Avoid a fall-through in the (stubby) treatment of the longjmp intrinsic
call which causes llc & lli to core-dump.
Add a sort-of treatment of cast double to ulong. I am not really sure
what a user should expect to see upon casting a negative FP value to
unsigned long long. But with what is given here, I was able to write
a program that could cast -123.456 to ulong and back and get -123.0,
which seems like a step in the right direction. GCC seems to give you
0. I don't know if I'd consider that useful.
These cases were coming up in GNU coreutils-5.0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7205 91177308-0d34-0410-b5e6-96231b3b80d8
now works in instructions which require a 2-bit or 3-bit INTcc code.
Incidentally, that means that the representation of INTcc registers is now the
same in both integer and FP instructions. Thus, code became much simpler and
cleaner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7185 91177308-0d34-0410-b5e6-96231b3b80d8
allow, i.e. make a sequence of instructions to enable an indirect call using
jump-and-link and 2 temporary registers (which we save and ultimately restore).
Warning: if the delay slot of a function call is used to do meaningful work and
not just a NOP, this behavior is incorrect. However, the Sparc backend does not
yet utilize the delay slots effectively, so it is not necessary to make an
overly complicated algorithm for something that's not used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7178 91177308-0d34-0410-b5e6-96231b3b80d8
* FP double registers are now coded correctly
* Removed function which converted registers based on register types, it was
broken (because regTypes are broken)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7175 91177308-0d34-0410-b5e6-96231b3b80d8
out the entire llvm disassembly for the function at global constant-output
time, which caused the assembler to barf in 164.gzip. This fixes that
particular problem (though 164.gzip has other problems with X86 llc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7168 91177308-0d34-0410-b5e6-96231b3b80d8
Fhourstones, McCat-vor, and many others...)
Printer.cpp: Print implicit uses for AddRegFrm instructions. Break gas
bug workarounds up into separate stanzas of code for each bug. Add new
workarounds for fild and fistp.
X86InstrInfo.def: Add O_ST0 implicit uses for more FP instrs where they
obviously apply. Also add PrintImplUses flags for FP instrs where they
are necessary for gas to understand the output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7165 91177308-0d34-0410-b5e6-96231b3b80d8
(1) Cannot use ANDN(ot), ORN, and XORN for boolean ops, only bitwise ops.
(2) Conditional move instructions must distinguish signed and unsigned
condition codes, e.g., MOVLE vs. MOVLEU.
(3) Conditional-move-on-register was using the cond-move-on-cc opcodes,
which produces a valid-looking instruction with bogus registers!
(4) Here's a really cute one: dividing-by-2^k for negative numbers needs to
add 2^k-1 before shifting, not add 1 after shifting. Sadly, these
are the same when k=0 so our poor test case worked fine.
(5) Casting between signed and unsigned values was not correct:
completely reimplemented.
(6) Zero-extension on unsigned values was bogus: I was only doing the
SRL and not the SLLX before it. Don't know WHAT I was thinking!
(7) And the most important class of changes: Sign-extensions on signed values.
Signed values are not sign-extended after ordinary operations,
so they must be sign-extended before the following cases:
-- passing to an external or unknown function
-- returning from a function
-- using as operand 2 of DIV or REM
-- using as either operand of condition-code setting operation
(currently only SUBCC), with smaller than 32-bit operands
Also, a couple of improvements:
(1) Fold cast-to-bool into Not(bool). Need to do this for And, Or, XOR also.
(2) Convert SetCC-Const into a conditional-move-on-register (case 41)
if the constant is 0. This was only being done for branch-on-SetCC-Const
when the branch is folded with the SetCC-Const.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7159 91177308-0d34-0410-b5e6-96231b3b80d8
(1) An int CC live range must be spilled if there are any interferences,
even if no other "neighbour" in the interf. graph has been allocated
that reg. yet. This is actually true of any class with only one reg!
(2) SparcIntCCRegClass::colorIGNode sets the color even if the LR must
be spilled so that the machine-independent spill code doesn't have to
make the machine-dependent decision of which CC name to use based on
operand type: %xcc or %icc. (These are two halves of the same
register.)
(3) LR->isMarkedForSpill() is no longer the same as LR->hasColor().
These should never have been the same, and this is necessary now for #2.
