because it does not support CMOV of vectors. To implement this efficientlyi, we broadcast the condition bit and use a sequence of NAND-OR
to select between the two operands. This is the same sequence we use for targets that don't have vector BLENDs (like SSE2).
rdar://12201387
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162926 91177308-0d34-0410-b5e6-96231b3b80d8
- Add 'UseSSEx' to force SSE legacy insn not being selected when AVX is
enabled.
As the penalty of inter-mixing SSE and AVX instructions, we need
prevent SSE legacy insn from being generated except explicitly
specified through some intrinsics. For patterns supported by both
SSE and AVX, so far, we force AVX insn will be tried first relying on
AddedComplexity or position in td file. It's error-prone and
introduces bugs accidentally.
'UseSSEx' is disabled when AVX is turned on. For SSE insns inherited
by AVX, we need this predicate to force VEX encoding or SSE legacy
encoding only.
For insns not inherited by AVX, we still use the previous predicates,
i.e. 'HasSSEx'. So far, these insns fall into the following
categories:
* SSE insns with MMX operands
* SSE insns with GPR/MEM operands only (xFENCE, PREFETCH, CLFLUSH,
CRC, and etc.)
* SSE4A insns.
* MMX insns.
* x87 insns added by SSE.
2 test cases are modified:
- test/CodeGen/X86/fast-isel-x86-64.ll
AVX code generation is different from SSE one. 'vcvtsi2sdq' cannot be
selected by fast-isel due to complicated pattern and fast-isel
fallback to materialize it from constant pool.
- test/CodeGen/X86/widen_load-1.ll
AVX code generation is different from SSE one after fixing SSE/AVX
inter-mixing. Exec-domain fixing prefers 'vmovapd' instead of
'vmovaps'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162919 91177308-0d34-0410-b5e6-96231b3b80d8
- The root cause is that target constant materialization in X86 fast-isel
creates a PC-rel addressing which may overflow 32-bit range in non-Small code
model if .rodata section is allocated too far away from code segment in
MCJIT, which uses Large code model so far.
- Follow the similar logic to fix non-Small code model in fast-isel by skipping
non-Small code model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162881 91177308-0d34-0410-b5e6-96231b3b80d8
We need to reserve space for the mandatory traceback fields,
though leaving them as zero is appropriate for now.
Although the ABI calls for these fields to be filled in fully, no
compiler on Linux currently does this, and GDB does not read these
fields. GDB uses the first word of zeroes during exception handling to
find the end of the function and the size field, allowing it to compute
the beginning of the function. DWARF information is used for everything
else. We need the extra 8 bytes of pad so the size field is found in
the right place.
As a comparison, GCC fills in a few of the fields -- language, number
of saved registers -- but ignores the rest. IBM's proprietary OSes do
make use of the full traceback table facility.
Patch by Bill Schmidt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162854 91177308-0d34-0410-b5e6-96231b3b80d8
traceback table on PowerPC64. This helps gdb handle exceptions. The other
mandatory fields are ignored by gdb and harder to implement so just add
there a FIXME.
Patch by Bill Schmidt. PR13641.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162778 91177308-0d34-0410-b5e6-96231b3b80d8
Add subtargets for Freescale e500mc (32-bit) and e5500 (64-bit) to
the PowerPC backend.
Patch by Tobias von Koch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162764 91177308-0d34-0410-b5e6-96231b3b80d8
it here, then a 'register-memory' version would wrongly get the commutative
flag.
<rdar://problem/12180135>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162741 91177308-0d34-0410-b5e6-96231b3b80d8
- Add a target-specific DAG optimization to recognize a pattern PTEST-able.
Such a pattern is a OR'd tree with X86ISD::OR as the root node. When
X86ISD::OR node has only its flag result being used as a boolean value and
all its leaves are extracted from the same vector, it could be folded into an
X86ISD::PTEST node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162735 91177308-0d34-0410-b5e6-96231b3b80d8
These extra flags are not required to properly order the atomic
load/store instructions. SelectionDAGBuilder chains atomics as if they
were volatile, and SelectionDAG::getAtomic() sets the isVolatile bit on
the memory operands of all atomic operations.
The volatile bit is enough to order atomic loads and stores during and
after SelectionDAG.
This means we set mayLoad on atomic_load, mayStore on atomic_store, and
mayLoad+mayStore on the remaining atomic read-modify-write operations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162733 91177308-0d34-0410-b5e6-96231b3b80d8
Instructions emitted to compute branch offsets now use immediate operands
instead of symbolic labels. This change was needed because there were problems
when R_MIPS_HI16/LO16 relocations were used to make shared objects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162731 91177308-0d34-0410-b5e6-96231b3b80d8
In SelectionDAGLegalize::ExpandLegalINT_TO_FP, expand INT_TO_FP nodes without
using any f64 operations if f64 is not a legal type.
Patch by Stefan Kristiansson.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162728 91177308-0d34-0410-b5e6-96231b3b80d8
Allow load-immediates to be rematerialised in the register coalescer for
PPC. This makes test/CodeGen/PowerPC/big-endian-formal-args.ll fail,
because it relies on a register move getting emitted. The immediate load is
equivalent, so change this test case.
Patch by Tobias von Koch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162727 91177308-0d34-0410-b5e6-96231b3b80d8
The 32-bit ABI requires CR bit 6 to be set if the call has fp arguments and
unset if it doesn't. The solution up to now was to insert a MachineNode to
set/unset the CR bit, which produces a CR vreg. This vreg was then copied
into CR bit 6. When the register allocator saw a bunch of these in the same
function, it allocated the set/unset CR bit in some random CR register (1
extra instruction) and then emitted CR moves before every vararg function
call, rather than just setting and unsetting CR bit 6 directly before every
vararg function call. This patch instead inserts a PPCcrset/PPCcrunset
instruction which are then matched by a dedicated instruction pattern.
