It was incorrectly checking a Function* being an IntrinsicInst* which
isn't possible. It should always have been checking the CallInst* instead.
Added test case for x86 which ensures we only get one constant load.
It was 2 before this change.
rdar://problem/13267920
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175853 91177308-0d34-0410-b5e6-96231b3b80d8
to lib/DebugInfo, with dumping in llvm-dwarfdump. This patch adds
initial ability to parse and dump CFA instructions contained in
entries.
To keep it manageable, the patch omits some more advanced capabilities
(accounted in TODOs):
* Parsing of instructions with BLOCK arguments (expression lists)
* Dumping of actual instruction arguments (currently only names are
dumped). This is quite tricky since the dumper has to effectively
"interpret" the instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175820 91177308-0d34-0410-b5e6-96231b3b80d8
Storing the load/store instructions with the values
and inspect them using Alias Analysis to make sure
they don't alias, since the GEP pointer operand doesn't
take the offset into account.
Trying hard to not add any extra cost to loads and stores
that don't overlap on global values, AA is *only* calculated
if all of the previous attempts failed.
Using biggest vector register size as the stride for the
vectorization access, as we're being conservative and
the cost model (which calculates the real vectorization
factor) is only run after the legalization phase.
We might re-think this relationship in the future, but
for now, I'd rather be safe than sorry.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175818 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes some problems with too conservative checking where we were
marking all aliases of a register as used, and then also checking all
aliases when allocating a register.
<rdar://problem/13249625>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175782 91177308-0d34-0410-b5e6-96231b3b80d8
Large code model is identical to medium code model except that the
addis/addi sequence for "local" accesses is never used. All accesses
use the addis/ld sequence.
The coding changes are straightforward; most of the patch is taken up
with creating variants of the medium model tests for large model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175767 91177308-0d34-0410-b5e6-96231b3b80d8
A legal BUILD_VECTOR goes in and gets constant folded into another legal
BUILD_VECTOR so we don't lose any legality here. The problematic PPC
optimization that made this check necessary was fixed recently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175759 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes for-loop.cl piglit test
Patch By: Vincent Lejeune
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
NOTE: This is a candidate for the Mesa stable branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175742 91177308-0d34-0410-b5e6-96231b3b80d8
NOTE: This is a candidate for the Mesa stable branch.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175733 91177308-0d34-0410-b5e6-96231b3b80d8
there were inline br .+4 instructions. Soon everything can enjoy the
full instruction scheduling experience.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175718 91177308-0d34-0410-b5e6-96231b3b80d8
The constructs %hi() and %lo() represent the high and low 16
bits of the address.
Because the 16 bit offset field of an LW instruction is
interpreted as signed, if bit 15 of the low part is 1 then the
low part will act as a negative and 1 needs to be added to the
high part.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175707 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the PPCDAGToDAGISel::PostprocessISelDAG virtual
method to perform post-selection peephole optimizations on the DAG
representation.
One optimization is implemented here: folds to clean up complex
addressing expressions for thread-local storage and medium code
model. It will also be useful for large code model sequences when
those are added later. I originally thought about doing this on the
MI representation prior to register assignment, but it's difficult to
do effective global dead code elimination at that point. DCE is
trivial on the DAG representation.
A typical example of a candidate code sequence in assembly:
addis 3, 2, globalvar@toc@ha
addi 3, 3, globalvar@toc@l
lwz 5, 0(3)
When the final instruction is a load or store with an immediate offset
of zero, the offset from the add-immediate can replace the zero,
provided the relocation information is carried along:
addis 3, 2, globalvar@toc@ha
lwz 5, globalvar@toc@l(3)
Since the addi can in general have multiple uses, we need to only
delete the instruction when the last use is removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175697 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips specific standalone assembler directive "set at".
This directive changes the general purpose register
that the assembler will use when given the symbolic
register name $at.
This does not include negative testing. That will come
in a future patch.
A side affect of this patch recognizes the different
GPR register names for temporaries between old abi
and new abi so a test case for that is included.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175686 91177308-0d34-0410-b5e6-96231b3b80d8
(2xi32) (truncate ((2xi64) bitcast (buildvector i32 a, i32 x, i32 b, i32 y)))
can be folded into a (2xi32) (buildvector i32 a, i32 b).
