raw filename/directory
name pair.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177239 91177308-0d34-0410-b5e6-96231b3b80d8
Rules include:
1)1 x*y +/- x*z => x*(y +/- z)
(the order of operands dosen't matter)
2) y/x +/- z/x => (y +/- z)/x
The transformation is disabled if the new add/sub expr "y +/- z" is a
denormal/naz/inifinity.
rdar://12911472
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177088 91177308-0d34-0410-b5e6-96231b3b80d8
This is the next step towards making the metadata for DIScopes have a common
prefix rather than having to delegate based on their tag type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176913 91177308-0d34-0410-b5e6-96231b3b80d8
These cases were found by further work to remove support for debug info
versioning. Common cleanups (other than changing the version info in the tag
field) included adding the last parameter to compile_units (recently added for
fission support) and other cases of trailing fields in lexical blocks, compile
units, and subprograms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176834 91177308-0d34-0410-b5e6-96231b3b80d8
When considering folding a bitcast of an alloca into the alloca itself,
make sure we don't shrink the amount of memory being allocated, or
things rapidly go sideways.
rdar://13324424
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176547 91177308-0d34-0410-b5e6-96231b3b80d8
This adds minimalistic support for PHI nodes to llvm.objectsize() evaluation
fingers crossed so that it does break clang boostrap again..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176408 91177308-0d34-0410-b5e6-96231b3b80d8
The instcombine recognized pattern looks like:
a = b * c
d = a +/- Cst
or
a = b * c
d = Cst +/- a
When creating the new operands for fadd or fsub instruction following the related fmul, the first operand was created with the second original operand (M0 was created with C1) and the second with the first (M1 with Opnd0).
The fix consists in creating the new operands with the appropriate original operand, i.e., M0 with Opnd0 and M1 with C1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176300 91177308-0d34-0410-b5e6-96231b3b80d8
Listing all of the attributes for the callee of a call/invoke instruction is way
too much and makes the IR unreadable. Use references to attributes instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175877 91177308-0d34-0410-b5e6-96231b3b80d8
(or (bool?A:B),(bool?C:D)) --> (bool?(or A,C):(or B,D))
By the time the OR is visited, both the SELECTs have been visited and not
optimized and the OR itself hasn't been transformed so we do this transform in
the hopes that the new ORs will be optimized.
The transform is explicitly disabled for vector-selects until "codegen matures
to handle them better".
Patch by Muhammad Tauqir!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175380 91177308-0d34-0410-b5e6-96231b3b80d8
It enables to work with a smaller constant, which is target friendly for those which can compare to immediates.
It also avoids inserting a shift in favor of a trunc, which can be free on some targets.
This used to work until LLVM-3.1, but regressed with the 3.2 release.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175270 91177308-0d34-0410-b5e6-96231b3b80d8
We use constant folding to see if an intrinsic evaluates to the same value as a
constant that we know. If we don't take the undefinedness into account we get a
value that doesn't match the actual implementation, and miscompiled code.
This was uncovered by Chandler's simplifycfg changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173356 91177308-0d34-0410-b5e6-96231b3b80d8
Okay, here's how to reproduce the problem:
1) Build a Release (or Release+Asserts) version of clang in the normal way.
2) Using the clang & clang++ binaries from (1), build a Release (or
Release+Asserts) version of the same sources, but this time enable LTO ---
specify the `-flto' flag on the command line.
3) Run the ARC migrator tests:
$ arcmt-test --args -triple x86_64-apple-darwin10 -fsyntax-only -x objective-c++ ./src/tools/clang/test/ARCMT/cxx-rewrite.mm
You'll see that the output isn't correct (the whitespace is off).
The mis-compile is in the function `RewriteBuffer::RemoveText' in the
clang/lib/Rewrite/Core/Rewriter.cpp file. When that function and RewriteRope.cpp
are compiled with LTO and the `arcmt-test' executable is regenerated, you'll see
the error. When those files are not LTO'ed, then the output of the `arcmt-test'
is fine.