Patch by Tobias von Koch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162725 91177308-0d34-0410-b5e6-96231b3b80d8
The zeroextend IR instruction is lowered to an 'and' node with an immediate
mask operand, which in turn gets legalised to a sequence of ori's & ands.
This can be done more efficiently using the rldicl instruction.
Patch by Tobias von Koch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162724 91177308-0d34-0410-b5e6-96231b3b80d8
corresponding changes to existing tests for darwin triple to ensure that
same pattern is tested for bdver2 target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162655 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, instructions without a primary patterns wouldn't get their
properties inferred. Now, we use all single-instruction patterns for
inference, including 'def : Pat<>' instances.
This causes a lot of instruction flags to change.
- Many instructions no longer have the UnmodeledSideEffects flag because
their flags are now inferred from a pattern.
- Instructions with intrinsics will get a mayStore flag if they already
have UnmodeledSideEffects and a mayLoad flag if they already have
mayStore. This is because intrinsics properties are linear.
- Instructions with atomic_load patterns get a mayStore flag because
atomic loads can't be reordered. The correct workaround is to create
pseudo-instructions instead of using normal loads. PR13693.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162614 91177308-0d34-0410-b5e6-96231b3b80d8
the case of multiple edges from one block to another.
A simple example is a switch statement with multiple values to the same
destination. The definition of an edge is modified from a pair of blocks to
a pair of PredBlock and an index into the successors.
Also set the weight correctly when building SelectionDAG from LLVM IR,
especially when converting a Switch.
IntegersSubsetMapping is updated to calculate the weight for each cluster.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162572 91177308-0d34-0410-b5e6-96231b3b80d8
to prevent it from being clobbered. mips uses $gp to access small data section.
This bug was originally reported by Carl Norum.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162340 91177308-0d34-0410-b5e6-96231b3b80d8
IR that hasn't been through SimplifyCFG can look like this:
br i1 %b, label %r, label %r
Make sure we don't create duplicate Machine CFG edges in this case.
Fix the machine code verifier to accept conditional branches with a
single CFG edge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162230 91177308-0d34-0410-b5e6-96231b3b80d8
this allows for better code generation.
Added a new DAGCombine transformation to convert FMAX and FMIN to FMANC and
FMINC, which are commutative.
For example:
movaps %xmm0, %xmm1
movsd LC(%rip), %xmm0
minsd %xmm1, %xmm0
becomes:
minsd LC(%rip), %xmm0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162187 91177308-0d34-0410-b5e6-96231b3b80d8
Add these transformations to the existing add/sub ones:
(and (select cc, -1, c), x) -> (select cc, x, (and, x, c))
(or (select cc, 0, c), x) -> (select cc, x, (or, x, c))
(xor (select cc, 0, c), x) -> (select cc, x, (xor, x, c))
The selects can then be transformed to a single predicated instruction
by peephole.
This transformation will make it possible to eliminate the ISD::CAND,
COR, and CXOR custom DAG nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162176 91177308-0d34-0410-b5e6-96231b3b80d8
arithmetic instructions. However, when small data types are used, a truncate
node appears between the SETCC node and the arithmetic operation. This patch
adds support for this pattern.
Before:
xorl %esi, %edi
testb %dil, %dil
setne %al
ret
After:
xorb %dil, %sil
setne %al
ret
rdar://12081007
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162160 91177308-0d34-0410-b5e6-96231b3b80d8
PEI can't handle the pseudo-instructions. This can be removed when the
pseudo-instructions are replaced by normal predicated instructions.
Fixes PR13628.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162130 91177308-0d34-0410-b5e6-96231b3b80d8
I really need to find a way to automate this, but I can't come up with a regex
that has no false positives while handling tricky cases like custom check
prefixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162097 91177308-0d34-0410-b5e6-96231b3b80d8
It is not my plan to duplicate the entire ARM instruction set with
predicated versions. We need a way of representing predicated
instructions in SSA form without requiring a separate opcode.
Then the pseudo-instructions can go away.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162061 91177308-0d34-0410-b5e6-96231b3b80d8
Without fastcc support, the caller just falls through to CallingConv::C
for fastcc, but callee still uses fastcc, this inconsistency of calling
convention is a problem, and fastcc support can fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162013 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM select instructions are just predicated moves. If the select is
the only use of an operand, the instruction defining the operand can be
predicated instead, saving one instruction and decreasing register
pressure.
This implementation can turn AND/ORR/EOR instructions into their
corresponding ANDCC/ORRCC/EORCC variants. Ideally, we should be able to
predicate any instruction, but we don't yet support predicated
instructions in SSA form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161994 91177308-0d34-0410-b5e6-96231b3b80d8
around. That's not how we do things. Besides, the commit message tells us that
it is covered by the GCC test suite.
------------------------------------------------------------------------
r127497 | zwarich | 2011-03-11 13:51:56 -0800 (Fri, 11 Mar 2011) | 3 lines
Fix the GCC test suite issue exposed by r127477, which was caused by stack
protector insertion not working correctly with unreachable code. Since that
revision was rolled out, this test doesn't actual fail before this fix.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161985 91177308-0d34-0410-b5e6-96231b3b80d8
reversed. This leads to wrong codegen for float-to-half conversion
intrinsics which are used to support storage-only fp16 type.
NEON variants of same instructions are fine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161907 91177308-0d34-0410-b5e6-96231b3b80d8
- FP_EXTEND only support extending from vectors with matching elements.
This results in the scalarization of extending to v2f64 from v2f32,
which will be legalized to v4f32 not matching with v2f64.
