RPCS3/llvm
1
0
Fork 0
mirror of https://github.com/RPCS3/llvm.git synced 2024-12-19 09:57:42 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
994af148ca
llvm/test/CodeGen/Mips
History
Chandler Carruth d24d326705 [SDAG] Introduce a combined set to the DAG combiner which tracks nodes 
which have successfully round-tripped through the combine phase, and use
this to ensure all operands to DAG nodes are visited by the combiner,
even if they are only added during the combine phase.

This is critical to have the combiner reach nodes that are *introduced*
during combining. Previously these would sometimes be visited and
sometimes not be visited based on whether they happened to end up on the
worklist or not. Now we always run them through the combiner.

This fixes quite a few bad codegen test cases lurking in the suite while
also being more principled. Among these, the TLS codegeneration is
particularly exciting for programs that have this in the critical path
like TSan-instrumented binaries (although I think they engineer to use
a different TLS that is faster anyways).

I've tried to check for compile-time regressions here by running llc
over a merged (but not LTO-ed) clang bitcode file and observed at most
a 3% slowdown in llc. Given that this is essentially a worst case (none
of opt or clang are running at this phase) I think this is tolerable.
The actual LTO case should be even less costly, and the cost in normal
compilation should be negligible.

With this combining logic, it is possible to re-legalize as we combine
which is necessary to implement PSHUFB formation on x86 as
a post-legalize DAG combine (my ultimate goal).

Differential Revision: http://reviews.llvm.org/D4638

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213898 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-24 22:15:28 +00:00
..
cconv [mips] Emit two CFI offset directives per double precision SDC1/LDC1 2014-07-10 22:23:30 +00:00
Fast-ISel Add load/store functionality 2014-06-16 22:05:47 +00:00
llvm-ir [mips][mips64r6] Use JALR for indirect branches instead of JR (which is not available on MIPS32r6/MIPS64r6) 2014-07-09 10:21:59 +00:00
mips32r6 [mips][mips64r6] Add experimental support for MIPS32r6 and MIPS64r6 2014-05-09 09:46:21 +00:00
mips64r6 [mips][mips64r6] Add experimental support for MIPS32r6 and MIPS64r6 2014-05-09 09:46:21 +00:00
msa ps][mips64r6] Added LSA/DLSA instructions 2014-06-20 09:28:09 +00:00
2008-06-05-Carry.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-07-03-SRet.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-07-06-fadd64.ll Re-enable some of the disabled tests. Use FileCheck instead of grep to check 2011-09-21 17:36:30 +00:00
2008-07-07-Float2Int.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-07-07-FPExtend.ll Re-enable some of the disabled tests. Use FileCheck instead of grep to check 2011-09-21 17:36:30 +00:00
2008-07-07-IntDoubleConvertions.ll Re-enable some of the disabled tests. Use FileCheck instead of grep to check 2011-09-21 17:36:30 +00:00
2008-07-15-InternalConstant.ll Re-enable some of the disabled tests. Use FileCheck instead of grep to check 2011-09-21 17:36:30 +00:00
2008-07-15-SmallSection.ll Remove +. 2011-09-21 17:43:48 +00:00
2008-07-16-SignExtInReg.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
2008-07-22-Cstpool.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-07-23-fpcmp.ll Fix the remaining TCL-style quotes found in the testsuite. This is 2012-07-02 19:09:46 +00:00
2008-07-29-icmp.ll Fix the remaining TCL-style quotes found in the testsuite. This is 2012-07-02 19:09:46 +00:00
2008-07-31-fcopysign.ll Custom-lower FCOPYSIGN nodes. 2011-05-25 19:32:07 +00:00
2008-08-01-AsmInline.ll [mips][mips64r6] Improve tests affected by the changes to multiplies and divides 2014-06-11 15:48:00 +00:00
2008-08-03-fabs64.ll Drop support for Allegrex. Allegrex implements a variant of Mips2. 2011-09-09 19:00:51 +00:00
2008-08-03-ReturnDouble.ll Unbreak test, Bruno please check. 2009-11-19 07:18:49 +00:00
2008-08-04-Bitconvert.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-08-06-Alloca.ll Fix test cases to use FileCheck. 2011-12-02 22:28:09 +00:00
2008-08-07-CC.ll Correct bogus module triple specifications. 2010-08-30 10:48:29 +00:00
2008-08-07-FPRound.ll Re-enable some of the disabled tests. Use FileCheck instead of grep to check 2011-09-21 17:36:30 +00:00
