Hopefully this will end the GEPs saga!
This commit reverts r245394, i.e., it reapplies r221876 while incorporating the
fixes from D11847.
r221876 was not reapplied alone because it was not safe and D11847 was not
applied alone because it needs r221876 to produce correct results.
This should fix PR24596.
Original commit message for r221876:
Let's try this again...
This reverts r219432, plus a bug fix.
Description of the bug in r219432 (by Nick):
The bug was using AllPositive to break out of the loop; if the loop break
condition i != e is changed to i != e && AllPositive then the
test_modulo_analysis_with_global test I've added will fail as the Modulo will
be calculated incorrectly (as the last loop iteration is skipped, so Modulo
isn't updated with its Scale).
Nick also adds this comment:
ComputeSignBit is safe to use in loops as it takes into account phi nodes, and
the == EK_ZeroEx check is safe in loops as, no matter how the variable changes
between iterations, zero-extensions will always guarantee a zero sign bit. The
isValueEqualInPotentialCycles check is therefore definitely not needed as all
the variable analysis holds no matter how the variables change between loop
iterations.
And this patch also adds another enhancement to GetLinearExpression - basically
to convert ConstantInts to Offsets (see test_const_eval and
test_const_eval_scaled for the situations this improves).
Original commit message:
This reverts r218944, which reverted r218714, plus a bug fix.
Description of the bug in r218714 (by Nick):
The original patch forgot to check if the Scale in VariableGEPIndex flipped the
sign of the variable. The BasicAA pass iterates over the instructions in the
order they appear in the function, and so BasicAliasAnalysis::aliasGEP is
called with the variable it first comes across as parameter GEP1. Adding a
%reorder label puts the definition of %a after %b so aliasGEP is called with %b
as the first parameter and %a as the second. aliasGEP later calculates that %a
== %b + 1 - %idxprom where %idxprom >= 0 (if %a was passed as the first
parameter it would calculate %b == %a - 1 + %idxprom where %idxprom >= 0) -
ignoring that %idxprom is scaled by -1 here lead the patch to incorrectly
conclude that %a > %b.
Revised patch by Nick White, thanks! Thanks to Lang to isolating the bug.
Slightly modified by me to add an early exit from the loop and avoid
unnecessary, but expensive, function calls.
Original commit message:
Two related things:
1. Fixes a bug when calculating the offset in GetLinearExpression. The code
previously used zext to extend the offset, so negative offsets were converted
to large positive ones.
2. Enhance aliasGEP to deduce that, if the difference between two GEP
allocations is positive and all the variables that govern the offset are also
positive (i.e. the offset is strictly after the higher base pointer), then
locations that fit in the gap between the two base pointers are NoAlias.
Patch by Nick White!
Message from D11847:
Un-revert of r241981 and fix for PR23626. The 'Or' case of GetLinearExpression
delegates to 'Add' if possible, and if not it returns an Opaque value.
Unfortunately the Scale and Offsets weren't being set (and so defaulted to 0) -
and a scale of zero effectively removes the variable from the GEP instruction.
This meant that BasicAA would return MustAliases when it should have been
returning PartialAliases (and PR23626 was an example of the GVN pass using an
incorrect MustAlias to merge loads from what should have been different
pointers).
Differential Revision: http://reviews.llvm.org/D11847
Patch by Nick White <n.j.white@gmail.com>!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246502 91177308-0d34-0410-b5e6-96231b3b80d8
This would have suppressed bug 24578, about use-after-
destroy on User and MDNode. Rolled back suppression for
the sake of code cleanliness, in preferance for bug
tracking to keep track of this issue.
This reverts commit 6ff2baabc4625d5b0a8dccf76aa0f72d930ea6c0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246484 91177308-0d34-0410-b5e6-96231b3b80d8
Also delete and simplify a lot of MachineModuleInfo code that used to be
needed to handle personalities on landingpads. Now that the personality
is on the LLVM Function, we no longer need to track it this way on MMI.
Certainly it should not live on LandingPadInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246478 91177308-0d34-0410-b5e6-96231b3b80d8
Based on comments from Hal
(http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20150810/292978.html),
I've changed the interface to add a callback mechanism to the
TargetFrameLowering class to query whether the specific target
supports shrink wrapping. By default, shrink wrapping is disabled by
default. Each target can override the default behaviour using the
TargetFrameLowering::targetSupportsShrinkWrapping() method. Shrink
wrapping can still be explicitly enabled or disabled from the command
line, using the existing -enable-shrink-wrap=<true|false> option.
Phabricator: http://reviews.llvm.org/D12293
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246463 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid marking some MCSymbols as used in MC/AsmParser.cpp when no uses
exist. This fixes a bug in parseAssignmentExpression() which
inadvertently sets IsUsed, thereby triggering:
"invalid re-assignment of non-absolute variable"
on otherwise valid code. No other functionality change intended.
The original version of this patch touched many calls to MCSymbol
accessors. On rafael's advice, I have stripped this patch down a bit.
As a follow-up, I intend to find the call sites which intentionally set
IsUsed and force them to do so explicitly.
Differential Revision: http://reviews.llvm.org/D12347
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246457 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
JumpThreading shouldn't duplicate a convergent call, because that would move a convergent call into a control-inequivalent location. For example,
if (cond) {
...
} else {
...
}
convergent_call();
if (cond) {
...
} else {
...
}
should not be optimized to
if (cond) {
...
convergent_call();
...
} else {
...
convergent_call();
...
}
Test Plan: test/Transforms/JumpThreading/basic.ll
Patch by Xuetian Weng.
Reviewers: resistor, arsenm, jingyue
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12484
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246415 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, the header now provides llvm::thread, which is either a
typedef of std::thread or a replacement that calls the function synchronously
depending on the value of LLVM_ENABLE_THREADS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246402 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r246379. It seems that the commit was not the culprit,
and the bot will be investigated for instability.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246380 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r246371, as it cause a rather obscure bug in AArch64
test-suite paq8p (time outs, seg-faults). I'll investigate it before
reapplying.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246379 91177308-0d34-0410-b5e6-96231b3b80d8
of its strings when expanding the string literals from the macros, and
push all of the APIs to be StringRef instead of C-string APIs.