- add X86-specific VFPEXT supproting extending from v4f32 to v2f64.
- add BUILD_VECTOR lowering helper to recover back the original
extending from v4f32 to v2f64.
- test case is enhanced to include different vector width.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161894 91177308-0d34-0410-b5e6-96231b3b80d8
and allow some optimizations to turn conditional branches into unconditional.
This commit adds a simple control-flow optimization which merges two consecutive
basic blocks which are connected by a single edge. This allows the codegen to
operate on larger basic blocks.
rdar://11973998
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161852 91177308-0d34-0410-b5e6-96231b3b80d8
It is still possible to if-convert if the tail block has extra
predecessors, but the tail phis must be rewritten instead of being
removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161781 91177308-0d34-0410-b5e6-96231b3b80d8
This was causing unnecessary spills/restores of callee saved registers.
Fixes PR13572.
Patch by Pranav Bhandarkar!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161778 91177308-0d34-0410-b5e6-96231b3b80d8
OpTbl1 to OpTbl2 since they have 3 operands and the last operand can be changed
to a memory operand.
PR13576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161769 91177308-0d34-0410-b5e6-96231b3b80d8
architecture
It broke MultiSource/Applications/JM/ldecod/ldecod on armv7 thumb O0 g and armv7
thumb O3.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161736 91177308-0d34-0410-b5e6-96231b3b80d8
- FCMOV only supports a subset of X86 conditions. Skip boolean
simplification if X86 condition is not valid for FCMOV.
- add a minimal test case for PR13577.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161732 91177308-0d34-0410-b5e6-96231b3b80d8
FeatureFastUAMem for Nehalem, Westmere and Sandy Bridge.
FeatureFastUAMem is already on if we pass in nehalem or westmere as a command
argument.
rdar: 7252306
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161717 91177308-0d34-0410-b5e6-96231b3b80d8
- if a boolean test (X86ISD::CMP or X86ISD:SUB) checks a boolean value
generated from X86ISD::SETCC, try to simplify the boolean value
generation and checking by reusing the original EFLAGS with proper
condition code
- add hooks to X86 specific SETCC/BRCOND/CMOV, the major 3 places
consuming EFLAGS
part of patches fixing PR12312
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161687 91177308-0d34-0410-b5e6-96231b3b80d8
When replacing Old with New, it can happen that New is already a
successor. Add the old and new edge weights instead of creating a
duplicate edge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161653 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it possible to speed up def_iterator by stopping at the first
use. This makes def_empty() and getUniqueVRegDef() much faster when
there are many uses.
In a +Asserts build, LiveVariables is 100x faster in one case because
getVRegDef() has an assertion that would scan to the end of a
def_iterator chain.
Spill weight calculation is significantly faster (300x in one case)
because isTriviallyReMaterializable() calls MRI->isConstantPhysReg(%RIP)
which calls def_empty(%RIP).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161634 91177308-0d34-0410-b5e6-96231b3b80d8
Use a more conventional doubly linked list where the Prev pointers form
a cycle. This means it is no longer necessary to adjust the Prev
pointers when reallocating the VRegInfo array.
The test changes are required because the register allocation hint is
using the use-list order to break ties.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161633 91177308-0d34-0410-b5e6-96231b3b80d8
This patch corrects the definition of umlal/smlal instructions and adds support
for matching them to the ARM dag combiner.
Bug 12213
Patch by Yin Ma!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161581 91177308-0d34-0410-b5e6-96231b3b80d8
We perform the following:
1> Use SUB instead of CMP for i8,i16,i32 and i64 in ISel lowering.
2> Modify MachineCSE to correctly handle implicit defs.
3> Convert SUB back to CMP if possible at peephole.
Removed pattern matching of (a>b) ? (a-b):0 and like, since they are handled
by peephole now.
rdar://11873276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161462 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, MBP essentially aligned every branch target it could. This
bloats code quite a bit, especially non-looping code which has no real
reason to prefer aligned branch targets so heavily.
As Andy said in review, it's still a bit odd to do this without a real
cost model, but this at least has much more plausible heuristics.
Fixes PR13265.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161409 91177308-0d34-0410-b5e6-96231b3b80d8
If the result of a common subexpression is used at all uses of the candidate
expression, CSE should not increase the live range of the common subexpression.
rdar://11393714 and rdar://11819721
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161396 91177308-0d34-0410-b5e6-96231b3b80d8
The MFTB instruction itself is being phased out, and its functionality
is provided by MFSPR. According to the ISA docs, using MFSPR works on all known
chips except for the 601 (which did not have a timebase register anyway)
and the POWER3.
Thanks to Adhemerval Zanella for pointing this out!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161346 91177308-0d34-0410-b5e6-96231b3b80d8
On PPC64, this can be done with a simple TableGen pattern.
To enable this, I've added the (otherwise missing) readcyclecounter
SDNode definition to TargetSelectionDAG.td.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161302 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is mostly just refactoring a bunch of copy-and-pasted code, but
it also adds a check that the call instructions are readnone or readonly.
That check was already present for sin, cos, sqrt, log2, and exp2 calls, but
it was missing for the rest of the builtins being handled in this code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161282 91177308-0d34-0410-b5e6-96231b3b80d8
I noticed that SelectionDAGBuilder::visitCall was missing a check for memcmp
in TargetLibraryInfo, so that it would use custom code for memcmp calls even
with -fno-builtin. I also had to add a new -disable-simplify-libcalls option
to llc so that I could write a test for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161262 91177308-0d34-0410-b5e6-96231b3b80d8
Fast isel doesn't currently have support for translating builtin function
calls to target instructions. For embedded environments where the library
functions are not available, this is a matter of correctness and not
just optimization. Most of this patch is just arranging to make the
TargetLibraryInfo available in fast isel. <rdar://problem/12008746>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161232 91177308-0d34-0410-b5e6-96231b3b80d8
Add more comments and use early returns to reduce nesting in isLoadFoldable.