It is *really* hard to get a testcase out of this. I'll file a PR with what I
have currently.
--- Reverse-merging r172363 into '.':
U include/llvm/Analysis/MemoryBuiltins.h
U lib/Analysis/MemoryBuiltins.cpp
--- Reverse-merging r171325 into '.':
U test/Transforms/InstCombine/objsize.ll
G include/llvm/Analysis/MemoryBuiltins.h
G lib/Analysis/MemoryBuiltins.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172756 91177308-0d34-0410-b5e6-96231b3b80d8
some optimization opportunities (in the enclosing supper-expressions).
rule 1. (-0.0 - X ) * Y => -0.0 - (X * Y)
if expression "-0.0 - X" has only one reference.
rule 2. (0.0 - X ) * Y => -0.0 - (X * Y)
if expression "0.0 - X" has only one reference, and
the instruction is marked "noSignedZero".
2. Eliminate negation (The compiler was already able to handle these
opt if the 0.0s are replaced with -0.0.)
rule 3: (0.0 - X) * (0.0 - Y) => X * Y
rule 4: (0.0 - X) * C => X * -C
if the expr is flagged "noSignedZero".
3.
Rule 5: (X*Y) * X => (X*X) * Y
if X!=Y and the expression is flagged with "UnsafeAlgebra".
The purpose of this transformation is two-fold:
a) to form a power expression (of X).
b) potentially shorten the critical path: After transformation, the
latency of the instruction Y is amortized by the expression of X*X,
and therefore Y is in a "less critical" position compared to what it
was before the transformation.
4. Remove the InstCombine code about simplifiying "X * select".
The reasons are following:
a) The "select" is somewhat architecture-dependent, therefore the
higher level optimizers are not able to precisely predict if
the simplification really yields any performance improvement
or not.
b) The "select" operator is bit complicate, and tends to obscure
optimization opportunities. It is btter to keep it as low as
possible in expr tree, and let CodeGen to tackle the optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172551 91177308-0d34-0410-b5e6-96231b3b80d8
---------------------------------------------------------------------------
C_A: reassociation is allowed
C_R: reciprocal of a constant C is appropriate, which means
- 1/C is exact, or
- reciprocal is allowed and 1/C is neither a special value nor a denormal.
-----------------------------------------------------------------------------
rule1: (X/C1) / C2 => X / (C2*C1) (if C_A)
=> X * (1/(C2*C1)) (if C_A && C_R)
rule 2: X*C1 / C2 => X * (C1/C2) if C_A
rule 3: (X/Y)/Z = > X/(Y*Z) (if C_A && at least one of Y and Z is symbolic value)
rule 4: Z/(X/Y) = > (Z*Y)/X (similar to rule3)
rule 5: C1/(X*C2) => (C1/C2) / X (if C_A)
rule 6: C1/(X/C2) => (C1*C2) / X (if C_A)
rule 7: C1/(C2/X) => (C1/C2) * X (if C_A)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172488 91177308-0d34-0410-b5e6-96231b3b80d8
- this expression is explicitly marked no-signed-zero, or
- no-signed-zero of this expression can be derived from some context.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171922 91177308-0d34-0410-b5e6-96231b3b80d8
o. X/C1 * C2 => X * (C2/C1) (if C2/C1 is neither special FP nor denormal)
o. X/C1 * C2 -> X/(C1/C2) (if C2/C1 is either specical FP or denormal, but C1/C2 is a normal Fp)
Let MDC denote multiplication or dividion with one & only one operand being a constant
o. (MDC ± C1) * C2 => (MDC * C2) ± (C1 * C2)
(so long as the constant-folding doesn't yield any denormal or special value)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171793 91177308-0d34-0410-b5e6-96231b3b80d8
turning a code like this:
if (foo)
free(foo)
into that:
free(foo)
Move a call to free from basic block FB into FB's predecessor, P,
when the path from P to FB is taken only if the argument of free is
not equal to NULL.