This (remarkably) removes a very non-trivial number of strlen calls. It
even deletes code and complexity from one of the primary users -- Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246374 91177308-0d34-0410-b5e6-96231b3b80d8
Value *getSplatValue(Value *Val);
It complements the CreateVectorSplat(), which creates 2 instructions - insertelement and shuffle with all-zero mask.
The new function recognizes the pattern - insertelement+shuffle and returns the splat value (or nullptr).
It also returns a splat value form ConstantDataVector, for completeness.
Differential Revision: http://reviews.llvm.org/D11124
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246371 91177308-0d34-0410-b5e6-96231b3b80d8
the necessary tables.
This will allow me to restructure the code and structures using this to
be significantly more efficient. It also removes the duplication of the
list of several enumerators. It also enshrines that the order of
enumerators match the order of the entries in the tables, something the
implementation code actually uses.
No functionality changed (yet).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246370 91177308-0d34-0410-b5e6-96231b3b80d8
parsing logic prior to making substantial changes to it.
This parsing logic is incredibly wasteful, so I'm planning to rewrite
it. Just unittesting the triple parsing logic spends well over 80% of
its time in the ARM parsing logic, and others have measured significant
time spent here in real production compiles.
Stay tuned...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246369 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes PR24621 and matches what we do for `DILocation`. Although
the limit seems somewhat artificial, there are places in the backend
that also assume 16-bit columns, so we may as well just be consistent
about the limits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246349 91177308-0d34-0410-b5e6-96231b3b80d8
Add `Function::setSubprogram()` and `Function::getSubprogram()`,
convenience methods to forward to `setMetadata()` and `getMetadata()`,
respectively, and deal in `DISubprogram` instead of `MDNode`.
Also add a verifier check to enforce that `!dbg` attachments are always
subprograms.
Originally (when I had the llvm-dev discussion back in April) I thought
I'd store a pointer directly on `llvm::Function` for these attachments
-- we frequently have debug info, and that's much cheaper than using map
in the context if there are no other function-level attachments -- but
for now I'm just using the generic infrastructure. Let's add the extra
complexity only if this shows up in a profile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246339 91177308-0d34-0410-b5e6-96231b3b80d8
Currently the DWARF backend requires that subprograms have a type, and
the type is ignored if it has an empty type array. The long term
direction here -- see PR23079 -- is instead to skip the type entirely if
there's no valid type.
It turns out we have cases in tree of missing types on subprograms, but
since they're not referenced by compile units, the backend never crashes
on them. One option would be to add a Verifier check that subprograms
have types, and fix the bitrot. However, this is a fair bit of churn
(20-30 testcases) that would be reversed anyway by PR23079.
I found this inconsistency because of a WIP patch and upgrade script for
PR23367 that started crashing on test/DebugInfo/2010-10-01-crash.ll.
This commit updates the testcase to reference the subprogram from the
compile unit, and fixes the resulting crash (in line with the direction
of PR23079). This also updates `DIBuilder` to stop assuming a non-null
pointer for the subroutine types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246333 91177308-0d34-0410-b5e6-96231b3b80d8
This patch includes a fix for a llvm-readobj test. With this patch,
the tool does no longer print out COFF headers for the short import
file, but that's probably desirable because the header for the short
import file is dummy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246283 91177308-0d34-0410-b5e6-96231b3b80d8
For targets that didn't support this, this will let us respect the
langref instead of failing to select.
Note that we don't need to change the 32-bit x86/PPC lowerings (to
account for the result type/# difference) because they're both
custom and bypass type legalization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246258 91177308-0d34-0410-b5e6-96231b3b80d8
llvm::splitCodeGen is a function that implements the core of parallel LTO
code generation. It uses llvm::SplitModule to split the module into linkable
partitions and spawning one code generation thread per partition. The function
produces multiple object files which can be linked in the usual way.
This has been threaded through to LTOCodeGenerator (and llvm-lto for testing
purposes). Separate patches will add parallel LTO support to the gold plugin
and lld.
Differential Revision: http://reviews.llvm.org/D12260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246236 91177308-0d34-0410-b5e6-96231b3b80d8
We can now run 32-bit programs with empty catch bodies. The next step
is to change PEI so that we get funclet prologues and epilogues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246235 91177308-0d34-0410-b5e6-96231b3b80d8
This header is a wrapper for <thread> that works around problems with the
MSVC headers when exceptions are disabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246218 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike scalar operations, we can perform vector operations on element types that
are smaller than the native integer types. We type-promote scalar operations if
they are smaller than a native type (e.g., i8 arithmetic is promoted to i32
arithmetic on Arm targets). This patch detects and removes type-promotions
within the reduction detection framework, enabling the vectorization of small
size reductions.
In the legality phase, we look through the ANDs and extensions that InstCombine
creates during promotion, keeping track of the smaller type. In the
profitability phase, we use the smaller type and ignore the ANDs and extensions
in the cost model. Finally, in the code generation phase, we truncate the result
of the reduction to allow InstCombine to rewrite the entire expression in the
smaller type.
This fixes PR21369.
http://reviews.llvm.org/D12202
Patch by Matt Simpson <mssimpso@codeaurora.org>!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246149 91177308-0d34-0410-b5e6-96231b3b80d8
... and move it into LoopUtils where it can be used by other passes, just like ReductionDescriptor. The API is very similar to ReductionDescriptor - that is, not very nice at all. Sorting these both out will come in a followup.
NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246145 91177308-0d34-0410-b5e6-96231b3b80d8
We removed access to the DataLayout on the TargetMachine and
deprecated the C API function LLVMGetTargetMachineData() in r243114.
However the way I tried to be backward compatible was broken: I
changed the wrapper of the TargetMachine to be a structure that
includes the DataLayout as well. However the TargetMachine is also
wrapped by the ExecutionEngine, in the more classic way. A client
using the TargetMachine wrapped by the ExecutionEngine and trying
to get the DataLayout would break.
