integers in that the code to handle split alloca-wide integer loads or
stores doesn't come first. It should, for the same reasons as with
integers, and the PR attests to that. Also had to fix a busted assert in
that this test case also covers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167051 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds more support for vector type comparisons using altivec.
It adds correct support for v16i8, v8i16, v4i32, and v4f32 vector
types for comparison operators ==, !=, >, >=, <, and <=.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167015 91177308-0d34-0410-b5e6-96231b3b80d8
When the switch-to-lookup tables transform landed in SimplifyCFG, it
was pointed out that this could be inappropriate for some targets.
Since there was no way at the time for the pass to know anything about
the target, an awkward reverse-transform was added in CodeGenPrepare
that turned lookup tables back into switches for some targets.
This patch uses the new TargetTransformInfo to determine if a
switch should be transformed, and removes
CodeGenPrepare::ConvertLoadToSwitch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167011 91177308-0d34-0410-b5e6-96231b3b80d8
getCastInstrCost had an assert prohibiting scalar to vector casts. Such casts,
however, are allowed. This should make the vectorizer buildbot happier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166998 91177308-0d34-0410-b5e6-96231b3b80d8
When the operand is a plain immediate rather than a label, print it
as [pc, #imm] like we do for the Thumb2 wide encoding variant.
rdar://12154503
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166991 91177308-0d34-0410-b5e6-96231b3b80d8
We will make them delay slot forms if there is something that can be
placed in the delay slot during a separate pass. Mips16 extended instructions
cannot be placed in delay slots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166990 91177308-0d34-0410-b5e6-96231b3b80d8
is 24 bits not 20 and the decoding needed to correctly handle converting the
J1 and J2 bits to their I1 and I2 values to reconstruct the displacement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166982 91177308-0d34-0410-b5e6-96231b3b80d8
ELF ABI.
A varargs parameter consisting of a single-precision floating-point value,
or of a single-element aggregate containing a single-precision floating-point
value, must be passed in the low-order (rightmost) four bytes of the
doubleword stack slot reserved for that parameter. If there are GPR protocol
registers remaining, the parameter must also be mirrored in the low-order
four bytes of the reserved GPR.
Prior to this patch, such parameters were being passed in the high-order
four bytes of the stack slot and the mirrored GPR.
The patch adds a new test case to verify the correct code generation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166968 91177308-0d34-0410-b5e6-96231b3b80d8
checks to avoid performing compile-time arithmetic on PPCDoubleDouble.
Now that APFloat supports arithmetic on PPCDoubleDouble, those checks
are no longer needed, and we can treat the type like any other.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166958 91177308-0d34-0410-b5e6-96231b3b80d8
Partial copies can show up even when CoalescerPair.isPartial() returns
false. For example:
%vreg24:dsub_0<def> = COPY %vreg31:dsub_0; QPR:%vreg24,%vreg31
Such a partial-partial copy is not good enough for the transformation
adjustCopiesBackFrom() needs to do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166944 91177308-0d34-0410-b5e6-96231b3b80d8
incorrect instruction sequence due to it not being aware that an
inline assembly instruction may reference memory.
This patch fixes the problem by causing the scheduler to always assume that any
inline assembly code instruction could access memory. This is necessary because
the internal representation of the inline instruction does not include
any information about memory accesses.
This should fix PR13504.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166929 91177308-0d34-0410-b5e6-96231b3b80d8
ELF subtarget.
The existing logic is used as a fallback to avoid any changes to the Darwin
ABI. PPC64 ELF now has two possible data layout strings: one for FreeBSD,
which requires 8-byte alignment, and a default string that requires
16-byte alignment.
I've added a test for PPC64 Linux to verify the 16-byte alignment. If
somebody wants to add a separate test for FreeBSD, that would be great.
Note that there is a companion patch to update the alignment information
in Clang, which I am committing now as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166928 91177308-0d34-0410-b5e6-96231b3b80d8
split module can see each other. If it is keeping a symbol that already has
a non local linkage, it doesn't need to change it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166908 91177308-0d34-0410-b5e6-96231b3b80d8
output of both
llvm-extract foo.ll -func=bar
and
llvm-extract foo.ll -func=bar -delete
so the two new files could not be linked together anymore. With this change
alias are handled almost like functions and global variables. Almost because
with alias we cannot just clear the initializer/body, we have to create a new
declaration and replace the alias with it.
The net result is that now the output of the above commands can be linked
even if foo.ll has aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166907 91177308-0d34-0410-b5e6-96231b3b80d8
Previously mips16 was sharing the pattern addr which is used for mips32
and mips64. This had a number of problems:
1) Storing and loading byte and halfword quantities for mips16 has particular
problems due to the primarily non mips16 nature of SP. When we must
load/store byte/halfword stack objects in a function, we must create a mips16
alias register for SP. This functionality is tested in stchar.ll.
2) We need to have an FP register under certain conditions (such as
dynamically sized alloca). We use mips16 register S0 for this purpose.
In this case, we also use this register when accessing frame objects so this
issue also affects the complex pattern addr16. This functionality is
tested in alloca16.ll.
The Mips16InstrInfo.td has been updated to use addr16 instead of addr.
The complex pattern C++ function for addr has been copied to addr16 and
updated to reflect the above issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166897 91177308-0d34-0410-b5e6-96231b3b80d8
This turns loops like
for (unsigned i = 0; i != n; ++i)
p[i] = p[i+1];
into memmove, which has a highly optimized implementation in most libcs.
This was really easy with the new DependenceAnalysis :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166875 91177308-0d34-0410-b5e6-96231b3b80d8
Requires a lot less code and complexity on loop-idiom's side and the more
precise analysis can catch more cases, like the one I included as a test case.
This also fixes the edge-case miscompilation from PR9481.
Compile time performance seems to be slightly worse, but this is mostly due
to an extra LCSSA run scheduled by the PassManager and should be fixed there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166874 91177308-0d34-0410-b5e6-96231b3b80d8
Add getCostXXX calls for different families of opcodes, such as casts, arithmetic, cmp, etc.
Port the LoopVectorizer to the new API.