Such a DAG would cause uneccessary vdup instructions followed by vmovn
instructions.
We generate this code on ARM NEON for a setcc olt, 2xf64, 2xf64. For example, in
the vectorized version of the code below.
double A[N];
double B[N];
void test_double_compare_to_double() {
int i;
for(i=0;i<N;i++)
A[i] = (double)(A[i] < B[i]);
}
radar://13191881
Fixes bug 15283.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175670 91177308-0d34-0410-b5e6-96231b3b80d8
This handles the cases where the 6-bit splat element is odd, converting
to a three-instruction sequence to add or subtract two splats. With this
fix, the XFAIL in test/CodeGen/PowerPC/vec_constants.ll is removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175663 91177308-0d34-0410-b5e6-96231b3b80d8
- When extloading from a vector with non-byte-addressable element, e.g.
<4 x i1>, the current logic breaks. Extend the current logic to
fix the case where the element type is not byte-addressable by loading
all bytes, bit-extracting/packing each element.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175642 91177308-0d34-0410-b5e6-96231b3b80d8
The PPC backend doesn't handle these correctly. This patch uses logic
similar to that in the X86 and ARM backends to track these arguments
properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175635 91177308-0d34-0410-b5e6-96231b3b80d8
Add HexagonMCInst class which adds various Hexagon VLIW annotations.
In addition, this class also includes some APIs related to the
constant extenders.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175634 91177308-0d34-0410-b5e6-96231b3b80d8
During lowering of a BUILD_VECTOR, we look for opportunities to use a
vector splat. When the splatted value fits in 5 signed bits, a single
splat does the job. When it doesn't fit in 5 bits but does fit in 6,
and is an even value, we can splat on half the value and add the result
to itself.
This last optimization hasn't been working recently because of improved
constant folding. To circumvent this, create a pseudo VADD_SPLAT that
can be expanded during instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175632 91177308-0d34-0410-b5e6-96231b3b80d8
sext <4 x i1> to <4 x i64>
sext <4 x i8> to <4 x i64>
sext <4 x i16> to <4 x i64>
I'm running Combine on SIGN_EXTEND_IN_REG and revert SEXT patterns:
(sext_in_reg (v4i64 anyext (v4i32 x )), ExtraVT) -> (v4i64 sext (v4i32 sext_in_reg (v4i32 x , ExtraVT)))
The sext_in_reg (v4i32 x) may be lowered to shl+sar operations.
The "sar" does not exist on 64-bit operation, so lowering sext_in_reg (v4i64 x) has no vector solution.
I also added a cost of this operations to the AVX costs table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175619 91177308-0d34-0410-b5e6-96231b3b80d8
It is possible that frame pointer is not found in the
callee saved info, thus FramePtrSpillFI may be incorrect
if we don't check the result of hasFP(MF).
Besides, if we enable the stack coloring algorithm, there
will be an assertion to ensure the slot is live. But in
the test case, %var1 is not live in the prologue of the
function, and we will get the assertion failure.
Note: There is similar code in ARMFrameLowering.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175616 91177308-0d34-0410-b5e6-96231b3b80d8
SltCCRxRy16, SltiCCRxImmX16, SltiuCCRxImmX16, SltuCCRxRy16
$T8 shows up as register $24 when emitted from C++ code so we had
to change some tests that were already there for this functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175593 91177308-0d34-0410-b5e6-96231b3b80d8
MS-style inline assembly.
This is a follow-on to r175334. Forcing a FP to be emitted doesn't ensure it
will be used. Therefore, force the base pointer as well. We now treat MS
inline assembly in the same way we treat functions with dynamic stack
realignment and VLAs. This guarantees the BP will be used to reference
parameters and locals.
rdar://13218191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175576 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips (o32 abi) specific e_header setting.
EF_MIPS_ABI_O32 needs to be set in the
ELF header flags for o32 abi output.
Contributer: Reed Kotler
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175569 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips (Mips16) specific e_header setting.
EF_MIPS_ARCH_ASE_M16 needs to be set in the
ELF header flags for Mips16.