It seems tricky to solve the problem completely in the C API
implementation. This patch tries to address this backward
compatibility in a more lighter way in the C++ API. The C API is
restored in its original state and the removed C++ API is
reintroduced, but privately. The C API is friended to the
TargetMachine and should be the only consumer for this API.
Reviewers: ributzka
Differential Revision: http://reviews.llvm.org/D12263
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246082 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r246052.
Third attempt, still unpleasant for some bots.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246057 91177308-0d34-0410-b5e6-96231b3b80d8
We removed access to the DataLayout on the TargetMachine and
deprecated the C API function LLVMGetTargetMachineData() in r243114.
However the way I tried to be backward compatible was broken: I
changed the wrapper of the TargetMachine to be a structure that
includes the DataLayout as well. However the TargetMachine is also
wrapped by the ExecutionEngine, in the more classic way. A client
using the TargetMachine wrapped by the ExecutionEngine and trying
to get the DataLayout would break.
It seems tricky to solve the problem completely in the C API
implementation. This patch tries to address this backward
compatibility in a more lighter way in the C++ API. The C API is
restored in its original state and the removed C++ API is
reintroduced, but privately. The C API is friended to the
TargetMachine and should be the only consumer for this API.
Reviewers: ributzka
Differential Revision: http://reviews.llvm.org/D12263
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246052 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r246044.
Build broken, still. It builds for me...
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246049 91177308-0d34-0410-b5e6-96231b3b80d8
We removed access to the DataLayout on the TargetMachine and
deprecated the C API function LLVMGetTargetMachineData() in r243114.
However the way I tried to be backward compatible was broken: I
changed the wrapper of the TargetMachine to be a structure that
includes the DataLayout as well. However the TargetMachine is also
wrapped by the ExecutionEngine, in the more classic way. A client
using the TargetMachine wrapped by the ExecutionEngine and trying
to get the DataLayout would break.
It seems tricky to solve the problem completely in the C API
implementation. This patch tries to address this backward
compatibility in a more lighter way in the C++ API. The C API is
restored in its original state and the removed C++ API is
reintroduced, but privately. The C API is friended to the
TargetMachine and should be the only consumer for this API.
Reviewers: ributzka
Differential Revision: http://reviews.llvm.org/D12263
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246044 91177308-0d34-0410-b5e6-96231b3b80d8
This was only added to preserve the old ScalarRepl's use of SSAUpdater
which was originally to avoid use of dominance frontiers. Now, we only
need a domtree, and we'll need a domtree right after this pass as well
and so it makes perfect sense to always and only use the dom-tree
powered mem2reg. This was flag-flipper earlier and has stuck reasonably
so I wanted to gut the now-dead code out of SROA before we waste more
time with it. Among other things, this will make passmanager porting
easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246028 91177308-0d34-0410-b5e6-96231b3b80d8
Split a MCAssembler::layout() method out of MCAssembler::finish(). This allows
running the MCSections layout separately from the streaming of the output
file. This way if a client wants to use MC to generate section contents, but
emit something different than the standard relocatable object files it is
possible (llvm-dsymutil is such a client).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246008 91177308-0d34-0410-b5e6-96231b3b80d8
Hardcode less values in some mach-o header writing routines and pass them
as argument. Doing so will allow reusing this code in llvm-dsymutil.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@246007 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Adds accessor functions for all the fields in llvm::fltSemantics. This will be used in MergeFunctions to order two APFloats with different semanatics.
Author: jrkoenig
Reviewers: jfb
Subscribers: dschuff, llvm-commits
Differential revision: http://reviews.llvm.org/D12253
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245999 91177308-0d34-0410-b5e6-96231b3b80d8
This should be no functional change but for the record: For three cases
in X86FastISel this will change the order in which the FalseMBB and
TrueMBB of a conditional branch is addedd to the successor/predecessor
lists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245997 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change makes the variable argument intrinsics, `llvm.va_start` and
`llvm.va_copy`, and the `va_arg` instruction behave as they do on Windows
inside a `CallingConv::X86_64_Win64` function. It's needed for a Clang patch
I have to add support for GCC's `__builtin_ms_va_list` constructs.
Reviewers: nadav, asl, eugenis
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1622
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245990 91177308-0d34-0410-b5e6-96231b3b80d8
This is friendlier to the readers as it makes it clear that the API is
not meant for vregs but just for physregs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245977 91177308-0d34-0410-b5e6-96231b3b80d8
Eventually, we will need sample profiles to be incorporated into the
inliner's cost models. To do this, we need the sample profile pass to
be a module pass.
This patch makes no functional changes beyond the mechanical adjustments
needed to run SampleProfile as a module pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245940 91177308-0d34-0410-b5e6-96231b3b80d8
While introducing support for MinVersionLoadCommand in llvm-readobj I noticed there's
no API to extract Major/Minor/Update components conveniently. Currently consumers
do the bit twiddling on their own, but this will change from now on.
I'll convert llvm-objdump (and llvm-readobj) in a later commit.
Differential Revision: http://reviews.llvm.org/D12282
Reviewed by: rafael
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245938 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 433bfd94e4b7e3cc3f8b08f8513ce47817941b0c.
Broke some bot, have to see why it passed locally.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245917 91177308-0d34-0410-b5e6-96231b3b80d8
We removed access to the DataLayout on the TargetMachine and
deprecated the C API function LLVMGetTargetMachineData() in r243114.
However the way I tried to be backward compatible was broken: I
changed the wrapper of the TargetMachine to be a structure that
includes the DataLayout as well. However the TargetMachine is also
wrapped by the ExecutionEngine, in the more classic way. A client
using the TargetMachine wrapped by the ExecutionEngine and trying
to get the DataLayout would break.
It seems tricky to solve the problem completely in the C API
implementation. This patch tries to address this backward
compatibility in a more lighter way in the C++ API. The C API is
restored in its original state and the removed C++ API is
reintroduced, but privately. The C API is friended to the
TargetMachine and should be the only consumer for this API.
Reviewers: ributzka
Differential Revision: http://reviews.llvm.org/D12263
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245916 91177308-0d34-0410-b5e6-96231b3b80d8
This change moves LTOCodeGenerator's ownership of the merged module to a
field of type std::unique_ptr<Module>. This helps simplify parts of the code
and clears the way for the module to be consumed by LLVM CodeGen (see D12132
review comments).