The LoopVectorizer now finds instructions which will remain uniform after vectorization. It uses this information when calculating the cost of these instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166836 91177308-0d34-0410-b5e6-96231b3b80d8
Keep the integer_insertelement test case, the new coalescer can handle
this kind of lane insertion without help from pseudo-instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166835 91177308-0d34-0410-b5e6-96231b3b80d8
Some instructions in ARM require 2 even-odd paired GPRs. This
patch adds support for such register class.
Patch by Weiming Zhao!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166816 91177308-0d34-0410-b5e6-96231b3b80d8
It was unmaintained and not much more than a stub. The new DependenceAnalysis
pass is both more general and complete.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166810 91177308-0d34-0410-b5e6-96231b3b80d8
list of externals. This makes sense since a shared library with no symbols
can still be useful if it has static constructors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166795 91177308-0d34-0410-b5e6-96231b3b80d8
The LoopSimplify bug is pretty harmless because the loop goes from unanalyzable
to analyzable but the LCSSA bug is very nasty. It only comes into play with a
specific order of the LoopPassManager worklist and can cause actual
miscompilations, when a SCEV refers to a value that has been replaced with PHI
node. SCEVExpander may then insert code into the wrong place, either violating
domination or randomly miscompiling stuff.
Comes with an extensive test case reduced from the test-suite with
bugpoint+SCEVValidator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166787 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first of several steps to incorporate information from the new
TargetTransformInfo infrastructure into BBVectorize. Two things are done here:
1. Target information is used to determine if it is profitable to fuse two
instructions. This means that the cost of the vector operation must not
be more expensive than the cost of the two original operations. Pairs that
are not profitable are no longer considered (because current cost information
is incomplete, for intrinsics for example, equal-cost pairs are still
considered).
2. The 'cost savings' computed for the profitability check are also used to
rank the DAGs that represent the potential vectorization plans. Specifically,
for nodes of non-trivial depth, the cost savings is used as the node
weight.
The next step will be to incorporate the shuffle costs into the DAG weighting;
this will give the edges of the DAG weights as well. Once that is done, when
target information is available, we should be able to dispense with the
depth heuristic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166716 91177308-0d34-0410-b5e6-96231b3b80d8
The isValueEqualityComparison() guard at the top of SimplifySwitch()
only applies to some of the possible transformations.
The newer transformations work just fine on large switches, and the
check on predecessor count is nonsensical.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166710 91177308-0d34-0410-b5e6-96231b3b80d8
structs having size 3, 5, 6, or 7. Such a struct must be passed and received
as right-justified within its register or memory slot. The problem is only
present for structs that are passed in registers.
Previously, as part of a patch handling all structs of size less than 8, I
added logic to rotate the incoming register so that the struct was left-
justified prior to storing the whole register. This was incorrect because
the address of the parameter had already been adjusted earlier to point to
the right-adjusted value in the storage slot. Essentially I had accidentally
accounted for the right-adjustment twice.
In this patch, I removed the incorrect logic and reorganized the code to make
the flow clearer.
The removal of the rotates changes the expected code generation, so test case
structsinregs.ll has been modified to reflect this. I also added a new test
case, jaggedstructs.ll, to demonstrate that structs of these sizes can now
be properly received and passed.
I've built and tested the code on powerpc64-unknown-linux-gnu with no new
regressions. I also ran the GCC compatibility test suite and verified that
earlier problems with these structs are now resolved, with no new regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166680 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds initial PPC64 TOC MC object creation using the small mcmodel
(a single 64K TOC) adding the some TOC relocations (R_PPC64_TOC,
R_PPC64_TOC16, and R_PPC64_TOC16DS).
The addition of 'undefinedExplicitRelSym' hook on 'MCELFObjectTargetWriter'
is meant to avoid the creation of an unreferenced ".TOC." symbol (used in
the .odp creation) as well to set the R_PPC64_TOC relocation target as the
temporary ".TOC." symbol. On PPC64 ABI, the R_PPC64_TOC relocation should
not point to any symbol.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166677 91177308-0d34-0410-b5e6-96231b3b80d8
smaller integer loads and stores.
The high-level motivation is that the frontend sometimes generates
a single whole-alloca integer load or store during ABI lowering of
splittable allocas. We need to be able to break this apart in order to
see the underlying elements and properly promote them to SSA values. The
hope is that this fixes some performance regressions on x86-32 with the
new SROA pass.
Unfortunately, this causes quite a bit of churn in the test cases, and
bloats some IR that comes out. When we see an alloca that consists soley
of bits and bytes being extracted and re-inserted, we now do some
splitting first, before building widened integer "bucket of bits"
representations. These are always well folded by instcombine however, so
this shouldn't actually result in missed opportunities.
If this splitting of all-integer allocas does cause problems (perhaps
due to smaller SSA values going into the RA), we could potentially go to
some extreme measures to only do this integer splitting trick when there
are non-integer component accesses of an alloca, but discovering this is
quite expensive: it adds yet another complete walk of the recursive use
tree of the alloca.
Either way, I will be watching build bots and LNT bots to see what
fallout there is here. If anyone gets x86-32 numbers before & after this
change, I would be very interested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166662 91177308-0d34-0410-b5e6-96231b3b80d8
into a sbc with a positive number, the immediate should be complemented, not
negated. Also added a missing pattern for ARM codegen.
rdar://12559385
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166613 91177308-0d34-0410-b5e6-96231b3b80d8
When the trip count is -1, getSmallConstantTripMultiple could return zero,
and this would cause runtime loop unrolling to assert. Instead of returning
zero, one is now returned (consistent with the existing overflow cases).
Fixes PR14167.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166612 91177308-0d34-0410-b5e6-96231b3b80d8
- If more than 1 elemennts are defined and target supports the vectorized
conversion, use the vectorized one instead to reduce the strength on
conversion operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166546 91177308-0d34-0410-b5e6-96231b3b80d8
- As there's no 64-bit GPRs in 32-bit mode, a custom conversion from v2u32 to
v2f32 is added to improve the efficiency of the code generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166545 91177308-0d34-0410-b5e6-96231b3b80d8
the difference from "int x" (which should go in registers and
"struct y {int x;}" (which should not).