2008-08-08-bswap.ll Drop support for Allegrex. Allegrex implements a variant of Mips2. 2011-09-09 19:00:51 +00:00
2008-08-08-ctlz.ll Manually upgrade the test suite to specify the flag to cttz and ctlz. 2011-12-12 11:59:10 +00:00
2008-10-13-LegalizerBug.ll Eliminate more uses of llvm-as and llvm-dis. 2009-09-09 00:09:15 +00:00
2008-11-10-xint_to_fp.ll Remove the no longer existent psp triple from a test. 2012-03-08 21:22:27 +00:00
2009-11-16-CstPoolLoad.ll [mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler. 2014-02-20 14:58:19 +00:00
2010-07-20-Switch.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
2010-11-09-CountLeading.ll Manually upgrade the test suite to specify the flag to cttz and ctlz. 2011-12-12 11:59:10 +00:00
2010-11-09-Mul.ll Fix test cases. 2011-09-09 23:14:58 +00:00
2011-05-26-BranchKillsVreg.ll Fix PR10046 by updating LiveVariables kill info when splitting live ranges. 2011-05-29 20:10:28 +00:00
2012-12-12-ExpandMemcpy.ll Fix a logic bug in inline expansion of memcpy / memset with an overlapping 2012-12-12 20:43:23 +00:00
2013-11-18-fp64-const0.ll [mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 2014-06-12 11:55:58 +00:00
abicalls.ll [mips] Fix emission of '.option pic0' for MIPS-IV. 2014-04-16 13:58:57 +00:00
abiflags32.ll [mips] Do not emit '.module fp=...' unless we really need to. 2014-07-21 15:25:24 +00:00
abiflags-xx.ll [mips] Expand BuildPairF64 to a spill and reload when the O32 FPXX ABI is 2014-07-14 09:40:29 +00:00
addc.ll Add a testcase for the addc improvements introduced some commits ago. Patch by Akira Hatanaka 2011-03-09 21:05:32 +00:00
addi.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
addressing-mode.ll Initial implementation of MipsTargetLowering::isLegalAddressingMode. 2012-11-17 00:25:41 +00:00
align16.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
alloca16.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
alloca.ll TBAA: remove !tbaa from testing cases if not used. 2013-04-30 17:52:57 +00:00
analyzebranch.ll [mips][mips64r6] Correct cond names in the cmp.cond.[ds] instructions 2014-07-09 10:40:20 +00:00
and1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
asm-large-immediate.ll The inline asm operand modifier 'n' is suppose 2012-06-21 21:37:54 +00:00
atomic.ll Replace the result usages while legalizing cmpxchg. 2014-07-21 17:33:44 +00:00
atomicops.ll IR: add "cmpxchg weak" variant to support permitted failure. 2014-06-13 14:24:07 +00:00
beqzc1.ll Make all the conditional Mips 16 branches get initially set for the 2013-11-15 02:21:52 +00:00
beqzc.ll Make all the conditional Mips 16 branches get initially set for the 2013-11-15 02:21:52 +00:00
biggot.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
blez_bgez.ll [mips] Make mips64 the default CPU for the mips64 architecture 2014-02-20 13:13:33 +00:00
blockaddr.ll [mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler. 2014-02-20 14:58:19 +00:00
br-jmp.ll Expand pseudos/macros for Selt. This is the last of the complex 2013-02-23 03:09:56 +00:00
brconeq.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconeqk.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconeqz.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconge.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brcongt.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconle.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconlt.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconne.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconnek.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brconnez.ll Add conditional branch instructions and their patterns. 2012-10-17 22:29:54 +00:00
brdelayslot.ll [mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out 2013-09-28 00:12:32 +00:00
brind.ll Implement brind operator for mips16. 2012-10-28 23:08:07 +00:00
brsize3.ll Take care of long short branch immediate instructions for mips16 in 2013-11-13 23:52:18 +00:00
brsize3a.ll Take care of long short branch immediate instructions for mips16 in 2013-11-13 23:52:18 +00:00
bswap.ll [mips] Check emitted code for llvm.bswap.i32 on MIPS16/MIPS64 and llvm.bswap.i64 on MIPS16. 2014-03-31 11:00:04 +00:00
buildpairextractelementf64.ll [mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves 2014-07-14 12:41:31 +00:00
cache-intrinsic.ll Add @llvm.clear_cache builtin 2014-03-26 12:52:28 +00:00
call-optimization.ll [mips] Fix test case. 2013-12-07 02:48:29 +00:00
