Summary:
Each generated helper can be configured to generate an option that disables
rules in that helper. This can be used to bisect rulesets.
The disable bits are stored in a SparseVector as this is very cheap for the
common case where nothing is disabled. It gets more expensive the more rules
are disabled but you're generally doing that for debug purposes where
performance is less of a concern.
Depends on D68426
Reviewers: volkan, bogner
Reviewed By: volkan
Subscribers: hiraditya, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68438
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375067 91177308-0d34-0410-b5e6-96231b3b80d8
After changing dsymutil to use libOption, we lost error reporting for
missing required arguments (input files). Additionally, we stopped
complaining about unknown arguments. This patch fixes both and adds a
test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375044 91177308-0d34-0410-b5e6-96231b3b80d8
r374772 changed Offset to be an int64_t but left NewOffset as an int.
Scale is unsigned, so in the calculation `Offset - NewOffset * Scale`,
`NewOffset * Scale` was promoted to unsigned and was then zero-extended
to 64 bits, leading to an incorrect computation which manifested as an
out-of-memory when building the Swift standard library for Android
aarch64. Promote NewOffset to int64_t to fix this, and promote
EmittableOffset as well, since its one user passes it to a function
which takes an int64_t anyway.
Test case based on a suggestion by Sander de Smalen!
Differential Revision: https://reviews.llvm.org/D69018
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375043 91177308-0d34-0410-b5e6-96231b3b80d8
The problem is that we can have two loop exits, 'a' and 'b', where 'a' and 'b' would exit at the same iteration, 'a' precedes 'b' along some path, and 'b' is predicated while 'a' is not. In this case (see the previously submitted test case), we causing the loop to exit through 'b' whereas it should have exited through 'a'.
This only applies to loop exits where the exit counts are not provably inequal, but that isn't as much of a restriction as it appears. If we could order the exit counts, we'd have already removed one of the two exits. In theory, we might be able to prove inequality w/o ordering, but I didn't really explore that piece. Instead, I went for the obvious restriction and ensured we didn't predicate exits following non-predicateable exits.
Credit goes to Evgeny Brevnov for figuring out the problematic case. Fuzzing probably also found it (failures seen), but due to some silly infrastructure problems I hadn't gotten to the results before Evgeny hand reduced it from a benchmark (he manually enabled the transform). Once this is fixed, I'll try to filter through the fuzzer failures to see if there's anything additional lurking.
Differential Revision https://reviews.llvm.org/D68956
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375038 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Also update the help modifier (h) so that it works as a modifier and not just as a standalone `h`. For example, `llvm-ar h` prints the help message, but `llvm-ar xh` currently prints `unknown option h`.
Reviewers: MaskRay, gbreynoo
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69007
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375028 91177308-0d34-0410-b5e6-96231b3b80d8
The 1st attempt at this modified the cost model in a bad way to avoid the vectorization,
but that caused problems for other users (the loop vectorizer) of the cost model.
I don't see an ideal solution to these 2 related, potentially large, perf regressions:
https://bugs.llvm.org/show_bug.cgi?id=42708https://bugs.llvm.org/show_bug.cgi?id=43146
We decided that load combining was unsuitable for IR because it could obscure other
optimizations in IR. So we removed the LoadCombiner pass and deferred to the backend.
Therefore, preventing SLP from destroying load combine opportunities requires that it
recognizes patterns that could be combined later, but not do the optimization itself (
it's not a vector combine anyway, so it's probably out-of-scope for SLP).
Here, we add a cost-independent bailout with a conservative pattern match for a
multi-instruction sequence that can probably be reduced later.