(4) All RDCCR and WRCCR instructions are directly generated with the
phony number for %ccr so that EmitAssembly/EmitBinary doesn't have to
deal with this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7152 91177308-0d34-0410-b5e6-96231b3b80d8
(1) An int CC live range must be spilled if there are any interferences,
even if no other "neighbour" in the interf. graph has been allocated
that reg. yet. This is actually true of any class with only one reg!
(2) SparcIntCCRegClass::colorIGNode sets the color even if the LR must
be spilled so that the machine-independent spill code doesn't have to
make the machine-dependent decision of which CC name to use based on
operand type: %xcc or %icc. (These are two halves of the same register.)
(3) LR->isMarkedForSpill() is no longer the same as LR->hasColor().
These should never have been the same, and this is necessary now for #2.
(4) All RDCCR and WRCCR instructions are directly generated with the
phony number for %ccr so that EmitAssembly/EmitBinary doesn't have to
deal with this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7151 91177308-0d34-0410-b5e6-96231b3b80d8
integer overflow):
We need to use %icc and not %xcc for comparisons on 32-bit or smaller
integer values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7111 91177308-0d34-0410-b5e6-96231b3b80d8
correct: empirically, "regType" is wrong for a number of registers. Thus, one
can only rely on the "regClass" to figure out what kind of register one is
dealing with.
This change switches to using only "regClass" and adds a few extra DEBUG() print
statements and a few clean-ups in comments and code, mostly minor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7103 91177308-0d34-0410-b5e6-96231b3b80d8
the TableGen descriptions; all unset bits are thus errors.
* As a result, found and fixed instructions where some operands were not
actually assigned into the right portion of the instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7074 91177308-0d34-0410-b5e6-96231b3b80d8
area to avoid using up precious stack space within the 4095 offset limit
from %fp. Such objects that would themselves live at a large offset
were being put there already so this is a simple change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7066 91177308-0d34-0410-b5e6-96231b3b80d8
deletes it, but we were merrily trying to fix the operands of that
instruction anyway! Instead, fix the replacement instruction.
(2) An Improvement: Check for and extract global values in all operands,
not just in known pointer operands. For example, they can occur in
call arguments, and probably other unforeseeable places as well.
This also eliminates the special-case handling of Load and Store.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7053 91177308-0d34-0410-b5e6-96231b3b80d8
not just an Instruction*, at least in one unfortunate case:
the first operand to the va_arg instruction.
Modify ValueToDefVecMap to map from Value*, not Instruction*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7052 91177308-0d34-0410-b5e6-96231b3b80d8
(1) select: Ok to convert a pointer to a float or double.
(2) regalloc: Some MachineInstr* for caller-saving code before a call
were being inserted before and after the call!
(3) Don't insert the caller-saving instructions in the
MachineCodeForInstruction for the Call instruction.
*All* instructions generated by register allocation need to be
recorded in those maps, but it needs to be done uniformly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7051 91177308-0d34-0410-b5e6-96231b3b80d8
SingleSource except oopack and Oscar. (Sorry, Oscar.)
include/llvm/Target/TargetInstrInfo.h: Remove virtual print method. Add
accessors for ImplicitUses/Defs.
lib/Target/TargetInstrInfo.cpp: Remove virtual print method. If you
really wanted this, just use MI->print(O, TM); instead...
lib/Target/X86:
FloatingPoint.cpp: ...like this.
X86InstrInfo.h: Remove virtual print method. Define the PrintImplUses
target-specific flag bit.
X86InstrInfo.def: Add the PrintImplUses flag to all the instructions
which implicitly use CL, because the assembler needs to see the CL in
order to generate the right instruction.
Printer.cpp: Ditch fnIndex at Chris's request. Now we use CurrentFnName
to name constants in the constant pool for each function instead. This
avoids keeping state between runOnMachineFunction() invocations, which
is a no-no. Having MangledGlobals be global is a bogon I'd like to get
rid of too, but making it a static member of Printer causes link errors
(why???).
Make NumberForBB into a member of Printer instead of a global, too.
Make printOp and printMemReference into methods of Printer.
X86InstrInfo::print is now Printer::printMachineInstruction, because
TargetInstrInfo::print is history. (Because of this, we have to qualify
the names of some TargetInstrInfo methods we call.)
Print out the ImplicitUses field of any instruction we print that has
the PrintImplUses bit set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6924 91177308-0d34-0410-b5e6-96231b3b80d8
particular, name mangling for GlobalValues only occurs when the linkage type is
internal or when the name must be mangled to avoid a collision. See comments in
CWriter::getValueName for more information.