Some restrictions apply on P and FB to be sure that this code motion
is profitable. Namely:
1. FB must have only one predecessor P.
2. FB must contain only the call to free plus an unconditional
branch to S.
3. P's successors are FB and S.
Because of 1., we will not increase the code size when moving the call
to free from FB to P.
Because of 2., FB will be empty after the move.
Because of 2. and 3., P's branch instruction becomes useless, so as FB
(simplifycfg will do the job).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171762 91177308-0d34-0410-b5e6-96231b3b80d8
This is done to avoid odd test failures, like the one fixed in r171243.
My previous regex was not good enough to find these.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171343 91177308-0d34-0410-b5e6-96231b3b80d8
When the least bit of C is greater than V, (x&C) must be greater than V
if it is not zero, so the comparison can be simplified.
Although this was suggested in Target/X86/README.txt, it benefits any
architecture with a directly testable form of AND.
Patch by Kevin Schoedel
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170576 91177308-0d34-0410-b5e6-96231b3b80d8
This assumes (1 << n) is always not zero. Consider n is greater than word size.
Although I know it is undefined, this transforms undefined behavior hidden.
This led clang unexpected behavior with some failures. I will investigate to fix undefined shl in clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170128 91177308-0d34-0410-b5e6-96231b3b80d8
This change attempts to simplify (X^Y) -> X or Y in the user's context if we know that
only bits from X or Y are demanded.
A minimized case is provided bellow. This change will simplify "t>>16" into "var1 >>16".
=============================================================
unsigned foo (unsigned val1, unsigned val2) {
unsigned t = val1 ^ 1234;
return (t >> 16) | t; // NOTE: t is used more than once.
}
=============================================================
Note that if the "t" were used only once, the expression would be finally optimized as well.
However, with with this change, the optimization will take place earlier.
Reviewed by Nadav, Thanks a lot!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169317 91177308-0d34-0410-b5e6-96231b3b80d8
The type of shirt-right (logical or arithemetic) should remain unchanged
when transforming "X << C1 >> C2" into "X << (C1-C2)"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169209 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the puts optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
All the simplifiers from simplify-libcalls have now been migrated to
instcombine. Yay! Just a few other bits to migrate (prototype attribute
inference and a few statistics) and simplify-libcalls can finally be put
to rest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168925 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the fputs optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168893 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the fwrite optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168892 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the fprintf optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168891 91177308-0d34-0410-b5e6-96231b3b80d8
My commit to migrate the printf simplifiers from the simplify-libcalls
in r168604 introduced a regression reported by Duncan [1]. The problem
is that in some cases the library call simplifier can return a new value
that has no uses and the new value's type is different than the old value's
type (which is fine because there are no uses). The specific case that
triggered the bug looked something like:
declare void @printf(i8*, ...)
...
call void (i8*, ...)* @printf(i8* %fmt)
Which we want to optimized into:
call i32 @putchar(i32 104)
However, the code was attempting to replace all uses of the printf with
the putchar and the types differ, hence a crash. This is fixed by *just*
deleting the original instruction when there are no uses. The old
simplify-libcalls pass is already doing something similar.
[1] http://lists.cs.uiuc.edu/pipermail/llvmdev/2012-November/056338.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168716 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the sprintf optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168677 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombineLoadStoreAlloca.cpp, which had many issues.
(At least two bugs were noted on llvm-commits, and it was overly conservative.)
Instead, use getOrEnforceKnownAlignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168629 91177308-0d34-0410-b5e6-96231b3b80d8
Enhancement to InstCombine. Try to catch this opportunity:
---------------------------------------------------------------
((X^C1) >> C2) ^ C3 => (X>>C2) ^ ((C1>>C2)^C3)
where the subexpression "X ^ C1" has more than one uses, and
"(X^C1) >> C2" has single use.