cfi_offset.ll [mips] Emit two CFI offset directives per double precision SDC1/LDC1 2014-07-10 22:23:30 +00:00
check-noat.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
ci2.ll Fix a funny bug I introduced during conversion of ARM constant islands to Mips. 2013-11-24 02:53:09 +00:00
cmov.ll [SDAG] Introduce a combined set to the DAG combiner which tracks nodes 2014-07-24 22:15:28 +00:00
cmplarge.ll TBAA: remove !tbaa from testing cases when they are not needed. 2013-09-30 18:17:35 +00:00
const1.ll Make first substantial checkin of my port of ARM constant islands code to Mips. 2013-10-27 21:57:36 +00:00
const4a.ll Fix broken CHECK lines. 2014-01-11 21:06:00 +00:00
const6.ll Update older test cases for latest patch. 2013-11-24 03:37:56 +00:00
const6a.ll Adjust offsets for max load instruction offsets. This is more pessimistic 2014-01-16 00:47:46 +00:00
const-mult.ll [mips] Make mips64 the default CPU for the mips64 architecture 2014-02-20 13:13:33 +00:00
constantfp0.ll Test case for 137484 2011-08-12 18:12:06 +00:00
countleading.ll [mips][mips64r6] Correct select patterns that have the condition or true/false values backwards 2014-07-09 10:47:26 +00:00
cprestore.ll Fix test cases. 2012-05-12 03:25:16 +00:00
ctlz.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
DbgValueOtherTargets.test Remove unnecessary leading comment characters in lit-only file 2013-03-18 22:08:16 +00:00
disable-tail-merge.ll [mips] Test case for r192124. 2013-10-07 21:32:57 +00:00
div_rem.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
div.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
divrem.ll [mips][mips64r6] Replace m[tf]hi, m[tf]lo, mult, multu, dmult, dmultu, div, ddiv, divu, ddivu for MIPS32r6/MIPS64. 2014-06-12 10:44:10 +00:00
divu_remu.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
divu.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
double2int.ll Fix test cases. 2011-09-09 23:14:58 +00:00
dsp-patterns-cmp-vselect.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
dsp-patterns.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
dsp-r1.ll [mips][mips64r6] madd/maddu/msub/msubu are not available on MIPS32r6/MIPS64r6 2014-06-12 10:54:16 +00:00
dsp-r2.ll MIPS DSP: add operands to make sure instruction strings are being matched. 2012-09-28 21:23:16 +00:00
dsp-vec-load-store.ll [mips] Expand vector truncating stores and extending loads. 2013-08-02 19:23:33 +00:00
eh-dwarf-cfa.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
eh-return32.ll [mips][mips64r6] Use JALR for returns instead of JR (which is not available on MIPS32r6/MIPS64r6) 2014-07-09 10:16:07 +00:00
eh-return64.ll [mips][mips64r6] Use JALR for returns instead of JR (which is not available on MIPS32r6/MIPS64r6) 2014-07-09 10:16:07 +00:00
eh.ll TBAA: remove !tbaa from testing cases if not used. 2013-04-30 17:52:57 +00:00
ehframe-indirect.ll Fix MIPS exception personality encoding. 2014-05-30 16:48:56 +00:00
elf_eflags.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
emit-big-cst.ll Teach AsmPrinter how to print odd constants. 2013-06-07 18:36:03 +00:00
ex2.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
extins.ll [mips] Do not generate INS/EXT nodes if target does not have support for 2013-10-09 23:36:17 +00:00
f16abs.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
fabs.ll Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math 2014-04-09 09:56:43 +00:00
fastcc.ll [mips] Forbid the use of registers t6, t7 and t8 if the target is NaCl. 2014-02-07 17:16:40 +00:00
fcmp.ll Make it possible for ints/floats to return different values from getBooleanContents() 2014-07-10 10:18:12 +00:00
fcopysign-f32-f64.ll [mips] Fix fcopysign for MIPS-IV and add the test. 2014-04-14 16:24:12 +00:00
fcopysign.ll [mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 2014-06-12 11:55:58 +00:00
fixdfsf.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
fmadd1.ll [mips] Use MTHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 2014-06-12 11:55:58 +00:00
fneg.ll Re-commit: [mips] abs.[ds], and neg.[ds] should be allowed regardless of -enable-no-nans-fp-math 2014-04-09 09:56:43 +00:00
fp16instrinsmc.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
fp16mix.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
fp16static.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
fp64a.ll [mips] For the FP64A ABI, odd-numbered double-precision moves must not use mtc1/mfc1. 2014-07-14 13:08:14 +00:00