Clang will be updated in the next patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166536 91177308-0d34-0410-b5e6-96231b3b80d8
- Check index being extracted to be constant 0 before simplfiying.
Otherwise, retain the original sequence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166504 91177308-0d34-0410-b5e6-96231b3b80d8
loads. It's not really profitable and may result in GVN going into an infinite
loop when it hits constructs like this:
%x = gep %some.type %x, ...
Found via an LTO build of LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166490 91177308-0d34-0410-b5e6-96231b3b80d8
%V = mul i64 %N, 4
%t = getelementptr i8* bitcast (i32* %arr to i8*), i32 %V
into
%t1 = getelementptr i32* %arr, i32 %N
%t = bitcast i32* %t1 to i8*
incorporating the multiplication into the getelementptr.
This happens all the time in dragonegg, for example for
int foo(int *A, int N) {
return A[N];
}
because gcc turns this into byte pointer arithmetic before it hits the plugin:
D.1590_2 = (long unsigned int) N_1(D);
D.1591_3 = D.1590_2 * 4;
D.1592_5 = A_4(D) + D.1591_3;
D.1589_6 = *D.1592_5;
return D.1589_6;
The D.1592_5 line is a POINTER_PLUS_EXPR, which is turned into a getelementptr
on a bitcast of A_4 to i8*, so this becomes exactly the kind of IR that the
transform fires on.
An analogous transform (with no testcases!) already existed for bitcasts of
arrays, so I rewrote it to share code with this one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166474 91177308-0d34-0410-b5e6-96231b3b80d8
The CFG of the machine function needs to know that the targets of the indirect
branch are successors to the indirect branch.
<rdar://problem/12529625>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166448 91177308-0d34-0410-b5e6-96231b3b80d8
Per the October 12, 2012 Proposal for annotated disassembly output sent out by
Jim Grosbach this set of changes implements this for X86 and arm. The llvm-mc
tool now has a -mdis option to produced the marked up disassembly and a couple
of small example test cases have been added.
rdar://11764962
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166445 91177308-0d34-0410-b5e6-96231b3b80d8
Unreachable blocks can have invalid instructions. For example,
jump threading can produce self-referential instructions in
unreachable blocks. Also, we should not be spending time
optimizing unreachable code. Fixes PR14133.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166423 91177308-0d34-0410-b5e6-96231b3b80d8
very small but very important bugfix:
bool shouldExplore(Use *U) {
Value *V = U->get();
if (isa<CallInst>(V) || isa<InvokeInst>(V))
[...]
should have read:
bool shouldExplore(Use *U) {
Value *V = U->getUser();
if (isa<CallInst>(V) || isa<InvokeInst>(V))
Fixes PR14143!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166407 91177308-0d34-0410-b5e6-96231b3b80d8
This is important for vectors of pointers because only DataLayout,
not the underlying vector type, knows how to calculate the size
of the pointers in the vector. Fixes PR14138.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166401 91177308-0d34-0410-b5e6-96231b3b80d8
It passes all tests, produces better results than the old code but uses the
wrong pass, LoopDependenceAnalysis, which is old and unmaintained. "Why is it
still in tree?", you might ask. The answer is obviously: "To confuse developers."
Just swapping in the new dependency pass sends the pass manager into an infinte
loop, I'll try to figure out why tomorrow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166399 91177308-0d34-0410-b5e6-96231b3b80d8
Requires a lot less code and complexity on loop-idiom's side and the more
precise analysis can catch more cases, like the one I included as a test case.
This also fixes the edge-case miscompilation from PR9481. I'm not entirely
sure that all cases are handled that the old checks handled but LDA will
certainly become smarter in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166390 91177308-0d34-0410-b5e6-96231b3b80d8
We used a SCEV to detect that A[X] is consecutive. We assumed that X was
the induction variable. But X can be any expression that uses the induction
for example: X = i + 2;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166388 91177308-0d34-0410-b5e6-96231b3b80d8
This is important for nested-loop reductions such as :
In the innermost loop, the induction variable does not start with zero:
for (i = 0 .. n)
for (j = 0 .. m)
sum += ...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166387 91177308-0d34-0410-b5e6-96231b3b80d8
If the pointer is consecutive then it is safe to read and write. If the pointer is non-loop-consecutive then
it is unsafe to vectorize it because we may hit an ordering issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166371 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, it is enabled only if option "enable-mips-tail-calls" is given and
all of the callee's arguments are passed in registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166342 91177308-0d34-0410-b5e6-96231b3b80d8
which is supposed to consistently raise SIGTRAP across all systems. In contrast,
__builtin_trap() behave differently on different systems. e.g. it raises SIGTRAP on ARM, and
SIGILL on X86. The purpose of __builtin_debugtrap() is to consistently provide "trap"
functionality, in the mean time preserve the compatibility with on gcc on __builtin_trap().
The X86 backend is already able to handle debugtrap(). This patch is to:
1) make front-end recognize "__builtin_debugtrap()" (emboddied in the one-line change to Clang).
2) In DAG legalization phase, by default, "debugtrap" will be replaced with "trap", which
make the __builtin_debugtrap() "available" to all existing ports without the hassle of
changing their code.
3) If trap-function is specified (via -trap-func=xyz to llc), both __builtin_debugtrap() and
__builtin_trap() will be expanded into the function call of the specified trap function.
This behavior may need change in the future.
The provided testing-case is to make sure 2) and 3) are working for ARM port, and we
already have a testing case for x86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166300 91177308-0d34-0410-b5e6-96231b3b80d8
- If INSERT_VECTOR_ELT is supported (above SSE2, either by custom
sequence of legal insn), transform BUILD_VECTOR into SHUFFLE +
INSERT_VECTOR_ELT if most of elements could be built from SHUFFLE with few
(so far 1) elements being inserted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166288 91177308-0d34-0410-b5e6-96231b3b80d8
Removed extra stack frame object for fixed byval arguments,
VarArgsStyleRegisters invocation was reworked due to some improper usage in
past. PR14099 also demonstrates it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166273 91177308-0d34-0410-b5e6-96231b3b80d8
The LTO Internalize pass is hiding symbols needed by the bugpoint-passes
plug-in. We need to add a flag to control whether Internalize should be run.