- 'inline' keyword is now emitted for functions with 'linkonce' linkage type.
- Fixed typos.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6898 91177308-0d34-0410-b5e6-96231b3b80d8
involves removing the [bwl] suffixes from instruction names, as well
as some other distinguishing marks (32/64/80 on fp insns, _i suffixes, etc.)
Lowercase all instr. names as well for consistency's sake.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6790 91177308-0d34-0410-b5e6-96231b3b80d8
to print various things on a module-by-module basis (currently, only the
former is used).
Don't print < > around names. The assembler can't take it.
Print pseudoinstructions only as comments. The poor little assembler can't
take that, either.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6789 91177308-0d34-0410-b5e6-96231b3b80d8
Move LowerAllocations, PrintFunction, and SymbolStripping passes, and
the corresponding -disable-strip and -d options, over here to the SPARC
target-specific bits of llc. Rename -d to -dump-asm.
tools/llc/Makefile:
Reindent. Add x86 library so that llc compiles again.
tools/llc/llc.cpp:
Remove support for running arbitrary optimization passes. Use opt instead.
Remove LowerAllocations, PrintFunction, and SymbolStripping passes, as noted
above.
Allow user to select a backend (x86 or SPARC); default to guessing from
the endianness/pointer size of the input bytecode file.
Fix typos.
Delete empty .s file and exit with error status if target does not support
static compilation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6776 91177308-0d34-0410-b5e6-96231b3b80d8
into a new function FPCSafeToPrint(), and use it in printConstant()
and printFunction() to decide whether we should output ConstantFPs as
floating-point constants or as references to stack-allocated variables.
lib/VMCore/AsmWriter.cpp: Fix an apparent typo in the code mentioned above.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6762 91177308-0d34-0410-b5e6-96231b3b80d8
instead of a variable pointer and an alloca. All accesses to the variable then
use the address-of operator to access it. This plays better with the internal
GCC code generation phases, which bail early on functions which contain allocas.
It also makes the code a bit easier to read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6734 91177308-0d34-0410-b5e6-96231b3b80d8
SETTING the operand to be an immediate or have verified that one of the operands
is really a SignExtended or Unextended immediate value already, which warrants
an 'i' opcode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6662 91177308-0d34-0410-b5e6-96231b3b80d8
* BPA and BPN do not take a %cc register as a parameter
* SLL/SRL/SRA{r,i}5 are there for a reason - they are ONLY 32-bit instructions
* Likewise, SLL/SRL/SRAX{r,i}6 are only 64-bit
* Added WRCCR{r,i} opcodes
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6655 91177308-0d34-0410-b5e6-96231b3b80d8
* Removed instruction scheduling as it is too slow to run in a JIT environment
* Removed other passes because they aren't necessary and can slow JIT down
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6652 91177308-0d34-0410-b5e6-96231b3b80d8
This avoid generating a register to hold C, which in turn speeds up the
register allocator by a lot: ~9% on 164.gzip and ~17% on 256.bzip2. This
also speeds up other passes. This also speeds up execution of the program
marginally, and makes the asm much easier to read. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6626 91177308-0d34-0410-b5e6-96231b3b80d8
Special cases: STFSRx and STXFSRx - they operate on predefined rd=0 or rd=1, and
expect %fsr as the parameter in assembly. They are disabled (since not used)
until an encoding, both for code generation and output, is chosen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6619 91177308-0d34-0410-b5e6-96231b3b80d8
Update file comment to contain a bunch of the overview mapping-info
documentation previously buried within the file.
Remove some unnecessary include/using stmts.
Rename pass to MappingInfoCollector.
Rewrite a lot of it so it doesn't use global instance variables and so
it outputs into MappingInfo objects and then dumps those out, instead of going
straight to an assembly file.
Change name of factory to getMappingInfoCollector.
Fold prologue & epilogue writers into MappingInfo methods.
lib/Target/Sparc/FInfo.cpp:
Correct file comment to reflect above change
lib/Target/Sparc/Sparc.cpp:
Change name of factory to getMappingInfoCollector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6617 91177308-0d34-0410-b5e6-96231b3b80d8
in Emitter.cpp, just convert the Sparc version of the constant pool into
what's already supported and inter-operate.
* Implemented a first pass at lazy function resolution in the JITResolver. That
required adding a SparcV9CodeEmitter pointer to simplify generating
bit-patterns of the instructions.