fp-indexed-ls.ll [mips][mips64r6] [sl][duw]xc1 are not available on MIPS32r6/MIPS64r6 2014-06-12 14:19:28 +00:00
fp-spill-reload.ll Make register FP allocatable if the compiled function does not have dynamic 2012-05-09 01:38:13 +00:00
fpbr.ll [mips][mips64r6] bc1[tf] are not available on MIPS32r6/MIPS64r6 2014-06-12 15:00:17 +00:00
fpneeded.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
fpnotneeded.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
fptr2.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
fpxx.ll [mips] For the FP64A ABI, odd-numbered double-precision moves must not use mtc1/mfc1. 2014-07-14 13:08:14 +00:00
frame-address.ll Add more addFrameMove test coverage. 2013-05-16 14:51:26 +00:00
frem.ll Expand FREM. 2012-03-29 18:43:11 +00:00
global-address.ll [mips] Make it impossible to have UnknownABI in CodeGen and Integrated Assembler. 2014-02-20 14:58:19 +00:00
global-pointer-reg.ll Make the following changes in MipsAsmPrinter.cpp: 2012-05-12 00:48:43 +00:00
gpreg-lazy-binding.ll [mips] Print move instructions. 2013-03-04 22:25:01 +00:00
gprestore.ll Fix test cases. 2012-05-12 03:25:16 +00:00
helloworld.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
hf1_body.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
hf16_1.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
hf16call32_body.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
hf16call32.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
hfptrcall.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
i32k.ll Check in conditional branches for constant islands. Still need to finish 2013-11-28 00:56:37 +00:00
i64arg.ll [mips] Make sure there is a chain edge dependency between loads that read 2013-11-09 02:38:51 +00:00
imm.ll Add a test case for r146900. 2011-12-19 20:24:28 +00:00
indirectcall.ll jalr should use t9 ($25) for indirect calls regardless of the relocation model 2011-12-09 01:45:12 +00:00
init-array.ll Fix UseInitArray option for MIPS target. 2012-09-05 06:17:17 +00:00
inlineasm64.ll Have getRegForInlineAsmConstraint return the correct register class when target 2012-01-04 02:45:01 +00:00
inlineasm_constraint.ll [mips] Change lwl and lwr in inlineasm_constraint.ll to lw 2014-05-22 11:51:06 +00:00
inlineasm-cnstrnt-bad-I-1.ll [mips] Use addiu in inline assembly tests since addi is not available in all ISA's 2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-J.ll [mips] Use addiu in inline assembly tests since addi is not available in all ISA's 2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-K.ll Add support for the inline asm constraint 'K'. 2012-05-07 05:46:29 +00:00
inlineasm-cnstrnt-bad-L.ll [mips] Use addiu in inline assembly tests since addi is not available in all ISA's 2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-N.ll [mips] Use addiu in inline assembly tests since addi is not available in all ISA's 2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-O.ll [mips] Use addiu in inline assembly tests since addi is not available in all ISA's 2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-bad-P.ll [mips] Use addiu in inline assembly tests since addi is not available in all ISA's 2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-reg64.ll [mips] Use addiu in inline assembly tests since addi is not available in all ISA's 2014-05-22 11:46:58 +00:00
inlineasm-cnstrnt-reg.ll [mips][mips64r6] Improve tests affected by the changes to multiplies and divides 2014-06-11 15:48:00 +00:00
inlineasm-operand-code.ll [mips] Use addiu in inline assembly tests since addi is not available in all ISA's 2014-05-22 11:46:58 +00:00
inlineasmmemop.ll Mips specific inline asm memory operand modifier test case 2013-04-11 19:39:19 +00:00
int-to-float-conversion.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
internalfunc.ll Fix test cases. 2012-05-12 03:25:16 +00:00
jtstat.ll Test case hygiene. 2013-03-09 18:25:40 +00:00
l3mc.ll This patch has two main functions: 2014-02-14 19:16:39 +00:00
largeimm1.ll [mips] Use register number instead of name to print register $AT. 2012-11-02 21:26:03 +00:00
largeimmprinting.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
lazy-binding.ll [mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out 2013-09-28 00:12:32 +00:00
lb1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
lbu1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