Differential Revision: http://reviews.llvm.org/D12205
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245891 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
WinEHPrepare is going to require that cleanuppad and catchpad produce values
of token type which are consumed by any cleanupret or catchret exiting the
pad. This change updates the signatures of those operators to require/enforce
that the type produced by the pads is token type and that the rets have an
appropriate argument.
The catchpad argument of a `CatchReturnInst` must be a `CatchPadInst` (and
similarly for `CleanupReturnInst`/`CleanupPadInst`). To accommodate that
restriction, this change adds a notion of an operator constraint to both
LLParser and BitcodeReader, allowing appropriate sentinels to be constructed
for forward references and appropriate error messages to be emitted for
illegal inputs.
Also add a verifier rule (noted in LangRef) that a catchpad with a catchpad
predecessor must have no other predecessors; this ensures that WinEHPrepare
will see the expected linear relationship between sibling catches on the
same try.
Lastly, remove some superfluous/vestigial casts from instruction operand
setters operating on BasicBlocks.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12108
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245797 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to remove a bunch of code in LTOCodeGenerator and llvm-lto
and has the side effect of improving error handling in the libLTO C API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245756 91177308-0d34-0410-b5e6-96231b3b80d8
This commit extends the 'SlotMapping' structure and includes mappings for named
and numbered types in it. The LLParser is extended accordingly to fill out
those mappings at the end of module parsing.
This information is useful when we want to parse standalone constant values
at a later stage using the 'parseConstantValue' method. The constant values
can be constant expressions, which can contain references to types. In order
to parse such constant values, we have to restore the internal named and
numbered mappings for the types in LLParser, otherwise the parser will report
a parsing error. Therefore, this commit also introduces a new method called
'restoreParsingState' to LLParser, which uses the slot mappings to restore
some of its internal parsing state.
This commit is required to serialize constant value pointers in the machine
memory operands for the MIR format.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245740 91177308-0d34-0410-b5e6-96231b3b80d8
Gets a bit tricky in the ValueMapper, of course - not sure if we should
just expose a list of explicit types for each Value so that the
ValueMapper can be neutral to these special cases (it's OK for things
like load, where the explicit type is the result type - but when that's
not the case, it means plumbing through another "special" type... )
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245728 91177308-0d34-0410-b5e6-96231b3b80d8
such as std::equal on the third argument. This reverts previous workarounds.
Predefining _DEBUG_POINTER_IMPL disables Visual C++ 2013 headers from defining
it to a function performing the null pointer check. In practice, it's not that
bad since any function actually using the nullptr will seg fault. The other
iterator sanity checks remain enabled in the headers.
Reviewed by Aaron Ballmanþ and Duncan P. N. Exon Smith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245711 91177308-0d34-0410-b5e6-96231b3b80d8
The module splitter splits a module into linkable partitions. It will
be used to implement parallel LTO code generation.
This initial version of the splitter does not attempt to deal with the
somewhat subtle symbol visibility issues around module splitting. These
will be dealt with in a future change.
Differential Revision: http://reviews.llvm.org/D12132
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245662 91177308-0d34-0410-b5e6-96231b3b80d8
and make it always preserve debug locations, since all callers wanted this
behavior anyway.
This is addressing a post-commit review feedback for r245589.
NFC (inside the LLVM tree).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245622 91177308-0d34-0410-b5e6-96231b3b80d8
Since r245605, the clang headers don't use these anymore.
r245165 updated some of the tests already; update the others, add
an autoupgrade, remove the intrinsics, and cleanup the definitions.
Differential Revision: http://reviews.llvm.org/D10555
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245606 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Refactor, NFC
Extracts computeOverflowForSignedAdd and isKnownNonNegative from NaryReassociate to ValueTracking in case
others need it.
Reviewers: reames
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D11313
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245591 91177308-0d34-0410-b5e6-96231b3b80d8
Since Ashutosh made findDefsUsedOutsideOfLoop public, we can clean this
up.
Now clients that don't compute DefsUsedOutsideOfLoop can just call
versionLoop() and computing DefsUsedOutsideOfLoop will happen
implicitly. With that there is no reason to expose addPHINodes anymore.
Ashutosh, you can now drop the calls to findDefsUsedOutsideOfLoop and
addPHINodes in LVerLICM and things should just work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245579 91177308-0d34-0410-b5e6-96231b3b80d8
analyses into LLVM's Analysis library rather than having them in
a Transforms library.
This is motivated by the need to have the core AliasAnalysis
infrastructure be aware of the ObjCARCAliasAnalysis. However, it also
seems like a nice and clean separation. Everything was very easy to move
and this doesn't create much clutter in the analysis library IMO.
Differential Revision: http://reviews.llvm.org/D12133
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245541 91177308-0d34-0410-b5e6-96231b3b80d8
This is something like nullopt in std::experimental::optional. Optional
could already be constructed from None, so this seems like an obvious
extension from there.
I have a use in a future patch for Clang, though it may not go that
way/end up used - so this seemed worth committing now regardless.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245518 91177308-0d34-0410-b5e6-96231b3b80d8
We still need to add constant folding of vector comparisons to fold the tests for targets that don't support the respective min/max nodes
I needed to update 2011-12-06-AVXVectorExtractCombine to load a vector instead of using a constant vector to prevent it folding
Differential Revision: http://reviews.llvm.org/D12118
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245503 91177308-0d34-0410-b5e6-96231b3b80d8
Reintroduce r245442. Remove an overly conservative assertion introduced
in r245442. We could replace the assertion to use `shareSameRegisterFile`
instead, but in that point in `insertPHI` we already lost the original
Def subreg to check against. So drop the assertion completely.
Original commit message:
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245479 91177308-0d34-0410-b5e6-96231b3b80d8
Reapply r243486.
- Teaches the ValueTracker in the PeepholeOptimizer to look through PHI
instructions.
- Add findNextSourceAndRewritePHI method to lookup into multiple sources
returnted by the ValueTracker and rewrite PHIs with new sources.