Contributer: Reed Kotler
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175566 91177308-0d34-0410-b5e6-96231b3b80d8
When creating an allocation hint for a register pair, make sure the hint
for the physical register reference is still in the allocation order.
rdar://13240556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175541 91177308-0d34-0410-b5e6-96231b3b80d8
Due to the execution order of doFinalization functions, the GC information were
deleted before AsmPrinter::doFinalization was executed. Thus, the
GCMetadataPrinter::finishAssembly was never called.
The patch fixes that by moving the code of the GCInfoDeleter::doFinalization to
Printer::doFinalization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175528 91177308-0d34-0410-b5e6-96231b3b80d8
A vectorized sitfp on doubles will get scalarized to a sequence of an
extract_element of <2 x i32>, a bitcast to f32 and a sitofp.
Due to the the extract_element, and the bitcast we will uneccessarily generate
moves between scalar and vector registers.
The patch fixes this by using a COPY_TO_REGCLASS and a EXTRACT_SUBREG to extract
the element from the vector instead.
radar://13191881
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175520 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes asan instrument memory accesses with unusual sizes (e.g. 5 bytes or 10 bytes), e.g. long double or
packed structures.
Instrumentation is done with two 1-byte checks
(first and last bytes) and if the error is found
__asan_report_load_n(addr, real_size) or
__asan_report_store_n(addr, real_size)
is called.
Also, call these two new functions in memset/memcpy
instrumentation.
asan-rt part will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175507 91177308-0d34-0410-b5e6-96231b3b80d8
If the memcpy has an odd length with an alignment of 2, this would incorrectly
assert on the last 1 byte copy.
rdar://13202135
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175459 91177308-0d34-0410-b5e6-96231b3b80d8
Profiling tests *do* need a JIT. They'll pass if a cross-compiler targetting
AArch64 by default has been built, but fail if a native AArch64 compiler has
been build. Therefore XFAIL is inappropriate and we mark them unsupported.
ExecutionEngine tests are JIT by definition, they should also be unsupported.
Transforms/LICM only uses the interpreter to check the output is still sane
after optimisation. It can be switched to use an interpreter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175433 91177308-0d34-0410-b5e6-96231b3b80d8
This expansion will be moved to expandISelPseudos as soon as I can figure
out how to do that. There are other instructions which use this
ExpandFEXT_T8I816_ins and as soon as I have finished expanding them all,
I will delete the macro asm string text so it has no way to be used
in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175413 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes PR15289. This bug was introduced (recently) in r175215; collecting
all std::vector references for candidate pairs to delete at once is invalid
because subsequent lookups in the owning DenseMap could invalidate the
references.
bugpoint was able to reduce a useful test case. Unfortunately, because whether
or not this asserts depends on memory layout, this test case will sometimes
appear to produce valid output. Nevertheless, running under valgrind will
reveal the error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175397 91177308-0d34-0410-b5e6-96231b3b80d8
(or (bool?A:B),(bool?C:D)) --> (bool?(or A,C):(or B,D))
By the time the OR is visited, both the SELECTs have been visited and not
optimized and the OR itself hasn't been transformed so we do this transform in
the hopes that the new ORs will be optimized.
The transform is explicitly disabled for vector-selects until "codegen matures
to handle them better".
Patch by Muhammad Tauqir!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175380 91177308-0d34-0410-b5e6-96231b3b80d8
GNU as rejects them and there are configure scripts in the wild that check if
the assembler rejects ".align 3" to determine whether the alignment is in bytes
or powers of two.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175360 91177308-0d34-0410-b5e6-96231b3b80d8
If the frame pointer is omitted, and any stack changes occur in the inline
assembly, e.g.: "pusha", then any C local variable or C argument references
will be incorrect.
I pass no judgement on anyone who would do such a thing. ;)
rdar://13218191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175334 91177308-0d34-0410-b5e6-96231b3b80d8
When we're recalculating the feature set of the subtarget, we need to have the
ivars in their initial state.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175320 91177308-0d34-0410-b5e6-96231b3b80d8
With bundle alignment, instructions all get their own MCFragments
(unless they are in a bundle-locked group). For instructions with
fixups, this is an MCDataFragment. Emitting actual data (e.g. for
.long) attempts to re-use MCDataFragments, which we don't want int
this case since it leads to fragments which exceed the bundle size.
So, don't reuse them in this case.