Also disable folding for V_SET0 to avoid introducing a const pool entry and
a const pool load.
rdar://10554090 and rdar://11873276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161207 91177308-0d34-0410-b5e6-96231b3b80d8
- Relax to match even if epilogue (pop %ebp) were emitted.
- Assume the return value is stored to %xmm0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161155 91177308-0d34-0410-b5e6-96231b3b80d8
Machine CSE and other optimizations can remove instructions so folding
is possible at peephole while not possible at ISel.
This patch is a rework of r160919 and was tested on clang self-host on my local
machine.
rdar://10554090 and rdar://11873276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161152 91177308-0d34-0410-b5e6-96231b3b80d8
MipsSEFrameLowering.
Implement MipsSEFrameLowering::hasReservedCallFrame. Call frames will not be
reserved if there is a call with a large call frame or there are variable sized
objects on the stack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161090 91177308-0d34-0410-b5e6-96231b3b80d8
The frame object which points to the dynamically allocated area will not be
needed after changes are made to cease reserving call frames.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161076 91177308-0d34-0410-b5e6-96231b3b80d8
arguments to the stack in MipsISelLowering::LowerCall, use stack pointer and
integer offset operands rather than frame object operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161068 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, we were using EBX, but PIC requires the GOT to be in EBX before
function calls via PLT GOT pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161066 91177308-0d34-0410-b5e6-96231b3b80d8
single-precision load and store.
Also avoid selecting LUXC1 and SUXC1 instructions during isel. It is incorrect
to map unaligned floating point load/store nodes to these instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161063 91177308-0d34-0410-b5e6-96231b3b80d8
One motivating example is to sink an instruction from a basic block which has
two successors: one outside the loop, the other inside the loop. We should try
to sink the instruction outside the loop.
rdar://11980766
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161062 91177308-0d34-0410-b5e6-96231b3b80d8
We are extending live ranges, so kill flags are not accurate. They
aren't needed until they are recomputed after RA anyway.
<rdar://problem/11950722>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161023 91177308-0d34-0410-b5e6-96231b3b80d8
We branch to the successor with higher edge weight first.
Convert from
je LBB4_8 --> to outer loop
jmp LBB4_14 --> to inner loop
to
jne LBB4_14
jmp LBB4_8
PR12750
rdar: 11393714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161018 91177308-0d34-0410-b5e6-96231b3b80d8
Machine CSE and other optimizations can remove instructions so folding
is possible at peephole while not possible at ISel.
rdar://10554090 and rdar://11873276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160919 91177308-0d34-0410-b5e6-96231b3b80d8
It is possible that an instruction can use and update EFLAGS.
When checking the safety, we should check the usage of EFLAGS first before
declaring it is safe to optimize due to the update.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160912 91177308-0d34-0410-b5e6-96231b3b80d8
These idempotent sub-register indices don't do anything --- They simply
map XMM registers to themselves. They no longer affect register classes
either since the SubRegClasses field has been removed from Target.td.
This patch replaces XMM->XMM EXTRACT_SUBREG and INSERT_SUBREG patterns
with COPY_TO_REGCLASS patterns which simply become COPY instructions.
The number of IMPLICIT_DEF instructions before register allocation is
reduced, and that is the cause of the test case changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160816 91177308-0d34-0410-b5e6-96231b3b80d8
TwoAddressInstructionPass.
The generated code for Atom has a different code sequence. This is realted
to commit r160749.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160755 91177308-0d34-0410-b5e6-96231b3b80d8
It is redundant; RegisterCoalescer will do the remat if it can't eliminate
the copy. Collected instruction counts before and after this. A few extra
instructions are generated due to spilling but it is normal to see these kinds
of changes with almost any small codegen change, according to Jakob.
This also fixed rdar://11830760 where xor is expected instead of movi0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160749 91177308-0d34-0410-b5e6-96231b3b80d8
The long branch pass (fixed in r160601) no longer uses the global base register
to compute addresses of branch destinations, so it is not necessary to reserve
a slot on the stack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160703 91177308-0d34-0410-b5e6-96231b3b80d8
struct s {
double x1;
float x2;
};
__attribute__((regparm(3))) struct s f(int a, int b, int c);
void g(void) {
f(41, 42, 43);
}
We need to be able to represent passing the address of s to f (sret) in a
register (inreg). Turns out that all that is needed is to not mark them as
mutually incompatible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160695 91177308-0d34-0410-b5e6-96231b3b80d8
are targeting an ELF platform. Only fold gs-relative (and fs-relative) loads
if it is actually sensible to do so for the target platform.
This fixes PR13438.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160687 91177308-0d34-0410-b5e6-96231b3b80d8
that do not support it (X86 does not lower select_cc).
PR: 13428
Together with Michael Kuperstein <michael.m.kuperstein@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160619 91177308-0d34-0410-b5e6-96231b3b80d8
This pass no longer requires that the global pointer value be saved to the
stack or register since it uses bal instruction to compute branch distance.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160601 91177308-0d34-0410-b5e6-96231b3b80d8
LiveRangeEdit::foldAsLoad() can eliminate a register by folding a load
into its only use. Only do that when the load is safe to move, and it
won't extend any live ranges.
This fixes PR13414.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160575 91177308-0d34-0410-b5e6-96231b3b80d8
PHIElimination splits critical edges when it predicts it can resolve
interference and eliminate copies. It doesn't split the edge if the
interference wouldn't be resolved anyway because the phi-use register is
live in the critical edge anyway.