With these changes we can find more register sources and rewrite more
copies to allow coaslescing of bitcast instructions. Hence, we eliminate
unnecessary VR64 <-> GR64 copies in x86, but it could be extended to
other archs by marking "isBitcast" on target specific instructions. The
x86 example follows:
A:
psllq %mm1, %mm0
movd %mm0, %r9
jmp C
B:
por %mm1, %mm0
movd %mm0, %r9
jmp C
C:
movd %r9, %mm0
pshufw $238, %mm0, %mm0
Becomes:
A:
psllq %mm1, %mm0
jmp C
B:
por %mm1, %mm0
jmp C
C:
pshufw $238, %mm0, %mm0
Differential Revision: http://reviews.llvm.org/D11197
rdar://problem/20404526
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245442 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the isPow2SDivCheap() query, as it is not currently used in
any meaningful way. isIntDivCheap() no longer relies on a state variable
(as all in-tree target set it to false), but the interface allows querying
based on the type optimization level.
NFC.
Differential Revision: http://reviews.llvm.org/D12082
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245430 91177308-0d34-0410-b5e6-96231b3b80d8
Exposed findDefsUsedOutsideOfLoop as a loop utility function by moving
it from LoopDistribute to LoopUtils.
Reviewed By: anemet
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245416 91177308-0d34-0410-b5e6-96231b3b80d8
without *requiring* it.
This allows a pass indicate that it will use an analysis if available
(through getAnalysisIfAvailable). When the pass manager knows this, it
will refrain from deleting that analysis if it can. Naturally, it will
still get invalidated at the correct time. These passes are not
considered when scheduling the pass pipeline, so typically they will
require manual scheduling, but this may also allow passes with
getAnalysisIfAvailable to find the analysis more often if nothing after
them requires that analysis and it wasn't invalidated.
I don't have a particular use case with the current passes, but with my
new structure for alias analyses, this will be very useful. We want to
allow people to customize the set of AAs available by scheduling
additional passes. These's aren't ever *required* for obvious reasons.
So we need some way to mark in the legacy pass manager that they will
still be used if available.
This is essentially how analysis groups already work. But this makes the
feature generally available and more explicit. It should allow the AA
change to not impact how people trigger a custom alias analysis being
available at a certain point in compilation.
Differential Revision: http://reviews.llvm.org/D12114
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245409 91177308-0d34-0410-b5e6-96231b3b80d8
Fix how DependenceAnalysis calls delinearization, mirroring what is done in
Delinearization.cpp (mostly by making sure to call getSCEVAtScope before
delinearizing, and by removing the unnecessary 'Pairs == 1' check).
Patch by Vaivaswatha Nagaraj!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245408 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds support for bit mask target flag serialization to the MIR
printer and the MIR parser. It also adds support for the machine operand's
target flag serialization to the AArch64 target.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245383 91177308-0d34-0410-b5e6-96231b3b80d8
Remove support for Valgrind-based TSan, which hasn't been maintained for a
few years. We now use the TSan annotations only if LLVM is compiled with
-fsanitize=thread. We no longer need the weak function definitions as we
are guaranteed that our program is linked directly with the TSan runtime.
Differential Revision: http://reviews.llvm.org/D12121
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245374 91177308-0d34-0410-b5e6-96231b3b80d8
Note that this actually has no functional change -- we never call these
methods using the derived type. But it is still cleaner and fixes a GCC
warning.
Spotted by Dave in code review and the warning spotted by Joerg on IRC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245341 91177308-0d34-0410-b5e6-96231b3b80d8
State numbers are calculated by performing a walk from the innermost
funclet to the outermost funclet. Rudimentary support for the new EH
constructs has been added to the assembly printer, just enough to test
the new machinery.
Differential Revision: http://reviews.llvm.org/D12098
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245331 91177308-0d34-0410-b5e6-96231b3b80d8
folding the code into the main Analysis library.
There already wasn't much of a distinction between Analysis and IPA.
A number of the passes in Analysis are actually IPA passes, and there
doesn't seem to be any advantage to separating them.
Moreover, it makes it hard to have interactions between analyses that
are both local and interprocedural. In trying to make the Alias Analysis
infrastructure work with the new pass manager, it becomes particularly
awkward to navigate this split.
I've tried to find all the places where we referenced this, but I may
have missed some. I have also adjusted the C API to continue to be
equivalently functional after this change.
Differential Revision: http://reviews.llvm.org/D12075
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245318 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a new function TargetFrameLowering::alignSPAdjust
and calls it from TargetInstrInfo::getSPAdjust. It fixes PR24142.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245253 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a virtual `peekTokens()` function to `MCAsmLexer`
which can peek forward an arbitrary number of tokens.
It also makes the `peekTok()` method call `peekTokens()` method, but
only requesting one token.
The idea is to better support targets which more more ambiguous
assembly syntaxes.
Patch by Dylan McKay!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245221 91177308-0d34-0410-b5e6-96231b3b80d8
This change makes ScalarEvolution a stand-alone object and just produces
one from a pass as needed. Making this work well requires making the
object movable, using references instead of overwritten pointers in
a number of places, and other refactorings.
I've also wired it up to the new pass manager and added a RUN line to
a test to exercise it under the new pass manager. This includes basic
printing support much like with other analyses.
But there is a big and somewhat scary change here. Prior to this patch
ScalarEvolution was never *actually* invalidated!!! Re-running the pass
just re-wired up the various other analyses and didn't remove any of the
existing entries in the SCEV caches or clear out anything at all. This
might seem OK as everything in SCEV that can uses ValueHandles to track
updates to the values that serve as SCEV keys. However, this still means
that as we ran SCEV over each function in the module, we kept
accumulating more and more SCEVs into the cache. At the end, we would
have a SCEV cache with every value that we ever needed a SCEV for in the
entire module!!! Yowzers. The releaseMemory routine would dump all of
this, but that isn't realy called during normal runs of the pipeline as
far as I can see.
To make matters worse, there *is* actually a key that we don't update
with value handles -- there is a map keyed off of Loop*s. Because
LoopInfo *does* release its memory from run to run, it is entirely
possible to run SCEV over one function, then over another function, and
then lookup a Loop* from the second function but find an entry inserted
for the first function! Ouch.
