This patch provides initial implementation of load address
macro instruction for Mips. We have implemented two kinds
of expansions with their variations depending on the size
of immediate operand:
1) load address with immediate value directly:
* la d,j => addiu d,$zero,j (for -32768 <= j <= 65535)
* la d,j => lui d,hi16(j)
ori d,d,lo16(j) (for any other 32 bit value of j)
2) load load address with register offset value
* la d,j(s) => addiu d,s,j (for -32768 <= j <= 65535)
* la d,j(s) => lui d,hi16(j) (for any other 32 bit value of j)
ori d,d,lo16(j)
addu d,d,s
This patch does not cover the case when the address is loaded
from the value of the label or function.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165561 91177308-0d34-0410-b5e6-96231b3b80d8
macro instruction (li) in the assembler.
We have identified three possible expansions depending on
the size of immediate operand:
1) for 0 ≤ j ≤ 65535.
li d,j =>
ori d,$zero,j
2) for −32768 ≤ j < 0.
li d,j =>
addiu d,$zero,j
3) for any other value of j that is representable as a 32-bit integer.
li d,j =>
lui d,hi16(j)
ori d,d,lo16(j)
All of the above have been implemented in ths patch.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165199 91177308-0d34-0410-b5e6-96231b3b80d8
use load/store fragments defined in TargetSelectionDAG.td in place of them.
Unaligned loads/stores are either expanded or lowered to target-specific nodes,
so instruction selection should see only aligned load/store nodes.
No changes in functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163960 91177308-0d34-0410-b5e6-96231b3b80d8
The assembler can alias one instruction into another based
on the operands. For example the jump instruction "J" takes
and immediate operand, but if the operand is a register the
assembler will change it into a jump register "JR" instruction.
These changes are in the instruction td file.
Test cases included
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163368 91177308-0d34-0410-b5e6-96231b3b80d8
were using a class defined for 32 bit instructions and
thus the instruction was for addiu instead of daddiu.
This was corrected by adding the instruction opcode as a
field in the base class to be filled in by the defs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161359 91177308-0d34-0410-b5e6-96231b3b80d8
or not it is in mips16 mode. Define MipsPseudo (mode-independant pseudo) and
PseudoSE (mips32/64 pseudo) classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161071 91177308-0d34-0410-b5e6-96231b3b80d8
This pass no longer requires that the global pointer value be saved to the
stack or register since it uses bal instruction to compute branch distance.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160601 91177308-0d34-0410-b5e6-96231b3b80d8
Call instructions are no longer required to be variadic, and
variable_ops should only be used for instructions that encode a variable
number of arguments, like the ARM stm/ldm instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160189 91177308-0d34-0410-b5e6-96231b3b80d8
It takes advantage of r159299 which introduces relocation support for N64.
elf-dump needed to be upgraded to support N64 relocations as well.
This passes make check.
Jack
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159302 91177308-0d34-0410-b5e6-96231b3b80d8
instruction encodings can be excluded during mips16 processing.
This revision fixes the issue raised by Jim Grosbach.
bool hasStandardEncoding() const { return !inMips16Mode(); }
When micromips is added it will be
bool StandardEncoding() const { return !inMips16Mode()&& !inMicroMipsMode(); }
No additional testing is needed other than to assure that there is no regression
from this patch.
Patch by Reed Kotler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157234 91177308-0d34-0410-b5e6-96231b3b80d8
them as machine instructions. Directives ".set noat" and ".set at" are now
emitted only at the beginning and end of a function except in the case where
they are emitted to enclose .cpload with an immediate operand that doesn't fit
in 16-bit field or unaligned load/stores.
Also, make the following changes:
- Remove function isUnalignedLoadStore and use a switch-case statement to
determine whether an instruction is an unaligned load or store.
- Define helper function CreateMCInst which generates an instance of an MCInst
from an opcode and a list of operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153552 91177308-0d34-0410-b5e6-96231b3b80d8
reserving a physical register ($gp or $28) for that purpose.
This will completely eliminate loads that restore the value of $gp after every
function call, if the register allocator assigns a callee-saved register, or
eliminate unnecessary loads if it assigns a temporary register.
example:
.cpload $25 // set $gp.
...
.cprestore 16 // store $gp to stack slot 16($sp).
...
jalr $25 // function call. clobbers $gp.
lw $gp, 16($sp) // not emitted if callee-saved reg is chosen.
...
lw $2, 4($gp)
...
jalr $25 // function call.
lw $gp, 16($sp) // not emitted if $gp is not live after this instruction.
...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151402 91177308-0d34-0410-b5e6-96231b3b80d8
versions derive from them.
- JALR64 is not needed since N64 does not emit jal.
- Add template parameter to BranchLink that sets the rt field.