Teach PHIElimination to split loop exiting edges with interference, even
if it wouldn't resolve the interference. This removes the necessary
copies from the loop, which is still an improvement from injecting the
copies into the loop.
The test case demonstrates the improvement. Before:
LBB0_1:
cmpb $0, (%rdx)
leaq 1(%rdx), %rdx
movl %esi, %eax
je LBB0_1
After:
LBB0_1:
cmpb $0, (%rdx)
leaq 1(%rdx), %rdx
je LBB0_1
movl %esi, %eax
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160571 91177308-0d34-0410-b5e6-96231b3b80d8
Updated OptimizeCompare in peephole to remove redundant cmp against zero.
We only remove Compare if CF and OF are not used.
rdar://11855129
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160454 91177308-0d34-0410-b5e6-96231b3b80d8
when run on an Intel Atom processor. The failures have arisen due
to changes elsewhere in the trunk over the past 8 weeks or so.
These failures were not detected by the Atom buildbot because the
CPU on the Atom buildbot was not being detected as an Atom CPU.
The fix for this problem is in Host.cpp and X86Subtarget.cpp, but
shall remain commented out until the current set of Atom test failures
are fixed.
Patch by Andy Zhang and Tyler Nowicki!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160451 91177308-0d34-0410-b5e6-96231b3b80d8
LiveIntervals due to the two-addr pass generating bogus MI code.
The crux of the issue was a loop nesting problem. The intent of the code
which attempts to transform instructions before converting them to
two-addr form is to defer and reprocess any transformed instructions as
the second processing is likely to have more opportunities to coalesce
copies, etc. Unfortunately, there was one section of processing that was
not deferred -- the INSERT_SUBREG rewriting. Due to quirks of how this
rewriting proceeded, not only did it occur early, it removed the bits of
information needed for the deferred processing to correctly generate the
necessary two address form (specifically inserting a copy), but didn't
trigger any immediate assertions and produced what appeared to be
already valid two-address from code. Thus, the assertion only fired much
later in the pipeline.
The fix is to hoist the transformation logic up layer to where it can
more firmly defer all further processing, and to teach the normal
processing to handle an edge case previously handled as part of the
transformation logic. This edge case (already matched tied register
operands) needs to *not* defer any steps.
As has been brought up repeatedly in the process: wow does this code
need refactoring. I *may* squeeze in some time to at least bring sanity
to this loop... but wow... =]
Thanks to Jakob for helpful hints on the way here, and the review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160443 91177308-0d34-0410-b5e6-96231b3b80d8
Print the high order register of a double word register operand.
In 32 bit mode, a 64 bit double word integer will be represented
by 2 32 bit registers. This modifier causes the high order register
to be used in the asm expression. It is useful if you are using
doubles in assembler and continue to control register to variable
relationships.
This patch also fixes a related bug in a previous patch:
case 'D': // Second part of a double word register operand
case 'L': // Low order register of a double word register operand
case 'M': // High order register of a double word register operand
I got 'D' and 'M' confused. The second part of a double word operand
will only match 'M' for one of the endianesses. I had 'L' and 'D'
be the opposite twins when 'L' and 'M' are.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160429 91177308-0d34-0410-b5e6-96231b3b80d8
intrinsics. The second instruction(s) to be handled are the vector versions
of count set bits (ctpop).
The changes here are to clang so that it generates a target independent
vector ctpop when it sees an ARM dependent vector bits set count. The changes
in llvm are to match the target independent vector ctpop and in
VMCore/AutoUpgrade.cpp to update any existing bc files containing ARM
dependent vector pop counts with target-independent ctpops. There are also
changes to an existing test case in llvm for ARM vector count instructions and
to a test for the bitcode upgrade.
<rdar://problem/11892519>
There is deliberately no test for the change to clang, as so far as I know, no
consensus has been reached regarding how to test neon instructions in clang;
q.v. <rdar://problem/8762292>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160410 91177308-0d34-0410-b5e6-96231b3b80d8
When truncating a result of a vector that is split we need
to use the result of the split vector, and not re-split the dead node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160357 91177308-0d34-0410-b5e6-96231b3b80d8
large immediates. Add dag combine logic to recover in case the large
immediates doesn't fit in cmp immediate operand field.
int foo(unsigned long l) {
return (l>> 47) == 1;
}
we produce
%shr.mask = and i64 %l, -140737488355328
%cmp = icmp eq i64 %shr.mask, 140737488355328
%conv = zext i1 %cmp to i32
ret i32 %conv
which codegens to
movq $0xffff800000000000,%rax
andq %rdi,%rax
movq $0x0000800000000000,%rcx
cmpq %rcx,%rax
sete %al
movzbl %al,%eax
ret
TargetLowering::SimplifySetCC would transform
(X & -256) == 256 -> (X >> 8) == 1
if the immediate fails the isLegalICmpImmediate() test. For x86,
that's immediates which are not a signed 32-bit immediate.
Based on a patch by Eli Friedman.