* SparcV9CodeEmitter now creates and destroys static TheJITResolver, which makes
sense because the SparcV9CodeEmitter is the only user of TheJITResolver, and
lives for the entire duration of the JIT (via PassManager which lives in VM).
* Changed all return values in the JITResolver to uint64_t because of the 64-bit
Sparc architecture.
* Added a new version of getting the value of a GlobalValue in the
SparcV9CodeEmitter, which now works for already-generated functions (JITted or
library functions).
* Removed little-used and unused functions, cleaning up the internal view of the
SparcV9CodeEmitter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6612 91177308-0d34-0410-b5e6-96231b3b80d8
the loop, and in both cases. In the first case, it is a VReg that is a constant
so it may be actually converted to a constant. In the second case, it is already
a constant, but then if it doesn't change its type (e.g. to become a register
and have the value loaded from memory if it is too large to live in its
instruction field), we must change the opcode BEFORE the 'continue', otherwise
we miss the opportunity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6602 91177308-0d34-0410-b5e6-96231b3b80d8
rewriting it. I also vacuumed out all the commented-out code and
inaccurate comments, etc.
(We need to put the mapping information in a data structure so that we can
pass it out to the JIT, instead of automagically converting it to .byte
directives.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6574 91177308-0d34-0410-b5e6-96231b3b80d8
they prefer the destination register to be last. Thus, two new classes were made
for them that accomodate for having this layout of operands (F3_1rd, F3_2rd).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6564 91177308-0d34-0410-b5e6-96231b3b80d8
* Labeled sections that are not currently used in the Sparc backend as not
requiring completion at this time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6562 91177308-0d34-0410-b5e6-96231b3b80d8
* Added instruction classes which start building from rs1, then rs2, and rd.
* Fixed order of operands in classes 4.1 and 4.2; added 4.6 .
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6561 91177308-0d34-0410-b5e6-96231b3b80d8
* Added new classes which start building from rs1, adding rs2, and then rd.
* Fixed order of operands in classes 3.11, 3.12, 3.16, and 3.17 .
* Fixed comments to reflect Real Life (tm).
* Removed "don't care" commented out assignments and dead classes (#if 0).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6560 91177308-0d34-0410-b5e6-96231b3b80d8
In particular these classes are the last that link the noncopyable classes
with the hash_map, vector, and list classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6552 91177308-0d34-0410-b5e6-96231b3b80d8
None of these instructions are actually used in the Sparc backend, so no changes
were required in the instruction selector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6549 91177308-0d34-0410-b5e6-96231b3b80d8
SparcInstrSelection.cpp:
* Fixed opcodes to return correct 'i' version since the two functions are each
only used in one place.
* Changed name of function to have an 'i' in the name to signify that they each
return an immediate form of the opcode.
* Added a warning if either of the functions is ever used in a context which
requires a register-version opcode.
SparcV9_F4.td: fixed class F4_3, added F4_4 and notes that F4_{1,2} need fixing
SparcV9.td: added the MOV(F)cc instructions
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6548 91177308-0d34-0410-b5e6-96231b3b80d8
TmpInstruction constructors because every TmpInstruction object has
to be registered with a MachineCodeForInstruction to prevent leaks.
This simplifies the user's code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6469 91177308-0d34-0410-b5e6-96231b3b80d8
preallocated. While reg-to-reg dependences were already handled, this
change required new code for adding edges to/from call instructions.
This was part of the extensive changes to the way code generation occurs
for function call arguments and return values.
See log for CodeGen/PhyRegAlloc.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6467 91177308-0d34-0410-b5e6-96231b3b80d8
globals in some other places may not have been pulled out either;
globals in phi operands were being put just before the phi instead of
in the predecessor basic blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6466 91177308-0d34-0410-b5e6-96231b3b80d8
call arguments and return values:
Now all copy operations before and after a call are generated during
selection instead of during register allocation.
The values are copied to virtual registers (or to the stack), but
in the former case these operands are marked with the correct physical
registers according to the calling convention.
Although this complicates scheduling and does not work well with
live range analysis, it simplifies the machine-dependent part of
register allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6465 91177308-0d34-0410-b5e6-96231b3b80d8
* ability to save BasicBlock references to be resolved later
* register remappings from the enum values to the real hardware numbers
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6449 91177308-0d34-0410-b5e6-96231b3b80d8
instructions of format 3.12 and 3.13 cannot inherit from F3rdrs1, because that
implies that the two registers are the first two parameters to the instruction.