This is a temporary workaround to make these tests pass in the meantime.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166239 91177308-0d34-0410-b5e6-96231b3b80d8
When merging stack slots, if StackColoring::remapInstructions gets a
value back from GetUnderlyingObject that it does not know about or is
not itself a stack slot, clear the memory operand in case it aliases
the merged slot. This prevents the introduction of incorrect aliasing
information.
Author: Matthew Curtis <mcurtis@codeaurora.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166216 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strcpy optimizations from the simplify-libcalls pass
into the instcombine library call simplifier. Note also that StrCpyChkOpt
has been updated with a few simplifications that were being done in the
simplify-libcalls version of StrCpyOpt, but not in the migrated implementation
of StrCpyOpt. There is no reason to overload StrCpyOpt with fortified and
regular simplifications in the new model since there is already a dedicated
simplifier for __strcpy_chk.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166198 91177308-0d34-0410-b5e6-96231b3b80d8
test case on PowerPC caused by rounding errors when converting from a 64-bit
integer to a single-precision floating point. The reason for this are
double-rounding effects, since on PowerPC we have to convert to an
intermediate double-precision value first, which gets rounded to the
final single-precision result.
The patch fixes the problem by preparing the 64-bit integer so that the
first conversion step to double-precision will always be exact, and the
final rounding step will result in the correctly-rounded single-precision
result. The generated code sequence is equivalent to what GCC would generate.
When -enable-unsafe-fp-math is in effect, that extra effort is omitted
and we accept possible rounding errors (just like GCC does as well).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166178 91177308-0d34-0410-b5e6-96231b3b80d8
- Folding (trunc (concat ... X )) to (concat ... (trunc X) ...) is valid
when '...' are all 'undef's.
- r166125 relies on this transformation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166155 91177308-0d34-0410-b5e6-96231b3b80d8
- If the extracted vector has the same type of all vectored being concatenated
together, it should be simplified directly into v_i, where i is the index of
the element being extracted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166125 91177308-0d34-0410-b5e6-96231b3b80d8
a pointer. A very bad idea. Let's not do that. Fixes PR14105.
Note that this wasn't *that* glaring of an oversight. Originally, these
routines were only called on offsets within an alloca, which are
intrinsically positive. But over the evolution of the pass, they ended
up being called for arbitrary offsets, and things went downhill...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166095 91177308-0d34-0410-b5e6-96231b3b80d8
- MBB address is only valid as an immediate value in Small & Static
code/relocation models. On other models, LEA is needed to load IP address of
the restore MBB.
- A minor fix of MBB in MC lowering is added as well to enable target
relocation flag being propagated into MC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166084 91177308-0d34-0410-b5e6-96231b3b80d8
PR14098 contains an example where we would rematerialize a MOV8ri
immediately after the original instruction:
%vreg7:sub_8bit<def> = MOV8ri 9; GR32_ABCD:%vreg7
%vreg22:sub_8bit<def> = MOV8ri 9; GR32_ABCD:%vreg7
Besides being pointless, it is also wrong since the original instruction
only redefines part of the register, and the value read by the new
instruction is wrong.
The problem was the LiveRangeEdit::allUsesAvailableAt() didn't
special-case OrigIdx == UseIdx and found the wrong SSA value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166068 91177308-0d34-0410-b5e6-96231b3b80d8
An obfuscated splat is where the frontend poorly generates code for a splat
using several different shuffles to create the splat, i.e.,
%A = load <4 x float>* %in_ptr, align 16
%B = shufflevector <4 x float> %A, <4 x float> undef, <4 x i32> <i32 0, i32 0, i32 undef, i32 undef>
%C = shufflevector <4 x float> %B, <4 x float> %A, <4 x i32> <i32 0, i32 1, i32 4, i32 undef>
%D = shufflevector <4 x float> %C, <4 x float> %A, <4 x i32> <i32 0, i32 1, i32 2, i32 4>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166061 91177308-0d34-0410-b5e6-96231b3b80d8
For the PowerPC 64-bit ELF Linux ABI, aggregates of size less than 8
bytes are to be passed in the low-order bits ("right-adjusted") of the
doubleword register or memory slot assigned to them. A previous patch
addressed this for aggregates passed in registers. However, small
aggregates passed in the overflow portion of the parameter save area are
still being passed left-adjusted.
The fix is made in PPCTargetLowering::LowerCall_Darwin_Or_64SVR4 on the
caller side, and in PPCTargetLowering::LowerFormalArguments_64SVR4 on
the callee side. The main fix on the callee side simply extends
existing logic for 1- and 2-byte objects to 1- through 7-byte objects,
and correcting a constant left over from 32-bit code. There is also a
fix to a bogus calculation of the offset to the following argument in
the parameter save area.
On the caller side, again a constant left over from 32-bit code is
fixed. Additionally, some code for 1, 2, and 4-byte objects is
duplicated to handle the 3, 5, 6, and 7-byte objects for SVR4 only. The
LowerCall_Darwin_Or_64SVR4 logic is getting fairly convoluted trying to
handle both ABIs, and I propose to separate this into two functions in a
future patch, at which time the duplication can be removed.
The patch adds a new test (structsinmem.ll) to demonstrate correct
passing of structures of all seven sizes. Eight dummy parameters are
used to force these structures to be in the overflow portion of the
parameter save area.
As a side effect, this corrects the case when aggregates passed in
registers are saved into the first eight doublewords of the parameter
save area: Previously they were stored left-justified, and now are
properly stored right-justified. This requires changing the expected
output of existing test case structsinregs.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166022 91177308-0d34-0410-b5e6-96231b3b80d8
Stack is formed improperly for long structures passed as byval arguments for
EABI mode.
If we took AAPCS reference, we can found the next statements:
A: "If the argument requires double-word alignment (8-byte), the NCRN (Next
Core Register Number) is rounded up to the next even register number." (5.5
Parameter Passing, Stage C, C.3).