- Fix the set of temporary registers for O32 and N64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147518 91177308-0d34-0410-b5e6-96231b3b80d8
instruction supported by mips32r2, and add a pattern which replaces bswap with
a ROTR and WSBH pair.
WSBW is removed since it is not an instruction the current architectures
support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147015 91177308-0d34-0410-b5e6-96231b3b80d8
- Modify lowering of global TLS address nodes.
- Modify isel of ThreadPointer.
- Wrap target global TLS address nodes that are operands of loads with WrapperPIC.
- Remove Mips-specific DAG nodes TlsGd, TprelHi and TprelLo, which can be
substituted with other existing nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146175 91177308-0d34-0410-b5e6-96231b3b80d8
- lower unaligned loads/stores.
- encode the size operand of instructions INS and EXT.
- emit relocation information needed for JAL (jump-and-link).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145113 91177308-0d34-0410-b5e6-96231b3b80d8
"With this patch we can now generate runnable Mips code through LLVM
direct object emission. We have run numerous simple programs, both C
and C++ and with -O0 and -O3 from the output. The code is not production
ready, but quite useful for experimentation." Patch and message by
Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144414 91177308-0d34-0410-b5e6-96231b3b80d8
-Fix binary codes and rename operands in .td files so that automatically
generated function MipsCodeEmitter::getBinaryCodeForInstr gives correct
encoding for instructions.
-Define new class FMem for instructions that access memory.
-Define new class FFRGPR for instructions that move data between GPR and
FPU general and control registers.
-Define custom encoder methods for memory operands, and also for size
operands of ext and ins instructions.
-Only static relocation model is currently implemented.
Patch by Sasa Stankovic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142378 91177308-0d34-0410-b5e6-96231b3b80d8
expanding conditional moves, which is not needed since architectures that lack
support for conditional moves have been removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142226 91177308-0d34-0410-b5e6-96231b3b80d8
arithmetic and logical instructions with three register operands derive from
them. Fix instruction encoding too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141736 91177308-0d34-0410-b5e6-96231b3b80d8
that have 64-bit pointers or access the 32 x 64-bit floating pointer register
file. Update functions in MipsInstrInfo.cpp too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141623 91177308-0d34-0410-b5e6-96231b3b80d8
for 64-bit load and store instructions. Add definitions of 64-bit memory operand
and 16-bit immediate operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141603 91177308-0d34-0410-b5e6-96231b3b80d8
moving them out of the loop. Previously, stores and loads to a stack frame
object were inserted to accomplish this. Remove the code that was needed to do
this. Patch by Sasa Stankovic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135415 91177308-0d34-0410-b5e6-96231b3b80d8
before the offset. This change will enable simplification of function
MipsRegisterInfo::eliminateFrameIndex.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134625 91177308-0d34-0410-b5e6-96231b3b80d8
nand), atomic.swap and atomic.cmp.swap, all in i8, i16 and i32 versions.
The intrinsics are implemented by creating pseudo-instructions, which are
then expanded in the method MipsTargetLowering::EmitInstrWithCustomInserter.
Patch by Sasa Stankovic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132323 91177308-0d34-0410-b5e6-96231b3b80d8
bunch of associated comments, because it doesn't have anything to do
with DAGs or scheduling. This is another step in decoupling MachineInstr
emitting from scheduling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85517 91177308-0d34-0410-b5e6-96231b3b80d8
parameters instead of raw Constants. This prevents the constants from
being selected by the isel pass, fixing PR2735.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57385 91177308-0d34-0410-b5e6-96231b3b80d8
with ConstantInt. This led to fixing a bug in TargetLowering.cpp
using getValue instead of getAPIntValue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56159 91177308-0d34-0410-b5e6-96231b3b80d8
is lowered properly and covers everything LowerSELECT_CC did.
Added method printUnsignedImm in AsmPrinter to print uimm16 operands. This
avoid the ugly instruction by instruction checking in printOperand.
Added a swap instruction present in the allegrex core.
Added two conditional instructions present in the allegrex core : MOVZ and MOVN.
They both allow a more efficient SELECT operation for integers.
Also added SELECT patterns to optimize MOVZ and MOVN usage.
The brcond and setcc patterns were cleaned: redundant and suboptimal patterns
were
removed. The suboptimals were replaced by more efficient ones.
Fixed some instructions that were using immZExt16 instead of immSExt16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54724 91177308-0d34-0410-b5e6-96231b3b80d8
Added fp register clobbering during calls.
Added AsmPrinter support for "fmask", a bitmask that indicates where on the
stack the fp callee saved registers are.
Fixed the stack frame layout for Mips, now the callee saved regs
are in the right stack location (a little documentation about how this
stack frame must look like is present in MipsRegisterInfo.cpp).