Thus I made the instructions inherit from F3rd again, and manually added an rs1
field AFTER the shcnt field in the instruction, which maps to the appropriate
place in the instruction.
The other changes are just elimination of unnecessary spaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6437 91177308-0d34-0410-b5e6-96231b3b80d8
SparcV9_F3.td: F3_12 and F3_13 instructions have rd and rs1 fields. Also,
their fields were totally screwed up. This seems to fix the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6429 91177308-0d34-0410-b5e6-96231b3b80d8
exit code. This, in turn, makes an empty file SparcV9CodeEmitter.inc, and only
much later, produces a link error because the key function that TableGen creates
isn't found.
Using a temporary file in the middle forces a good .INC file to be generated by
TableGen, and it will keep trying until you fix the input file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6392 91177308-0d34-0410-b5e6-96231b3b80d8
* Added some Format 4 classes, but not instructions
* Added notes on missing sections with FIXMEs
* Added RDCCR instr
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6388 91177308-0d34-0410-b5e6-96231b3b80d8
list (rd, rs1, imm), in that order (bit-wise), the actual assembly syntax is
instr rd, imm, rs1, and that is how they are constructed in the instruction
selector. This fixes the discrepancy.
Also fixed some comments along the same lines and fixed page numbers referring
to where instructions are described in the Sparc manual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6384 91177308-0d34-0410-b5e6-96231b3b80d8
Non-obvious change: since I have changed ST and STD to be STF and STDF to
(a) closer resemble their name (NOT assembly text) in the Sparc manual, and
(b) clearly specify that they they are floating-point opcodes,
I made the same changes in this file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6376 91177308-0d34-0410-b5e6-96231b3b80d8
Here I had to make one non-trivial change: add a function to get a version of
the opcode that takes an immediate, given an opcode that takes all registers.
This is required because sometimes it is not known at construction time which
opcode is used because opcodes are passed around between functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6375 91177308-0d34-0410-b5e6-96231b3b80d8
annotations on instructions to specify which format they are (i.e., do they take
2 registers and 1 immediate or just 3 registers) as that changes their binary
representation and hence, code emission.
This makes instructions more like how X86 defines them to be. Now, writers of
instruction selection must choose the correct opcode based on what instruction
type they are building, which they already know. Thus, the JIT doesn't have to
do the same work by `discovering' which operands an instruction really has.
As this involves lots of small changes to a lot of files in lib/target/Sparc,
I'll commit them individually because otherwise the diffs will be unreadable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6371 91177308-0d34-0410-b5e6-96231b3b80d8
a default value is set in the header file.
* Fixed some code layout to make it more consistent with the rest of codebase
* Added addPassesToJITCompile() with relevant passes
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6369 91177308-0d34-0410-b5e6-96231b3b80d8
Also, added annotations to how instructions are modified (reg/imm operands).
Added prototype for adding register numbers to values pass for interfacing with
the target-independent register allocators in the JIT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6366 91177308-0d34-0410-b5e6-96231b3b80d8
that assembles instructions is generated via TableGen (and hence must be built
before building this directory, but that's already the case in the top-level
Makefile).
Also added is .cvsignore to ignore the generated file `SparcV9CodeEmitter.inc',
which is included by SparcV9CodeEmitter.cpp .
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6357 91177308-0d34-0410-b5e6-96231b3b80d8
and related functions and flags. Fixed several bugs where only
"isDef" was being checked, not "isDefAndUse".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6342 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed spilling of %fcc[0-3] which are part of %fsr.
(2) Moved some machine-independent reg-class code to class TargetRegInfo
from SparcReg{Class,}Info.
(3) Renamed MachienOperand::opIsDef to MachineOperand::opIsDefOnly()
and related functions and flags. Fixed several bugs where only
"isDef" was being checked, not "isDefAndUse".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6341 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed spilling of %fcc[0-3] which are part of %fsr.
Moved some machine-independent reg-class code to class TargetRegInfo
from SparcReg{Class,}Info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6339 91177308-0d34-0410-b5e6-96231b3b80d8
consistent with the style of LLVM's code base (and itself! it's inconsistent in
some places.)
No functional changes were made.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6265 91177308-0d34-0410-b5e6-96231b3b80d8
consistent with the style of LLVM's code base (and itself! it's inconsistent in
some places.)
No functional changes were made.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@6262 91177308-0d34-0410-b5e6-96231b3b80d8