B: "The alignment of an aggregate shall be the alignment of its most-aligned
component." (4.3 Composite Types, 4.3.1 Aggregates).
So if we have structure with doubles (9 double fields) and 3 Core unused
registers (r1, r2, r3): caller should use r2 and r3 registers only.
Currently r1,r2,r3 set is used, but it is invalid.
Callee VA routine should also use r2 and r3 regs only. All is ok here. This
behaviour is guessed by rounding up SP address with ADD+BFC operations.
Fix:
Main fix is in ARMTargetLowering::HandleByVal. If we detected AAPCS mode and
8 byte alignment, we waste odd registers then.
P.S.:
I also improved LDRB_POST_IMM regression test. Since ldrb instruction will
not generated by current regression test after this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166018 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
The attached is the fix to radar://11663049. The optimization can be outlined by following rules:
(select (x != c), e, c) -> select (x != c), e, x),
(select (x == c), c, e) -> select (x == c), x, e)
where the <c> is an integer constant.
The reason for this change is that : on x86, conditional-move-from-constant needs two instructions;
however, conditional-move-from-register need only one instruction.
While the LowerSELECT() sounds to be the most convenient place for this optimization, it turns out to be a bad place. The reason is that by replacing the constant <c> with a symbolic value, it obscure some instruction-combining opportunities which would otherwise be very easy to spot. For that reason, I have to postpone the change to last instruction-combining phase.
The change passes the test of "make check-all -C <build-root/test" and "make -C project/test-suite/SingleSource".
Original message since r165661:
My previous change has a bug: I negated the condition code of a CMOV, and go ahead creating a new CMOV using the *ORIGINAL* condition code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166017 91177308-0d34-0410-b5e6-96231b3b80d8
This is a medium term workaround until we have a more robust solution
in the form of a register liveness utility for postRA passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166001 91177308-0d34-0410-b5e6-96231b3b80d8
- Besides used in SjLj exception handling, __builtin_setjmp/__longjmp is also
used as a light-weight replacement of setjmp/longjmp which are used to
implementation continuation, user-level threading, and etc. The support added
in this patch ONLY addresses this usage and is NOT intended to support SjLj
exception handling as zero-cost DWARF exception handling is used by default
in X86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165989 91177308-0d34-0410-b5e6-96231b3b80d8
includes extracting ints for copying elsewhere and inserting ints when
copying into the alloca. This should fix the CanSROA assertion coming
out of Clang's regression test suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165931 91177308-0d34-0410-b5e6-96231b3b80d8
and generally clean up the memset handling. It had rotted a bit as the
other rewriting logic got polished more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165930 91177308-0d34-0410-b5e6-96231b3b80d8
cases where we have partial integer loads and stores to an otherwise
promotable alloca to widen[1] those loads and stores to cover the entire
alloca and bitcast them into the appropriate type such that promotion
can proceed.
These partial loads and stores stem from an annoying confluence of ARM's
calling convention and ABI lowering and the FCA pre-splitting which
takes place in SROA. Clang lowers a { double, double } in-register
function argument as a [4 x i32] function argument to ensure it is
placed into integer 32-bit registers (a really unnerving implicit
contract between Clang and the ARM backend I would add). This results in
a FCA load of [4 x i32]* from the { double, double } alloca, and SROA
decomposes this into a sequence of i32 loads and stores. Inlining
proceeds, code gets folded, but at the end of the day, we still have i32
stores to the low and high halves of a double alloca. Widening these to
be i64 operations, and bitcasting them to double prior to loading or
storing allows promotion to proceed for these allocas.
I looked quite a bit changing the IR which Clang produces for this case
to be more friendly, but small changes seem unlikely to help. I think
the best representation we could use currently would be to pass 4 i32
arguments thereby avoiding any FCAs, but that would still require this
fix. It seems like it might eventually be nice to somehow encode the ABI
register selection choices outside of the parameter type system so that
the parameter can be a { double, double }, but the CC register
annotations indicate that this should be passed via 4 integer registers.
This patch does not address the second problem in PR14059, which is the
reverse: when a struct alloca is loaded as a *larger* single integer.
This patch also does not address some of the code quality issues with
the FCA-splitting. Those don't actually impede any optimizations really,
but they're on my list to clean up.
[1]: Pedantic footnote: for those concerned about memory model issues
here, this is safe. For the alloca to be promotable, it cannot escape or
have any use of its address that could allow these loads or stores to be
racing. Thus, widening is always safe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165928 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strcmp and strncmp optimizations from the
simplify-libcalls pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165915 91177308-0d34-0410-b5e6-96231b3b80d8
The new coalescer can merge a dead def into an unused lane of an
otherwise live vector register.
Clear the <dead> flag when that happens since the flag refers to the
full virtual register which is still live after the partial dead def.
This fixes PR14079.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165877 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strchr and strrchr optimizations from the
simplify-libcalls pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165875 91177308-0d34-0410-b5e6-96231b3b80d8
This patch migrates the strcat and strncat optimizations from the
simplify-libcalls pass into the instcombine library call simplifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165874 91177308-0d34-0410-b5e6-96231b3b80d8
It is possible that the live range of the value being pruned loops back
into the kill MBB where the search started. When that happens, make sure
that the beginning of KillMBB is also pruned.
Instead of starting a DFS at KillMBB and skipping the root of the
search, start a DFS at each KillMBB successor, and allow the search to
loop back to KillMBB.
This fixes PR14078.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165872 91177308-0d34-0410-b5e6-96231b3b80d8
type coercion code, especially when targetting ARM. Things like [1
x i32] instead of i32 are very common there.
The goal of this logic is to ensure that when we are picking an alloca
type, we look through such wrapper aggregates and across any zero-length
aggregate elements to find the simplest type possible to form a type
partition.
This logic should (generally speaking) rarely fire. It only ends up
kicking in when an alloca is accessed using two different types (for
instance, i32 and float), and the underlying alloca type has wrapper
aggregates around it. I noticed a significant amount of this occurring
looking at stepanov_abstraction generated code for arm, and suspect it
happens elsewhere as well.