In the x86 tests shown (and discussed in more detail in the bug reports), SDAG combining
will produce a single instruction on these tests like:
movbe rax, qword ptr [rdi]
or:
mov rax, qword ptr [rdi]
Not some (half) vector monstrosity as we currently do using SLP:
vpmovzxbq ymm0, dword ptr [rdi + 1] # ymm0 = mem[0],zero,zero,..
vpsllvq ymm0, ymm0, ymmword ptr [rip + .LCPI0_0]
movzx eax, byte ptr [rdi]
movzx ecx, byte ptr [rdi + 5]
shl rcx, 40
movzx edx, byte ptr [rdi + 6]
shl rdx, 48
or rdx, rcx
movzx ecx, byte ptr [rdi + 7]
shl rcx, 56
or rcx, rdx
or rcx, rax
vextracti128 xmm1, ymm0, 1
vpor xmm0, xmm0, xmm1
vpshufd xmm1, xmm0, 78 # xmm1 = xmm0[2,3,0,1]
vpor xmm0, xmm0, xmm1
vmovq rax, xmm0
or rax, rcx
vzeroupper
ret
Differential Revision: https://reviews.llvm.org/D67841
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375025 91177308-0d34-0410-b5e6-96231b3b80d8
Using GNU diff, `--strip-trailing-cr` removes a `\r` appearing before
a `\n` at the end of a line. Without this patch, lit's internal diff
only removes `\r` if it appears as the last character. That seems
useless. This patch fixes that.
This patch also adds `--strip-trailing-cr` to some tests that fail on
Windows bots when D68664 is applied. Based on what I see in the bot
logs, I think the following is happening. In each test there, lit
diff is comparing a file with `\r\n` line endings to a file with `\n`
line endings. Without D68664, lit diff reads those files in text
mode, which in Windows causes `\r\n` to be replaced with `\n`.
However, with D68664, lit diff reads the files in binary mode instead
and thus reports that every line is different, just as GNU diff does
(at least under Ubuntu). Adding `--strip-trailing-cr` to those tests
restores the previous behavior while permitting the behavior of lit
diff to be more like GNU diff.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D68839
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375020 91177308-0d34-0410-b5e6-96231b3b80d8
Add some extra sat tests and adjust some of the existing tests to use signext where it would naturally be.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375009 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, BPF backend is doing truncation elimination. If one truncation
is performed on a value defined by narrow loads, then it could be redundant
given BPF loads zero extend the destination register implicitly.
When the definition of the truncated value is a merging value (PHI node)
that could come from different code paths, then checks need to be done on
all possible code paths.
Above described optimization was introduced as r306685, however it doesn't
work when there is back-edge, for example when loop is used inside BPF
code.
For example for the following code, a zero-extended value should be stored
into b[i], but the "and reg, 0xffff" is wrongly eliminated which then
generates corrupted data.
void cal1(unsigned short *a, unsigned long *b, unsigned int k)
{
unsigned short e;
e = *a;
for (unsigned int i = 0; i < k; i++) {
b[i] = e;
e = ~e;
}
}
The reason is r306685 was trying to do the PHI node checks inside isel
DAG2DAG phase, and the checks are done on MachineInstr. This is actually
wrong, because MachineInstr is being built during isel phase and the
associated information is not completed yet. A quick search shows none
target other than BPF is access MachineInstr info during isel phase.
For an PHI node, when you reached it during isel phase, it may have all
predecessors linked, but not successors. It seems successors are linked to
PHI node only when doing SelectionDAGISel::FinishBasicBlock and this
happens later than PreprocessISelDAG hook.
Previously, BPF program doesn't allow loop, there is probably the reason
why this bug was not exposed.
This patch therefore fixes the bug by the following approach:
- The existing truncation elimination code and the associated
"load_to_vreg_" records are removed.
- Instead, implement truncation elimination using MachineSSA pass, this
is where all information are built, and keep the pass together with other
similar peephole optimizations inside BPFMIPeephole.cpp. Redundant move
elimination logic is updated accordingly.
- Unit testcase included + no compilation errors for kernel BPF selftest.
Patch Review
===
Patch was sent to and reviewed by BPF community at:
https://lore.kernel.org/bpf
Reported-by: David Beckett <david.beckett@netronome.com>
Reviewed-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375007 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch implements the `TargetInstrInfo::verifyInstruction` hook for RISC-V. Currently the hook verifies the machine instruction's immediate operands, to check if the immediates are within the expected bounds. Without the hook invalid immediates are not detected except when doing assembly parsing, so they are silently emitted (including being truncated when emitting object code).