To make matters still worse, there are plenty of updates that *don't*
trip a value handle. It seems incredibly unlikely that today GVN or
another pass that invalidates SCEV can update values in *just* such
a way that a subsequent run of SCEV will incorrectly find lookups in
a cache, but it is theoretically possible and would be a nightmare to
debug.
With this refactoring, I've fixed all this by actually destroying and
recreating the ScalarEvolution object from run to run. Technically, this
could increase the amount of malloc traffic we see, but then again it is
also technically correct. ;] I don't actually think we're suffering from
tons of malloc traffic from SCEV because if we were, the fact that we
never clear the memory would seem more likely to have come up as an
actual problem before now. So, I've made the simple fix here. If in fact
there are serious issues with too much allocation and deallocation,
I can work on a clever fix that preserves the allocations (while
clearing the data) between each run, but I'd prefer to do that kind of
optimization with a test case / benchmark that shows why we need such
cleverness (and that can test that we actually make it faster). It's
possible that this will make some things faster by making the SCEV
caches have higher locality (due to being significantly smaller) so
until there is a clear benchmark, I think the simple change is best.
Differential Revision: http://reviews.llvm.org/D12063
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245193 91177308-0d34-0410-b5e6-96231b3b80d8
This is a very minimal move support - it leaves the moved-from object in
a zombie state that is only valid for destruction and move assignment.
This seems fine to me, and leaving it in the default constructed state
would require adding more state to the object and potentially allocating
memory (!!!) and so seems like a Bad Idea.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245192 91177308-0d34-0410-b5e6-96231b3b80d8
analysis ...
It turns out that we *do* need the old CallGraph ported to the new pass
manager. There are times where this model of a call graph is really
superior to the one provided by the LazyCallGraph. For example,
GlobalsModRef very specifically needs the model provided by CallGraph.
While here, I've tried to make the move semantics actually work. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245170 91177308-0d34-0410-b5e6-96231b3b80d8
infrastructure.
This AA was never used in tree. It's infrastructure also completely
overlaps that of TargetLibraryInfo which is used heavily by BasicAA to
achieve similar goals to those stated for this analysis.
As has come up in several discussions, the use case here is still really
important, but this code isn't helping move toward that use case. Any
progress on better supporting rich AA information for runtime library
environments would likely be better off starting from scratch or
starting from TargetLibraryInfo than from this base.
Differential Revision: http://reviews.llvm.org/D12028
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245155 91177308-0d34-0410-b5e6-96231b3b80d8
Some personality routines require funclet exit points to be clearly
marked, this is done by producing a token at the funclet pad and
consuming it at the corresponding ret instruction. CleanupReturnInst
already had a spot for this operand but CatchReturnInst did not.
Other personality routines don't need to use this which is why it has
been made optional.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245149 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
http://reviews.llvm.org/D11212 made Scalar Evolution able to propagate NSW and NUW flags from instructions to SCEVs for add instructions. This patch expands that to sub, mul and shl instructions.
This change makes LSR able to generate pointer induction variables for loops like these, where the index is 32 bit and the pointer is 64 bit:
for (int i = 0; i < numIterations; ++i)
sum += ptr[i - offset];
for (int i = 0; i < numIterations; ++i)
sum += ptr[i * stride];
for (int i = 0; i < numIterations; ++i)
sum += ptr[3 * (i << 7)];
Reviewers: atrick, sanjoy
Subscribers: sanjoy, majnemer, hfinkel, llvm-commits, meheff, jingyue, eliben
Differential Revision: http://reviews.llvm.org/D11860
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245118 91177308-0d34-0410-b5e6-96231b3b80d8
Although targeting CoreCLR is similar to targeting MSVC, there are
certain important differences that the backend must be aware of
(e.g. differences in stack probes, EH, and library calls).
Differential Revision: http://reviews.llvm.org/D11012
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245115 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It always makes NewBB the entry of the region instead of OldBB. This breaks if there are edges from inside the region to OldBB. OldBB is moved out of the region and hence there are exiting edges to OldBB and the region's exit block, contradicting the single-exit condition for regions.
The only use from Polly is going to be removed, hence I propose to remove the function completely.
Reviewers: grosser
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11873
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245092 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes the Darwin ARM backend take advantage of TargetParser. It
also teaches TargetParser about ARMV7K for the first time. This makes target
triple parsing more consistent across llvm.
Differential Revision: http://reviews.llvm.org/D11996
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245081 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r245047.
It was failing on the darwin bots. The problem was that when running
./bin/llc -march=msp430
llc gets to
if (TheTriple.getTriple().empty())
TheTriple.setTriple(sys::getDefaultTargetTriple());
Which means that we go with an arch of msp430 but a triple of
x86_64-apple-darwin14.4.0 which fails badly.
That code has to be updated to select a triple based on the value of
march, but that is not a trivial fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245062 91177308-0d34-0410-b5e6-96231b3b80d8
Other than some places that were handling unknown as ELF, this should
have no change. The test updates are because we were detecting
arm-coff or x86_64-win64-coff as ELF targets before.
It is not clear if the enum should live on the Triple. At least now it lives
in a single location and should be easier to move somewhere else.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245047 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces the basic functionality to support "token types".
The motivation stems from the need to perform operations on a Value
whose provenance cannot be obscured.
There are several applications for such a type but my immediate
motivation stems from WinEH. Our personality routine enforces a
single-entry - single-exit regime for cleanups. After several rounds of
optimizations, we may be left with a terminator whose "cleanup-entry
block" is not entirely clear because control flow has merged two
cleanups together. We have experimented with using labels as operands
inside of instructions which are not terminators to indicate where we
came from but found that LLVM does not expect such exotic uses of
BasicBlocks.
Instead, we can use this new type to clearly associate the "entry point"
and "exit point" of our cleanup. This is done by having the cleanuppad
yield a Token and consuming it at the cleanupret.
The token type makes it impossible to obscure or otherwise hide the
Value, making it trivial to track the relationship between the two
points.