lcb2.ll Check in conditional branches for constant islands. Still need to finish 2013-11-28 00:56:37 +00:00
lcb3c.ll Part 1 of 3 patches that completes very long conditional branches 2013-11-29 22:32:56 +00:00
lcb4a.ll final patch for very long conditional branches for mips16 constant islands. 2013-12-03 23:42:51 +00:00
lcb5.ll final patch for very long conditional branches for mips16 constant islands. 2013-12-03 23:42:51 +00:00
lh1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
lhu1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
lit.local.cfg Reduce verbiage of lit.local.cfg files 2014-06-09 22:42:55 +00:00
llcarry.ll Implement carry for subtract/add for mips16 2012-10-26 04:46:26 +00:00
load-store-left-right.ll [mips][mips64r6] [ls][dw][lr] are not available in MIPS32r6/MIPS64r6 2014-05-23 13:18:02 +00:00
longbranch.ll [mips] Modify long branch for NaCl: 2014-06-05 13:52:08 +00:00
machineverifier.ll Make machine verifier check the first instruction of the last bundle instead of 2012-06-14 20:51:13 +00:00
madd-msub.ll [mips][mips64r6] madd/maddu/msub/msubu are not available on MIPS32r6/MIPS64r6 2014-06-12 10:54:16 +00:00
mature-mc-support.ll Re-commit: Demote EmitRawText call in AsmPrinter::EmitInlineAsm() and remove hasRawTextSupport() call 2014-02-13 14:44:26 +00:00
mbrsize4a.ll Add, to constant islands, long jumps similar to ARM far branch. 2013-11-21 05:13:23 +00:00
memcpy.ll Set a higher value for maxStoresPerMemcpy in MipsISelLowering.cpp. 2012-06-13 19:33:32 +00:00
micromips-atomic.ll Fixed operand of SC microMIPS instruction. 2014-02-28 18:22:56 +00:00
micromips-directives.ll [mips] Emit '.set nomicromips' before a function's entry label 2014-04-16 11:46:59 +00:00
micromips-jal.ll Fixed issue with microMIPS JAL instruction. 2014-03-31 14:00:10 +00:00
micromips-load-effective-address.ll Test case micromips-load-effective-address.s renamed to micromips-load-effective-address.ll and moved to test/CodeGen/Mips. 2014-01-14 16:26:47 +00:00
mips16_32_1.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_3.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_4.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_5.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_6.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_7.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_8.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_9.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_32_10.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
mips16_fpret.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
mips16-hf-attr.ll [Mips] Does not take in account 'use-soft-float' attribute's value when 2013-12-25 17:00:27 +00:00
mips16ex.ll Print a=b as an assignment. 2014-06-24 22:45:16 +00:00
mips16fpe.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
mips64-f128-call.ll [mips] Add a line which checks function name. Rename file. 2013-03-06 01:58:03 +00:00
mips64-f128.ll [mips][mips64r6] Correct select patterns that have the condition or true/false values backwards 2014-07-09 10:47:26 +00:00
mips64-libcall.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
mips64-sret.ll Allow sret on the second parameter as well as the first 2014-05-09 22:32:13 +00:00
mips64directive.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64ext.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64extins.ll Add definitions of 64-bit extract and insert instrucions and make 2011-12-05 21:26:34 +00:00
mips64fpimm0.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64fpldst.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64imm.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64instrs.ll [mips][mips64r6] cl[oz], and dcl[oz] are re-encoded in MIPS32r6/MIPS64r6 2014-06-16 13:18:59 +00:00
mips64intldst.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64lea.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
mips64muldiv.ll [mips][mips64r6] Replace m[tf]hi, m[tf]lo, mult, multu, dmult, dmultu, div, ddiv, divu, ddivu for MIPS32r6/MIPS64. 2014-06-12 10:44:10 +00:00
mips64shift.ll Remove definitions of double word shift plus 32 instructions. Assembler or 2011-12-19 19:44:09 +00:00
mipslopat.ll Upgrade syntax of tests using volatile instructions to use 'load volatile' instead of 'volatile load', which is archaic. 2011-11-27 06:54:59 +00:00
misha.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