The bounds information is specified in tablegen by using the `OperandType` definition, which sets the `MCOperandInfo`'s `OperandType` field. Several RISC-V-specific immediate operand types were created, which extend the `MCInstrDesc`'s `OperandType` `enum`.
To have the hook called with `llc` pass it the `-verify-machineinstrs` option. For Clang add the cmake build config `-DLLVM_ENABLE_EXPENSIVE_CHECKS=True`, or temporarily patch `TargetPassConfig::addVerifyPass`.
Review concerns:
- The patch adds immediate operand type checks that cover at least the base ISA. There are several other operand types for the C extension and one type for the F/D extensions that were left out of this initial patch because they introduced further design concerns that I felt were best evaluated separately.
- Invalid register classes (e.g. passing a GPR register where a GPRC is expected) are already caught, so were not included.
- This design makes the more abstract `MachineInstr` verification depend on MC layer definitions, which arguably is not the cleanest design, but is in line with how things are done in other parts of the target and LLVM in general.
- There is some duplication of logic already present in the `MCOperandPredicate`s. Since the `MachineInstr` and `MCInstr` notions of immediates are fundamentally different, this is currently necessary.
Reviewers: asb, lenary
Reviewed By: lenary
Subscribers: hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67397
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375006 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Even though writelane doesn't have the same constraints as other valu
instructions it still can't violate the >1 SGPR operand constraint
Due to later register propagation (e.g. fixing up vgpr operands via
readfirstlane) changing writelane to only have a single SGPR is tricky.
This implementation puts a new check after SIFixSGPRCopies that prevents
multiple SGPRs being used in any writelane instructions.
The algorithm used is to check for trivial copy prop of suitable constants into
one of the SGPR operands and perform that if possible. If this isn't possible
put an explicit copy of Src1 SGPR into M0 and use that instead (this is
allowable for writelane as the constraint is for SGPR read-port and not
constant-bus access).
Reviewers: rampitec, tpr, arsenm, nhaehnle
Reviewed By: rampitec, arsenm, nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, mgorny, yaxunl, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D51932
Change-Id: Ic7553fa57440f208d4dbc4794fc24345d7e0e9ea
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375004 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is something of a workaround to avoid a crash later on in type
legalizer (WidenVectorResult()).
Also added some f16 tests, including a non-working v3f16 case with
a FIXME.
Reviewers: arsenm, tpr, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68865
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374993 91177308-0d34-0410-b5e6-96231b3b80d8
while I investigate the PPC build bot failures.
This reverts commit ad763751565b9663bc338fa2ca5ade86c6ca22ec.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374992 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently Thumb2InstrInfo.cpp uses a register class which is
auto-generated by tablegen. Such approach is fragile because
auto-generated classes might change when other register classes are
added. For example, before https://reviews.llvm.org/D62667
we were using GPRPair_with_gsub_1_in_rGPRRegClass, but had to
change it to GPRPair_with_gsub_1_in_GPRwithAPSRnospRegClass
because the former class stopped being generated (this did not change
the functionality though).
This patch adds a register class consisting of even-odd GPR register
pairs from (R0, R1) to (R10, R11), which excludes (R12, SP) and uses
it in Thumb2InstrInfo.cpp instead of
GPRPair_with_gsub_1_in_GPRwithAPSRnospRegClass.
Reviewers: ostannard, simon_tatham, dmgreen, efriedma
Reviewed By: simon_tatham
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69026
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374990 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Extend the SI Load/Store optimizer to merge MIMG load instructions. Handle
different flavours of image_load and image_sample instructions.
When the instructions of the same subclass differ only in dmask, merge
them and update dmask accordingly.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374984 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the initial plumbing to support optimisation remarks in
the IR hardware-loop pass.
I have left a todo in a comment where we can improve the reporting,
and will iterate on that now that we have this initial support in.