----------------------------------------------------------------
Reviewed by Nadav (with minor change per his request).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168615 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the printf optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168604 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the toascii optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168580 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the isascii optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168579 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the isdigit optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168578 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the *abs optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168574 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the ffs* optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168571 91177308-0d34-0410-b5e6-96231b3b80d8
I discovered a few more missing functions while migrating optimizations
from the simplify-libcalls pass to the instcombine (I already added some
in r167659).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168501 91177308-0d34-0410-b5e6-96231b3b80d8
"not grep '-715827882'" performed as below...bad...
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168430 91177308-0d34-0410-b5e6-96231b3b80d8
replaced by this patch is equivalent to the new logic, but you'd be wrong, and
that's exactly where the bug was. There's a similar bug in instsimplify which
manifests itself as instsimplify failing to simplify this, rather than doing it
wrong, see next commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168181 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the math library call simplifications from the
simplify-libcalls pass into the instcombine library call simplifier.
I have typically migrated just one simplifier at a time, but the math
simplifiers are interdependent because:
1. CosOpt, PowOpt, and Exp2Opt all depend on UnaryDoubleFPOpt.
2. CosOpt, PowOpt, Exp2Opt, and UnaryDoubleFPOpt all depend on
the option -enable-double-float-shrink.
These two factors made migrating each of these simplifiers individually
more of a pain than it would be worth. So, I migrated them all together.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167815 91177308-0d34-0410-b5e6-96231b3b80d8
The library call simplifier folds memcmp calls with all constant arguments
to a constant. For example:
memcmp("foo", "foo", 3) -> 0
memcmp("hel", "foo", 3) -> 1
memcmp("foo", "hel", 3) -> -1
The folding is implemented in terms of the system memcmp that LLVM gets
linked with. It currently just blindly uses the value returned from
the system memcmp as the folded constant.
This patch normalizes the values returned from the system memcmp to
(-1, 0, 1) so that we get consistent results across multiple platforms.
The test cases were adjusted accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167726 91177308-0d34-0410-b5e6-96231b3b80d8
Transforms/InstCombine/memcmp-1.ll has a test case that looks like:
@foo = constant [4 x i8] c"foo\00"
@hel = constant [4 x i8] c"hel\00"
...
%mem1 = getelementptr [4 x i8]* @hel, i32 0, i32 0
%mem2 = getelementptr [4 x i8]* @foo, i32 0, i32 0
%ret = call i32 @memcmp(i8* %mem1, i8* %mem2, i32 3)
ret i32 %ret
; CHECK: ret i32 2
The folded return value (2 above) is computed using the system memcmp
that the compiler is linked with. This can return different values on
different systems. The test was originally written on an OS X 10.7.5
x86-64 box and passed. However, it failed on one of the x86-64 FreeBSD
buildbots because the system memcpy on that machine returned a different
value (1 instead of 2).
I fixed the test by checking the folding constants with regexes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167691 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the memset optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167689 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the memmove optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167687 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the memcpy optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167686 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the memcmp optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167683 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strstr optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167682 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strcspn optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167675 91177308-0d34-0410-b5e6-96231b3b80d8
Several of the simplifiers migrated from the simplify-libcalls pass to
the instcombine pass were not correctly checking the target library
information to gate the simplifications. This patch ensures that the
check is made.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167660 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strspn optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167568 91177308-0d34-0410-b5e6-96231b3b80d8
getIntPtrType support for multiple address spaces via a pointer type,
and also introduced a crasher bug in the constant folder reported in
PR14233.
These commits also contained several problems that should really be
addressed before they are re-committed. I have avoided reverting various
cleanups to the DataLayout APIs that are reasonable to have moving
forward in order to reduce the amount of churn, and minimize the number
of commits that were reverted. I've also manually updated merge
conflicts and manually arranged for the getIntPtrType function to stay
in DataLayout and to be defined in a plausible way after this revert.
Thanks to Duncan for working through this exact strategy with me, and
Nick Lewycky for tracking down the really annoying crasher this
triggered. (Test case to follow in its own commit.)