Also adds a test and fixes some formatting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175316 91177308-0d34-0410-b5e6-96231b3b80d8
- add sincos to runtime library if target triple environment is GNU
- added canCombineSinCosLibcall() which checks that sincos is in the RTL and
if the environment is GNU then unsafe fpmath is enabled (required to
preserve errno)
- extended sincos-opt lit test
Reviewed by: Hal Finkel
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175283 91177308-0d34-0410-b5e6-96231b3b80d8
It enables to work with a smaller constant, which is target friendly for those which can compare to immediates.
It also avoids inserting a shift in favor of a trunc, which can be free on some targets.
This used to work until LLVM-3.1, but regressed with the 3.2 release.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175270 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the review suggestion to simplify the AArch64 backend. If we
later discover that we *really* need the extra complexity of the
ConstantIslands pass for performance reasons it can be resurrected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175258 91177308-0d34-0410-b5e6-96231b3b80d8
In the near future litpools will be in a different section, which means that
any access to them is at least two instructions. This makes the case for a
movz/movk pair (if total offset <= 32-bits) even more compelling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175257 91177308-0d34-0410-b5e6-96231b3b80d8
not matter but makes it more gcc compatible which avoids possible subtle
problems. Also, turned back on a disabled check in helloworld.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175237 91177308-0d34-0410-b5e6-96231b3b80d8
assembler should also accept a two arg form, as the docuemntation specifies that
the first (destination) register is optional.
This patch uses TwoOperandAliasConstraint to add the two argument form.
It also fixes an 80-column formatting problem in:
test/MC/ARM/neon-bitwise-encoding
<rdar://problem/12909419> Clang rejects ARM NEON assembly instructions
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175221 91177308-0d34-0410-b5e6-96231b3b80d8
It fixes around 100 tfb piglit tests and 16 glean tests.
NOTE: This is a candidate for the Mesa stable branch.
Reviewed-by: Tom Stellard <thomas.stellard at amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175183 91177308-0d34-0410-b5e6-96231b3b80d8
The parser will now accept instructions with alignment specifiers written like
vld1.8 {d16}, [r0:64]
, while also still accepting the incorrect syntax
vld1.8 {d16}, [r0, :64]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175164 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 8b75e6bc35.
The FileCheck tests are not equivalent:
test/CodeGen/X86/tailcall-structret.ll:6:10: error: expected string not found in input
; CHECK: jmp init
^
<stdin>:1:2: note: scanning from here
.section __TEXT,__text,regular,pure_instructions
^
<stdin>:13:2: note: possible intended match here
jmp _init ## TAILCALL
^
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175124 91177308-0d34-0410-b5e6-96231b3b80d8
if the offset fits in 11 bits. This makes use of the fact that the abi
requires sp to be 8 byte aligned so the actual offset can fit in 8
bits. It will be shifted left and sign extended before being actually used.
The assembler or direct object emitter will shift right the 11 bit
signed field by 3 bits. We don't need to deal with that here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175073 91177308-0d34-0410-b5e6-96231b3b80d8
Remove dead functions: renameRegister
Move private member variables from LDV to Impl
Remove ssp/uwtable from testing case
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175072 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed bug in tablegen conversion when source pseudo instruction has
a different number of arguments than the destination instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175066 91177308-0d34-0410-b5e6-96231b3b80d8
This happens when there is both stack realignment and a dynamic alloca in the
function. If we overwrite %esi (rep;movsl uses fixed registers) we'll lose the
base pointer and the next register spill will write into oblivion.
Fixes PR15249 and unbreaks firefox on i386/freebsd. Mozilla uses dynamic allocas
and freebsd a 4 byte stack alignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175057 91177308-0d34-0410-b5e6-96231b3b80d8
RegisterCoalescer used to depend on LiveDebugVariable. LDV removes DBG_VALUEs
without emitting them at the end.
We fix this by removing LDV from RegisterCoalescer. Also add an assertion to
make sure we call emitDebugValues if DBG_VALUEs are removed at
runOnMachineFunction.
rdar://problem/13183203
Reviewed by Andy & Jakob
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175023 91177308-0d34-0410-b5e6-96231b3b80d8
This is complicated by backward labels (e.g., 0b can be both a backward label
and a binary zero). The current implementation assumes [0-9]b is always a
label and thus it's possible for 0b and 1b to not be interpreted correctly for
ms-style inline assembly. However, this is relatively simple to fix in the
inline assembly (i.e., drop the [bB]).