What is the burden to the optimizer? Well, it turns out we have already
paid down this cost by accepting that there are certain calls that we
are not permitted to duplicate, optimizations have to watch out for
such instructions anyway. There are additional places in the optimizer
that we will probably have to update but early examination has given me
the impression that this will not be heroic.
Differential Revision: http://reviews.llvm.org/D11861
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245029 91177308-0d34-0410-b5e6-96231b3b80d8
its creation function.
This required shifting a bunch of method definitions to be out-of-line
so that we could leave most of the implementation guts in the .cpp file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245021 91177308-0d34-0410-b5e6-96231b3b80d8
creation function there.
Same basic refactoring as the other alias analyses. Nothing special
required this time around.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245012 91177308-0d34-0410-b5e6-96231b3b80d8
I've used forward declarations and reorderd the source code some to make
this reasonably clean and keep as much of the code as possible in the
source file, including all the stratified set details. Just the basic AA
interface and the create function are in the header file, and the header
file is now included into the relevant locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245009 91177308-0d34-0410-b5e6-96231b3b80d8
the AA counter pass.
For pointsToConstantMemory, I think this is a "bug fix" as I think the
code as written will actually infloop if ever reached. For the
getModRefInfo, this is a no-op change but with a significantly simpler
form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245007 91177308-0d34-0410-b5e6-96231b3b80d8
.cpp file to make the header much less noisy.
Also makes it easy to use a static helper rather than a public method
for printing lines of stats.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245006 91177308-0d34-0410-b5e6-96231b3b80d8
pattern.
Also hoist the creation routine out of the generic header and into the
pass header now that we have one.
I've worked to not make any changes, even formatting ones here. I'll
clean up the formatting and other things in a follow-up patch now that
the code is in the right place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245004 91177308-0d34-0410-b5e6-96231b3b80d8
This commit modifies the way the machine basic blocks are serialized - now the
machine basic blocks are serialized using a custom syntax instead of relying on
YAML primitives. Instead of using YAML mappings to represent the individual
machine basic blocks in a machine function's body, the new syntax uses a single
YAML block scalar which contains all of the machine basic blocks and
instructions for that function.
This is an example of a function's body that uses the old syntax:
body:
- id: 0
name: entry
instructions:
- '%eax = MOV32r0 implicit-def %eflags'
- 'RETQ %eax'
...
The same body is now written like this:
body: |
bb.0.entry:
%eax = MOV32r0 implicit-def %eflags
RETQ %eax
...
This syntax change is motivated by the fact that the bundled machine
instructions didn't map that well to the old syntax which was using a single
YAML sequence to store all of the machine instructions in a block. The bundled
machine instructions internally use flags like BundledPred and BundledSucc to
determine the bundles, and serializing them as MI flags using the old syntax
would have had a negative impact on the readability and the ease of editing
for MIR files. The new syntax allows me to serialize the bundled machine
instructions using a block construct without relying on the internal flags,
for example:
BUNDLE implicit-def dead %itstate, implicit-def %s1 ... {
t2IT 1, 24, implicit-def %itstate
%s1 = VMOVS killed %s0, 1, killed %cpsr, implicit killed %itstate
}
This commit also converts the MIR testcases to the new syntax. I developed
a script that can convert from the old syntax to the new one. I will post the
script on the llvm-commits mailing list in the thread for this commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244982 91177308-0d34-0410-b5e6-96231b3b80d8
After r244870 flush() will only compare two null pointers and return,
doing nothing but wasting run time. The call is not required any more
as the stream and its SmallString are always in sync.
Thanks to David Blaikie for reviewing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244928 91177308-0d34-0410-b5e6-96231b3b80d8
This is faster and avoids the stream and SmallString state synchronization issue.
resync() is a no-op and may be safely deleted. I'll do so in a follow-up commit.
Reviewed by Rafael Espindola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244870 91177308-0d34-0410-b5e6-96231b3b80d8
This causes the other special members (like move and copy construction,
and move assignment) to come through for free. Some code in clang was
depending on the (deprecated, in the original code) copy ctor. Now that
there's no user-defined special members, they're all available without
any deprecation concerns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244835 91177308-0d34-0410-b5e6-96231b3b80d8
This debugger was designed to catch places where the old update API was
failing to be used correctly. As I've removed the update API, it no
longer serves any purpose. We can introduce new debugging aid passes
around any future work w.r.t. updating AAs.
Note that I've updated the documentation here, but really I need to
rewrite the documentation to carefully spell out the ideas around
stateful AA and how things are changing in the AA world. However, I'm
hoping to do that as a follow-up to the refactoring of the AA
infrastructure to work in both old and new pass managers so that I can
write the documentation specific to that world.
Differential Revision: http://reviews.llvm.org/D11984
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244825 91177308-0d34-0410-b5e6-96231b3b80d8
relying on sneaking it out of its AliasAnalysis.
This abuse of AA (to shuffle TLI around rather than explicitly depending
on it) is going away with my refactor of AA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244778 91177308-0d34-0410-b5e6-96231b3b80d8
r243382 changed the behavior to always require a set of memchecks to be
passed to LoopVer. This change restores the prior behavior as an
alternative to the new behavior. This allows the checks to be
implicitly taken from the LAA object.
Patch by Ashutosh Nema!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244763 91177308-0d34-0410-b5e6-96231b3b80d8
This abstracts away the test for "when can we fold across a MachineInstruction"
into the the MI interface, and changes call-frame optimization use the same test
the peephole optimizer users.
Differential Revision: http://reviews.llvm.org/D11945
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244729 91177308-0d34-0410-b5e6-96231b3b80d8
This commit transforms the mips-specific 'MipsCallEntry' subclass of the
'PseudoSourceValue' class into two, target-independent subclasses named
'GlobalValuePseudoSourceValue' and 'ExternalSymbolPseudoSourceValue'.
This change makes it easier to serialize the pseudo source values by removing
target-specific pseudo source values.
Reviewers: Akira Hatanaka
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244698 91177308-0d34-0410-b5e6-96231b3b80d8
This commit removes the global manager variable which is responsible for
storing and allocating pseudo source values and instead it introduces a new
manager class named 'PseudoSourceValueManager'. Machine functions now own an
instance of the pseudo source value manager class.