After discussing with Duncan extensively, and based on a note from
Micah, I'm going to continue to back out some more of the more
problematic patches in this series in order to ensure we go into the
LLVM 3.2 branch with a reasonable story here. I'll send a note to
llvmdev explaining what's going on and why.
Summary of reverted revisions:
r166634: Fix a compiler warning with an unused variable.
r166607: Add some cleanup to the DataLayout changes requested by
Chandler.
r166596: Revert "Back out r166591, not sure why this made it through
since I cancelled the command. Bleh, sorry about this!
r166591: Delete a directory that wasn't supposed to be checked in yet.
r166578: Add in support for getIntPtrType to get the pointer type based
on the address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167221 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strto* optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167119 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strpbrk optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167105 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strlen optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167103 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strncpy optimizations from the simplify-libcalls
pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167102 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the stpcpy optimizations from the simplify-libcalls
pass into the instcombine library call simplifier. Note that the
__stpcpy_chk simplifications were migrated in a previous commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167083 91177308-0d34-0410-b5e6-96231b3b80d8
r166198 migrated the strcpy optimization to instcombine. The strcpy
simplifier that was migrated from Transforms/Scalar/SimplifyLibCalls.cpp
was also doing some __strcpy_chk simplifications. Those fortified
simplifications were migrated as well, but introduced a bug in the
__stpcpy_chk simplifier in the process. This happened because the
__strcpy_chk and __stpcpy_chk simplifiers were both mapped to StrCpyChkOpt
which was updated with simplifications that worked for __strcpy_chk, but
not __stpcpy_chk.
This patch fixes the problem by adding proper test coverage and creating a
new simplifier for __stpcpy_chk (instead of sharing one with __strcpy_chk).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167082 91177308-0d34-0410-b5e6-96231b3b80d8
%V = mul i64 %N, 4
%t = getelementptr i8* bitcast (i32* %arr to i8*), i32 %V
into
%t1 = getelementptr i32* %arr, i32 %N
%t = bitcast i32* %t1 to i8*
incorporating the multiplication into the getelementptr.
This happens all the time in dragonegg, for example for
int foo(int *A, int N) {
return A[N];
}
because gcc turns this into byte pointer arithmetic before it hits the plugin:
D.1590_2 = (long unsigned int) N_1(D);
D.1591_3 = D.1590_2 * 4;
D.1592_5 = A_4(D) + D.1591_3;
D.1589_6 = *D.1592_5;
return D.1589_6;
The D.1592_5 line is a POINTER_PLUS_EXPR, which is turned into a getelementptr
on a bitcast of A_4 to i8*, so this becomes exactly the kind of IR that the
transform fires on.
An analogous transform (with no testcases!) already existed for bitcasts of
arrays, so I rewrote it to share code with this one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166474 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strcpy optimizations from the simplify-libcalls pass
into the instcombine library call simplifier. Note also that StrCpyChkOpt
has been updated with a few simplifications that were being done in the
simplify-libcalls version of StrCpyOpt, but not in the migrated implementation
of StrCpyOpt. There is no reason to overload StrCpyOpt with fortified and
regular simplifications in the new model since there is already a dedicated
simplifier for __strcpy_chk.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166198 91177308-0d34-0410-b5e6-96231b3b80d8
An obfuscated splat is where the frontend poorly generates code for a splat
using several different shuffles to create the splat, i.e.,
%A = load <4 x float>* %in_ptr, align 16
%B = shufflevector <4 x float> %A, <4 x float> undef, <4 x i32> <i32 0, i32 0, i32 undef, i32 undef>
%C = shufflevector <4 x float> %B, <4 x float> %A, <4 x i32> <i32 0, i32 1, i32 4, i32 undef>
%D = shufflevector <4 x float> %C, <4 x float> %A, <4 x i32> <i32 0, i32 1, i32 2, i32 4>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166061 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strcmp and strncmp optimizations from the
simplify-libcalls pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165915 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strchr and strrchr optimizations from the
simplify-libcalls pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165875 91177308-0d34-0410-b5e6-96231b3b80d8