This patch also limits backward labels to [0-9]b, so that only 0b and 1b are
ambiguous.
Part of rdar://12470373
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174983 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombiner::ReduceLoadWidth was converting (trunc i32 (shl i64 v, 32))
into (shl i32 v, 32) into undef. To prevent this, check the shift count
against the final result size.
Patch by: Kevin Schoedel
Reviewed by: Nadav Rotem
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174972 91177308-0d34-0410-b5e6-96231b3b80d8
Vectors were being manually scalarized by the backend. Instead,
let the target-independent code do all of the work. The manual
scalarization was from a time before good target-independent support
for scalarization in LLVM. However, this forces us to specially-handle
vector loads and stores, which we can turn into PTX instructions that
produce/consume multiple operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174968 91177308-0d34-0410-b5e6-96231b3b80d8
Lower reverse shuffles to a vrev64 and a vext instruction instead of the default
legalization of storing and loading to the stack. This is important because we
generate reverse shuffles in the loop vectorizer when we reverse store to an
array.
uint8_t Arr[N];
for (i = 0; i < N; ++i)
Arr[N - i - 1] = ...
radar://13171760
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174929 91177308-0d34-0410-b5e6-96231b3b80d8
This gives a DiagnosticType to all AsmOperands in sight. This replaces all
"invalid operand" diagnostics with something more specific. The messages given
should still be sufficiently vague that they're not usually actively misleading
when LLVM guesses your instruction incorrectly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174871 91177308-0d34-0410-b5e6-96231b3b80d8
Handle chains in which the same offset is used for both loads and
stores to the same array.
Fixes rdar://11410078.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174789 91177308-0d34-0410-b5e6-96231b3b80d8
same so we put in the comment field an indicator when we think we are
emitting the 16 bit version. For the direct object emitter, the difference is
important as well as for other passes which need an accurate count of
program size. There will be other similar putbacks to this for various
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174747 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, even when a pre-increment load or store was generated,
we often needed to keep a copy of the original base register for use
with other offsets. If all of these offsets are constants (including
the offset which was combined into the addressing mode), then this is
clearly unnecessary. This change adjusts these other offsets to use the
new incremented address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174746 91177308-0d34-0410-b5e6-96231b3b80d8
Aside from the question of whether we report a warning or an error when we
can't satisfy a requested stack object alignment, the current implementation
of this is not good. We're not providing any source location in the diagnostics
and the current warning is not connected to any warning group so you can't
control it. We could improve the source location somewhat, but we can do a
much better job if this check is implemented in the front-end, so let's do that
instead. <rdar://problem/13127907>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174741 91177308-0d34-0410-b5e6-96231b3b80d8
Thanks to help from Nadav and Hal, I have a more reasonable (and even
correct!) approach. This specifically penalizes the insertelement
and extractelement operations for the performance hit that will occur
on PowerPC processors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174725 91177308-0d34-0410-b5e6-96231b3b80d8
isn't using the default calling convention. However, if the transformation is
from a call to inline IR, then the calling convention doesn't matter.
rdar://13157990
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174724 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a function to target transform info to query for the cost of address
computation. The cost model analysis pass now also queries this interface.
The code in LoopVectorize adds the cost of address computation as part of the
memory instruction cost calculation. Only there, we know whether the instruction
will be scalarized or not.
Increase the penality for inserting in to D registers on swift. This becomes
necessary because we now always assume that address computation has a cost and
three is a closer value to the architecture.
radar://13097204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174713 91177308-0d34-0410-b5e6-96231b3b80d8
allowed size for the instruction. This code uses RegScavenger to fix this.
We sometimes need 2 registers for Mips16 so we must handle things
differently than how register scavenger is normally used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174696 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions compare two floating point values and return an
integer true (-1) or false (0) value.
When compiling code generated by the Mesa GLSL frontend, the SET*_DX10
instructions save us four instructions for most branch decisions that
use floating-point comparisons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174609 91177308-0d34-0410-b5e6-96231b3b80d8
The test is a binary placed in test/DebugInfo/Inputs, with a source C
file used for reference/reproducing. The source's first line is a clang
build command for reproducing the binary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174543 91177308-0d34-0410-b5e6-96231b3b80d8
account. Atoms use LEA for updating SP in prologs/epilogs, and the
exact LEA opcode depends on the data model.