mno-ldc1-sdc1.ll [mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves 2014-07-14 12:41:31 +00:00
mul.ll Patch for integer multiply, signed/unsigned, long/long long. 2012-10-05 18:27:54 +00:00
mulll.ll Patch for integer multiply, signed/unsigned, long/long long. 2012-10-05 18:27:54 +00:00
mulull.ll Patch for integer multiply, signed/unsigned, long/long long. 2012-10-05 18:27:54 +00:00
nacl-align.ll Moved test file from test/MC/Mips to test/CodeGen/Mips. 2014-03-07 22:08:46 +00:00
nacl-branch-delay.ll [mips] Implement NaCl sandboxing of loads, stores and SP changes: 2014-03-10 20:34:23 +00:00
nacl-reserved-regs.ll [mips] Forbid the use of registers t6, t7 and t8 if the target is NaCl. 2014-02-07 17:16:40 +00:00
neg1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
no-odd-spreg.ll [mips] Do not emit '.module [no]oddspreg' unless we really need to. 2014-07-21 10:45:47 +00:00
nomips16.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
not1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
null-streamer.ll [Mips] Add a target streamer when creating a null streamer. 2014-06-23 19:43:40 +00:00
null.ll Fix a low hanging use of hasRawTextSupport. 2014-01-14 18:57:12 +00:00
o32_cc_byval.ll [mips] Set instruction itineraries of loads, stores and conditional moves. 2013-09-06 23:28:24 +00:00
o32_cc_vararg.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
o32_cc.ll [mips] Use MFHC1 when it is available (MIPS32r2 and later) for both FP32 and FP64 moves 2014-07-14 12:41:31 +00:00
octeon_popcnt.ll [MIPS] Add cpu octeon and some instructions 2014-03-20 11:51:58 +00:00
octeon.ll [mips] Add more Octeon cnMips instructions 2014-04-02 18:40:43 +00:00
optimize-fp-math.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
optimize-pic-o0.ll Fix regression with -O0 for mips . 2014-03-10 16:31:25 +00:00
or1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
powif64_16.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
prevent-hoisting.ll Prevent hoisting the instruction whose def might be clobbered by the terminator. 2014-06-05 13:42:48 +00:00
private.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
ra-allocatable.ll TBAA: remove !tbaa from testing cases when they are not needed. 2013-08-21 22:20:53 +00:00
rdhwr-directives.ll test case for r159770. 2012-07-05 19:29:31 +00:00
rem.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
remat-immed-load.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
remu.ll Div, Rem int/unsigned int 2012-10-12 02:01:09 +00:00
return_address.ll [mips] Print move instructions. 2013-03-04 22:25:01 +00:00
return-vector.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
rotate.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
s2rem.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
sb1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
sel1c.ll [mips] Small code generation improvement for conditional operator (select) 2013-12-05 12:07:05 +00:00
sel2c.ll [mips] Small code generation improvement for conditional operator (select) 2013-12-05 12:07:05 +00:00
select.ll Make it possible for ints/floats to return different values from getBooleanContents() 2014-07-10 10:18:12 +00:00
selectcc.ll [mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6 2014-06-12 13:39:06 +00:00
seleq.ll Beginning of expanding all current mips16 macro/pseudo instruction sequences. 2013-02-18 00:59:04 +00:00
seleqk.ll Expand pseudos BteqzT8CmpiX16 and BtnezT8CmpiX16. 2013-02-19 00:20:58 +00:00
selgek.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
selgt.ll Expand pseudo/macro BteqzT8SltX16. 2013-02-18 04:04:26 +00:00
selle.ll Expand macro/pseudo instructions BtnezT8SltX16 and BtnezT8SltuX16. 2013-02-18 05:43:03 +00:00
selltk.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
selne.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
selnek.ll Convert CodeGen/*/*.ll tests to use the new CHECK-LABEL for easier debugging. No functionality change and all tests pass after conversion. 2013-07-13 20:38:47 +00:00
selpat.ll Expand pseudos/macros for Selt. This is the last of the complex 2013-02-23 03:09:56 +00:00
selTBteqzCmpi.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
selTBtnezCmpi.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
selTBtnezSlti.ll Expand mips16 SelT form pseudso/macros. 2013-02-22 05:10:51 +00:00
setcc-se.ll [mips] Print instructions "beq", "bne" and "or" using assembler pseudo 2013-07-26 18:34:25 +00:00