Note that this doesn't yet address truly heinous IR productions such as
PR14059 is concerning. Those result in mismatched *sizes* of types in
addition to mismatched access and alloca types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165870 91177308-0d34-0410-b5e6-96231b3b80d8
X86 doesn't have i8 cmovs so isel would emit a branch. Emitting branches at this
level is often not a good idea because it's too late for many optimizations to
kick in. This solution doesn't add any extensions (truncs are free) and tries
to avoid introducing partial register stalls by filtering direct copyfromregs.
I'm seeing a ~10% speedup on reading a random .png file with libpng15 via
graphicsmagick on x86_64/westmere, but YMMV depending on the microarchitecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165868 91177308-0d34-0410-b5e6-96231b3b80d8
local frame causes problem.
For example:
void f(StructToPass s) {
g(&s, sizeof(s));
}
will cause problem with tail-call since part of s is passed via registers and
saved in f's local frame. When g tries to access s, part of s may be corrupted
since f's local frame is popped out before the tail-call.
The current fix is to disable tail-call if getVarArgsRegSaveSize is not 0 for
the caller. This is a conservative approach, if we can prove the address of
s or part of s is not taken and passed to g, it should be okay to perform
tail-call.
rdar://12442472
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165853 91177308-0d34-0410-b5e6-96231b3b80d8
Completely update one interval at a time instead of collecting live
range fragments to be updated. This avoids building data structures,
except for a single SmallPtrSet of updated intervals.
Also share code between handleMove() and handleMoveIntoBundle().
Add support for moving dead defs across other live values in the
interval. The MI scheduler can do that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165824 91177308-0d34-0410-b5e6-96231b3b80d8
PHIElimination inserts IMPLICIT_DEF instructions to guarantee that all
PHI predecessors have a live-out value. These IMPLICIT_DEF values are
not considered to be real interference when coalescing virtual
registers:
%vreg1 = IMPLICIT_DEF
%vreg2 = MOV32r0
When joining %vreg1 and %vreg2, the IMPLICIT_DEF instruction and its
value number should simply be erased since the %vreg2 value number now
provides a live-out value for the PHI predecesor block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165813 91177308-0d34-0410-b5e6-96231b3b80d8
On PowerPC, a bitcast of <16 x i8> to i128 may run through a code
path in ExpandRes_BITCAST that attempts to do an intermediate
bitcast to a <4 x i32> vector, and then construct the Hi and Lo parts
of the resulting i128 by pairing up two of those i32 vector elements
each. The code already recognizes that on a big-endian system, the
first two vector elements form the Hi part, and the final two vector
elements form the Lo part (vice-versa from the little-endian situation).
However, we also need to take endianness into account when forming each
of those separate pairs: on a big-endian system, vector element 0 is
the *high* part of the pair making up the Hi part of the result, and
vector element 1 is the low part of the pair. The code currently always
uses vector element 0 as the low part and vector element 1 as the high
part, as is appropriate for little-endian platforms only.
This patch fixes this by swapping the vector elements as they are
paired up as appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165802 91177308-0d34-0410-b5e6-96231b3b80d8
not legal. However, it should use a div instruction + mul + sub if divide is
legal. The rem legalization code was missing a check and incorrectly uses a
divrem libcall even when div is legal.
rdar://12481395
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165778 91177308-0d34-0410-b5e6-96231b3b80d8
to the instruction position. The old encoding would give an absolute
ID which counts up within a function, and only resets at the next function.
I.e., Instead of having:
... = icmp eq i32 n-1, n-2
br i1 ..., label %bb1, label %bb2
it will now be roughly:
... = icmp eq i32 1, 2
br i1 1, label %bb1, label %bb2
This makes it so that ids remain relatively small and can be encoded
in fewer bits.
With this encoding, forward reference operands will be given
negative-valued IDs. Use signed VBRs for the most common case
of forward references, which is phi instructions.
To retain backward compatibility we bump the bitcode version
from 0 to 1 to distinguish between the different encodings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165739 91177308-0d34-0410-b5e6-96231b3b80d8
Not all instructions define a virtual register in their first operand.
Specifically, INLINEASM has a different format.
<rdar://problem/12472811>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165721 91177308-0d34-0410-b5e6-96231b3b80d8
For function calls on the 64-bit PowerPC SVR4 target, each parameter
is mapped to as many doublewords in the parameter save area as
necessary to hold the parameter. The first 13 non-varargs
floating-point values are passed in registers; any additional
floating-point parameters are passed in the parameter save area. A
single-precision floating-point parameter (32 bits) must be mapped to
the second (rightmost, low-order) word of its assigned doubleword
slot.
Currently LLVM violates this ABI requirement by mapping such a
parameter to the first (leftmost, high-order) word of its assigned
doubleword slot. This is internally self-consistent but will not
interoperate correctly with libraries compiled with an ABI-compliant
compiler.
This patch corrects the problem by adjusting the parameter addressing
on both sides of the calling convention.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165714 91177308-0d34-0410-b5e6-96231b3b80d8
Note: [D]M{T,F}CP2 is just a recommended encoding. Vendors often provide a
custom CP2 that interprets instructions differently and may wish to add their
own instructions that use this opcode. We should ensure that this is easy to
do. I will probably add a 'has custom CP{0-3}' subtarget flag to make this
easy: We want to avoid the GCC situation where every MIPS vendor makes a custom
fork that breaks every other MIPS CPU and so can't be merged upstream.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165711 91177308-0d34-0410-b5e6-96231b3b80d8
Patch from Preston Briggs <preston.briggs@gmail.com>.
This is an updated version of the dependence-analysis patch, including an MIV
test based on Banerjee's inequalities.
It's a fairly complete implementation of the paper
Practical Dependence Testing
Gina Goff, Ken Kennedy, and Chau-Wen Tseng
PLDI 1991
It cannot yet propagate constraints between coupled RDIV subscripts (discussed
in Section 5.3.2 of the paper).
It's organized as a FunctionPass with a single entry point that supports testing
for dependence between two instructions in a function. If there's no dependence,
it returns null. If there's a dependence, it returns a pointer to a Dependence
which can be queried about details (what kind of dependence, is it loop
independent, direction and distance vector entries, etc). I haven't included
every imaginable feature, but there's a good selection that should be adequate
for supporting many loop transformations. Of course, it can be extended as
necessary.