PR10328
rdar://9758774
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160346 91177308-0d34-0410-b5e6-96231b3b80d8
uint32_t hi(uint64_t res)
{
uint_32t hi = res >> 32;
return !hi;
}
llvm IR looks like this:
define i32 @hi(i64 %res) nounwind uwtable ssp {
entry:
%lnot = icmp ult i64 %res, 4294967296
%lnot.ext = zext i1 %lnot to i32
ret i32 %lnot.ext
}
The optimizer has optimize away the right shift and truncate but the resulting
constant is too large to fit in the 32-bit immediate field. The resulting x86
code is worse as a result:
movabsq $4294967296, %rax ## imm = 0x100000000
cmpq %rax, %rdi
sbbl %eax, %eax
andl $1, %eax
This patch teaches the x86 lowering code to handle ult against a large immediate
with trailing zeros. It will issue a right shift and a truncate followed by
a comparison against a shifted immediate.
shrq $32, %rdi
testl %edi, %edi
sete %al
movzbl %al, %eax
It also handles a ugt comparison against a large immediate with trailing bits
set. i.e. X > 0x0ffffffff -> (X >> 32) >= 1
rdar://11866926
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160312 91177308-0d34-0410-b5e6-96231b3b80d8
In the added testcase the constant 55 was behind an AssertZext of type i1, and ComputeDemandedBits
reported that some of the bits were both known to be one and known to be zero.
Together with Michael Kuperstein <michael.m.kuperstein@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160305 91177308-0d34-0410-b5e6-96231b3b80d8
1. FileCheck-ize epilogue.ll and allow another asm instruction to restore %rsp.
2. Remove check in widen_arith-3.ll that was hitting instruction in epilogue instead of
vector add.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160274 91177308-0d34-0410-b5e6-96231b3b80d8
undef virtual register. The problem is that ProcessImplicitDefs removes the
definition of the register and marks all uses as undef. If we lose the undef
marker then we get a register which has no def, is not marked as undef. The
live interval analysis does not collect information for these virtual
registers and we crash in later passes.
Together with Michael Kuperstein <michael.m.kuperstein@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160260 91177308-0d34-0410-b5e6-96231b3b80d8
It is intended to fix PR11468.
Old prologue and epilogue looked like this:
push %rbp
mov %rsp, %rbp
and $alignment, %rsp
push %r14
push %r15
...
pop %r15
pop %r14
mov %rbp, %rsp
pop %rbp
The problem was to reference the locations of callee-saved registers in exception handling:
locations of callee-saved had to be re-calculated regarding the stack alignment operation. It would
take some effort to implement this in LLVM, as currently MachineLocation can only have the form
"Register + Offset". Funciton prologue and epilogue are now changed to:
push %rbp
mov %rsp, %rbp
push %14
push %15
and $alignment, %rsp
...
lea -$size_of_saved_registers(%rbp), %rsp
pop %r15
pop %r14
pop %rbp
Reviewed by Chad Rosier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160248 91177308-0d34-0410-b5e6-96231b3b80d8
Allow the folding of vbroadcastRR to vbroadcastRM, where the memory operand is a spill slot.
PR12782.
Together with Michael Kuperstein <michael.m.kuperstein@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160230 91177308-0d34-0410-b5e6-96231b3b80d8
intrinsics with target-indepdent intrinsics. The first instruction(s) to be
handled are the vector versions of count leading zeros (ctlz).
The changes here are to clang so that it generates a target independent
vector ctlz when it sees an ARM dependent vector ctlz. The changes in llvm
are to match the target independent vector ctlz and in VMCore/AutoUpgrade.cpp
to update any existing bc files containing ARM dependent vector ctlzs with
target-independent ctlzs. There are also changes to an existing test case in
llvm for ARM vector count instructions and a new test for the bitcode upgrade.
<rdar://problem/11831778>
There is deliberately no test for the change to clang, as so far as I know, no
consensus has been reached regarding how to test neon instructions in clang;
q.v. <rdar://problem/8762292>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160200 91177308-0d34-0410-b5e6-96231b3b80d8
the input vector, it can be bigger (this is helpful for powerpc where <2 x i16>
is a legal vector type but i16 isn't a legal type, IIRC). However this wasn't
being taken into account by ExpandRes_EXTRACT_VECTOR_ELT, causing PR13220.
Lightly tweaked version of a patch by Michael Liao.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160116 91177308-0d34-0410-b5e6-96231b3b80d8
It is safe if CPSR is killed or re-defined.
When we are done with the basic block, check whether CPSR is live-out.
Do not optimize away cmp if CPSR is live-out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160090 91177308-0d34-0410-b5e6-96231b3b80d8
Low order register of a double word register operand. Operands
are defined by the name of the variable they are marked with in
the inline assembler code. This is a way to specify that the
operand just refers to the low order register for that variable.
It is the opposite of modifier 'D' which specifies the high order
register.
Example:
main()
{
long long ll_input = 0x1111222233334444LL;
long long ll_val = 3;
int i_result = 0;
__asm__ __volatile__(
"or %0, %L1, %2"
: "=r" (i_result)
: "r" (ll_input), "r" (ll_val));
}
Which results in:
lui $2, %hi(_gp_disp)
addiu $2, $2, %lo(_gp_disp)
addiu $sp, $sp, -8
addu $2, $2, $25
sw $2, 0($sp)
lui $2, 13107
ori $3, $2, 17476 <-- Low 32 bits of ll_input
lui $2, 4369
ori $4, $2, 8738 <-- High 32 bits of ll_input
addiu $5, $zero, 3 <-- Low 32 bits of ll_val
addiu $2, $zero, 0 <-- High 32 bits of ll_val
#APP
or $3, $4, $5 <-- or i_result, high 32 ll_input, low 32 of ll_val
#NO_APP
addiu $sp, $sp, 8
jr $ra
If not direction is done for the long long for 32 bit variables results
in using the low 32 bits as ll_val shows.
There is an existing bug if 'L' or 'D' is used for the destination register
for 32 bit long longs in that the target value will be updated incorrectly
for the non-specified part unless explicitly set within the inline asm code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160028 91177308-0d34-0410-b5e6-96231b3b80d8
X86. Basically, this is a reapplication of r158087 with a few fixes.