seteq.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
seteqz.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setge.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setgek.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setle.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setlt.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setltk.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setne.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setuge.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setugt.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setule.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setult.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
setultk.ll Expand pseudos/macros: 2013-02-20 05:45:15 +00:00
sh1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
shift-parts.ll Expand 64-bit shifts if target ABI is O32. 2012-05-09 00:55:21 +00:00
simplebr.ll Change the default branch instruction to be the 16 bit variety for mips16. 2013-11-12 02:27:12 +00:00
sint-fp-store_pattern.ll [mips] MIPS-IV is broadly the same as MIPS64 so duplicate all -mcpu=mips64 tests with -mcpu=mips4 as a starting point 2014-04-14 16:00:28 +00:00
sitofp-selectcc-opt.ll Test case for r160036. 2012-07-11 19:50:46 +00:00
sll1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
sll2.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
small-section-reserve-gp.ll In MipsDAGToDAGISel::SelectAddr, fold add node into address operand, if its 2012-08-24 20:21:49 +00:00
spill-copy-acreg.ll [mips] Handle reading, writing or copying of ccond field of DSP control 2013-05-02 23:07:05 +00:00
sr1.ll Last change for mips16 prolog/epilog cleanup and optimization. 2013-12-15 20:49:30 +00:00
sra1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
sra2.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
srl1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
srl2.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
stack-alignment.ll [mips] Partially revert r193641. Stack alignment should not be determined by 2013-11-11 21:49:03 +00:00
stackcoloring.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
stacksize.ll Test case for r159240. 2012-06-27 00:40:34 +00:00
start-asm-file.ll [mips] Add initial support for NaN2008 in the back-end. 2014-04-16 15:48:55 +00:00
stchar.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
stldst.ll checking test case for r164811. was an omission to not check this in. this was already approved 2012-10-01 21:35:06 +00:00
sub1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
sub2.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
swzero.ll Don't modify MO while use_iterator is still pointing to it. 2012-08-09 22:08:24 +00:00
tail16.ll Fix a problem with mips16 stubs when calls are transformed during 2013-12-18 23:57:48 +00:00
tailcall.ll [mips] Make sure there is a chain edge dependency between loads that read 2013-11-09 02:38:51 +00:00
tls16_2.ll Implement MipsHi for mips16 2012-10-27 00:57:14 +00:00
tls16.ll implement mips16 tls global addr 2012-10-26 22:57:32 +00:00
tls-alias.ll [pr19844] Add thread local mode to aliases. 2014-05-28 18:15:43 +00:00
tls-models.ll Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. 2013-07-14 06:24:09 +00:00
tls.ll Add extra CHECK prefix to tests with explicit prefix 2014-02-16 13:28:15 +00:00
tnaked.ll Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'. 2013-08-22 21:28:54 +00:00
trap1.ll [Mips] Adjust float ABI settings in case of MIPS16 mode. 2013-11-19 12:20:17 +00:00
trap.ll [mips] Implement llvm.trap intrinsic. 2013-07-26 20:58:55 +00:00
uitofp.ll Fix bug 13532. 2012-08-28 02:12:42 +00:00
ul1.ll Handled unaligned load/stores properly in Mips16 2012-09-15 01:02:03 +00:00
unalignedload.ll [mips][mips64r6] [ls][dw][lr] are not available in MIPS32r6/MIPS64r6 2014-05-23 13:18:02 +00:00
vector-load-store.ll MIPS DSP: add vector load/store patterns. 2012-09-27 01:50:59 +00:00
vector-setcc.ll [mips] MipsTargetLowering::getSetCCResultType should return a vector type if 2013-01-04 20:06:01 +00:00
weak.ll Define WeakRefDirective. 2011-05-25 23:30:30 +00:00
xor1.ll 1. Redo mips16 instructions to avoid multiple opcodes for same instruction. 2012-08-03 22:57:02 +00:00
zeroreg.ll [mips][mips64r6] c.cond.fmt, mov[fntz], and mov[fntz].[ds] are not available on MIPS32r6/MIPS64r6 2014-06-12 13:39:06 +00:00