Differential Revision: https://reviews.llvm.org/D68579
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374980 91177308-0d34-0410-b5e6-96231b3b80d8
PromoteTargetBoolean calls getSetccResultType to get the return
type. But we were passing it the setcc result type rather than the
setcc input type. This causes an issue on X86 with avx512vl where
the setcc result type for vXf16 vectors is vXi16 while the
result type for vXi16 vectors is vXi1.
There's really no guarantee that getSetccResultType is the type
we need here. So now we just grab the extend type from
getExtendForContent and extend to the original result VT of the
node we're splitting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374970 91177308-0d34-0410-b5e6-96231b3b80d8
Since r374600 clang emits base address selection entries. Currently
dsymutil does not support these entries and incorrectly interprets them
as location list entries.
This patch adds support for base address selection entries in dsymutil
and makes sure they are relocated correctly.
Thanks to Dave for coming up with the test case!
Differential revision: https://reviews.llvm.org/D69005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374957 91177308-0d34-0410-b5e6-96231b3b80d8
InProcessMemoryManager used to make separate memory allocation calls for each
permission level (RW, RX, RO), which could lead to target-out-of-range errors
if data and code were placed too far apart (this was the source of failures in
the JITLink/AArch64 testcase when it was first landed).
This patch updates InProcessMemoryManager to allocate a single slab which is
subdivided between text and data. This should guarantee that accesses remain
in-range provided that individual object files do not exceed 1Mb in size.
This patch also re-enables the JITLink/AArch64 testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374948 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Two conditions could lead to infinite loops when processing PHI nodes in
SIFixSGPRCopies.
The first condition involves a REG_SEQUENCE that uses registers defined by both
a PHI and a COPY.
The second condition arises when a physical register is copied to a virtual
register which is then used in a PHI node. If the same virtual register is
copied to the same physical register, the result is an endless loop.
%0:sgpr_64 = COPY $sgpr0_sgpr1
%2 = PHI %0, %bb.0, %1, %bb.1
$sgpr0_sgpr1 = COPY %0
Reviewers: alex-t, rampitec, arsenm
Reviewed By: rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68970
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374944 91177308-0d34-0410-b5e6-96231b3b80d8
SUMMARY:
in the xcoff, if the number of relocation entries or line number entries is
overflow(large than or equal 65535) , there will be overflow section for it.
The interpret of overflow section is different with generic section header,
the patch implement parsing the overflow section.
Reviewers: hubert.reinterpretcast,sfertile,jasonliu
Subscribers: rupprecht, seiya
Differential Revision: https://reviews.llvm.org/D68575
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374941 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Renames `ExprType` to the more apt `BlockType` and adds a variant for
multivalue blocks. Currently non-void blocks are only generated at the
end of functions where the block return type needs to agree with the
function return type, and that remains true for multivalue
blocks. That invariant means that the actual signature does not need
to be stored in the block signature `MachineOperand` because it can be
inferred by `WebAssemblyMCInstLower` from the return type of the
parent function. `WebAssemblyMCInstLower` continues to lower block
signature operands to immediates when possible but lowers multivalue
signatures to function type symbols. The AsmParser and Disassembler
are updated to handle multivalue block types as well.
Reviewers: aheejin, dschuff, aardappel
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68889
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374933 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When listing the index in `llvm-objdump -h`, use a zero-based counter instead of the actual section index (e.g. shdr->sh_index for ELF).
While this is effectively a noop for now (except one unit test for XCOFF), the index values will change in a future patch that filters certain sections out (e.g. symbol tables). See D68669 for more context. Note: the test case in `test/tools/llvm-objdump/X86/section-index.s` already covers the case of incrementing the section index counter when sections are skipped.
Reviewers: grimar, jhenderson, espindola
Reviewed By: grimar
Subscribers: emaste, sbc100, arichardson, aheejin, arphaman, seiya, llvm-commits, MaskRay
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68848
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374931 91177308-0d34-0410-b5e6-96231b3b80d8
I removed this test to unblock the ARM bots while looking into failures
(r374915), and am reinstating it now with a fix.