Specifically, (1) the stack pointer is restored from the base pointer before
popping callee-saved registers and (2) in obscure cases (see comments in patch)
we must cache the value of the original stack adjustment in the prologue and
apply it in the epilogue.
rdar://11496434
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160002 91177308-0d34-0410-b5e6-96231b3b80d8
multiple scalars and insert them into a vector. Next, we shuffle the elements
into the correct places, as before.
Also fix a small dagcombine bug in SimplifyBinOpWithSameOpcodeHands, when the
migration of bitcasts happened too late in the SelectionDAG process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159991 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, this would become an integer extension operation, followed by a real integer->float conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159957 91177308-0d34-0410-b5e6-96231b3b80d8
getCondFromSETOpc, getCondFromCMovOpc, getSETFromCond, getCMovFromCond
No functional change intended.
If we want to update the condition code of CMOV|SET|Jcc, we first analyze the
opcode to get the condition code, then update the condition code, finally
synthesize the new opcode form the new condition code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159955 91177308-0d34-0410-b5e6-96231b3b80d8
It is safe if EFLAGS is killed or re-defined.
When we are done with the basic block, check whether EFLAGS is live-out.
Do not optimize away cmp if EFLAGS is live-out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159888 91177308-0d34-0410-b5e6-96231b3b80d8
For each Cmp, we check whether there is an earlier Sub which make Cmp
redundant. We handle the case where SUB operates on the same source operands as
Cmp, including the case where the two source operands are swapped.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159838 91177308-0d34-0410-b5e6-96231b3b80d8
Print the second half of a double word operand.
The include list was cleaned up a bit as well.
Also the test case was modified to test for both
big and little patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159787 91177308-0d34-0410-b5e6-96231b3b80d8
The CopyToReg nodes that set up the argument registers before a call
must be glued to the call instruction. Otherwise, the scheduler may emit
the physreg copies long before the call, causing long live ranges for
the fixed registers.
Besides disabling good register allocation, that can also expose
problems when EmitInstrWithCustomInserter() splits a basic block during
the live range of a physreg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159721 91177308-0d34-0410-b5e6-96231b3b80d8
Implement the TII hooks needed by EarlyIfConversion to create cmov
instructions and estimate their latency.
Early if-conversion is still not enabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159695 91177308-0d34-0410-b5e6-96231b3b80d8
inlineasm-cnstrnt-bad-r-1.ll is NOT supposed to fail, so it was removed. This resulted in the removal of a negative test (inlineasm-cnstrnt-bad-r-1.ll)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159625 91177308-0d34-0410-b5e6-96231b3b80d8
inlineasm-cnstrnt-bad-r-1.ll is NOT supposed to fail, so it was removed. This resulted in the removal of a negative test (inlineasm-cnstrnt-bad-r-1.ll)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159610 91177308-0d34-0410-b5e6-96231b3b80d8
This is still a work in progress but I believe it is currently good enough
to fix PR13122 "Need unit test driver for codegen IR passes". For example,
you can run llc with -stop-after=loop-reduce to have it dump out the IR after
running LSR. Serializing machine-level IR is not yet supported but we have
some patches in progress for that.
The plan is to serialize the IR to a YAML file, containing separate sections
for the LLVM IR, machine-level IR, and whatever other info is needed. Chad
suggested that we stash the stop-after pass in the YAML file and use that
instead of the start-after option to figure out where to restart the
compilation. I think that's a great idea, but since it's not implemented yet
I put the -start-after option into this patch for testing purposes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159570 91177308-0d34-0410-b5e6-96231b3b80d8
another mechanical change accomplished though the power of terrible Perl
scripts.
I have manually switched some "s to 's to make escaping simpler.
While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.
Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159547 91177308-0d34-0410-b5e6-96231b3b80d8
versions of Bash. In addition, I can back out the change to the lit
built-in shell test runner to support this.
This should fix the majority of fallout on Darwin, but I suspect there
will be a few straggling issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159544 91177308-0d34-0410-b5e6-96231b3b80d8
through my perl nets.
With this, the test suite passes even if I force it to run with the
built-in shell test logic, except for a test which REQUIREs shell.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159529 91177308-0d34-0410-b5e6-96231b3b80d8
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
use FileCheck.
Aside from removing a dependence on TCL-style quoting, this also makes
the tests ... significantly more robust. =] It would be really, *really*
great of the maintainer(s) of the CellSPU backend went through and
systematically rewrite these tests to use FileCheck. There are a lot
more that have nearly this bad of abuses.
Another step along the path to a TclTest-free testsuite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159523 91177308-0d34-0410-b5e6-96231b3b80d8
implicit_def, the other instruction can be anything, including instructions
that define multiple values. Be careful about that and don't assume what operand
0 is.
Fixes pr13249.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159509 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch in pic 32 bit code we would add the global base register
and not load from that address. This is a really old bug, but before the
introduction of the tls attributes we would never select initial exec for
pic code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159409 91177308-0d34-0410-b5e6-96231b3b80d8
Corrected type for index of llvm.x86.avx2.gather.d.pd.256
from 256-bit to 128-bit.
Corrected types for src|dst|mask of llvm.x86.avx2.gather.q.ps.256
from 256-bit to 128-bit.
Support the following intrinsics:
llvm.x86.avx2.gather.d.q, llvm.x86.avx2.gather.q.q
llvm.x86.avx2.gather.d.q.256, llvm.x86.avx2.gather.q.q.256
llvm.x86.avx2.gather.d.d, llvm.x86.avx2.gather.q.d
llvm.x86.avx2.gather.d.d.256, llvm.x86.avx2.gather.q.d.256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159402 91177308-0d34-0410-b5e6-96231b3b80d8
up to r158925 were handled as processor specific. Making them
generic and putting tests for these modifiers in the CodeGen/Generic
directory caused a number of targets to fail.