Included in the patch file are many test cases, commented with C code showing
the loops and array references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165708 91177308-0d34-0410-b5e6-96231b3b80d8
value but later turns out to be a function.
Unfortunately, we can't fold tests into a single file because we only get one
error out of llvm-as.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165680 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
The attached is the fix to radar://11663049. The optimization can be outlined by following rules:
(select (x != c), e, c) -> select (x != c), e, x),
(select (x == c), c, e) -> select (x == c), x, e)
where the <c> is an integer constant.
The reason for this change is that : on x86, conditional-move-from-constant needs two instructions;
however, conditional-move-from-register need only one instruction.
While the LowerSELECT() sounds to be the most convenient place for this optimization, it turns out to be a bad place. The reason is that by replacing the constant <c> with a symbolic value, it obscure some instruction-combining opportunities which would otherwise be very easy to spot. For that reason, I have to postpone the change to last instruction-combining phase.
The change passes the test of "make check-all -C <build-root/test" and "make -C project/test-suite/SingleSource".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165661 91177308-0d34-0410-b5e6-96231b3b80d8
the compiler makes use of GPR0. However, there are two flavors of
GPR0 defined by the target: the 32-bit GPR0 (R0) and the 64-bit GPR0
(X0). The spill/reload code makes use of R0 regardless of whether we
are generating 32- or 64-bit code.
This patch corrects the problem in the obvious manner, using X0 and
ADDI8 for 64-bit and R0 and ADDI for 32-bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165658 91177308-0d34-0410-b5e6-96231b3b80d8
the Altivec extensions were introduced. Its use is optional, and
allows the compiler to communicate to the operating system which
vector registers should be saved and restored during a context switch.
In practice, this information is ignored by the various operating
systems using the SVR4 ABI; the kernel saves and restores the entire
register state. Setting the VRSAVE register is no longer performed by
the AIX XL compilers, the IBM i compilers, or by GCC on Power Linux
systems. It seems best to avoid this logic within LLVM as well.
This patch avoids generating code to update and restore VRSAVE for the
PowerPC SVR4 ABIs (32- and 64-bit). The code remains in place for the
Darwin ABI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165656 91177308-0d34-0410-b5e6-96231b3b80d8
- Due to the current matching vector elements constraints in
ISD::FP_ROUND, rounding from v2f64 to v4f32 (after legalization from
v2f32) is scalarized. Add a customized v2f32 widening to convert it
into a target-specific X86ISD::VFPROUND to work around this
constraints.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165631 91177308-0d34-0410-b5e6-96231b3b80d8
SDNode for LDRB_POST_IMM is invalid: number of registers added to SDNode fewer
that described in .td.
7 ops is needed, but SDNode with only 6 is created.
In more details:
In ARMInstrInfo.td, in multiclass AI2_ldridx, in definition _POST_IMM, offset
operand is defined as am2offset_imm. am2offset_imm is complex parameter type,
and actually it consists from dummy register and imm itself. As I understood
trick with dummy reg was made for AsmParser. In ARMISelLowering.cpp, this dummy
register was not added to SDNode, and it cause crash in Peephole Optimizer pass.
The problem fixed by setting up additional dummy reg when emitting
LDRB_POST_IMM instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165617 91177308-0d34-0410-b5e6-96231b3b80d8
SchedulerDAGInstrs::buildSchedGraph ignores dependencies between FixedStack
objects and byval parameters. So loading byval parameters from stack may be
inserted *before* it will be stored, since these operations are treated as
independent.
Fix:
Currently ARMTargetLowering::LowerFormalArguments saves byval registers with
FixedStack MachinePointerInfo. To fix the problem we need to store byval
registers with MachinePointerInfo referenced to first the "byval" parameter.
Also commit adds two new fields to the InputArg structure: Function's argument
index and InputArg's part offset in bytes relative to the start position of
Function's argument. E.g.: If function's argument is 128 bit width and it was
splitted onto 32 bit regs, then we got 4 InputArg structs with same arg index,
but different offset values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165616 91177308-0d34-0410-b5e6-96231b3b80d8
This patch provides initial implementation of load address
macro instruction for Mips. We have implemented two kinds
of expansions with their variations depending on the size
of immediate operand:
1) load address with immediate value directly:
* la d,j => addiu d,$zero,j (for -32768 <= j <= 65535)
* la d,j => lui d,hi16(j)
ori d,d,lo16(j) (for any other 32 bit value of j)
2) load load address with register offset value
* la d,j(s) => addiu d,s,j (for -32768 <= j <= 65535)
* la d,j(s) => lui d,hi16(j) (for any other 32 bit value of j)
ori d,d,lo16(j)
addu d,d,s
This patch does not cover the case when the address is loaded
from the value of the label or function.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165561 91177308-0d34-0410-b5e6-96231b3b80d8
DeadArgumentElimination pass can replace one LLVM function with another,
invalidating a pointer stored in debug info metadata entry for this function.
To fix this, we collect debug info descriptors for functions before
running a DeadArgumentElimination pass and "patch" pointers in metadata nodes
if we replace a function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165490 91177308-0d34-0410-b5e6-96231b3b80d8
lit -jN works on cygwin in most cases, but still sometimes I can see stalls with iterative run on the buildbot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165482 91177308-0d34-0410-b5e6-96231b3b80d8
Thanks to Benjamin for the raw test case. This one took about 50 times
longer to reduce than to fix. =/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165476 91177308-0d34-0410-b5e6-96231b3b80d8
When the CFG contains a loop with multiple entry blocks, the traces
computed by MachineTraceMetrics don't always have the same nice
properties. Loop back-edges are normally excluded from traces, but
MachineLoopInfo doesn't recognize loops with multiple entry blocks, so
those back-edges may be included.