This was done using the method MipsRegisterInfo::adjustMipsStackFrame
To be more clear, these are examples of what is solves :
1) FP and RA are also callee saved, and despite they aren't in CSI they
must be saved before the fp callee saved registers.
2) The ABI requires that local varibles are allocated before the callee
saved register area, the opposite behavior from the default allocation.
3) CPU and FPU saved register area must be aligned independent of each
other.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54403 91177308-0d34-0410-b5e6-96231b3b80d8
Added hi,lo registers to be used,def implicitly. This provides better handle of
instructions which use hi/lo.
Fixes a small BranchAnalysis bug
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54274 91177308-0d34-0410-b5e6-96231b3b80d8
Added gp_rel relocations to support addressing small section contents.
Added command line to specify small section threshold in bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53869 91177308-0d34-0410-b5e6-96231b3b80d8
Added HasABICall and HasAbsoluteCall (equivalent to gcc -mabicall and
-mno-shared). HasAbsoluteCall is not implemented but HasABICall is the
default for o32 ABI. Now, both should help into a more accurate
relocation types implementation.
Added IsLinux is needed to choose between asm directives.
Instruction name strings cleanup.
AsmPrinter improved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53551 91177308-0d34-0410-b5e6-96231b3b80d8
important.
- Cleanup in the Subtarget info with addition of new features, not all support
yet, but they allow the future inclusion of features easier. Among new features,
we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit
integer
and float registers, allegrex vector FPU (VFPU), single float only support.
- TargetMachine now detects allegrex core.
- Added allegrex (Mips32r2) sext_inreg instructions.
- *Added Float Point Instructions*, handling single float only, and
aliased accesses for 32-bit FPUs.
- Some cleanup in FP instruction formats and FP register classes.
- Calling conventions improved to support mips 32-bit EABI.
- Added Asm Printer support for fp cond codes.
- Added support for sret copy to a return register.
- EABI support added into LowerCALL and FORMAL_ARGS.
- MipsFunctionInfo now keeps a virtual register per function to track the
sret on function entry until function ret.
- MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...),
FP cond codes mapping and initial FP Branch Analysis.
- Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond,
FPCmp
- MipsTargetLowering : handling different FP classes, Allegrex support, sret
return copy, no homing location within EABI, non 32-bit stack objects
arguments, and asm constraint for float.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
MUL is not anymore directly matched because its a pseudoinstruction.
LogicI class fixed to zero-extend immediates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52036 91177308-0d34-0410-b5e6-96231b3b80d8
1. Legalize now always promotes truncstore of i1 to i8.
2. Remove patterns and gunk related to truncstore i1 from targets.
3. Rename the StoreXAction stuff to TruncStoreAction in TLI.
4. Make the TLI TruncStoreAction table a 2d table to handle from/to conversions.
5. Mark a wide variety of invalid truncstores as such in various targets, e.g.
X86 currently doesn't support truncstore of any of its integer types.
6. Add legalize support for truncstores with invalid value input types.
7. Add a dag combine transform to turn store(truncate) into truncstore when
safe.
The later allows us to compile CodeGen/X86/storetrunc-fp.ll to:
_foo:
fldt 20(%esp)
fldt 4(%esp)
faddp %st(1)
movl 36(%esp), %eax
fstps (%eax)
ret
instead of:
_foo:
subl $4, %esp
fldt 24(%esp)
fldt 8(%esp)
faddp %st(1)
fstps (%esp)
movl 40(%esp), %eax
movss (%esp), %xmm0
movss %xmm0, (%eax)
addl $4, %esp
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46140 91177308-0d34-0410-b5e6-96231b3b80d8
instead of "ISD::STORE". This allows us to mark target-specific dag
nodes as storing (such as ppc byteswap stores). This allows us to remove
more explicit isStore flags from the .td files.
Finally, add a warning for when a .td file contains an explicit
isStore and tblgen is able to infer it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45654 91177308-0d34-0410-b5e6-96231b3b80d8
adjustment fields, and an optional flag. If there is a "dynamic_stackalloc" in
the code, make sure that it's bracketed by CALLSEQ_START and CALLSEQ_END. If
not, then there is the potential for the stack to be changed while the stack's
being used by another instruction (like a call).
This can only result in tears...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44037 91177308-0d34-0410-b5e6-96231b3b80d8
MipsAdd SDNode created to add support to an Add opcode which supports input flag
Added an instruction itinerary to all instruction classes
Added branches with zero cond codes
Now call clobbers all non-callee saved registers
Call w/ register support added
Added DelaySlot to branch and load instructions
Added patterns to handle all setcc, brcond/setcc and MipsAdd instructions
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41161 91177308-0d34-0410-b5e6-96231b3b80d8