I believe the problem was that counter ptr address I used,
'\0\0\6\0\1\0\0\1', set the high bits of the pointer, not the low bits
like I wanted. On x86_64 this superficially looks like it tests r370826,
but it doesn't, as it would have been caught before r370826. However, on
ARM (or, 32-bit hosts more generally), I suspect the high bits were
cleared, and you get a 'valid' profile.
I verified that setting the *low* bits of the pointer does trigger the
new condition:
-// Note: The CounterPtr here is off-by-one. This should trigger a malformed profile error.
-RUN: printf '\0\0\6\0\1\0\0\1' >> %t.profraw
+// Note: The CounterPtr here is off-by-one.
+//
+// Octal '\11' is 9 in decimal: this should push CounterOffset to 1. As there are two counters,
+// the profile reader should error out.
+RUN: printf '\11\0\6\0\1\0\0\0' >> %t.profraw
This reverts commit c7cf5b3e4b918c9769fd760f28485b8d943ed968.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374927 91177308-0d34-0410-b5e6-96231b3b80d8
This is remaining part of rG41ca91f2995b: [AIX][XCOFF] Output XCOFF
object text section header and symbol entry for rogram code.
SUMMARY:
Original form of this patch is provided by Stefan Pintillie.
1. The patch try to output program code section header , symbol entry for
program code (PR) and Instruction into the raw text section.
2. The patch include how to alignment and layout the CSection in the text
section.
3. The patch also reorganize the code , put some codes into a function.
(XCOFFObjectWriter::writeSymbolTableEntryForControlSection)
Additional: We can not add raw data of text section test in the patch, If want
to output raw text section data,it need a function description patch first.
Reviewers: hubert.reinterpretcast, sfertile, jasonliu, xingxue.
Subscribers: wuzish, nemanjai, hiraditya, MaskRay, jsjji.
Differential Revision: https://reviews.llvm.org/D66969
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374923 91177308-0d34-0410-b5e6-96231b3b80d8
Check that a call has an attached MemoryAccess before calling
getClobbering on the instruction.
If no access is attached, the instruction does not access memory.
Resolves PR43441.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374920 91177308-0d34-0410-b5e6-96231b3b80d8
SUMMARY
Original form of this patch is provided by Stefan Pintillie.
The patch try to output program code section header , symbol entry for program code (PR) and Instruction into the raw text section.
The patch include how to alignment and layout the CSection in the text section.
The patch also reorganize the code , put some codes into a function(XCOFFObjectWriter::writeSymbolTableEntryForControlSection)
Additional: We can not add raw data of text section test in the patch, If want to output raw text section data,it need a function description patch first.
Reviewers: hubert.reinterpretcast, sfertile, jasonliu, xingxue.
Subscribers: wuzish, nemanjai, hiraditya, MaskRay, jsjji.
Differential Revision: https://reviews.llvm.org/D66969
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374914 91177308-0d34-0410-b5e6-96231b3b80d8
Examples:
i32 X > -1 ? C1 : -1 --> (X >>s 31) | C1
i8 X < 0 ? C1 : 0 --> (X >>s 7) & C1
This is a small generalization of a fold requested in PR43650:
https://bugs.llvm.org/show_bug.cgi?id=43650
The sign-bit of the condition operand can be used as a mask for the true operand:
https://rise4fun.com/Alive/paT
Note that we already handle some of the patterns (isNegative + scalar) because
there's an over-specialized, yet over-reaching fold for that in foldSelectCCToShiftAnd().
It doesn't use any TLI hooks, so I can't easily rip out that code even though we're
duplicating part of it here. This fold is guarded by TLI.convertSelectOfConstantsToMath(),
so it should not cause problems for targets that prefer select over shift.
Also worth noting: I thought we could generalize this further to include the case where
the true operand of the select is not constant, but Alive says that may allow poison to
pass through where it does not in the original select form of the code.