Avoid asserting when that happens by adding an isEarlierInSameTrace()
function that accurately determines if a dominating block is part of the
same trace AND is above the currrent block in the trace.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165434 91177308-0d34-0410-b5e6-96231b3b80d8
Vector compare using altivec 'vcmpxxx' instructions have as third argument
a vector register instead of CR one, different from integer and float-point
compares. This leads to a failure in code generation, where 'SelectSETCC'
expects a DAG with a CR register and gets vector register instead.
This patch changes the behavior by just returning a DAG with the
vector compare instruction based on the type. The patch also adds a testcase
for all vector types llvm defines.
It also included a fix on signed 5-bits predicates printing, where
signed values were not handled correctly as signed (char are unsigned by
default for PowerPC). This generates 'vspltisw' (vector splat)
instruction with SIM out of range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165419 91177308-0d34-0410-b5e6-96231b3b80d8
are in fact identity operations. We detect these and kill their
partitions so that even splitting is unaffected by them. This is
particularly important because Clang relies on emitting identity memcpy
operations for struct copies, and these fold away to constants very
often after inlining.
Fixes the last big performance FIXME I have on my plate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165285 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure functions located in user specified text sections (via the
section attribute) are located together with the default text sections.
Otherwise, for large object files, the relocations for call instructions
are more likely to be out of range. This becomes even more likely in the
presence of LTO.
rdar://12402636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165254 91177308-0d34-0410-b5e6-96231b3b80d8
a) frame setup instructions define the prologue
b) we shouldn't change our location mid-stream
Add a test to make sure that the stack adjustment stays within
the prologue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165250 91177308-0d34-0410-b5e6-96231b3b80d8
We conservatively only check the first use to avoid walking long use chains.
This catches the common case of having both a load and a store to a pointer
supplied by a PHI node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165232 91177308-0d34-0410-b5e6-96231b3b80d8
cpyDest can be mutated in some cases, which would then cause a crash later if
indeed the memory was underaligned. This brought down several buildbots, so
I guess the underaligned case is much more common than I thought!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165228 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, we re-visit allocas when something changes about the way they
might be *split* to allow better scalarization to take place. However,
we weren't handling the case when the *promotion* is what would change
the behavior of SROA. When an address derived from an alloca is stored
into another alloca, we consider the first to have escaped. If the
second is ever promoted to an SSA value, we will suddenly be able to run
the SROA pass on the first alloca.
This patch adds explicit support for this form if iteration. When we
detect a store of a pointer derived from an alloca, we flag the
underlying alloca for reprocessing after promotion. The logic works hard
to only do this when there is definitely going to be promotion and it
might remove impediments to the analysis of the alloca.
Thanks to Nick for the great test case and Benjamin for some sanity
check review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165223 91177308-0d34-0410-b5e6-96231b3b80d8
was less aligned than the old. In the testcase this results in an overaligned
memset: the memset alignment was correct for the original memory but is too much
for the new memory. Fix this by either increasing the alignment of the new
memory or bailing out if that isn't possible. Should fix the gcc-4.7 self-host
buildbot failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165220 91177308-0d34-0410-b5e6-96231b3b80d8
Sorry for this being broken so long. =/
As part of this, switch all of the existing tests to be Little Endian,
which is the behavior I was asserting in them anyways! Add in a new
big-endian test that checks the interesting behavior there.
Another part of this is to tighten the rules abotu when we perform the
full-integer promotion. This logic now rejects cases where there fully
promoted integer is a non-multiple-of-8 bitwidth or cases where the
loads or stores touch bits which are in the allocated space of the
alloca but are not loaded or stored when accessing the integer. Sadly,
these aren't really observable today as the rest of the pass will
already ensure the invariants hold. However, the latter situation is
likely to become a potential concern in the future.
Thanks to Benjamin and Duncan for early review of this patch. I'm still
looking into whether there are further endianness issues, please let me
know if anyone sees BE failures persisting past this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165219 91177308-0d34-0410-b5e6-96231b3b80d8
macro instruction (li) in the assembler.
We have identified three possible expansions depending on
the size of immediate operand:
1) for 0 ≤ j ≤ 65535.
li d,j =>
ori d,$zero,j
2) for −32768 ≤ j < 0.
li d,j =>
addiu d,$zero,j
3) for any other value of j that is representable as a 32-bit integer.
li d,j =>
lui d,hi16(j)
ori d,d,lo16(j)
All of the above have been implemented in ths patch.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165199 91177308-0d34-0410-b5e6-96231b3b80d8
.set option
The patch implements following options
at - lets the assembler use the $at register for macros,
but generates warnings if the source program uses $at
noat - let source programs use $at without issuingwarnings.
noreorder - prevents the assembler from reordering machine
language instructions.
nomacro - causes the assembler to print a warning whenever
an assembler operation generates more than one
machine language instruction.
macro - lets the assembler generate multiple machine instructions
from a single assembler instruction
reorder - lets the assembler reorder machine language
instructions to improve performance
The above variants are parsed and their boolean values set or unset.
The code to actually use them will come later.
Following options are not implemented yet:
nomips16
nomicromips
move
nomove
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165194 91177308-0d34-0410-b5e6-96231b3b80d8
in the Intel syntax.
The MC layer supports emitting in the Intel syntax, but this would require the
inline assembly MachineInstr to be lowered to an MCInst before emission. This
is potential future work, but for now emitting directly from the MachineInstr
suffices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165173 91177308-0d34-0410-b5e6-96231b3b80d8
multiple stores with a single load. We create the wide loads and stores (and their chains)
before we remove the scalar loads and stores and fix the DAG chain. We attempted to merge
loads with a different chain. When that happened, the assumption that it is safe to RAUW
broke and a cycle was introduced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165148 91177308-0d34-0410-b5e6-96231b3b80d8
is not profitable in many cases because modern processors perform multiple stores
in parallel and merging stores prior to merging requires extra work. We handle two main cases:
1. Store of multiple consecutive constants:
q->a = 3;
q->4 = 5;
In this case we store a single legal wide integer.
2. Store of multiple consecutive loads:
int a = p->a;
int b = p->b;
q->a = a;
q->b = b;
In this case we load/store either ilegal vector registers or legal wide integer registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165125 91177308-0d34-0410-b5e6-96231b3b80d8