This commit also modifies the 'get...' methods in the 'MachinePointerInfo'
class to construct pseudo source values using the instance of the pseudo
source value manager object from the machine function.
This commit updates calls to the 'get...' methods from the 'MachinePointerInfo'
class in a lot of different files because those calls now need to pass in a
reference to a machine function to those methods.
This change will make it easier to serialize pseudo source values as it will
enable me to transform the mips specific MipsCallEntry PseudoSourceValue
subclass into two target independent subclasses.
Reviewers: Akira Hatanaka
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244693 91177308-0d34-0410-b5e6-96231b3b80d8
This commit introduces a new enumerator named 'PSVKind' in the
'PseudoSourceValue' class. This enumerator is now used to distinguish between
the various kinds of pseudo source values.
This change is done in preparation for the changes to the pseudo source value
object management and to the PseudoSourceValue's class hierarchy - the next two
PseudoSourceValue commits will get rid of the global variable that manages the
pseudo source values and the mips specific MipsCallEntry subclass.
Reviewers: Akira Hatanaka
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244687 91177308-0d34-0410-b5e6-96231b3b80d8
This commit updates the documentation comments in PseudoSourceValue.cpp and
PseudoSourceValue.h based on the LLVM's documentation style. It also fixes
several instances of variable names that started with a lowercase letter.
This change is done in preparation for the changes to the pseudo source value
object management and to the PseudoSourceValue's class hierarchy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244686 91177308-0d34-0410-b5e6-96231b3b80d8
This commit reformats the files lib/CodeGen/PseudoSourceValue.cpp and
include/llvm/CodeGen/PseudoSourceValue.h using clang-format. This change is
done in preparation for the changes to the pseudo source value object
management and to the PseudoSourceValue's class hierarchy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244685 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Check the contents of BBtoRegion during analysis verification. It only takes place if -verify-region-info is passed or LLVM is compiled with XDEBUG.
RegionBase<Tr>::verifyRegion() also checks the RegionInfoBase<Tr>::VerifyRegionInfo flag, which is redundant, but verifyRegion() is public API and might be invoked from other sites. In order to avoid behavioral change, this check is not removed. In any case, no region will be verified unless VerifyRegionInfo is set.
Reviewers: grosser
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11872
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244611 91177308-0d34-0410-b5e6-96231b3b80d8
The intention of these is to be a corollary to ISD::FMINNUM/FMAXNUM,
differing only on how NaNs are treated. FMINNUM returns the non-NaN
input (when given one NaN and one non-NaN), FMINNAN returns the NaN
input instead.
This patch includes support for scalarizing, widening and splitting
vectors, but not expansion or softening. The reason is that these
should never be needed - FMINNAN nodes are only going to be created
in one place (SDAGBuilder::visitSelect) and there we'll check if the
node is legal or custom. I could preemptively add expand and soften
code, but I'm fairly opposed to adding code I can't test. It's bad
enough I can't create tests with this patch, but at least this code
will be exercised by the ARM and AArch64 backends fairly shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244581 91177308-0d34-0410-b5e6-96231b3b80d8
The select pattern recognition in ValueTracking (as used by InstCombine
and SelectionDAGBuilder) only knew about integer patterns. This teaches
it about minimum and maximum operations.
matchSelectPattern() has been extended to return a struct containing the
existing Flavor and a new enum defining the pattern's behavior when
given one NaN operand.
C minnum() is defined to return the non-NaN operand in this case, but
the idiomatic C "a < b ? a : b" would return the NaN operand.
ARM and AArch64 at least have different instructions for these different cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244580 91177308-0d34-0410-b5e6-96231b3b80d8
This patch and a relatec clang patch solve the problem of having to explicitly enable analysis when specifying a loop hint pragma to get the diagnostics. Passing AlwasyPrint as the pass name (see below) causes the front-end to print the diagnostic if the user has specified '-Rpass-analysis' without an '=<target-pass>’. Users of loop hints can pass that compiler option without having to specify the pass and they will get diagnostics for only those loops with loop hints.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244555 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes the UsedPhysRegMask register mask from the machine
register information class. The mask is serialized as an inverted
'calleeSavedRegisters' mask to keep the output minimal.
This commit also allows the MIR parser to infer this mask from the register
mask operands if the machine function doesn't specify it.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244548 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves checking the threshold of runtime pointer checks to the vectorization requirements (late diagnostics) and emits a diagnostic that infroms the user the loop would be vectorized if not for exceeding the pointer-check threshold. Clang will also append the options that can be used to allow vectorization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244523 91177308-0d34-0410-b5e6-96231b3b80d8
With this we finally have an ELFFile that is O(1) to construct. This is helpful
for programs like lld which have to do their own section walk.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244510 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves the verification of fast-math to just before vectorization is done. This way we can tell clang to append the command line options would that allow floating-point commutativity. Specifically those are enableing fast-math or specifying a loop hint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244489 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds a hook to TTI which enables us to selectively turn on by default
interleaved access vectorization for targets on which we have have performed
the required benchmarking.
Reviewers: rengolin
Subscribers: rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11901
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244449 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Analogously to Function::viewCFG(), RegionInfo::view() and RegionInfo::viewOnly() are meant to be called in debugging sessions. They open a viewer to show how RegionInfo currently understands the region hierarchy.
The functions viewRegion(Function*) and viewRegionOnly(Function*) invoke a fresh region analysis of the function in contrast to viewRegion(RegionInfo*) and viewRegionOnly(RegionInfo*) which show the current analysis result.
Reviewers: grosser
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11875
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244444 91177308-0d34-0410-b5e6-96231b3b80d8
PR24139 contains an analysis of poor register allocation. One of the findings
was that when calculating the spill weight, a rematerializable interval once
split is no longer rematerializable. This is because the isRematerializable
check in CalcSpillWeights.cpp does not follow the copies introduced by live
range splitting (after splitting, the live interval register definition is a
copy which is not rematerializable).
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D11686
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244439 91177308-0d34-0410-b5e6-96231b3b80d8