Differential Revision: https://reviews.llvm.org/D68949
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374902 91177308-0d34-0410-b5e6-96231b3b80d8
The 1st attempt at rL374828 inserted the code
at the wrong position (outside of the constant-shift-amount
block). Trying again with an additional test to verify
const-ness.
For a constant shift amount, add the following fold.
shl (zext (i1 X)), ShAmt --> select (X, 1 << ShAmt, 0)
https://rise4fun.com/Alive/IZ9
Fixes PR42257.
Based on original patch by @zvi (Zvi Rackover)
Differential Revision: https://reviews.llvm.org/D63382
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374886 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Internally in LLVM's metadata we use DW_OP_entry_value operations with
the same semantics as DWARF; that is, its operand specifies the number
of bytes that the entry value covers.
At the time of emitting entry values we don't know the emitted size of
the DWARF expression that the entry value will cover. Currently the size
is hardcoded to 1 in DIExpression, and other values causes the verifier
to fail. As the size is 1, that effectively means that we can only have
valid entry values for registers that can be encoded in one byte, which
are the registers with DWARF numbers 0 to 31 (as they can be encoded as
single-byte DW_OP_reg0..DW_OP_reg31 rather than a multi-byte
DW_OP_regx). It is a bit confusing, but it seems like llvm-dwarfdump
will print an operation "correctly", even if the byte size is less than
that, which may make it seem that we emit correct DWARF for registers
with DWARF numbers > 31. If you instead use readelf for such cases, it
will interpret the number of specified bytes as a DWARF expression. This
seems like a limitation in llvm-dwarfdump.
As suggested in D66746, a way forward would be to add an internal
variant of DW_OP_entry_value, DW_OP_LLVM_entry_value, whose operand
instead specifies the number of operations that the entry value covers,
and we then translate that into the byte size at the time of emission.
In this patch that internal operation is added. This patch keeps the
limitation that a entry value can only be applied to simple register
locations, but it will fix the issue with the size operand being
incorrect for DWARF numbers > 31.
Reviewers: aprantl, vsk, djtodoro, NikolaPrica
Reviewed By: aprantl
Subscribers: jyknight, fedor.sergeev, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67492
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374881 91177308-0d34-0410-b5e6-96231b3b80d8
This patch kills off a significant user of the "IsIndirect" field of
DBG_VALUE machine insts. Brought up in in PR41675, IsIndirect is
techncally redundant as it can be expressed by the DIExpression of a
DBG_VALUE inst, and it isn't helpful to have two ways of expressing
things.
Rather than setting IsIndirect, have DBG_VALUE creators add an extra deref
to the insts DIExpression. There should now be no appearences of
IsIndirect=True from isel down to LiveDebugVariables / VirtRegRewriter,
which is ensured by an assertion in LDVImpl::handleDebugValue. This means
we also get to delete the IsIndirect handling in LiveDebugVariables. Tests
can be upgraded by for example swapping the following IsIndirect=True
DBG_VALUE:
DBG_VALUE $somereg, 0, !123, !DIExpression(DW_OP_foo)
With one where the indirection is in the DIExpression, by _appending_
a deref:
DBG_VALUE $somereg, $noreg, !123, !DIExpression(DW_OP_foo, DW_OP_deref)
Which both mean the same thing.
Most of the test changes in this patch are updates of that form; also some
changes in how the textual assembly printer handles these insts.
Differential Revision: https://reviews.llvm.org/D68945
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374877 91177308-0d34-0410-b5e6-96231b3b80d8
Add vector MSA register classes to fprb, they are 128 bit wide.
MSA instructions use the same registers for both integer and floating
point operations. Therefore we only need to check for vector element
size during legalization or instruction selection.
Add helper function in MipsLegalizerInfo and switch to legalIf
LegalizeRuleSet to keep legalization rules compact since they depend
on MipsSubtarget and presence of MSA.
fprb is assigned to all vector operands.
Move selectLoadStoreOpCode to MipsInstructionSelector in order to
reduce number of arguments.
Differential Revision: https://reviews.llvm.org/D68867
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374872 91177308-0d34-0410-b5e6-96231b3b80d8
Daniel Sanders