This commit addresses that problem by having the targets call
the generic routine for generic modifiers that they don't currently
have explicit code for.
For now only generic print operands 'c' and 'n' are supported.vi
Affected files:
test/CodeGen/Generic/asm-large-immediate.ll
lib/Target/PowerPC/PPCAsmPrinter.cpp
lib/Target/NVPTX/NVPTXAsmPrinter.cpp
lib/Target/ARM/ARMAsmPrinter.cpp
lib/Target/XCore/XCoreAsmPrinter.cpp
lib/Target/X86/X86AsmPrinter.cpp
lib/Target/Hexagon/HexagonAsmPrinter.cpp
lib/Target/CellSPU/SPUAsmPrinter.cpp
lib/Target/Sparc/SparcAsmPrinter.cpp
lib/Target/MBlaze/MBlazeAsmPrinter.cpp
lib/Target/Mips/MipsAsmPrinter.cpp
MSP430 isn't represented because it did not even run with
the long existing 'c' modifier and it was not apparent what
needs to be done to get it inline asm ready.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159203 91177308-0d34-0410-b5e6-96231b3b80d8
The primary advantage is that loop optimizations will be applied in a
stable order. This helps debugging and unit test creation. It is also
a better overall implementation without pathologically bad performance
on deep functions.
On large functions (llvm-stress --size=200000 | opt -loops)
Before: 0.1263s
After: 0.0225s
On deep functions (after tweaking llvm-stress, thanks Nadav):
Before: 0.2281s
After: 0.0227s
See r158790 for more comments.
The loop tree is now consistently generated in forward order, but loop
passes are applied in reverse order over the program. If we have a
loop optimization that prefers forward order, that can easily be
achieved by adding a different type of LoopPassManager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159183 91177308-0d34-0410-b5e6-96231b3b80d8
More condition codes are included when deciding whether to remove cmp after
a sub instruction. Specifically, we extend from GE|LT|GT|LE to
GE|LT|GT|LE|HS|LS|HI|LO|EQ|NE. If we have "sub a, b; cmp b, a; movhs", we
should be able to replace with "sub a, b; movls".
rdar: 11725965
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159166 91177308-0d34-0410-b5e6-96231b3b80d8
Verify that all paths from the entry block to a virtual register read
pass through a def. Enable this check even when MRI->isSSA() is false.
Verify that the live range of a virtual register is live out of all
predecessor blocks, even for PHI-values.
This requires that PHIElimination sometimes inserts IMPLICIT_DEF
instruction in predecessor blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159150 91177308-0d34-0410-b5e6-96231b3b80d8
Implicitly defined virtual registers can simply have the <undef> bit set
on all uses, and copies can be turned into implicit defs recursively.
Physical registers are a bit trickier. We handle the common case where a
physreg def is used by a nearby instruction in the same basic block. For
more complicated cases, just leave the IMPLICIT_DEF instruction in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159149 91177308-0d34-0410-b5e6-96231b3b80d8
The function live-out registers must be live at all function returns,
and %RCX is only used by eh.return. When a function also has a normal
return, only %RAX holds a return value.
This fixes PR13188.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159116 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the user/front-end to specify a model that is better
than what LLVM would choose by default. For example, a variable
might be declared as
@x = thread_local(initialexec) global i32 42
if it will not be used in a shared library that is dlopen'ed.
If the specified model isn't supported by the target, or if LLVM can
make a better choice, a different model may be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159077 91177308-0d34-0410-b5e6-96231b3b80d8
There are patterns to handle immediates when they fit in the immediate field.
e.g. %sub = add i32 %x, -123
=> sub r0, r0, #123
Add patterns to catch immediates that do not fit but should be materialized
with a single movw instruction rather than movw + movt pair.
e.g. %sub = add i32 %x, -65535
=> movw r1, #65535
sub r0, r0, r1
rdar://11726136
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159057 91177308-0d34-0410-b5e6-96231b3b80d8
The code in X86TargetLowering::LowerEH_RETURN() assumes that a frame
pointer exists, but the frame pointer was forced by the presence of
llvm.eh.unwind.init which isn't guaranteed.
If llvm.eh.unwind.init is actually required in functions calling
eh.return (is it?), we should diagnose that instead of emitting bad
machine code.
This should fix the dragonegg-x86_64-linux-gcc-4.6-test bot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158961 91177308-0d34-0410-b5e6-96231b3b80d8
Minor drive by fix to cleanup latency computation. Calling
getOperandLatency with a deliberately incorrect operand index does not
give you the latency you want.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158959 91177308-0d34-0410-b5e6-96231b3b80d8
boolean flag to an enum: { Fast, Standard, Strict } (default = Standard).
This option controls the creation by optimizations of fused FP ops that store
intermediate results in higher precision than IEEE allows (E.g. FMAs). The
behavior of this option is intended to match the behaviour specified by a
soon-to-be-introduced frontend flag: '-ffuse-fp-ops'.
Fast mode - allows formation of fused FP ops whenever they're profitable.
Standard mode - allow fusion only for 'blessed' FP ops. At present the only
blessed op is the fmuladd intrinsic. In the future more blessed ops may be
added.
Strict mode - allow fusion only if/when it can be proven that the excess
precision won't effect the result.
Note: This option only controls formation of fused ops by the optimizers. Fused
operations that are explicitly requested (e.g. FMA via the llvm.fma.* intrinsic)
will always be honored, regardless of the value of this option.
Internally TargetOptions::AllowExcessFPPrecision has been replaced by
TargetOptions::AllowFPOpFusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158956 91177308-0d34-0410-b5e6-96231b3b80d8