Also reapplying the test case which was added and then reverted
(because of Atom failures), this time specifying explicitly the CPU in
addition to the triple. The test case now checks all variations (data
mode, cpu Atom vs. Core).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174542 91177308-0d34-0410-b5e6-96231b3b80d8
Weakly defined symbols should evaluate to 0 if they're undefined at
link-time. This is impossible to do with the usual address generation
patterns, so we should use a literal pool entry to materlialise the
address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174518 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are a late addition to the architecture, and may
yet end up behind an optional attribute, but for now they're available
at all times.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174496 91177308-0d34-0410-b5e6-96231b3b80d8
This adds hints to the various "prfm" instructions so that they can
affect the instruction cache as well as the data cache.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174495 91177308-0d34-0410-b5e6-96231b3b80d8
Failure: undefined symbol 'Lline_table_start0'.
Root-cause: we use a symbol subtraction to calculate at_stmt_list, but
the line table entries are not dumped in the assembly.
Fix: use zero instead of a symbol subtraction for Compile Unit 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174479 91177308-0d34-0410-b5e6-96231b3b80d8
We generate one line table for each compilation unit in the object file.
Reviewed by Eric and Kevin.
rdar://problem/13067005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174445 91177308-0d34-0410-b5e6-96231b3b80d8
is a vararg function.
The original code was examining flag OutputArg::IsFixed to determine whether
CC_MipsN_VarArg or CC_MipsN should be called. This is not correct, since this
flag is often set to false when the function being analyzed is a non-variadic
function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174442 91177308-0d34-0410-b5e6-96231b3b80d8
base point of a load, and the overall alignment of the load. This caused infinite loops in DAG combine with the
original application of this patch.
ORIGINAL COMMIT LOG:
When the target-independent DAGCombiner inferred a higher alignment for a load,
it would replace the load with one with the higher alignment. However, it did
not place the new load in the worklist, which prevented later DAG combines in
the same phase (for example, target-specific combines) from ever seeing it.
This patch corrects that oversight, and updates some tests whose output changed
due to slightly different DAGCombine outputs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174431 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, when a fragment is relaxed, its size is modified, but its
offset is not (it gets laid out as a side effect of checking whether
it needs relaxation), then all subsequent fragments are invalidated
because their offsets need to change. When bundling is enabled,
relaxed fragments need to get laid out again, because the increase in
size may push it over a bundle boundary. So instead of only
invalidating subsequent fragments, also invalidate the fragment that
gets relaxed, which causes it to get laid out again.
This patch also fixes some trailing whitespace and fixes the
bundling-related debug output of MCFragments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174401 91177308-0d34-0410-b5e6-96231b3b80d8
Emitting the function name allows us to check for it in the FileCheck
tests so we can make sure FileCheck is checking the output of the
correct function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174392 91177308-0d34-0410-b5e6-96231b3b80d8
In the loop vectorizer cost model, we used to ignore stores/loads of a pointer
type when computing the widest type within a loop. This meant that if we had
only stores/loads of pointers in a loop we would return a widest type of 8bits
(instead of 32 or 64 bit) and therefore a vector factor that was too big.
Now, if we see a consecutive store/load of pointers we use the size of a pointer
(from data layout).
This problem occured in SingleSource/Benchmarks/Shootout-C++/hash.cpp (reduced
test case is the first test in vector_ptr_load_store.ll).
radar://13139343
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174377 91177308-0d34-0410-b5e6-96231b3b80d8
It caused hangups in compiling clang/lib/Parse/ParseDecl.cpp and clang/lib/Driver/Tools.cpp in stage2 on some hosts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174374 91177308-0d34-0410-b5e6-96231b3b80d8
The sh_link in the ELF section header of .ARM.exidx should
be filled with the section index of the corresponding text
section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174372 91177308-0d34-0410-b5e6-96231b3b80d8
and enables the instruction printer to print aliased
instructions.
Due to usage of RegisterOperands a change in common
code (utils/TableGen/AsmWriterEmitter.cpp) is required
to get the correct register value if it is a RegisterOperand.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174358 91177308-0d34-0410-b5e6-96231b3b80d8
